mcb.dk | Få success online

JESSBERGER Multi-Purpose Chemical Hose with Hose Connections, Made of Crosslinked Pe, per Metre, 1''

Multi-purpose chemical hose with hose connections, made of crosslinked PE, per metre, 1''. Supplied = assembled. For media = chemicals, solvents, petrol and oil. Pressure = 16 bar. Temperature resistance = -40 C to +90 C. External diameter = 37 mm. Internal diameter = 25 mm. External connection = 1 inch. Material = polyethylene. Product type = hoses. Suction and pressure hose for chemical products and solvents, compliant with EN 12115 regulations. Electrically conductive core made of black UPE, electrically conductive sheath made of EPDM, R < 10 . Temperature resistant to 90 C. Multi-purpose chemical hose 2 m, conductive 1'', with stainless steel hose connectors and aluminium hose clamps. Pump unit side: internal thread 1 1/4'' Tap side: internal thread 1'' Inside wall homogeneous, smooth, PE-X (crosslinked PE) Outside wall made of EPDM. Resistant to almost all chemicals, solvents, oils and petrol. Not resistant to oleum, bromine and chlorosulfuric acid. Max. operating pressure 16 bar. Max. temperature range -40 C to +90 C. Roll length max. 50 m, custom lengths available on request. Products cut to order may exhibit dimensional tolerances of up to 5% depending on the material.

GBP 499.99

1

5x JESSBERGER Canister/drum Hand Pump, For Mineral Oil Products, Blue, 0.3 - 0.45 L/stroke

Canister/drum hand pump, for mineral oil products, blue, 0.3 - 0.45 l/stroke, 5+ items. Supplied = pre-assembled, final assembly by customer. Design of pump = hand pump with telescopic immersion tube. For media = oils, diesel, water, alcohol, anti-freeze. Material of pump = polypropylene (PP) Drive shaft material = steel. Immersion tube diameter = 40 mm. Pump rate = 0, 3 - 0, 45 l/stroke. Immersion tube length = 340 - 900 mm. Thread = G 2/1 1/2 inch. Weight = 0.84 kg. Product type = hand pumps. For oils, diesel, alcohol, antifreeze, water etc. Easy and safe metering. Suitable for canisters and 200 litre drums. No power or compressed air connection required. Delivery rate 0.3, 0.37 or 0.45 l/stroke depending on how the pump lever is installed. Immersion tube length 340 - 900 mm. Immersion tube diameter max. 40 mm. Including thread adapter G 2'' and 1 1/2''. Pump material PP Shaft tool steel Seals NBR Hand pump for oils, diesel, alcohol up to max. 50%, antifreeze (diluted) , water etc. Not suitable for flammable media. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 564.95

1

5x JESSBERGER Canister/drum Crank Pump, Rapid Pumping of Mineral Oils, Discharge Hose

Canister/drum crank pump, rapid pumping of mineral oils, discharge hose, 5+ items. Supplied = pre-assembled, final assembly by customer. Design of pump = rotary piston pump. For media = mineral oils, gear oil, hydraulic oil, diesel, heating oil. Material of pump = aluminium, steel. Immersion tube diameter = 53 mm. Pump rate = 1 l/stroke. Immersion tube length = 1080 mm. Suction hose length = 1350 mm. Thread = G 2 inch. Weight = 6.42 kg. Product type = hand pumps. With discharge hose 1350 mm. For non-flammable mineral oil products such as diesel, gear oil, heating oil, hydraulic oil, machine oil, etc. Fast pumping - 1 l/revolution. Suitable for canisters and 200 litre drums. Hand or rotary crank pump for mineral oil products such as diesel, gear oil, heating oil, hydraulic oil, machine oil, mineral oil, motor oil etc. up to 1000 mPas Not suitable for flammable media and not suitable for water. Pump material aluminium and steel. Seals NBR. Delivery rate 1 l/revolution. Change from forward to reverse pumping possible. Water column 15 m. Horizontal distance 50 m. Immersion tube length 1080 mm, immersion tube diameter 53 mm (sieve) Pump with 1350 mm discharge hose and thread adapter G 2''. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 1999.95

1

3x JESSBERGER Canister/drum Crank Pump, Rapid Pumping of Mineral Oils, Discharge Hose

Canister/drum crank pump, rapid pumping of mineral oils, discharge hose, 3+ items. Supplied = pre-assembled, final assembly by customer. Design of pump = rotary piston pump. For media = mineral oils, gear oil, hydraulic oil, diesel, heating oil. Material of pump = aluminium, steel. Immersion tube diameter = 53 mm. Pump rate = 1 l/stroke. Immersion tube length = 1080 mm. Suction hose length = 1350 mm. Thread = G 2 inch. Weight = 6.42 kg. Product type = hand pumps. With discharge hose 1350 mm. For non-flammable mineral oil products such as diesel, gear oil, heating oil, hydraulic oil, machine oil, etc. Fast pumping - 1 l/revolution. Suitable for canisters and 200 litre drums. Hand or rotary crank pump for mineral oil products such as diesel, gear oil, heating oil, hydraulic oil, machine oil, mineral oil, motor oil etc. up to 1000 mPas Not suitable for flammable media and not suitable for water. Pump material aluminium and steel. Seals NBR. Delivery rate 1 l/revolution. Change from forward to reverse pumping possible. Water column 15 m. Horizontal distance 50 m. Immersion tube length 1080 mm, immersion tube diameter 53 mm (sieve) Pump with 1350 mm discharge hose and thread adapter G 2''. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 1289.97

1

JESSBERGER Canister/drum Crank Pump, Rapid Pumping Of Mineral Oils, Discharge Hose

