209 results (0,15122 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Iscar TGTR 2525-3 Toolholder

Iscar TGTR 2525-3 Toolholder

Blade Advantages There is no chip obstruction when applying varible machining conditions. The free chip flow provides excellent surface finish and increases the blade's tool life. The new blade is now taller and the insert is better supported resulting in a more rigid design compared to the current blade. It features higher rigidity and is capable of bearing heavier insert loads (higher feed). As the new blade is taller and longer, it can be used for deeper parting and grooving applications. The new design reduces blade vibrations when using a long overhang and improves part straightness. Block Features The new block is similar to ISCAR's existing SGTBu blocks aside from the center height dimension. The new block can carry blades which are 2 to 7mm in widths. Competitor's blades cannot be used on this new block.

GBP 169.99
1

Iscar TGSU 35-2 Tang Grip Blade

Iscar TGSU 35-2 Tang Grip Blade

Iscar TGSU 35 TANG-GRIP Parting and Grooving Blades deliver the following benefits: There is no chip obstruction when applying variable machining conditions. The free chip flow provides excellent surface finish and increases the blade?s tool life. The new blade is now taller and the insert is better supported resulting in a more rigid design compared to the current blade. It features higher rigidity and is capable of bearing heavier insert loads (higher feed). As the new blade is taller and longer, it can be used for deeper parting and grooving applications. The new design reduces blade vibrations when using a long overhang and improves part straightness. Block Features The new block is similar to ISCAR?s existing SGTBu blocks aside from the centre height dimension. The new block can carry blades which are 2 to 7mm in width. Competitor?s blades cannot be used on this new block. For dimensional specification please refer to the PDF of the catalogue.

GBP 139.99
1

Iscar EC-E4L 16-34/50C16CF100 Chatter Free Carbide E/M

Iscar EC-E4L 16-34/50C16CF100 Chatter Free Carbide E/M

EC-E4L...CF 4 Flute CHATTERFREE, 38 Helix, Medium Length End Mills ISCAR is introducing 38 helix end mills with variable pitch for roughing and finishing operations. The new ECCF solid end mills feature excellent chatter dampening ability, due to their variable pitch. The new solid endmills are available in 6 to 20mm. These new end mills are an excellent solution for low power machines with ISO40 or BT40 adaptations, improving their material removal rate and eliminating vibration.They can be used for up to 2XD full slot machining of alloy and stainless steel, titanium and exotic materials. ISCARs new CHATTERFREE end mills maximise stock removal rate and reduce cycle time in most milling operations. Their unique ground geometry provides excellent surface finish and long tool life while machining at high material removal rates.

GBP 229.99
1

Iscar EC-E4L 10-22/32C10CF72 CHATTERFREE CARBIDE E/M

Iscar EC-E4L 10-22/32C10CF72 CHATTERFREE CARBIDE E/M

EC-E4L...CF 4 Flute CHATTERFREE, 38 Helix, Medium Length End Mills ISCAR is introducing 38 helix end mills with variable pitch for roughing and finishing operations. The new ECCF solid end mills feature excellent chatter dampening ability, due to their variable pitch. The new solid endmills are available in 6 to 20mm. These new end mills are an excellent solution for low power machines with ISO40 or BT40 adaptations, improving their material removal rate and eliminating vibration.They can be used for up to 2XD full slot machining of alloy and stainless steel, titanium and exotic materials. ISCARs new CHATTERFREE end mills maximise stock removal rate and reduce cycle time in most milling operations. Their unique ground geometry provides excellent surface finish and long tool life while machining at high material removal rates.

GBP 113.99
1

Iscar H490 F90AX D040-6-16-09 Helido Face Mill

Iscar H490 F90AX D040-6-16-09 Helido Face Mill

H490 F90AX...-09 Face Mills Face Mills with double-sided inserts, diameter range 32-63mm. The new HELIDO H490 ANKX rectangular inserts have 4 helical right-hand positive cutting edges. They were designed in cutting edge lengths of 9, 12 and 17 mm. Insert construction is very thick and strong; clamped into a dovetail inclined pocket which provides a very rigid clamping and has a wiper which leaves an excellent surface finish. Due to its strong construction, unique chip deflector with positive cutting angles and excellent grade combinations, this new family features high durability, low cutting forces and long tool life. Our most advanced SUMO TEC grades ensure excellent performance and reliability. The new HELIDO tools can be used for machining steel, stainless steel and cast iron at very high machining parameters. HELIDO's state-of-the-art of milling insert design, enables excellent performance and extremely high productivity. H490 - A new family of double-sided inserts with 4 helical cutting edges.

