316 results (0,25642 seconds)

Show all filters

Brand

Size

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Huntingdon Fusion Techniques Purgenet Dew Point Purging Gas Moisture Sensor DPS1000

Huntingdon Fusion Techniques Purgenet Dew Point Purging Gas Moisture Sensor DPS1000

The HFT PurgeNet Dew Point Purging Gas Moisture Sensor revolutionises the measurement of the dew point for critical welds, making it incredibly easy. With its seamless integration capability into any of Huntingdon Fusion's high spec PurgEye Weld Purge Monitors, the HFT PurgeNet Dew Point Purging Gas Moisture Sensor eliminates the need for Companies involved in critical joint welding to invest in a separate and costly Dew Point Meter, offering accurate readings down to 1 ppm (with a precision of 10 ppm) . Dew Point Purging Gas Moisture Sensor is suitable for the following types of gases: Argon (Ar) Oxygen (O2) Nitrogen (N2) Hydrogen (H2) Carbon Dioxide (CO2) Features Integration Compatibility: It is designed to seamlessly integrate with high spec PurgEye Weld Purge Monitors, providing a comprehensive solution for measuring both dew point and weld purge parameters. Dew Point Measurement: The sensor is specifically designed for accurate measurement of the dew point, enabling precise assessment of moisture levels in the purging gas during critical welds. Wide Reading Range: It can measure dew points down to 1 ppm, ensuring high sensitivity and enabling precise control of moisture levels. The accuracy of the measurements is rated at 10 ppm. Cost Savings: By eliminating the need to purchase a separate and expensive dew point meter, the HFT PurgeNet Dew Point Purging Gas Moisture Sensor helps companies reduce costs and streamline their welding processes. User-Friendly: The sensor is designed to be user-friendly and easy to operate, simplifying the measurement process for welders and technicians. Reliability: It is built to deliver reliable and consistent results, ensuring that critical welds are performed under optimal conditions with controlled moisture levels. Durability: The sensor is constructed with durable materials to withstand the harsh environments typically encountered during welding operations, ensuring its longevity and performance. Compatibility PurgEye 200 PurgEye 500 Desk PurgEye 600 PurgEye 1000 Remote PurgEye 1500 Site FAQs 1. What is Dew? Dew is expressed as drops of liquid water that condense from the atmosphere and onto any solid surface like metal. 2. What is the Dew Point? The dew point is the temperature in C or F at which air is saturated with water vapour (also referred to as humidity) Below the dew point, water will begin to condense on solid surfaces in the welding environment. 3. How does water moisture affect the quality of the weld joint? Under arc conditions, water is broken down into hydrogen and oxygen in atomic form which, when present in weld metal, cause porosity and are known to create cracking in the weld joint. 4. Why should I use a Dew Point Purging Gas Moisture Sensor? Using the PurgeNet Dew Point Purging Gas Moisture Sensor while welding is the easiest method for indicating when water will condense on solid surfaces in the welding zone. Water can form as moisture on metal surfaces while welding and it is important to be able to measure Dew Point while welding lengthy critical joints as conditions can change during the welding process. 5. How does the Dew Point Purging Gas Moisture Sensor give readings? The PurgEye Dew Point Sensor accessory has been designed to integrate with most of the Argweld Weld Purge Monitors via the PurgeNet lead that is supplied with them, thereby giving values and water present on the same screen. In this way, the user is not forced into the purchase of an expensive, separate Dew Point Monitor that will give its reading elsewhere. 6. Which Weld Purge Monitors are compatible with the Dew Point Purging Gas Moisture Sensor? The PurgeNet Dew Point Purging Gas Moisture Sensor is compatible with the PurgEye 200, 500 Desk, 600, 1000 Remote and 1500 Site.