Canister/drum crank pump, rapid pumping of mineral oils, discharge hose. Supplied = pre-assembled, final assembly by customer. Design of pump = rotary piston pump. For media = mineral oils, gear oil, hydraulic oil, diesel, heating oil. Material of pump = aluminium, steel. Immersion tube diameter = 53 mm. Pump rate = 1 l/stroke. Immersion tube length = 1080 mm. Suction hose length = 1350 mm. Thread = G 2 inch. Weight = 6.42 kg. Product type = hand pumps. With discharge hose 1350 mm. For non-flammable mineral oil products such as diesel, gear oil, heating oil, hydraulic oil, machine oil, etc. Fast pumping - 1 l/revolution. Suitable for canisters and 200 litre drums. Hand or rotary crank pump for mineral oil products such as diesel, gear oil, heating oil, hydraulic oil, machine oil, mineral oil, motor oil etc. up to 1000 mPas Not suitable for flammable media and not suitable for water. Pump material aluminium and steel. Seals NBR. Delivery rate 1 l/revolution. Change from forward to reverse pumping possible. Water column 15 m. Horizontal distance 50 m. Immersion tube length 1080 mm, immersion tube diameter 53 mm (sieve) Pump with 1350 mm discharge hose and thread adapter G 2''. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 459.99

1

JESSBERGER Canister/drum Crank Pump, Fast Pumping Of Mineral Oils, Hose, Manifold

Canister/drum crank pump, fast pumping of mineral oils, hose, manifold. Supplied = pre-assembled, final assembly by customer. Design of pump = rotary piston pump. For media = mineral oils, gear oil, hydraulic oil, diesel, heating oil. Material of pump = aluminium, steel. Immersion tube diameter = 53 mm. Pump rate = 1 l/stroke. Immersion tube length = 1080 mm. Suction hose length = 2000 mm. Thread = G 2 inch. Weight = 6.78 kg. Product type = hand pumps. With special mineral oil hose 2000 mm and outlet manifold. For non-flammable mineral oil products such as diesel, gear oil, heating oil, hydraulic oil, machine oil, etc. Fast pumping - 1 l/revolution. Suitable for canisters and 200 litre drums. Hand or rotary crank pump for mineral oil products such as diesel, gear oil, heating oil, hydraulic oil, machine oil, mineral oil, motor oil etc. up to 1000 mPas Not suitable for flammable media and not suitable for water. Pump material aluminium and steel. Seals NBR. Delivery rate 1 l/revolution. Change from forward to reverse pumping possible. Water column 15 m. Horizontal distance 50 m. Immersion tube length 1080 mm, immersion tube diameter 53 mm (sieve) Pump with 2000 mm special mineral oil hose and outlet manifold. Thread adapter G 2''. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 599.99

1

5x JESSBERGER Canister/drum Crank Pump, Fast Pumping of Mineral Oils, Hose, Manifold

Canister/drum crank pump, fast pumping of mineral oils, hose, manifold, 5+ items. Supplied = pre-assembled, final assembly by customer. Design of pump = rotary piston pump. For media = mineral oils, gear oil, hydraulic oil, diesel, heating oil. Material of pump = aluminium, steel. Immersion tube diameter = 53 mm. Pump rate = 1 l/stroke. Immersion tube length = 1080 mm. Suction hose length = 2000 mm. Thread = G 2 inch. Weight = 6.78 kg. Product type = hand pumps. With special mineral oil hose 2000 mm and outlet manifold. For non-flammable mineral oil products such as diesel, gear oil, heating oil, hydraulic oil, machine oil, etc. Fast pumping - 1 l/revolution. Suitable for canisters and 200 litre drums. Hand or rotary crank pump for mineral oil products such as diesel, gear oil, heating oil, hydraulic oil, machine oil, mineral oil, motor oil etc. up to 1000 mPas Not suitable for flammable media and not suitable for water. Pump material aluminium and steel. Seals NBR. Delivery rate 1 l/revolution. Change from forward to reverse pumping possible. Water column 15 m. Horizontal distance 50 m. Immersion tube length 1080 mm, immersion tube diameter 53 mm (sieve) Pump with 2000 mm special mineral oil hose and outlet manifold. Thread adapter G 2''. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 2649.95

1

2x JESSBERGER Canister/drum Crank Pump, Fast Pumping of Mineral Oils, Hose, Manifold

Canister/drum crank pump, fast pumping of mineral oils, hose, manifold, 2+ items. Supplied = pre-assembled, final assembly by customer. Design of pump = rotary piston pump. For media = mineral oils, gear oil, hydraulic oil, diesel, heating oil. Material of pump = aluminium, steel. Immersion tube diameter = 53 mm. Pump rate = 1 l/stroke. Immersion tube length = 1080 mm. Suction hose length = 2000 mm. Thread = G 2 inch. Weight = 6.78 kg. Product type = hand pumps. With special mineral oil hose 2000 mm and outlet manifold. For non-flammable mineral oil products such as diesel, gear oil, heating oil, hydraulic oil, machine oil, etc. Fast pumping - 1 l/revolution. Suitable for canisters and 200 litre drums. Hand or rotary crank pump for mineral oil products such as diesel, gear oil, heating oil, hydraulic oil, machine oil, mineral oil, motor oil etc. up to 1000 mPas Not suitable for flammable media and not suitable for water. Pump material aluminium and steel. Seals NBR. Delivery rate 1 l/revolution. Change from forward to reverse pumping possible. Water column 15 m. Horizontal distance 50 m. Immersion tube length 1080 mm, immersion tube diameter 53 mm (sieve) Pump with 2000 mm special mineral oil hose and outlet manifold. Thread adapter G 2''. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 1099.98

1

2x JESSBERGER Electric Canister Pump Set, For Highly Aggressive Media, PVDF, 30 - 40 L/min