GBP 499.99
1

Iscar H490 F90AX D050-7-22-09 Helido Face Mill

Iscar H490 F90AX D050-7-22-09 Helido Face Mill

H490 F90AX...-09 Face Mills Face Mills with double-sided inserts, diameter range 32-63mm. The new HELIDO H490 ANKX rectangular inserts have 4 helical right-hand positive cutting edges. They were designed in cutting edge lengths of 9, 12 and 17 mm. Insert construction is very thick and strong; clamped into a dovetail inclined pocket which provides a very rigid clamping and has a wiper which leaves an excellent surface finish. Due to its strong construction, unique chip deflector with positive cutting angles and excellent grade combinations, this new family features high durability, low cutting forces and long tool life. Our most advanced SUMO TEC grades ensure excellent performance and reliability. The new HELIDO tools can be used for machining steel, stainless steel and cast iron at very high machining parameters. HELIDO's state-of-the-art of milling insert design, enables excellent performance and extremely high productivity. H490 - A new family of double-sided inserts with 4 helical cutting edges.

GBP 569.99
1

Iscar H490 F90AX D063-9-22-09 Helido Face Mill

Iscar H490 F90AX D063-9-22-09 Helido Face Mill

H490 F90AX...-09 Face Mills Face Mills with double-sided inserts, diameter range 32-63mm. The new HELIDO H490 ANKX rectangular inserts have 4 helical right-hand positive cutting edges. They were designed in cutting edge lengths of 9, 12 and 17 mm. Insert construction is very thick and strong; clamped into a dovetail inclined pocket which provides a very rigid clamping and has a wiper which leaves an excellent surface finish. Due to its strong construction, unique chip deflector with positive cutting angles and excellent grade combinations, this new family features high durability, low cutting forces and long tool life. Our most advanced SUMO TEC grades ensure excellent performance and reliability. The new HELIDO tools can be used for machining steel, stainless steel and cast iron at very high machining parameters. HELIDO's state-of-the-art of milling insert design, enables excellent performance and extremely high productivity. H490 - A new family of double-sided inserts with 4 helical cutting edges.

GBP 699.99
1

Iscar SOF45 8/16-D040-04-22R Face Mill

Iscar SOF45 8/16-D040-04-22R Face Mill

ISCAR Helido? 845 Line face mills are a unique family of 45 milling cutters for heavy duty applications. These new tools can carry in their pockets either the S845 SNMU 1305 - square, double-sided inserts with 8 cutting edges or the ONMU 0505 octagonal, double-sided inserts with 16 cutting edges - the most economical insert regarding price per cutting edge. Both inserts have helical cutting edges and positive rake angles, providing low power consumption and excellent surface finish. These new inserts are available in the most advanced SUMO TEC carbide grades.

GBP 499.99
1

Iscar SOF45 8/16-D080-07-27R Face Mill

Iscar SOF45 8/16-D080-07-27R Face Mill

ISCAR Helido? 845 Line face mills are a unique family of 45 milling cutters for heavy duty applications. These new tools can carry in their pockets either the S845 SNMU 1305 - square, double-sided inserts with 8 cutting edges or the ONMU 0505 octagonal, double-sided inserts with 16 cutting edges - the most economical insert regarding price per cutting edge. Both inserts have helical cutting edges and positive rake angles, providing low power consumption and excellent surface finish. These new inserts are available in the most advanced SUMO TEC carbide grades.