GBP 4299.99
1

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 20m

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 20m

Huntingdon Fusion Technique's (HFT) off-the-shelf Argon Feed Hose is available in a variety of standard lengths, including 30m, 25m, 20m, 15m, 10m, and 5m. Each assembly is crafted to meet high-quality standards and comes equipped with an argon regulator fitting on one end and a 12 mm to 12 mm quick connect fitting on the other end. We also offer a range of alternative fittings, such as hose tails, tailpieces, and various quick disconnect options. What's In The Box APBS409 - Coupling, Female Thread 3/8" BSP (to fit cylinder regulator) APBS412 - Hose Tail 6.35 mm (1/4") ID to suit APBS409 APBS411 - Male threaded tailpiece 1/4" to suit APGV5002 Order APGV5002 to fit to PurgElite, PurgExtra, QuickPurge and HotPurge Inflatable Tube, Pipe and Pipeline Weld Purging Systems. FAQs 1. Do I have to attach the fittings to the hose myself? No, the hose comes complete with the fittings crimped onto each end. 2. I require a length of hose not shown on the price list, is this possible? Yes, contact us with your desired length and they will quote a price. 3. Is there a maximum length? Yes, 100m is the longest length in a straight run, however longer lengths can be made up with joining connectors. 4. Is the hose stamped with the specification? Yes, each length of hose is marked in white ink along the length with the specification: Argon Gas Hose BS EN 559 20 Bar (300 PSI) WP-MM.ID. 5. Do you keep good stocks? Yes, we have hose and all fittings in stock and lengths can be made up quickly by our assembly team. 6. Can I purchase the fittings separately if required? Yes, all fittings can be bought individually. 7. Does the hose have a British Standard? Yes, it is BS EN 559. 8. What is the temperature resistance range of the hose? From -30C up to +80C. 9. Is the hose just for argon? No, it can also be used for nitrogen. 10. How much does it weigh? 0.16 kg per metre. 11. What are the dimensions of the hose? The ID is 6 mm and the OD is 13 mm. 12. What is the maximum pressure rating of the hose? Working pressure is 300 psi, 20 bar.

GBP 129.99
1

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 10m

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 10m

Huntingdon Fusion Technique's (HFT) off-the-shelf Argon Feed Hose is available in a variety of standard lengths, including 30m, 25m, 20m, 15m, 10m, and 5m. Each assembly is crafted to meet high-quality standards and comes equipped with an argon regulator fitting on one end and a 12 mm to 12 mm quick connect fitting on the other end. We also offer a range of alternative fittings, such as hose tails, tailpieces, and various quick disconnect options. What's In The Box APBS409 - Coupling, Female Thread 3/8" BSP (to fit cylinder regulator) APBS412 - Hose Tail 6.35 mm (1/4") ID to suit APBS409 APBS411 - Male threaded tailpiece 1/4" to suit APGV5002 Order APGV5002 to fit to PurgElite, PurgExtra, QuickPurge and HotPurge Inflatable Tube, Pipe and Pipeline Weld Purging Systems. FAQs 1. Do I have to attach the fittings to the hose myself? No, the hose comes complete with the fittings crimped onto each end. 2. I require a length of hose not shown on the price list, is this possible? Yes, contact us with your desired length and we will quote a price. 3. Is there a maximum length? Yes, 100m is the longest length in a straight run; however, longer lengths can be made up with joining connectors. 4. Is the hose stamped with the specification? Yes, each length of hose is marked in white ink along the length with the specification: Argon Gas Hose BS EN 559 20 Bar (300 PSI) WP-MM.ID. 5. Do you keep good stocks? Yes, we have hose and all fittings in stock, and lengths can be made up quickly by our assembly team. 6. Can I purchase the fittings separately if required? Yes, all fittings can be bought individually. 7. Does the hose have a British Standard? Yes, it is BS EN 559. 8. What is the temperature resistance range of the hose? From -30C up to +80C. 9. Is the hose just for argon? No, it can also be used for nitrogen. 10. How much does it weigh? 0.16 kgs per metre. 11. What are the dimensions of the hose? The ID is 6 mm and the OD is 13 mm. 12. What is the maximum pressure rating of the hose? Working pressure is 300 psi, 20 bar.

