87 results (0,20622 seconds)

Show all filters

Brand

Size

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Knipex High Leverage End Cutting Nipper 160mm KPX6701160

Knipex High Leverage End Cutting Nipper 160mm KPX6701160

Knipex 67 01 Series High Leverage End Cutting Nippers have cutting edges suitable for soft, hard and piano wire. High cutting capacity with little required effort due to optimum co-ordination of cutting edge angle and transmission ratio. Made from forged heavy-duty chrome vanadium steel that has been oil-hardened, multiple times. Black atramentized finish with a polished head. The cutting edges have been additionally induction hardened, approx. 64 HRC. Fitted with plastic coated handles for increased comfort. Cutting Capacity :67 01 140: Soft 4mm, Medium-Hard 3.1mm, Hard 2mm, Piano Wire 1.5mm67 01 160: Soft 4.5mm, Medium-Hard 3.4mm, Hard 2.5mm, Piano Wire 2mm67 01 200: Soft 5mm, Medium-Hard 3.8mm, Hard 3mm, Piano Wire: 2.5mm

GBP 0.00
1

Knipex High Leverage End Cutting Nipper 140mm KPX6701140

Knipex High Leverage End Cutting Nipper 140mm KPX6701140

Knipex 67 01 Series High Leverage End Cutting Nippers have cutting edges suitable for soft, hard and piano wire. High cutting capacity with little required effort due to optimum co-ordination of cutting edge angle and transmission ratio. Made from forged heavy-duty chrome vanadium steel that has been oil-hardened, multiple times. Black atramentized finish with a polished head. The cutting edges have been additionally induction hardened, approx. 64 HRC. Fitted with plastic coated handles for increased comfort. Cutting Capacity :67 01 140: Soft 4mm, Medium-Hard 3.1mm, Hard 2mm, Piano Wire 1.5mm67 01 160: Soft 4.5mm, Medium-Hard 3.4mm, Hard 2.5mm, Piano Wire 2mm67 01 200: Soft 5mm, Medium-Hard 3.8mm, Hard 3mm, Piano Wire: 2.5mm

GBP 0.00
1

Knipex ESD Electronics Diagonal Cutters - Pointed Head Small Bevel 115mm KPX7732ESD

Knipex ESD Electronics Diagonal Cutters - Pointed Head Small Bevel 115mm KPX7732ESD

Knipex 77 Series electronic diagonal cutter with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. Ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish, together with a fine film of oil, offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. 57 HRC. Cutting Capacity: 77 02 ESD: Round Bevel Head, Hard: 0.60mm, Medium: 1.20mm, Soft: 0.3-1.6mm. 77 32 ESD: Pointed Bevel Head, Hard: 0.50mm, Medium: 1.0mm, Soft: 0.3-1.3mm. 77 42 ESD: Pointed Non-Bevel Flush Cut Head, Medium: 0.80mm, Soft: 0.3-1.3mm.

GBP 49.99
1

Knipex High Leverage End Cutting Nipper 200mm KPX6701200

Knipex High Leverage End Cutting Nipper 200mm KPX6701200

Knipex 67 01 Series High Leverage End Cutting Nippers have cutting edges suitable for soft, hard and piano wire. High cutting capacity with little required effort due to optimum co-ordination of cutting edge angle and transmission ratio. Made from forged heavy-duty chrome vanadium steel that has been oil-hardened, multiple times. Black atramentized finish with a polished head. The cutting edges have been additionally induction hardened, approx. 64 HRC. Fitted with plastic coated handles for increased comfort. Cutting Capacity :67 01 140: Soft 4mm, Medium-Hard 3.1mm, Hard 2mm, Piano Wire 1.5mm67 01 160: Soft 4.5mm, Medium-Hard 3.4mm, Hard 2.5mm, Piano Wire 2mm67 01 200: Soft 5mm, Medium-Hard 3.8mm, Hard 3mm, Piano Wire: 2.5mm

GBP 45.99
1

Knipex ESD Electronics Diagonal Cutters - Pointed Head Flush Cut Non Bevelled 115mm KPX7742ESD

Knipex ESD Electronics Diagonal Cutters - Pointed Head Flush Cut Non Bevelled 115mm KPX7742ESD

Knipex 77 Series electronic diagonal cutter with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. Ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish, together with a fine film of oil, offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. 57 HRC. Cutting Capacity: 77 02 ESD: Round Bevel Head, Hard: 0.60mm, Medium: 1.20mm, Soft: 0.3-1.6mm. 77 32 ESD: Pointed Bevel Head, Hard: 0.50mm, Medium: 1.0mm, Soft: 0.3-1.3mm. 77 42 ESD: Pointed Non-Bevel Flush Cut Head, Medium: 0.80mm, Soft: 0.3-1.3mm.