Electric canister pump set, for highly aggressive media, PVDF, 30 - 40 l/min, 2+ items. Supplied = pre-assembled, final assembly by customer. Design of pump = canister pump set. For media = chromic acid, hydrofluoric acid, sodium hypochlorite, nitric acid. Type of connection = AG 1''. Material of pump = polyvinylidene fluoride (PVDF) Drive shaft material = Hastelloy. Immersion depth = 700 mm. Immersion tube diameter = 32 mm. Pump rate = 30 - 40 l/min. Pumping height = 10 m wc. Tube diameter = 32 mm. Immersion tube length = 700 mm. Nominal hose diameter = 3/4 ''. Thread = AG 1 inch. Max. viscosity at +20 C = 400 mPas. Feature = max. density 1.3. Scope of delivery = pump, 2 m crosslinked polyethylene hose 3/4'', 2 stainless steel hose clamps, 1 polypropylene tap/nozzle. Voltage = 230 V. Power = 450 kW. Weight = 4.83 kg. Product type = canister pumps, electric. Safe and fast refilling and filling of chemicals. Suitable for 30 and 60 litre canisters. Electric canister pump set made of PVDF for 30 and 60 litre canisters. For highly aggressive media such as chromic acid, hydrofluoric acid, sodium hypochlorite, nitric acid. Pump rate 30 - 40 l/min. Universal electric motor, 230 V, 50/60 Hz, 250 W, protection class IP24, double insulation for protection class II, overcurrent circuit breaker with integrated zero voltage trip, thermal protection, 5 m cable with safety plug. PVDF pump unit, external 32 mm, immersion tube length 700 mm, HC shaft, connection thread G 1'', hose connection 3/4''. 2 m crosslinked polyethylene hose 3/4''. 2 stainless steel hose clamps. 1 PVDF/nozzle with seals made of FKM 3/4''. Please note: if media compatibility is unclear, please enquire about the suitability beforehand.

GBP 4999.98

1

JESSBERGER Electric Canister Pump Set, For Highly Aggressive Media, PVDF, 30 - 40 L/min

Electric canister pump set, for highly aggressive media, PVDF, 30 - 40 l/min. Supplied = pre-assembled, final assembly by customer. Design of pump = canister pump set. For media = chromic acid, hydrofluoric acid, sodium hypochlorite, nitric acid. Type of connection = AG 1''. Material of pump = polyvinylidene fluoride (PVDF) Drive shaft material = Hastelloy. Immersion depth = 700 mm. Immersion tube diameter = 32 mm. Pump rate = 30 - 40 l/min. Pumping height = 10 m wc. Tube diameter = 32 mm. Immersion tube length = 700 mm. Nominal hose diameter = 3/4 ''. Thread = AG 1 inch. Max. viscosity at +20 C = 400 mPas. Feature = max. density 1.3. Scope of delivery = pump, 2 m crosslinked polyethylene hose 3/4'', 2 stainless steel hose clamps, 1 polypropylene tap/nozzle. Voltage = 230 V. Power = 450 kW. Weight = 4.83 kg. Product type = canister pumps, electric. Safe and fast refilling and filling of chemicals. Suitable for 30 and 60 litre canisters. Electric canister pump set made of PVDF for 30 and 60 litre canisters. For highly aggressive media such as chromic acid, hydrofluoric acid, sodium hypochlorite, nitric acid. Pump rate 30 - 40 l/min. Universal electric motor, 230 V, 50/60 Hz, 250 W, protection class IP24, double insulation for protection class II, overcurrent circuit breaker with integrated zero voltage trip, thermal protection, 5 m cable with safety plug. PVDF pump unit, external 32 mm, immersion tube length 700 mm, HC shaft, connection thread G 1'', hose connection 3/4''. 2 m crosslinked polyethylene hose 3/4''. 2 stainless steel hose clamps. 1 PVDF/nozzle with seals made of FKM 3/4''. Please note: if media compatibility is unclear, please enquire about the suitability beforehand.

GBP 2599.99

1

JESSBERGER Electric Canister Pump Set - For Neutral And Slightly Aggressive Media - 30 - 40 L/Min

Electric canister pump set, for neutral and slightly aggressive media, stainless steel, 30 - 40 l/min. Supplied = pre-assembled, final assembly by customer. Design of pump = canister pump set. For media = suitable for all neutral, slightly aggressive and non-flammable media. Type of connection = AG 1''. Material of pump = stainless steel. Drive shaft material = stainless steel. Immersion depth = 700 mm. Immersion tube diameter = 32 mm. Pump rate = 30 - 40 l/min. Pumping height = 10 m wc. Tube diameter = 32 mm. Immersion tube length = 700 mm. Nominal hose diameter = 3/4 ''. Thread = AG 1 inch. Max. viscosity at +20 C = 400 mPas. Feature = max. density 1.3. Scope of delivery = pump, 2 m PVC hose 3/4'', 2 stainless steel hose clamps, 1 polypropylene tap/nozzle. Voltage = 230 V. Power = 450 kW. Weight = 5.44 kg. Product type = canister pumps, electric. Safe and fast refilling and filling of chemicals. Suitable for 30 and 60 litre canisters. Electric canister pump set made of stainless steel for 30 and 60 litre canisters. Suitable for all neutral, slightly aggressive and non-flammable media. Pump rate 30 - 40 l/min. Universal electric motor, 230 V, 50/60 Hz, 250 W, protection class IP24, double insulation for protection class II, overcurrent circuit breaker with integrated zero voltage trip, thermal protection, 5 m cable with safety plug. Stainless steel pump unit, external 32 mm, immersion tube length 700 mm, stainless steel shaft, connection thread G 1'', hose connection 3/4''. 2 m hose made of PVC 3/4''. 2 stainless steel hose clamps. 1 polypropylene tap/nozzle with seals made of FKM 3/4''. Please note: if media compatibility is unclear, please enquire about the suitability beforehand.