GBP 89.99
1

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 5m

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 5m

Huntingdon Fusion Technique's (HFT) off-the-shelf Argon Feed Hose is available in a variety of standard lengths, including 30m, 25m, 20m, 15m, 10m, and 5m. Each assembly is crafted to meet high-quality standards and comes equipped with an argon regulator fitting on one end and a 12 mm to 12 mm quick connect fitting on the other end. We also offer a range of alternative fittings, such as hose tails, tailpieces, and various quick disconnect options. What's In The Box APBS409 - Coupling, Female Thread 3/8" BSP (to fit cylinder regulator) APBS412 - Hose Tail 6.35 mm (1/4") ID to suit APBS409 APBS411 - Male threaded tailpiece 1/4" to suit APGV5002 Order APGV5002 to fit to PurgElite, PurgExtra, QuickPurge and HotPurge Inflatable Tube, Pipe and Pipeline Weld Purging Systems. FAQs 1. Do I have to attach the fittings to the hose myself? No, the hose comes complete with the fittings crimped onto each end. 2. I require a length of hose not shown on the price list, is this possible? Yes, contact us with your desired length and they will quote a price. 3. Is there a maximum length? Yes, 100m is the longest length in a straight run, however longer lengths can be made up with joining connectors. 4. Is the hose stamped with the specification? Yes, each length of hose is marked in white ink along the length with the specification: Argon Gas Hose BS EN 559 20 Bar (300 PSI) WP-MM.ID. 5. Do you keep good stocks? Yes, we have hose and all fittings in stock and lengths can be made up quickly by our assembly team. 6. Can I purchase the fittings separately if required? Yes, all fittings can be bought individually. 7. Does the hose have a British Standard? Yes, it is BS EN 559. 8. What is the temperature resistance range of the hose? From -30C up to +80C. 9. Is the hose just for argon? No, it can also be used for nitrogen. 10. How much does it weigh? 0.16 kgs per metre. 11. What are the dimensions of the hose? The ID is 6 mm and the OD is 13 mm. 12. What is the maximum pressure rating of the hose? Working pressure is 300 psi, 20 bar.

GBP 69.99
1

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 25m

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 25m

Huntingdon Fusion Technique's (HFT) off-the-shelf Argon Feed Hose is available in a variety of standard lengths, including 30m, 25m, 20m, 15m, 10m, and 5m. Each assembly is crafted to meet high-quality standards and comes equipped with an argon regulator fitting on one end and a 12 mm to 12 mm quick connect fitting on the other end. We also offer a range of alternative fittings, such as hose tails, tailpieces, and various quick disconnect options. What's In The Box APBS409 - Coupling, Female Thread 3/8" BSP (to fit cylinder regulator) APBS412 - Hose Tail 6.35 mm (1/4") ID to suit APBS409 APBS411 - Male threaded tailpiece 1/4" to suit APGV5002 Order APGV5002 to fit to PurgElite, PurgExtra, QuickPurge and HotPurge Inflatable Tube, Pipe and Pipeline Weld Purging Systems. FAQs 1. Do I have to attach the fittings to the hose myself? No, the hose comes complete with the fittings crimped onto each end. 2. I require a length of hose not shown on the price list, is this possible? Yes, contact us with your desired length and they will quote a price. 3. Is there a maximum length? Yes, 100m is the longest length in a straight run, however longer lengths can be made up with joining connectors. 4. Is the hose stamped with the specification? Yes, each length of hose is marked in white ink along the length with the specification: Argon Gas Hose BS EN 559 20 Bar (300 PSI) WP-MM.ID. 5. Do you keep good stocks? Yes, we have hose and all fittings in stock and lengths can be made up quickly by our assembly team. 6. Can I purchase the fittings separately if required? Yes, all fittings can be bought individually. 7. Does the hose have a British Standard? Yes, it is BS EN 559. 8. What is the temperature resistance range of the hose? From -30C up to +80C. 9. Is the hose just for argon? No, it can also be used for nitrogen. 10. How much does it weigh? 0.16 kgs per metre. 11. What are the dimensions of the hose? The ID is 6 mm and the OD is 13 mm. 12. What is the maximum pressure rating of the hose? Working pressure is 300 psi, 20 bar.