GBP 759.99
1

Iscar H600 WXCU Indexable Milling Inserts

Iscar H600 WXCU Indexable Milling Inserts

H600 WXCU Milling Inserts Iscar has merged three proven ideas into their new Helido Feedmill inserts for high-feed rough milling and cavity work in die & mold shops. The new H600 WXCU inserts feature helical cutting edges for smoother entry, 17 lead angles to reduce lateral forces and SUMO TEC surface treatment for longer edge life. Each trigon shaped insert provides six peripherally ground cutting edges and is seated securely into inclined dovetail pockets to prevent movement. The new insert is available in extra-durable SUMO TEC grades and a broad choice of rake angles to suit a wide range of materials and applications. Cutters that accommodate them are available in diameters from 50 to 125 mm (2 to 5) Insert Grade IC808 (P15-P30)(M20-M30)(K20-K40)(H10-H20)(S10-S25) Coating Layer TiAlN/AlTiN+TiN PVD coated insert for use on stainless steel and high temperature alloys

GBP 24.99
1

Iscar H600 WXCU 040310T Insert Grade IC808

Iscar H600 WXCU 040310T Insert Grade IC808

H600 WXCU Milling Inserts Iscar has merged three proven ideas into their new Helido Feedmill inserts for high-feed rough milling and cavity work in die & mold shops. The new H600 WXCU inserts feature helical cutting edges for smoother entry, 17 lead angles to reduce lateral forces and SUMO TEC surface treatment for longer edge life. Each trigon shaped insert provides six peripherally ground cutting edges and is seated securely into inclined dovetail pockets to prevent movement. The new insert is available in extra-durable SUMO TEC grades and a broad choice of rake angles to suit a wide range of materials and applications. Cutters that accommodate them are available in diameters from 50 to 125 mm (2 to 5) Insert Grade IC808 (P15-P30)(M20-M30)(K20-K40)(H10-H20)(S10-S25) Coating Layer TiAlN/AlTiN+TiN PVD coated insert for use on stainless steel and high temperature alloys

GBP 21.99
1

Iscar ONMU 050505-TN-MM Insert Grade IC808

Iscar ONMU 050505-TN-MM Insert Grade IC808

ONMU Milling Inserts Insert Grade: IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN Iscar's ONMU octagonal, double-sided inserts with16 cutting edges are the most economical insert regarding price per cutting edge. The inserts have helical cutting edges and positive rake angles, featuring low power consumption and excellent surface finish. The new inserts are available in the most advanced SUMO TEC carbide grades.

GBP 169.99
1

Iscar H600 WXCU Indexable Milling Inserts

Iscar H600 WXCU Indexable Milling Inserts

Wiht theh H600 WXCU Milling Inserts, Iscar has merged three proven ideas into their new Helido Feedmill inserts for high-feed rough milling and cavity work in die & mold shops. The new H600 WXCU inserts feature helical cutting edges for smoother entry, 17 lead angles to reduce lateral forces and SUMO TEC surface treatment for longer edge life. Each trigon shaped insert provides six peripherally ground cutting edges and is seated securely into inclined dovetail pockets to prevent movement. Features and Benefits Coated with SUMO TEC surface treatment for added durability Features a tough grade TiCN+TiN PVD Double sided with 6 cutting edges for fast feed machining Typical Applications Milling Interrupted cutting Heavy machining operations Standards ISO Range - P/M/K: (P20-P40)(M35-M45) ISO Range - H/S/N: (S15-S30) Insert Grade : IC830

GBP 24.99
1

Iscar SOMT 160512-DT Insert Grade IC908

Iscar SOMT 160512-DT Insert Grade IC908

SOMT-DT: Inserts with a DT chipformer for DR drills, for general applications at medium-to-high feed rates. Grade: IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Grade: IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN

GBP 12.29
1

Iscar H600 WXCU 05T312HP Insert Grade IC830

Iscar H600 WXCU 05T312HP Insert Grade IC830

Wiht theh H600 WXCU Milling Inserts, Iscar has merged three proven ideas into their new Helido Feedmill inserts for high-feed rough milling and cavity work in die & mold shops. The new H600 WXCU inserts feature helical cutting edges for smoother entry, 17 lead angles to reduce lateral forces and SUMO TEC surface treatment for longer edge life. Each trigon shaped insert provides six peripherally ground cutting edges and is seated securely into inclined dovetail pockets to prevent movement. Features and Benefits Coated with SUMO TEC surface treatment for added durability Features a tough grade TiCN+TiN PVD Double sided with 6 cutting edges for fast feed machining Typical Applications Milling Interrupted cutting Heavy machining operations Standards ISO Range - P/M/K: (P20-P40)(M35-M45) ISO Range - H/S/N: (S15-S30) Insert Grade : IC830

