37 results (0,17046 seconds)

Show all filters

Brand

Colour

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

KAISER + KRAFT GMBH Pull-out Shelf for Space Pallet Racking WxD 890 x 1150mm Max. Shelf Load 300 kg

KAISER + KRAFT GMBH Pull-out Shelf for Space Pallet Racking WxD 890 x 1150mm Max. Shelf Load 300 kg

Pull-out shelf for Space pallet racking, WxD 890 x 1150 mm, max. shelf load 300 kg. Supplied = flat pack. Width = 890 mm. Depth = 1100 mm. Material = steel. Colour = zinc plated. Max. load = 300 kg. Product type = accessories for pallet racking. Maximisation of order picking stations for goods without pallet handling. Optimisation of the time needed for order picking by increasing the number of picking stations. Pull-out shelf for installation in Space pallet racking. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. All load bearing components are labelled with the max. load.

GBP 499.99
1

KAISER + KRAFT GMBH Shelf for Space Pallet Racking WxD 455 x 1100mm Max. Shelf Load 200 kg

KAISER + KRAFT GMBH Shelf for Space Pallet Racking WxD 455 x 1100mm Max. Shelf Load 200 kg

Shelf for Space pallet racking, WxD 455 x 1100 mm, max. shelf load 200 kg. Supplied = flat pack. Width = 455 mm. Depth = 1100 mm. Material = steel. Colour = zinc plated. Max. load = 200 kg. Product type = accessories for pallet racking. Beam levels for storage of goods without pallets. Suitable if you wish to store individual goods in your pallet racking. Space pallet racking units are robust pallet racking units made of steel. The complete pallet racking consists of just two components, the upright frames and the beams. All load bearing components are labelled with the max. load.

GBP 79.99
1

KAISER + KRAFT GMBH Mesh Shelf for Space Pallet Racking WxD 910 x 1100mm Max. Load 400 kg

KAISER + KRAFT GMBH Mesh Shelf for Space Pallet Racking WxD 910 x 1100mm Max. Load 400 kg

Mesh shelf for Space pallet racking, WxD 910 x 1100 mm, max. load 400 kg. Supplied = flat pack. Width = 910 mm. Depth = 1100 mm. Material = steel. Max. load = 400 kg. Colour = zinc plated. Product type = accessories for pallet racking. Optimise your pallet racking with the right accessories. Complies with the new standard for pallet racking EN:15512:2020. Mesh shelf for order picking goods with or without pallets. Mesh shelf for order picking goods with or without pallets. Approved for a sprinkler system. Can be used as anti-collapse device for lorry access. Width 910 mm. Mesh shelf for Space pallet racking, WxD 910 x 1100 mm. Space pallet racking is robust pallet racking made of steel. The complete pallet racking consists of just two components, the upright frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more.

GBP 99.99
1

KAISER + KRAFT GMBH Mesh Shelf for Space Pallet Racking WxD 910 x 1100mm Max. Load 1000 kg

KAISER + KRAFT GMBH Mesh Shelf for Space Pallet Racking WxD 910 x 1100mm Max. Load 1000 kg

Mesh shelf for Space pallet racking, WxD 910 x 1100 mm, max. load 1000 kg. Supplied = flat pack. Width = 910 mm. Depth = 1100 mm. Material = steel. Max. load = 1000 kg. Colour = zinc plated. Product type = accessories for pallet racking. Optimise your pallet racking with the right accessories. Complies with the new standard for pallet racking EN:15512:2020. Mesh shelf for order picking goods with or without pallets. Mesh shelf for order picking goods with or without pallets. Approved for a sprinkler system. Can be used as anti-collapse device for lorry access. Width 910 mm. Mesh shelf for Space pallet racking, WxD 910 x 1100 mm. Space pallet racking is robust pallet racking made of steel. The complete pallet racking consists of just two components, the upright frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more.

GBP 109.99
1

KAISER + KRAFT GMBH Drip Tray for Cantilever Arm Shelf Trolleys Pack of 2 LxW 1709 x 400mm

KAISER + KRAFT GMBH Drip Tray for Cantilever Arm Shelf Trolleys Pack of 2 LxW 1709 x 400mm

Drip tray, for cantilever arm shelf trolleys, pack of 2, LxW 1709 x 400 mm. Material = steel. Colour = zinc plated. Length = 1709 mm. Width = 400 mm. Product type = accessories. Accessory for eurokraft pro cantilever arm shelf trolleys. For collecting dripping liquids. Made of zinc plated steel, robust and durable. Easy installation and fast attachment. Keeps the floor clean and dry. Minimises the risk of accidents due to dripping liquids. The eurokraft pro drip tray is a practical accessory that has been developed for use with the eurokraft pro cantilever arm shelf trolley. This tray is used to catch and collect dripping liquids such as water, oil and paint and thereby keep the floor clean. Loose, small objects that fall off components, for example, are also collected in the tray. Made of zinc plated steel, the drip tray is robust, durable and resistant to liquids. Easy installation allows it to be attached to your existing eurokraft pro cantilever arm shelf trolley quickly. The drip tray ensures that your work environment remains dry and clean, while minimising the risk of accidents caused by spilled liquids. Ideal for workshops, warehouses and industrial use.