GBP 49.99
1

Knipex ESD Electronics Diagonal Cutters - Round Head Small Bevel 115mm KPX7702ESD

Knipex ESD Electronics Diagonal Cutters - Round Head Small Bevel 115mm KPX7702ESD

Knipex 77 Series electronic diagonal cutter with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. Ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish, together with a fine film of oil, offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. 57 HRC. Cutting Capacity: 77 02 ESD: Round Bevel Head, Hard: 0.60mm, Medium: 1.20mm, Soft: 0.3-1.6mm. 77 32 ESD: Pointed Bevel Head, Hard: 0.50mm, Medium: 1.0mm, Soft: 0.3-1.3mm. 77 42 ESD: Pointed Non-Bevel Flush Cut Head, Medium: 0.80mm, Soft: 0.3-1.3mm.

GBP 44.99
1

Knipex Diagonal Cutter Counter Display KPX001801V06

Knipex Diagonal Cutter Counter Display KPX001801V06

Knipex 00 18 01 V06 Counter display containing 10 x KPX7002160 Diagonal Cutters 160mm with comfort multi-component grips. The grips are constructed from chrome vanadium steel, oil hardened, and tempered. The cutting edge is induction hardened to approx 62HRC making them ideal for cutting soft, medium & hard wire. Narrow head with long cutting edge gives good access in confined areas, Strong precision rivet for even movement and long service life. Cutting Capacity Soft Wire 4.0mm, Medium Wire 3.0mm, Hard Wire 2.0mm

GBP 239.99
1

002011 Professional Plier Set (3 Piece)

002011 Professional Plier Set (3 Piece)

Knipex 00 20 11 Professional Plier Set with polished heads The Knipex 002011 Professional Plier Set contains the 03 02 180 Combination Pliers, 26 12 200 Snipe Nose Side Cutting Pliers, (Stork Beak Pliers) and 70 02 160 Diagonal Cutters. Features: Polished heads Multi-component grips on handles Black atramentized finish to inhibit corrosion Specification: Combination Pliers: Length: 180mm Net weight: 0.254kg Cutting capacities hard wire (diameter): 2.2mm Cutting capacities medium hard wire (diameter): 3.4mm Cutting capacity copper cable, multiple-stranded: 16 mm Cutting capacity copper cable, multiple-stranded (diameter): 12.0mm Snipe Nose Side Cutting Pliers: Length: 200mm Net weight: 0.201kg Cutting capacities hard wire (diameter): 2.2mm Cutting capacities medium hard wire (diameter): 3.2mm Diagonal Cutters: Length: 160mm Net weight: 0.206kg Cutting capacities soft wire (diameter): 4.0mm Cutting capacities hard wire (diameter): 2.0mm Cutting capacities medium hard wire (diameter): 3.0mm

GBP 0.00
2

Knipex VDE Snipe Nose Side Cutting Pliers (Radio) 160mm

Knipex VDE Snipe Nose Side Cutting Pliers (Radio) 160mm

These Knipex 25 06 Series Snipe Nose Cutting Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from vanadium electric steel, forged, multi stage oil-hardened. Chrome plated finish. Half-round, long, tapered jaws with knurled gripping surfaces. With cutting edges for medium hard and hard wire. The cutting edges are additionally induction hardened, cutting edge hardness approx. 61 HRC. They are suitable for finer gripping and cutting work. Also known as a radio pliers. Specification Cutting Capacity: Hard Wire : 1.6mm, Medium Wire: 2.5mm