GBP 149.99
1

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 15m

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 15m

Huntingdon Fusion Technique's (HFT) off-the-shelf Argon Feed Hose is available in a variety of standard lengths, including 30m, 25m, 20m, 15m, 10m, and 5m. Each assembly is crafted to meet high-quality standards and comes equipped with an argon regulator fitting on one end and a 12 mm to 12 mm quick connect fitting on the other end. We also offer a range of alternative fittings, such as hose tails, tailpieces, and various quick disconnect options. What's In The Box APBS409 - Coupling, Female Thread 3/8" BSP (to fit cylinder regulator) APBS412 - Hose Tail 6.35 mm (1/4") ID to suit APBS409 APBS411 - Male threaded tailpiece 1/4" to suit APGV5002 Order APGV5002 to fit to PurgElite, PurgExtra, QuickPurge and HotPurge Inflatable Tube, Pipe and Pipeline Weld Purging Systems. FAQs 1. Do I have to attach the fittings to the hose myself? No, the hose comes complete with the fittings crimped onto each end. 2. I require a length of hose not shown on the price list, is this possible? Yes, contact us with your desired length and we will quote a price. 3. Is there a maximum length? Yes, 100m is the longest length in a straight run; however, longer lengths can be made up with joining connectors. 4. Is the hose stamped with the specification? Yes, each length of hose is marked in white ink along the length with the specification: Argon Gas Hose BS EN 559 20 Bar (300 PSI) WP-MM.ID. 5. Do you keep good stocks? Yes, we have hose and all fittings in stock, and lengths can be made up quickly by our assembly team. 6. Can I purchase the fittings separately if required? Yes, all fittings can be bought individually. 7. Does the hose have a British Standard? Yes, it is BS EN 559. 8. What is the temperature resistance range of the hose? From -30C up to +80C. 9. Is the hose just for argon? No, it can also be used for nitrogen. 10. How much does it weigh? 0.16 kg per metre. 11. What are the dimensions of the hose? The ID is 6 mm and the OD is 13 mm. 12. What is the maximum pressure rating of the hose? Working pressure is 300 psi, 20 bar.

GBP 109.99
1

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 30m

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 30m

Huntingdon Fusion Technique's (HFT) off-the-shelf Argon Feed Hose is available in a variety of standard lengths, including 30m, 25m, 20m, 15m, 10m, and 5m. Each assembly is crafted to meet high-quality standards and comes equipped with an argon regulator fitting on one end and a 12 mm to 12 mm quick connect fitting on the other end. We also offer a range of alternative fittings, such as hose tails, tailpieces, and various quick disconnect options. What's In The Box APBS409 - Coupling, Female Thread 3/8" BSP (to fit cylinder regulator) APBS412 - Hose Tail 6.35 mm (1/4") ID to suit APBS409 APBS411 - Male threaded tailpiece 1/4" to suit APGV5002 Order APGV5002 to fit to PurgElite, PurgExtra, QuickPurge and HotPurge Inflatable Tube, Pipe and Pipeline Weld Purging Systems. FAQs 1. Do I have to attach the fittings to the hose myself? No, the hose comes complete with the fittings crimped onto each end. 2. I require a length of hose not shown on the price list, is this possible? Yes, contact us with your desired length and they will quote a price. 3. Is there a maximum length? Yes, 100m is the longest length in a straight run, however longer lengths can be made up with joining connectors. 4. Is the hose stamped with the specification? Yes, each length of hose is marked in white ink along the length with the specification: Argon Gas Hose BS EN 559 20 Bar (300 PSI) WP-MM.ID. 5. Do you keep good stocks? Yes, we have hose and all fittings in stock and lengths can be made up quickly by our assembly team. 6. Can I purchase the fittings separately if required? Yes, all fittings can be bought individually. 7. Does the hose have a British Standard? Yes, it is BS EN 559. 8. What is the temperature resistance range of the hose? From -30C up to +80C. 9. Is the hose just for argon? No, it can also be used for nitrogen. 10. How much does it weigh? 0.16 kgs per metre. 11. What are the dimensions of the hose? The ID is 6 mm and the OD is 13 mm. 12. What is the maximum pressure rating of the hose? Working pressure is 300 psi, 20 bar.

GBP 169.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 254mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 254mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 339.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 559mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 559mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 729.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 584mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 584mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 759.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 178mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 178mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 269.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 51mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 51mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 183.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 25mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 25mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 183.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 38mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 38mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 183.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 508mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 508mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 699.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 406mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 406mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 529.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 152mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 152mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 219.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 356mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 356mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 439.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 76mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 76mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 183.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 102mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 102mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 179.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 457mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 457mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 619.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 533mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 533mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 699.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 305mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 305mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 359.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 203mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 203mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 329.99
1