GBP 2299.99

1

JESSBERGER Electric Drum Pump Set, For Neutral And Aggressive Media, PP, 30 - 40 L/min

Electric drum pump set, for neutral and aggressive media, PP, 30 - 40 l/min. Supplied = pre-assembled, final assembly by customer. Design of pump = drum pump set. For media = battery acid, ammonia, iron II and III chloride, photo developer, glycol, phosphoric acid, hydrochloric acid, hydrogen peroxide. For liquids = corrosive media. Type of connection = AG 1''. Material of pump = polypropylene (PP) Drive shaft material = Hastelloy. Immersion depth = 1000 mm. Immersion tube diameter = 32 mm. Pump rate = 30 - 40 l/min. Pumping height = 10 m wc. Tube diameter = 32 mm. Immersion tube length = 1000 mm. Nominal hose diameter = 3/4 ''. Thread = AG 1 inch. Max. viscosity at +20 C = 400 mPas. Feature = max. density 1.3. Scope of delivery = pump, 2 m PVC hose 3/4'', 2 stainless steel hose clamps, 1 polypropylene tap/nozzle. Voltage = 230 V. Power = 450 kW. Weight = 4.04 kg. Product type = drum pumps, electric. Very good chemical resistance due to the material polypropylene, and a shaft made of Hastelloy. Safe and fast refilling and filling of chemicals. Suitable for 200 litre drums. Electric drum pump set made of polypropylene (PP) for 200 litre drums. For neutral and aggressive media such as battery acid, ammonia, iron II and III chloride, photo developer, glycol, phosphoric acid, hydrochloric acid, hydrogen peroxide. Pump rate 30 - 40 litres/min. Universal electric motor, 230 V, 50/60 Hz, 250 W, protection class IP24, double insulation for protection class II, overcurrent circuit breaker with integrated zero voltage trip, thermal protection, 5 m cable with safety plug. Polypropylene pump unit, external 32 mm, immersion tube length 1000 mm, HC shaft, connection thread G 1'', hose connection 3/4''. 2 m hose made of PVC 3/4''. 2 stainless steel hose clamps. 1 polypropylene tap/nozzle with seals made of FKM 3/4''. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 1499.99

1

JESSBERGER Electric Tank Container Pump Set - For Neutral And Slightly Aggressive Media - 30 - 40 L/Min

Electric tank container pump set, for neutral and slightly aggressive media, stainless steel, 30 - 40 l/min. Supplied = pre-assembled, final assembly by customer. Design of pump = container pump set. For media = suitable for all neutral, slightly aggressive and non-flammable media. Type of connection = AG 1''. Material of pump = stainless steel. Drive shaft material = stainless steel. Immersion depth = 1200 mm. Immersion tube diameter = 32 mm. Pump rate = 30 - 40 l/min. Pumping height = 10 m wc. Tube diameter = 32 mm. Immersion tube length = 1200 mm. Nominal hose diameter = 3/4''. Thread = AG 1 inch. Max. viscosity at +20 C = 400 mPas. Feature = max. density 1.3. Scope of delivery = pump, 2 m PVC hose 3/4'', 2 stainless steel hose clamps, 1 polypropylene tap/nozzle. Voltage = 230 V. Power = 450 kW. Weight = 6.44 kg. Product type = tank container pumps, electric. High quality and robust due to the material stainless steel 1.4571. Safe and fast refilling and filling of chemicals. Suitable for IBC/CTC tank containers. Electric container pump set made of stainless steel for IBC/CTC tank containers. Suitable for all neutral, slightly aggressive and non-flammable media Pump rate 30 - 40 litres/min. Universal electric motor, 230 V, 50/60 Hz, 250 W, protection class IP24, double insulation for protection class II, overcurrent circuit breaker with integrated zero voltage trip, thermal protection, 5 m cable with safety plug. Stainless steel pump unit , external 32 mm, immersion tube length 1200 mm, stainless steel shaft, connection thread G 1'', hose connection 3/4''. 2 m hose made of PVC 3/4''. 2 stainless steel hose clamps. 1 polypropylene tap/nozzle with seals made of FKM 3/4''. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 2299.99

1

JESSBERGER Electric Drum Pump Set, For Alkaline Solutions, 112 L/min, 16 M Height

Electric drum pump set, for alkaline solutions, 112 l/min, 16 m height. Supplied = pre-assembled, final assembly by customer. Design of pump = electric container pump set for drums. For media = alkalis. Material of pump = polypropylene (PP) Drive shaft material = Hastelloy. Immersion depth = 1000 mm. Immersion tube diameter = 41 mm. Pump rate = 112 l/min. Pumping height = 16 m wc. Tube diameter = 41 mm. Immersion tube length = 1000 mm. Nominal hose diameter = 25. Thread = 1 1/4 inch. Max. viscosity at +20 C = 1000 mPas. Scope of delivery = pump, 2 m EPDM hose 1'' (NW 25) , 2 stainless steel hose clamps, 1 PP nozzle 1''. Voltage = 230 V. Power = 0.825 kW. Weight = 7.72 kg. Product type = drum pumps, electric. For alkaline solutions. Practical pump set for 200 litre drums - ready for immediate use. Safe, fast emptying of drums. Low pump weight - easy and pleasant to handle. Electric drum pump set for 200 litre drums - for alkaline solutions Max. 112 l/min, max. 16 m height, max. viscosity 1000 mPas, max. density 1.9 g/cm. Polypropylene pump unit with HC shaft , EPDM hose, polypropylene nozzle with EPDM seals. Drum pump motor 230 V, 50/60 Hz, 825 W, protection class IP24, double insulation for protection class II, overcurrent circuit breaker with zero voltage trip, 5 m cable with safety plug. Pump unit: PP, external 41 mm, immersion tube length 1000 mm for 200 litre drum, HC shaft, connection thread G 1 1/4'', hose connection 1'' (NW 25) 2 m hose made of EPDM 1'' (NW 25) 2 stainless steel hose clamps. 1 PP nozzle 1'' with EPDM seals. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 2499.99