GBP 33.99
1

Knipex 2616200SB Snipe Nose Side Cutting Pliers VDE 1000V 200mm

Knipex 2616200SB Snipe Nose Side Cutting Pliers VDE 1000V 200mm

Snipe Nose Side Cutting Pliers VDE tested for electricians and fitters The Knipex 2616200SB (carded) are Stork Beak Pliers for professional installation, assembly work, and for cutting. The cutting edges of the pliers are shaped to produce a bite type cut. The cutting edges are additionally induction hardened to approx. 61 HRC so that the pliers can even be used to cut hard wire. The precision tips made of vanadium electric steel are elastic and stable when twisted. This allows the manual force deployed using these pliers to be well measured, which is a particular benefit with delicate components. The needle nose pliers can also be used for powerful gripping and holding and for cutting. Thanks to the position of the cutting edges near the joint which is advantageous for the transmission of force, good cutting capacities are achieved. Medium-hard wire can be cut up to ? 3.2 mm and hard wire up to ? 2.2 mm. In the control cabinet, on a machine, on an electric motor, when feeding and connecting wire to terminals, in junction boxes, in control cabinet construction: the VDE tested Knipex 26 16 200 is in its element wherever space is tight. The qualities of the snipe nose side cutting pliers from Knipex will be immediately apparent when lines and wires need to be held, fed and cut. The quality chrome plating offers good protection against dirt and corrosion. This corrosion resistance makes special sense when the pliers are kept permanently in the service vehicle, where they may be exposed to condensation caused by temperature changes. Features: Elastic tips: dimensionally stable even when twisted Distortion-tolerant, elastic precision tips Half-round, long, tapered jaws With cutting edges for soft, medium-hard and hard wire Cutting edges additionally induction-hardened, cutting edge hardness approx. 61 HRC Straight jaws Vanadium electric steel, forged, multi stage oil-hardened Specification: Part number: 2616200SB Pliers: chrome plated Head: chrome plated Handles: insulated with multi-component grips, VDE-tested Dimensions: 200 x 56 x 19 mm Standard: DIN ISO 5745 DIN EN 60900 IEC 60900 Tips width: 3.0 mm Tips thickness: 2.5 mm Head width (W3): 18 mm Style: 1 VDE tested: yes Weight: 0206kg

GBP 39.99
2

Knipex Elektro VDE Pliers Set, 3 Piece KPX002012

Knipex Elektro VDE Pliers Set, 3 Piece KPX002012

This Knipex Elektro VDE Pliers Set contains a selection of the most popular VDE pliers. All pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. The slipguard prevents any spark over from non-insulated head to the hand. The heads are chrome plated for durability. Contains the following 1 x 03 06 180 VDE Combination Pliers 180mm made from a top quality special tool steel, forged and oil-hardened to approximately 60 HRC for added strength and durability. It has longer cutting edges for thicker cables and gripping zones for flat and round materials. Cutting Capacity Hard 2.2mm, Medium Hard 3.4mm, Multi-Strand 12.0mm 1 x 26 16 200 VDE Snipe Nose Cutting Pliers 200mm made from vanadium electric steel, forged, multi stage oil-hardened. The long half round jaws are distortion-tolerant and feature elastic precision tips and knurled gripping surfaces. With cutting edges for medium hard and hard wire. The cutting edges are additionally induction hardened, cutting edge hardness approx. 61 HRC. Ideal for all electrical instillation applications. Cutting Capacity Hard 2.2mm, Medium 3.2mm 1 x 70 06 160 VDE Diagonal Cutter 160mm with a narrow head style for use in confined areas. Forged, vanadium electric steel, multi stage oil-hardened. Precision cutting edges for soft and hard wire, additionally induction hardened, approx. 62 HRC. Precision cutting edges for soft and hard wire. Provides clean cutting of thin copper wires, also at the cutting-edge tips. Cutting Capacity Hard 2.0mm, Medium 2.8mm, Soft 4.0mm

GBP 99.99
1

Knipex 2612200SB Snipe Nose Side Cutting Pliers 200mm

Knipex 2612200SB Snipe Nose Side Cutting Pliers 200mm

Snipe Nose Side Cutting Pliers are additionally induction hardened, so suitable for cutting hard wire The Knipex 2612200SB are made for gripping, aligning and installation work and for cutting. Knipex primarily manufactures the forged and oil-hardened snipe nose side cutting pliers for gripping, alignment and installation work. They deliver a second function in these areas that is important for assembly work. Their cutting edges are shaped to produce a bite type cut. Thanks to the induction hardening of the cutting edges to approx. 61 HRC, cutting capacities of up to 2.2 mm are produced on hard wire. Inherently stable when twisted particularly strong when cutting. The precision tips of the pliers made of vanadium electric steel are elastic. This allows the manual force deployed to be well measured forcefully where necessary. The cutting edges are near the joint which is advantageous for the transmission of force. The cutting capacities of 3.2 mm achieved for medium-hard wire and 2.2 mm for hard wire are impressive for professional users. It is possible to reach areas in engine or machine rooms that are difficult to access. The very long tips of the Knipex 26 12 200 make it possible to grip low-lying components accurately and powerfully. Anyone who needs to attach a refrigerant pipe to the air conditioning evaporator or connect a hose onto a difficult to reach nozzle will immediately appreciate the qualities of the snipe nose side cutting pliers. Features: Distortion-tolerant, elastic precision tips Half-round, long, tapered jaws With cutting edges (hardness approx. 61 HRC) for soft, medium-hard and hard wire Straight jaws Vanadium electric steel, forged, multi stage oil-hardened Specification: Part number: 26 12 200 SB Dimensions 200 x 115 x 19 mm Standard DIN ISO 5745 Weight: 0.223kg

