18 results (0,13885 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Single Composite Stand SCS

Single Composite Stand SCS

Single Composite Stand SCSThe single composite stand is a rigid plastic stand which is made from 2-part vacuum high impact plastics and is available in a single and double capacity. It is ideal for indoor use in most workplaces.Single extinguisher composite stand in a non-GRP construction. It is Ideal for holding one fire extinguisher of up to 12 kg in size or any sized portable extinguisher.It features a skirting board cut out to enable the stand to be put against a wall and eliminating the chance of first collecting behind the stand. It is well suited for use in food preparation areas and kitchens.Key FeaturesEasy to cleanAvailable in Red or Grey colourFully recyclable materials usedHas grooves for holding all sizes of extinguisher from 2Kg to 9KgHeight 760mmWidth 294mmDepth 267mm

GBP 29.22
1

Double Rotationally Moulded Stand DRMS

Double Rotationally Moulded Stand DRMS

Double Rotationally Moulded Stand DRMSThe double rotationally moulded stand is designed for use with fire extinguishers. It is available in a single and double capacity. It is ideal for offices shops and workplaces where customers do not have space or want to hang the extinguishers and signs on the wall.Our rotationally moulded fire extinguisher stand is a robust hard wearing stand that can be placed anywhere within a building.Key FeaturesMade from high quality polymer plasticAvailable in Red and Grey coloursCan hold most fire extinguisher types and ID signs to suitHeight 708mmWidth 600mmDepth 300mmWeight 4.5Kg

GBP 43.48
1

Double Composite Stand DCS

Double Composite Stand DCS

Double Composite Stand DCSThis is a double composite stand which comes in a rigid plastic which is made from 2-part vacuum formed high impact plastics and is available in single and double capacity. It is ideal for indoor use in most workplaces.Particularly useful in environments where hanging extinguishers pose a danger to smaller children this highly visible fire extinguisher stand enables extinguishers to be positioned at ground level to avoid possible falling hazard.Manufactured in high-impact resistant plastic this rotationally-moulded stand is made from chemical resistant plastic.Suitable for use in schools nurseries food preparation and clean room areasKey FeaturesEasy to cleanAvailable in Red or Grey colourFully recyclable materials usedHas grooves for holding all sizes of extinguisher from 2Kg to 9KgHeight 760mmWidth 595mmDepth 267mm

GBP 39.31
1

Single Rotationally Moulded Stand SRMS

Single Rotationally Moulded Stand SRMS

Single Rotationally Moulded Stand SRMSThe singlerotationally moulded stand is a robust and hard wearing stand that is available in single and double capacities. It is ideal for offices shops and workplaces where customers do not have space or want to hang the extinguishers and signs on the wall.The slimline rotationally moulded single fire extinguisher stand is made from rotationally moulded plastic these stands are a two piece design for improved transportation and are extremely hard wearing.Ideal for all types of environment these extinguisher stands have a stylish slim and smooth finish.Key FeaturesMade from high quality polymer plasticAvailable in Red and Grey coloursCan hold most fire extinguisher types and ID signs to suitHeight 708mmWidth 295mmDepth 300mmWeight 2Kg

GBP 33.32
1

Double Fibreglass Stand DGRPS

Double Fibreglass Stand DGRPS

Double Fibreglass Stand DGRPS The double fibreglass stands are available in single and double capacities. It is ideal for the more cost-conscious customers for construction sites and outside workplaces where the elements can be much harsher than internal environments.These stands will hold any hand held extinguisher size available and feature an angled section at the top of the stand to accommodate any landscape ID signs.Key FeaturesEasy to cleanAvailable in RedCan hold one or two extinguishers and id signs to suitHeight 708mmWidth 600mmDepth 300mmWeight 2Kg

GBP 36.29
1

Double Tubular Chrome Stand DCHS

Double Tubular Chrome Stand DCHS

Double Tubular Chrome Stand DCHSThis double tubular stand has a beautiful silver finish that makes it a great contemporary and discreet solution to fire extinguisher mounting. Its hand-finished exterior makes it ideal for modern environments and its strong but lightweight body ensures it is highly durable and easy to position.A fire extinguisher might be a vital piece of equipment and mandatory for public settings but we understand that where aesthetics are also important minimalism is key.Metal stands are a great modern and discreet solution to fire extinguisher mounting yet still provide an obvious fire point for if and when its required.This robust tubular stand houses two extinguishers and is ideal for contemporary settings where interior design matters thanks to its stunning chrome finish.Key FeaturesEasy to cleanAvailable in Red or Chrome finishCan hold one or two extinguishersSign clips with adhesive pads for ID signs sold separatelyHeight 710mmWidth 510mmDepth 300mmWeight 3kg