1

JESSBERGER Electric Drum Pump Set, For Aggressive Acids And Slightly Alkaline Solutions, 93 L/min, 11 M Height

Electric drum pump set, for aggressive acids and slightly alkaline solutions, 93 l/min, 11 m height. Supplied = pre-assembled, final assembly by customer. Design of pump = electric container pump set for drums. For media = aggressive acids, slightly alkaline solutions. Material of pump = polypropylene (PP) Drive shaft material = Hastelloy. Immersion depth = 1000 mm. Immersion tube diameter = 41 mm. Pump rate = 93 l/min. Pumping height = 11 m wc. Tube diameter = 41 mm. Immersion tube length = 1000 mm. Nominal hose diameter = 25. Thread = 1 1/4 inch. Max. viscosity at +20 C = 600 mPas. Scope of delivery = pump, 2 m PVC hose 1'' (NW 25) , 2 stainless steel hose clamps, 1 polypropylene nozzle 1''. Voltage = 230 V. Power = 0.64 kW. Weight = 8.29 kg. Product type = drum pumps, electric. For aggressive acids and slightly alkaline solutions. Practical pump set for 200 litre drums - ready for immediate use. Safe, fast emptying of drums. Low pump weight - easy and pleasant to handle. Electric drum pump set for 200 litre drums - for aggressive acids and slightly alkaline solutions Max. 93 l/min, max. 11 m height, max. viscosity 600 mPas, max. density 1.5 g/cm. PP pump unit with HC shaft, PVC hose, PP nozzle with FKM seals. Drum pump motor 230 V, 50/60 Hz, 640 W, protection class IP55, double insulation for protection class II, overcurrent circuit breaker with zero voltage trip, 5 m cable with safety plug. Pump unit: Polypropylene, external 41 mm, immersion tube length 1000 mm for 200 litre drum, HC shaft, connection thread G 1 1/4'', hose connection 1'' (NW 25) 2 m hose made of PVC 1'' (NW 25) 2 stainless steel hose clamps. 1 polypropylene nozzle 1'' with FKM seals. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 2499.99

1

JESSBERGER Electric Drum Pump Set, For Highly Aggressive Media, PVDF, 30 - 40 L/min

Electric drum pump set, for highly aggressive media, PVDF, 30 - 40 l/min. Supplied = pre-assembled, final assembly by customer. Design of pump = drum pump set. For media = chromic acid, hydrofluoric acid, sodium hypochlorite, nitric acid. For liquids = highly aggressive media. Type of connection = AG 1''. Material of pump = polyvinylidene fluoride (PVDF) Drive shaft material = Hastelloy. Immersion depth = 1000 mm. Immersion tube diameter = 32 mm. Pump rate = 30 - 40 l/min. Pumping height = 10 m wc. Tube diameter = 32 mm. Immersion tube length = 1000 mm. Nominal hose diameter = 3/4 ''. Thread = AG 1 inch. Max. viscosity at +20 C = 400 mPas. Feature = max. density 1.3. Scope of delivery = pump, 2 m PVC hose 3/4'', 2 stainless steel hose clamps, 1 polypropylene tap/nozzle. Voltage = 230 V. Power = 450 kW. Weight = 5.06 kg. Product type = drum pumps, electric. Highest possible level of chemical resistance due to the material PVDF and a shaft made of Hastelloy. Safe and fast refilling and filling of chemicals. Suitable for 200 litre drums. Electric drum pump set made of PVDF for 200 litre drums. For highly aggressive media such as chromic acid, hydrofluoric acid, sodium hypochlorite, nitric acid. Pump rate 30 - 40 litres/min. Universal electric motor, 230 V, 50/60 Hz, 250 W, protection class IP24, double insulation for protection class II, overcurrent circuit breaker with integrated zero voltage trip, thermal protection, 5 m cable with safety plug. PVDF pump unit, external 32 mm, immersion tube length 1000 mm, HC shaft, connection thread G 1'', hose connection 3/4''. 2 m crosslinked polyethylene hose 3/4''. 2 stainless steel hose clamps. 1 PVDF tap/nozzle with seals made of FKM 3/4''. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 2699.99

1

2x JESSBERGER Electric Drum/Container Pump Set, For Alkaline Solutions, 112 L/min, 16 M Height

Electric drum/container pump set, for alkaline solutions, 112 l/min, 16 m height, 2+ items. Supplied = pre-assembled, final assembly by customer. Design of pump = electric container pump set for containers and drums. For media = alkalis. Material of pump = polypropylene (PP) Drive shaft material = Hastelloy. Immersion depth = 1200 mm. Immersion tube diameter = 41 mm. Pump rate = 112 l/min. Pumping height = 16 m wc. Tube diameter = 41 mm. Immersion tube length = 1200 mm. Nominal hose diameter = 25. Thread = 1 1/4 inch. Max. viscosity at +20 C = 1000 mPas. Scope of delivery = pump, 2 m EPDM hose 1'' (NW 25) , 2 stainless steel hose clamps, 1 PP nozzle 1''. Voltage = 230 V. Power = 0.825 kW. Weight = 8.03 kg. Product type = drum pumps, electric. Low pump weight - easy to handle. Safe, fast emptying of 1000 litre IBC/CTC containers and 200 litre drums. Practical pump set - ready for immediate use. Electric container pump set for IBC/CTC tank containers and 200 litre drums - for alkaline solutions Max. 112 l/min, max. 16 m height, max. viscosity 1000 mPas, max. density 1.9 g/cm. Polypropylene pump unit with HC shaft , EPDM hose, polypropylene nozzle with EPDM seals. Drum pump motor 230 V, 50/60 Hz, 825 W, protection class IP24, double insulation for protection class II, overcurrent circuit breaker with zero voltage trip, 5 m cable with safety plug. Pump unit: PP, external 41 mm, immersion tube length 1200 mm for IBC/CTC tank containers and 200 litre drums (pump then extends beyond the drum by approx. 200 mm) , HC shaft, connection thread G 1 1/4'', hose connection 1'' (NW 25) 2 m hose made of EPDM 1'' (NW 25) 2 stainless steel hose clamps. 1 PP nozzle 1'' with EPDM seals. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 4199.98