GBP 24.99
1

Iscar SOMT 120408-DT Insert Grade IC908

Iscar SOMT 120408-DT Insert Grade IC908

SOMT-DT: Inserts with a DT chipformer for DR drills, for general applications at medium-to-high feed rates. Grade: IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Grade: IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN

GBP 13.99
1

10x Iscar SOMT 09T306-DT Insert Grade IC808

10x Iscar SOMT 09T306-DT Insert Grade IC808

SOMT-DT: Inserts with a DT chipformer for DR drills, for general applications at medium-to-high feed rates. Grade: IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Grade: IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN

GBP 142.90
1

Iscar H600 WXCU 040310T Insert Grade IC830

Iscar H600 WXCU 040310T Insert Grade IC830

Wiht theh H600 WXCU Milling Inserts, Iscar has merged three proven ideas into their new Helido Feedmill inserts for high-feed rough milling and cavity work in die & mold shops. The new H600 WXCU inserts feature helical cutting edges for smoother entry, 17 lead angles to reduce lateral forces and SUMO TEC surface treatment for longer edge life. Each trigon shaped insert provides six peripherally ground cutting edges and is seated securely into inclined dovetail pockets to prevent movement. Features and Benefits Coated with SUMO TEC surface treatment for added durability Features a tough grade TiCN+TiN PVD Double sided with 6 cutting edges for fast feed machining Typical Applications Milling Interrupted cutting Heavy machining operations Standards ISO Range - P/M/K: (P20-P40)(M35-M45) ISO Range - H/S/N: (S15-S30) Insert Grade : IC830

GBP 20.99
1

Iscar SOMT 09T306-DT Insert Grade IC908

Iscar SOMT 09T306-DT Insert Grade IC908

SOMT-DT: Inserts with a DT chipformer for DR drills, for general applications at medium-to-high feed rates. Grade: IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Grade: IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN

GBP 13.29
1

Iscar SOMT 060204-DT Insert Grade IC908

Iscar SOMT 060204-DT Insert Grade IC908

SOMT-DT: Inserts with a DT chipformer for DR drills, for general applications at medium-to-high feed rates. Grade: IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Grade: IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN

GBP 92.99
1

Iscar SOMT 120408-DT Insert Grade IC808

Iscar SOMT 120408-DT Insert Grade IC808

SOMT-DT: Inserts with a DT chipformer for DR drills, for general applications at medium-to-high feed rates. Grade: IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Grade: IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN

GBP 15.39
1

10x Iscar SOMT 09T306-DT Insert GRADEIC9080

10x Iscar SOMT 09T306-DT Insert GRADEIC9080

SOMT-DT: Inserts with a DT chipformer for DR drills, for general applications at medium-to-high feed rates. Grade: IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Grade: IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN

GBP 132.90
1

Iscar H600 WXCU 05T312T Insert Grade IC830

Iscar H600 WXCU 05T312T Insert Grade IC830

Wiht theh H600 WXCU Milling Inserts, Iscar has merged three proven ideas into their new Helido Feedmill inserts for high-feed rough milling and cavity work in die & mold shops. The new H600 WXCU inserts feature helical cutting edges for smoother entry, 17 lead angles to reduce lateral forces and SUMO TEC surface treatment for longer edge life. Each trigon shaped insert provides six peripherally ground cutting edges and is seated securely into inclined dovetail pockets to prevent movement. Features and Benefits Coated with SUMO TEC surface treatment for added durability Features a tough grade TiCN+TiN PVD Double sided with 6 cutting edges for fast feed machining Typical Applications Milling Interrupted cutting Heavy machining operations Standards ISO Range - P/M/K: (P20-P40)(M35-M45) ISO Range - H/S/N: (S15-S30) Insert Grade : IC830

GBP 154.48
1