GBP 599.99
1

KAISER + KRAFT GMBH Assembly Kit for Space Pallet Racking Max. Shelf Load 700 kg Support Height 115mm

KAISER + KRAFT GMBH Assembly Kit for Space Pallet Racking Max. Shelf Load 700 kg Support Height 115mm

Assembly kit for Space pallet racking, max. shelf load 700 kg, support height 115 mm. Supplied = flat pack. Material = steel. Height = 115 mm. Width = 850 mm. Depth = 1100 mm. Max. load = 700 kg. Colour = zinc plated. Product type = accessories for pallet racking. Mounting bracket for drawer fitting. Optimisation of the time needed for order picking by increasing the number of picking stations.

GBP 29.99
1

KAISER + KRAFT GMBH Assembly Kit for Space Pallet Racking Max. Shelf Load 700 kg Support Height 140mm

KAISER + KRAFT GMBH Assembly Kit for Space Pallet Racking Max. Shelf Load 700 kg Support Height 140mm

Assembly kit for Space pallet racking, max. shelf load 700 kg, support height 140 mm. Supplied = flat pack. Material = steel. Height = 140 mm. Width = 850 mm. Depth = 1100 mm. Max. load = 700 kg. Colour = zinc plated. Product type = accessories for pallet racking. Mounting bracket for drawer fitting. Optimisation of the time needed for order picking by increasing the number of picking stations.

GBP 33.99
1

KAISER + KRAFT GMBH Assembly Kit for Space Pallet Racking Max. Shelf Load 700 kg Support Height 100mm

KAISER + KRAFT GMBH Assembly Kit for Space Pallet Racking Max. Shelf Load 700 kg Support Height 100mm

Assembly kit for Space pallet racking, max. shelf load 700 kg, support height 100 mm. Supplied = flat pack. Material = steel. Height = 100 mm. Width = 850 mm. Depth = 1100 mm. Max. load = 700 kg. Colour = zinc plated. Product type = accessories for pallet racking. Mounting bracket for drawer fitting. Optimisation of the time needed for order picking by increasing the number of picking stations.

GBP 29.99
1

KAISER + KRAFT GMBH Insert Board for Space Pallet Racking Drawer WxD 850 x 1100mm Max. Shelf Load 700 kg

KAISER + KRAFT GMBH Insert Board for Space Pallet Racking Drawer WxD 850 x 1100mm Max. Shelf Load 700 kg

Insert board for Space pallet racking drawer, WxD 850 x 1100 mm, max. shelf load 700 kg. Supplied = flat pack. Width = 850 mm. Depth = 1100 mm. Material = steel. Colour = zinc plated. Max. load = 700 kg. Product type = accessories for pallet racking. Insert board for drawer fitting. Insert board for drawer fitting for handling without a pallet. By using an insert board, you can handle and move goods for order picking without a pallet.

GBP 149.99
1

KAISER + KRAFT GMBH Dividers Steel Zinc Plated Pack of 2 Width 700mm

KAISER + KRAFT GMBH Dividers Steel Zinc Plated Pack of 2 Width 700mm

Dividers, steel, zinc plated, pack of 2, width 700 mm. Supplied = pre-assembled, final assembly by customer. Material = steel. Finish = zinc plated by galvanization. Height = 300 mm. Length = 30 mm. Width = 700 mm. For pallet size = 1050x700 mm. Colour = zinc plated. Type of mounting = wing screw clamp. Product type = accessories. Accessories for assembly trolley, shelf and cardboard box trolleys. Flexibly adjustable dividers on a shelf. Easy installation using wing screws. Clamping range covers a panel thickness of up to 40 mm. Pack of 2. Width 700 mm for CustomLine assembly trolleys and shelf trucks. The dividers for flexible adjustment can be attached to the shelves on transport equipment such as assembly trolleys, shelf trucks or cardboard box trolleys. Assembly is straightforward and is performed by clamping using wing screws. The dividers make it easy to organise goods or cardboard boxes according to number, size and intended use. The spacing between the brackets can be individually adjusted and adapted to suit requirements. The dividers are available in widths of 700 mm and 800 mm and are suitable for trolleys with the corresponding widths. The 700 mm wide dividers are suitable as accessories for CustomLine assembly trolleys and shelf trucks.