GBP 0.00
2

Knipex 26 11 200 SB Snipe Nose Sidecutting Pliers 200mm

Knipex 26 11 200 SB Snipe Nose Sidecutting Pliers 200mm

With straight jaws and a snipe nose these side cutting pliers from Knipex are a tool predominantly used for assembly and installation work in poorly accessible areas. A quality and reliable tool that allows a variety of professionals to work in confined spaces and deliver with ease. Features and Benefits Manufactured from a vanadium electric steel for durability Products are oil hardened and cutting edges are induction hardened to hold a strong cutting edge The product's elastic tips provide a good dimensionally stable even when twisted Typical Applications Ideal for use in awkward or hard to reach areas due to their long nose and side cutting action Cutting edges are suited for soft, medium-hard and hard wire Standards DIN ISO 5745

GBP 22.99
2

Knipex VDE Long Bent Snipe Nose Side Cutting Pliers 200mm KPX2626200

Knipex VDE Long Bent Snipe Nose Side Cutting Pliers 200mm KPX2626200

These Knipex 26 26 Series Snipe Nose Side Cutting Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from vanadium electric steel, forged, multi stage oil-hardened. Chrome plated finish. The long half round jaws are distortion-tolerant and feature elastic precision tips and knurled gripping surfaces. The jaws are angled at 40 with cutting edges for medium hard and hard wire. The cutting edges are additionally induction hardened, cutting edge hardness approx. 61 HRC. Ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicle applications. Specification Cutting Capacity Hard Wire 2.2mm, Medium Wire 3.2mm Length 200mm

GBP 49.99
2

Knipex VDE Pliers Set in Case, 4 Piece KPX002015

Knipex VDE Pliers Set in Case, 4 Piece KPX002015

The Knipex 4 Piece 00 20 15 VDE Pliers Set contains a selection of the most popular VDE pliers. All pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. The slip guard prevents any spark over from the non-insulated head to the hand. The heads are chrome plated for durability. Supplied in a high-quality, shock-resistant plastic case. Contains the following 1 x 03 06 180 VDE Combination Pliers 180mm made from top-quality special tool steel, forged and oil-hardened to approximately 60 HRC for added strength and durability. It has longer cutting edges for thicker cables and gripping zones for flat and round materials. Cutting Capacity Hard 2.2mm, Medium Hard 3.4mm, Multi-Strand 12.0mm 1 x 26 16 200 VDE Snipe Nose Cutting Pliers 200mm made from vanadium electric steel, forged, multi-stage oil-hardened. The long half-round jaws are distortion-tolerant and feature elastic precision tips and knurled gripping surfaces with cutting edges for medium hard and hard wire. The cutting edges are additionally induction hardened, cutting edge hardness approx. 61 HRC. Ideal for all electrical installation applications. Cutting Capacity Hard 2.2mm, Medium 3.2mm 1 x 70 06 160 VDE Diagonal Cutter 160mm with a narrow head style for use in confined areas. Forged, vanadium electric steel, multi-stage oil-hardened. Precision cutting edges for soft and hard wire, additionally, induction hardened, approx. 62 HRC. Precision cutting edges for soft and hard wire. Provides clean cutting of thin copper wires, also at the cutting-edge tips. Cutting Capacity Hard 2.0mm, Medium 2.8mm, Soft 4.0mm 1 x 11 06 160 VDE Insulation Strippers 160mm made from special tool steel, forged, oil-hardened. Easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut. For stripping single, multiple and fine stranded conductors with plastic or rubber insulation.

GBP 152.99
1

Knipex 4-in-1 Electrician's Pliers Multi-Component Grip 160mm (6.1/4in) KPX1302160

Knipex 4-in-1 Electrician's Pliers Multi-Component Grip 160mm (6.1/4in) KPX1302160

The Knipex 13 Series 4-in-1 Electrician's Pliers are made from forged chrome vanadium electric steel, then oil-hardened. Ideal for cable work: cutting, stripping, crimping, gripping and bending. Precision stripping holes and cutting edges are separately induction-hardened, hardness approximately 60HRc for crimping end sleeves. Available with a PVC or Multi-Component grip. Specification Cutting Capacity: Hard: 1.6mm, Medium: 2.5mm.Stripping Capacity: 0.5-0.75mm, 1.5mm, 2.5mm.