1

2x JESSBERGER Electric Drum Pump Set, For Mineral Oil Products < 1000 mPas, 112 L/min, 16 M Height

Electric drum pump set, for mineral oil products < 1000 mPas, 112 l/min, 16 m height, 2+ items. Supplied = pre-assembled, final assembly by customer. Design of pump = electric container pump set for drums. For media = mineral oil products under 1000 mPas. Material of pump = aluminium. Drive shaft material = stainless steel. Immersion depth = 1000 mm. Immersion tube diameter = 41 mm. Pump rate = 112 l/min. Pumping height = 16 m wc. Tube diameter = 41 mm. Immersion tube length = 1000 mm. Nominal hose diameter = 25. Thread = 1 1/4 inch. Max. viscosity at +20 C = 1000 mPas. Scope of delivery = pump, 2 m mineral oil hose 1'' (NW 25) , 2 stainless steel hose clamps, 1 aluminium nozzle 1''. Voltage = 230 V. Power = 0.825 kW. Weight = 7.72 kg. Product type = drum pumps, electric. For mineral oil products at less than 1000 mPas. Practical pump set for 200 litre drums - ready for immediate use. Safe, fast emptying of drums. Low pump weight - easy and pleasant to handle. Electric drum pump set for 200 litre drums - for mineral oil products at less than 1000 mPas Aluminium pump unit , NBR hose, aluminium nozzle with NBR seals. Drum pump motor 230 V, 50/60 Hz, 825 W, protection class IP24, double insulation for protection class II, overcurrent circuit breaker with zero voltage trip, 5 m cable with safety plug. Pump unit: Aluminium, external 41 mm, immersion tube length 1000 mm for 200 litre drum, stainless steel shaft, connection thread G 1 1/4'', hose connection 1'' (NW 25) 2 m mineral oil hose 1'' (NW 25) 2 stainless steel hose clamps. 1 aluminium nozzle 1'' with NBR seals. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 3799.98

1

2x JESSBERGER Electric Tank Container Pump Set, For Neutral and Aggressive Media, PP, 30 - 40 L/min

Electric tank container pump set, for neutral and aggressive media, PP, 30 - 40 l/min, 2+ items. Supplied = pre-assembled, final assembly by customer. Design of pump = container pump set. For media = battery acid, ammonia, iron II and III chloride, photo developer, glycol, phosphoric acid, hydrochloric acid, hydrogen peroxide. Material of pump = polypropylene (PP) Drive shaft material = Hastelloy. Immersion depth = 1200 mm. Immersion tube diameter = 32 mm. Pump rate = 30 - 40 l/min. Pumping height = 10 m wc. Tube diameter = 32 mm. Immersion tube length = 1200 mm. Nominal hose diameter = 3/4''. Thread = AG 1 inch. Max. viscosity at +20 C = 400 mPas. Feature = max. density 1.3. Scope of delivery = pump, 2 m PVC hose 3/4'', 2 stainless steel hose clamps, 1 polypropylene tap/nozzle. Voltage = 230 V. Power = 450 kW. Weight = 4.18 kg. Product type = tank container pumps, electric. Very good chemical resistance due to the material polypropylene, and a shaft made of Hastelloy. Safe and fast refilling and filling of chemicals. Suitable for IBC/CTC tank containers. Electric container pump set made of polypropylene (PP) for IBC/CTC tank containers. For neutral and aggressive media such as battery acid, ammonia, iron II and III chloride, photo developer, glycol, phosphoric acid, hydrochloric acid, hydrogen peroxide. Pump rate 30 - 40 litres/min. Universal electric motor, 230 V, 50/60 Hz, 250 W, protection class IP24, double insulation for protection class II, overcurrent circuit breaker with integrated zero voltage trip, thermal protection, 5 m cable with safety plug. Polypropylene pump unit , external 32 mm, immersion tube length 1200 mm, HC shaft, connection thread G 1'', hose connection 3/4''. 2 m hose made of PVC 3/4''. 2 stainless steel hose clamps. 1 polypropylene tap/nozzle with seals made of FKM 3/4''. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 3079.98

1

2x JESSBERGER Electric Drum Pump Set, For Highly Aggressive Chemicals, IP55, 112 L/min, 16 M Height