GBP 159.99
1

KAISER + KRAFT GMBH Dividers Steel Zinc Plated Pack of 2 Width 800mm

KAISER + KRAFT GMBH Dividers Steel Zinc Plated Pack of 2 Width 800mm

Dividers, steel, zinc plated, pack of 2, width 800 mm. Supplied = pre-assembled, final assembly by customer. Material = steel. Finish = zinc plated by galvanization. Height = 300 mm. Length = 30 mm. Width = 800 mm. For pallet size = 1250x800 mm. Colour = zinc plated. Type of mounting = wing screw clamp. Product type = accessories. Accessories for assembly trolley, shelf and cardboard box trolleys. Flexibly adjustable dividers on a shelf. Easy installation using wing screws. Clamping range covers a panel thickness of up to 40 mm. Pack of 2. Width 700 mm for CustomLine assembly trolleys and shelf trucks. The dividers for flexible adjustment can be attached to the shelves on transport equipment such as assembly trolleys, shelf trucks or cardboard box trolleys. Assembly is straightforward and is performed by clamping using wing screws. The dividers make it easy to organise goods or cardboard boxes according to number, size and intended use. The spacing between the brackets can be individually adjusted and adapted to suit requirements. The dividers are available in widths of 700 mm and 800 mm and are suitable for trolleys with the corresponding widths. The 700 mm wide dividers are suitable as accessories for CustomLine assembly trolleys and shelf trucks.

GBP 163.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 4500 x 1100mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 4500 x 1100mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 4500 x 1100 mm, max. load 9000 kg. Supplied = flat pack. Height = 4500 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 299.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 2000 x 800mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 2000 x 800mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 2000 x 800 mm, max. load 9000 kg Supplied = flat pack. Height = 2000 mm. Width = 90 mm. Depth = 800 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 169.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 3000 x 1100mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 3000 x 1100mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 3000 x 1100 mm, max. load 9000 kg. Supplied = flat pack. Height = 3000 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 219.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 5000 x 1100mm Max. Load 12000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 5000 x 1100mm Max. Load 12000 kg

Upright frame for Space pallet racking, zinc plated, HxD 5000 x 1100 mm, max. load 12000 kg. Supplied = flat pack. Height = 5000 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 12000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 339.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 2000 x 1100mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 2000 x 1100mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 2000 x 1100 mm, max. load 9000 kg. Supplied = flat pack. Height = 2000 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 179.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 1500 x 1100mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 1500 x 1100mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 1500 x 1100 mm, max. load 9000 kg. Supplied = flat pack. Height = 1500 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 149.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 3500 x 1100mm Max. Load 12000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 3500 x 1100mm Max. Load 12000 kg

Upright frame for Space pallet racking, zinc plated, HxD 3500 x 1100 mm, max. load 12000 kg. Supplied = flat pack. Height = 3500 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 12000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 279.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 4000 x 800mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 4000 x 800mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 4000 x 800 mm, max. load 9000 kg Supplied = flat pack. Height = 4000 mm. Width = 90 mm. Depth = 800 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 259.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 6500 x 1100mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 6500 x 1100mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 6500 x 1100 mm, max. load 9000 kg. Supplied = flat pack. Height = 6500 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 419.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 5000 x 1100mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 5000 x 1100mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 5000 x 1100 mm, max. load 9000 kg. Supplied = flat pack. Height = 5000 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 319.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 3500 x 800mm Max. Load 9000 kg - 789156

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 3500 x 800mm Max. Load 9000 kg - 789156

Upright frame for Space pallet racking, zinc plated, HxD 3500 x 800 mm, max. load 9000 kg. Supplied = flat pack. Height = 4000 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 279.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 2500 x 1100mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 2500 x 1100mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 2500 x 1100 mm, max. load 9000 kg. Supplied = flat pack. Height = 2500 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 199.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 2500 x 800mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 2500 x 800mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 2500 x 800 mm, max. load 9000 kg Supplied = flat pack. Height = 2500 mm. Width = 90 mm. Depth = 800 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 199.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 5000 x 800mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 5000 x 800mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 5000 x 800 mm, max. load 9000 kg Supplied = flat pack. Height = 5000 mm. Width = 90 mm. Depth = 800 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 319.99
1