GBP 52.42
1

Single Tubular Chrome Stand SCHS

Single Tubular Chrome Stand SCHS

Single Tubular Chrome Stand SCHSThis single stand has a stunning chrome finish that when paired with a matching chrome extinguisher is the epitome of luxury. Blending in perfectly with the most prestigious of settings this unit is a key component to a striking look for your fire safety equipment.A fire extinguisher might be a vital piece of equipment and mandatory for public settings but we understand that where aesthetics are also important minimalism is key.Metal stands are a great modern and discreet solution to fire extinguisher mounting yet still provide an obvious fire point for if and when its required.This robust tubular stand houses a single extinguisher and its chrome finish makes it the epitome of luxury. Pair it with a chrome extinguisher from the Contempo range and youre left with striking-looking fire safety equipment that fits in with the most prestigious of settings.Key FeaturesEasy to cleanAvailable in Red or Chrome finishCan hold one or two extinguishersSign clips with adhesive pads for ID signs sold separatelyHeight 710mmWidth 320mmDepth 300mmWeight 1.2Kg

GBP 36.29
1

Contractor Stand - CS

Contractor Stand - CS

Contractor Stand - CSThe contractor stand is a super strength steel backboard fire point stand which is used primarily on construction sites or petrol forecourts.The Contractor Fire Point Stand is very robust and ideal for moving the fire point across site.Powder Extinguishers are especially suited to mixed fire risk environments and a good all-round extinguisher. They are also suitable for risks such as methane propane hydrogen natural gas etc.Foam Extinguishers are ideally suited where both class A B fire risks exist. Aqueous Film Forming Foam or AFFF is particularly suited to fight liquid spill fires such as petrol oil fats paints etc. and works by forming a film on the liquid to extinguish the fire. This extinguisher has also passed the electrical conductivity test at 35kv.CO2 Extinguishers suitable for Class B risks involving flammable liquids and electrical hazards. These extinguishers have been a natural replacement for Halon. CO2 is harmless to electrical equipment and is ideal for modern offices electronic risks and fires caused by the combustion of liquids such as oils fats solvents etc. This unit has the highest fire rating in its class.Identification Signs a rigid plastic ID sign showing the relevant person exactly what type of fire the extinguisher can and cannot be used on.First Aid Kits are essential in any work place regardless of the size of premises. Contains everything you are likely to need to administer first aid at work along with a fixing bracket to fix the first aid kit.Fire Action Notice the fire action notice is to show the relevant person what to do if they discover a fire or hear a fire alarm.The Evacuator Sitemaster Push Button Fire Alarm designed for emergency situations extremely versatile reliable and easy to use. Simply push the button to activate. For use in temporary buildings premises under construction and camp sites. The Evacuator Sitemaster can either be used as a standalone alarm for small sites or can be linked up to 20 other units for larger sites.Key FeaturesSupplied with wheels as standardCapable of holding 3 fire extinguishersSteel backboard with epoxy finish making it resilient to harsh weather conditionsSigns and alarms can be attached to standHeight 1800mmWidth 730mmDepth 430mm

GBP 115.31
1

Double Red Tubular Stand DRS

Double Red Tubular Stand DRS

Double Red Tubular Stand DRSThe double red tubular stand is made from elegantly crafted tubular steel and is available in single and double capacities. It is ideal for those customers that require a prestige fire point to blend in with more modern surroundings.Our Double fire extinguisher stands are easy to move and re-adjust with no installation required these units are completely free-standing.Easy to move because of the stands light weight.No hassle in regards to fitting or removingStylish and Modern with a gleaming red finish great for business environments.Complies with the current fire extinguisher mounting requirementStrong quality steelComes with an adhesive pad that allows you to stick your Fire Extinguisher I.D sign to the stand.Stores two extinguishersThe Double Red Tubular Extinguisher Stands are very versatile and designed to accommodate two of the many modern extinguishers including9 Ltr Water6 Ltr Water9 Ltr Foam6 Ltr Foam9 Kg Powder6 Kg Powder5 Kg Co22 Kg Co2Key FeaturesEasy to cleanAvailable in Red or Chrome finishCan hold one or two extinguishersSign clips with adhesive pads for ID signs sold separatelyHeight 710mmWidth 510mmDepth 300mmWeight 3kgPlease NoteThese stands are not supplied with extinguisher brackets.

GBP 48.22
1

Single Red Tubular Stand SRS

Single Red Tubular Stand SRS

Single Red Tubular Stand SRSThis is a single Our elegantly crafted tubular steel stands are available in single and double capacities. Ideal for those customers that require a prestige fire point to blend in with more modern surroundings.These extinguisher stands are designed to be Modern and Stylish manufactured high quality steel with a red finish.Our single fire extinguisher stands are easy to move and re-adjust with no installation required these units are completely free-standing.Easy to move because of the stands light weight.No hassle in regards to fitting or removingStylish and Modern with a gleaming red finish great for business environments.Complies with the current fire extinguisher mounting requirementStrong quality steelComes with an adhesive pad that allows you to stick your Fire Extinguisher I.D sign to the stand.The Single Red Tubular Extinguisher Stands are very versatile and designed to accommodate many of todays modern extinguishers including9 Ltr Water6 Ltr Water9 Ltr Foam6 Ltr Foam9 Kg Powder6 Kg Powder5 Kg Co22 Kg Co2Key FeaturesEasy to cleanAvailable in Red or Chrome finishCan hold one or two extinguishersSign clips with adhesive pads for ID signs sold separatelyHeight 710mmWidth 320mmDepth 300mmWeight 1.2Kg

GBP 37.73
1