GBP 49.99
1

Knipex 4-in-1 Electrician's Pliers PVC Grip 160mm (6.1/4in) KPX1301160

Knipex 4-in-1 Electrician's Pliers PVC Grip 160mm (6.1/4in) KPX1301160

The Knipex 13 Series 4-in-1 Electrician's Pliers are made from forged chrome vanadium electric steel, then oil-hardened. Ideal for cable work: cutting, stripping, crimping, gripping and bending. Precision stripping holes and cutting edges are separately induction-hardened, hardness approximately 60HRc for crimping end sleeves. Available with a PVC or Multi-Component grip. Specification Cutting Capacity: Hard: 1.6mm, Medium: 2.5mm.Stripping Capacity: 0.5-0.75mm, 1.5mm, 2.5mm.

GBP 43.99
1

Knipex VDE X-Cut Compact Diagonal Cutter 160mm KPX7306160

Knipex VDE X-Cut Compact Diagonal Cutter 160mm KPX7306160

The Knipex 73-06 Series X-Cut Diagonal Cutters are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. This box joint diagonal cutter is compact, light and simultaneously powerful and highly precise. With its wide range of cutting abilities, it offers versatility in industry, trades and crafts. The X-Cut cuts through the finest strands with great precision, has the force required for easy cutting hard piano wire, and features a large jaw opening for multi-stranded cables. When cutting a medium-hard wire ( 3 mm) the X-Cut requires about 20% less force than a conventional diagonal cutter of the same size. Further user-friendly advantages are provided by the box joint design with easy, zero-backlash movement and a slim head shape for easy access even when working in confined areas. Specification Cutting Capacity Soft 4.8mm, Medium Hard 3.8mm, Hard 2.7mm, Piano Wire 2.2mm, Multi-Stranded 12mm

GBP 56.99
1

Knipex Snipe Nose Chrome Plated Side Cutting Pliers 200mm

Knipex Snipe Nose Chrome Plated Side Cutting Pliers 200mm

These long nose side cutters have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter 2.2mm and medium wire diameter 3.2 mm. The cutting edges are separately induction hardened for durability and longer working life. They are 200mm/8-inch long and have a two-component comfort handles. Available in either a chrome plated finish or atramentised black. Features and Benefits Elastic tips are dimensionally stable even when twisted and are highly loadble for precision working Half-round, long, tapered jaws allow access even in confined and awkward spaces With cutting edges (hardness approx. 61 HRC) for soft, medium-hard and hard wire for versatility of use Manufactured from vanadium electric steel, forged, multi stage oil-hardened for ultimate durability Available either in a black atramentised finish or chrome plated depending on your preferences Knurled gripping surfaces are effective at gripping and cutting Typical Applications Electrical DIY Construction

GBP 31.99
1

Knipex Snipe Nose Black Atramentized Side Cutting Pliers 200mm

Knipex Snipe Nose Black Atramentized Side Cutting Pliers 200mm

These long nose side cutters have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter 2.2mm and medium wire diameter 3.2 mm. The cutting edges are separately induction hardened for durability and longer working life. They are 200mm/8-inch long and have a two-component comfort handles. Available in either a chrome plated finish or atramentised black. Features and Benefits Elastic tips are dimensionally stable even when twisted and are highly loadble for precision working Half-round, long, tapered jaws allow access even in confined and awkward spaces With cutting edges (hardness approx. 61 HRC) for soft, medium-hard and hard wire for versatility of use Manufactured from vanadium electric steel, forged, multi stage oil-hardened for ultimate durability Available either in a black atramentised finish or chrome plated depending on your preferences Knurled gripping surfaces are effective at gripping and cutting Typical Applications Electrical DIY Construction

GBP 25.99
1

Knipex VDE Diagonal Insulation Stripper & Side Cutter 160mm KPX1426160

Knipex VDE Diagonal Insulation Stripper & Side Cutter 160mm KPX1426160

The Knipex 14 26 Series VDE Side Cutters/Wire Strippers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from top quality Vanadium electric special tool steel and have been forged and oil hardened. Chrome plated finish. They have flat round jaws for gripping surfaces and, with the serrated edge, will give a better grip on the workpiece. The cutting edges will give the user a good clean cut. These Knipex pliers have precision stripping holes for single (solid) conductors of 1.5 and 2.5 mm and are suitable for gripping and cutting work in precision mechanics. The heavy-duty induction hardened precision blades are ideal for soft wire up to 4.0mm diameter and are hardened to approximately 60 HRC. The cutting edges are suitable for cutting medium hard wire with a diameter of up to 4.0mm and single (solid) conductors of 1.5 and 2.5 mm with ease. Specification Cutting Capacity (mm): Medium: 1.5, Soft: 2.5Stripping Capacities: 1.5 + 2.5mmAWG: 15+13Length: 160mm

GBP 53.99
2