Electric drum pump set, for highly aggressive chemicals, IP55, 112 l/min, 16 m height, 2+ items. Supplied = pre-assembled, final assembly by customer. Design of pump = electric container pump set for drums. For media = highly aggressive media, highly aggressive acids. Material of pump = polyvinylidene fluoride (PVDF) Drive shaft material = Hastelloy. Immersion depth = 1000 mm. Immersion tube diameter = 41 mm. Pump rate = 112 l/min. Pumping height = 16 m wc. Tube diameter = 41 mm. Immersion tube length = 1000 mm. Nominal hose diameter = 25. Thread = 1 1/4 inch. Max. viscosity at +20 C = 1000 mPas. Feature = protection class IP55. Scope of delivery = pump, 2 m crosslinked PE hose 1'' (NW 25) , 2 stainless steel hose clamps, 1 PVDF nozzle 1''. Voltage = 230 V. Power = 0.825 kW. Weight = 10.09 kg. Product type = drum pumps, electric. For highly aggressive chemicals, acids, etc. - protection class IP55. Practical pump set for 200 litre drums - ready for immediate use. Safe, fast emptying of drums. Low pump weight - easy and pleasant to handle. Electric drum pump set for 200 litre drums - for highly aggressive chemicals, acids Max. 112 l/min, max. 16 m height, max. viscosity 1000 mPas, max. density 1.9 g/cm. PVDF pump unit , crosslinked polyethylene hose, PVDF nozzle with FKM seals. Drum pump motor 230 V, 50/60 Hz, 825 W, protection class IP55 , double insulation for protection class II, overcurrent circuit breaker with zero voltage trip, 5 m cable with safety plug. Pump unit: PVDF, external 41 mm, immersion tube length 1000 mm for 200 litre drum, HC shaft, connection thread G 1 1/4'', hose connection 1'' (NW 25) 2 m hose made of crosslinked PE 1'' (NW 25) 2 stainless steel hose clamps. 1 PVDF nozzle 1'' with FKM seals. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 7199.98

1

JESSBERGER Electric Drum Pump Set, For Acids And Slightly Alkaline Solutions, 93 L/min, 11 M Height

Electric drum pump set, for acids and slightly alkaline solutions, 93 l/min, 11 m height. Supplied = pre-assembled, final assembly by customer. Design of pump = electric container pump set for drums. For media = acids, slightly alkaline solutions. Material of pump = polypropylene (PP) Drive shaft material = Hastelloy. Immersion depth = 1000 mm. Immersion tube diameter = 41 mm. Pump rate = 93 l/min. Pumping height = 11 m wc. Tube diameter = 41 mm. Immersion tube length = 1000 mm. Nominal hose diameter = 25. Thread = 1 1/4 inch. Max. viscosity at +20 C = 600 mPas. Scope of delivery = pump, 2 m PVC hose 1'' (NW 25) , 2 stainless steel hose clamps, 1 polypropylene nozzle 1''. Voltage = 230 V. Power = 0.64 kW. Weight = 5.98 kg. Product type = drum pumps, electric. For acids and slightly alkaline solutions. Practical pump set for 200 litre drums - ready for immediate use. Safe, fast emptying of drums. Low pump weight - easy and pleasant to handle. Electric drum pump set for 200 litre drums - for acids and slightly alkaline solutions Max. 93 l/min, max. 11 m height, max. viscosity 600 mPas, max. density 1.5 g/cm. PP pump unit with HC shaft , PVC hose, PP nozzle with FKM seals. Drum pump motor: 230 V, 50/60 Hz, 640 W, protection class IP24, double insulation for protection class II, overcurrent circuit breaker with zero voltage trip, 5 m cable with safety plug. Pump unit: Polypropylene, external 41 mm, immersion tube length 1000 mm for 200 litre drum, HC shaft, connection thread G 1 1/4'', hose connection 1'' (NW 25) 2 m hose made of PVC 1'' (NW 25) 2 stainless steel hose clamps. 1 polypropylene nozzle 1'' with FKM seals. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 1639.99

1

2x JESSBERGER Electric Drum Pump Set, for Highly Aggressive Chemicals, IP24, 112 L/min, 16 M Height

Electric drum pump set, for highly aggressive chemicals, IP24, 112 l/min, 16 m height, 2+ items. Supplied = pre-assembled, final assembly by customer. Design of pump = electric container pump set for drums. For media = highly aggressive media, highly aggressive acids. Material of pump = polyvinylidene fluoride (PVDF) Drive shaft material = Hastelloy. Immersion depth = 1000 mm. Immersion tube diameter = 41 mm. Pump rate = 112 l/min. Pumping height = 16 m wc. Tube diameter = 41 mm. Immersion tube length = 1000 mm. Nominal hose diameter = 25. Thread = 1 1/4 inch. Max. viscosity at +20 C = 1000 mPas. Feature = protection class IP24. Scope of delivery = pump, 2 m crosslinked PE hose 1'' (NW 25) , 2 stainless steel hose clamps, 1 PVDF nozzle 1''. Voltage = 230 V. Power = 0.825 kW. Weight = 7.84 kg. Product type = drum pumps, electric. For highly aggressive chemicals, acids, etc. - protection class IP24. Practical pump set for 200 litre drums - ready for immediate use. Safe, fast emptying of drums. Low pump weight - easy and pleasant to handle. Electric drum pump set for 200 litre drums - for highly aggressive chemicals, acids Max. 112 l/min, max. 16 m height, max. viscosity 1000 mPas, max. density 1.9 g/cm. PVDF pump unit , crosslinked polyethylene hose, PVDF nozzle with FKM seals. Drum pump motor 230 V, 50/60 Hz, 825 W, protection class IP24 , double insulation for protection class II, overcurrent circuit breaker with zero voltage trip, 5 m cable with safety plug. Pump unit: PVDF, external 41 mm, immersion tube length 1000 mm for 200 litre drum, HC shaft, connection thread G 1 1/4'', hose connection 1'' (NW 25) 2 m hose made of crosslinked PE 1'' (NW 25) 2 stainless steel hose clamps. 1 PVDF nozzle 1'' with FKM seals. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 5999.98

1

JESSBERGER Electric Drum Pump Set - For Slightly Aggressive Acids And Slightly Alkaline Solutions - 16 M Height

Electric drum pump set, for slightly aggressive acids and slightly alkaline solutions, 112 l/min, 16 m height. Supplied = pre-assembled, final assembly by customer. Design of pump = electric container pump set for drums. For media = slightly alkaline solutions, slightly aggressive acids. Material of pump = polypropylene (PP) Drive shaft material = Hastelloy. Immersion depth = 1000 mm. Immersion tube diameter = 41 mm. Pump rate = 112 l/min. Pumping height = 16 m wc. Tube diameter = 41 mm. Immersion tube length = 1000 mm. Nominal hose diameter = 25. Thread = 1 1/4 inch. Max. viscosity at +20 C = 1000 mPas. Scope of delivery = pump, 2 m PVC hose 1'' (NW 25) , 2 stainless steel hose clamps, 1 polypropylene nozzle 1''. Voltage = 230 V. Power = 0.825 kW. Weight = 6.1 kg. Product type = drum pumps, electric. For slightly aggressive acids and slightly alkaline solutions. Practical pump set for 200 litre drums - ready for immediate use. Safe, fast emptying of drums. Low pump weight - easy and pleasant to handle. Electric drum pump set for 200 litre drums - for slightly aggressive acids and slightly alkaline solutions PP pump unit with HC shaft , PVC hose, PP nozzle with FKM seals. Drum pump motor 230 V, 50/60 Hz, 825 W, protection class IP24, double insulation for protection class II, overcurrent circuit breaker with zero voltage trip, 5 m cable with safety plug. Pump unit: Polypropylene, external 41 mm, immersion tube length 1000 mm for 200 litre drum, HC shaft, connection thread G 1 1/4'', hose connection 1'' (NW 25) 2 m hose made of PVC 1'' (NW 25) 2 stainless steel hose clamps. 1 polypropylene nozzle 1'' with FKM seals. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 1699.99

1

2x JESSBERGER Electric Drum Pump Set, For Alkaline Solutions, 112 L/min, 16 M Height

Electric drum pump set, for alkaline solutions, 112 l/min, 16 m height, 2+ items. Supplied = pre-assembled, final assembly by customer. Design of pump = electric container pump set for drums. For media = alkalis. Material of pump = polypropylene (PP) Drive shaft material = Hastelloy. Immersion depth = 1000 mm. Immersion tube diameter = 41 mm. Pump rate = 112 l/min. Pumping height = 16 m wc. Tube diameter = 41 mm. Immersion tube length = 1000 mm. Nominal hose diameter = 25. Thread = 1 1/4 inch. Max. viscosity at +20 C = 1000 mPas. Scope of delivery = pump, 2 m EPDM hose 1'' (NW 25) , 2 stainless steel hose clamps, 1 PP nozzle 1''. Voltage = 230 V. Power = 0.825 kW. Weight = 7.72 kg. Product type = drum pumps, electric. For alkaline solutions. Practical pump set for 200 litre drums - ready for immediate use. Safe, fast emptying of drums. Low pump weight - easy and pleasant to handle. Electric drum pump set for 200 litre drums - for alkaline solutions Max. 112 l/min, max. 16 m height, max. viscosity 1000 mPas, max. density 1.9 g/cm. Polypropylene pump unit with HC shaft , EPDM hose, polypropylene nozzle with EPDM seals. Drum pump motor 230 V, 50/60 Hz, 825 W, protection class IP24, double insulation for protection class II, overcurrent circuit breaker with zero voltage trip, 5 m cable with safety plug. Pump unit: PP, external 41 mm, immersion tube length 1000 mm for 200 litre drum, HC shaft, connection thread G 1 1/4'', hose connection 1'' (NW 25) 2 m hose made of EPDM 1'' (NW 25) 2 stainless steel hose clamps. 1 PP nozzle 1'' with EPDM seals. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.

GBP 4399.98

1

2x JESSBERGER Electric Tank Container Pump Set - For Neutral and Slightly Aggressive Media - 30 - 40 L/Min

Electric tank container pump set, for neutral and slightly aggressive media, stainless steel, 30 - 40 l/min, 2+ items. Supplied = pre-assembled, final assembly by customer. Design of pump = container pump set. For media = suitable for all neutral, slightly aggressive and non-flammable media. Type of connection = AG 1''. Material of pump = stainless steel. Drive shaft material = stainless steel. Immersion depth = 1200 mm. Immersion tube diameter = 32 mm. Pump rate = 30 - 40 l/min. Pumping height = 10 m wc. Tube diameter = 32 mm. Immersion tube length = 1200 mm. Nominal hose diameter = 3/4''. Thread = AG 1 inch. Max. viscosity at +20 C = 400 mPas. Feature = max. density 1.3. Scope of delivery = pump, 2 m PVC hose 3/4'', 2 stainless steel hose clamps, 1 polypropylene tap/nozzle. Voltage = 230 V. Power = 450 kW. Weight = 6.44 kg. Product type = tank container pumps, electric. High quality and robust due to the material stainless steel 1.4571. Safe and fast refilling and filling of chemicals. Suitable for IBC/CTC tank containers. Electric container pump set made of stainless steel for IBC/CTC tank containers. Suitable for all neutral, slightly aggressive and non-flammable media Pump rate 30 - 40 litres/min. Universal electric motor, 230 V, 50/60 Hz, 250 W, protection class IP24, double insulation for protection class II, overcurrent circuit breaker with integrated zero voltage trip, thermal protection, 5 m cable with safety plug. Stainless steel pump unit , external 32 mm, immersion tube length 1200 mm, stainless steel shaft, connection thread G 1'', hose connection 3/4''. 2 m hose made of PVC 3/4''. 2 stainless steel hose clamps. 1 polypropylene tap/nozzle with seals made of FKM 3/4''. Please note: if media compatibility is unclear, please enquire about the suitability of pumps beforehand.