27 results (0,14389 seconds)

Show all filters

Brand

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 30m

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 30m

Huntingdon Fusion Technique's (HFT) off-the-shelf Argon Feed Hose is available in a variety of standard lengths, including 30m, 25m, 20m, 15m, 10m, and 5m. Each assembly is crafted to meet high-quality standards and comes equipped with an argon regulator fitting on one end and a 12 mm to 12 mm quick connect fitting on the other end. We also offer a range of alternative fittings, such as hose tails, tailpieces, and various quick disconnect options. What's In The Box APBS409 - Coupling, Female Thread 3/8" BSP (to fit cylinder regulator) APBS412 - Hose Tail 6.35 mm (1/4") ID to suit APBS409 APBS411 - Male threaded tailpiece 1/4" to suit APGV5002 Order APGV5002 to fit to PurgElite, PurgExtra, QuickPurge and HotPurge Inflatable Tube, Pipe and Pipeline Weld Purging Systems. FAQs 1. Do I have to attach the fittings to the hose myself? No, the hose comes complete with the fittings crimped onto each end. 2. I require a length of hose not shown on the price list, is this possible? Yes, contact us with your desired length and they will quote a price. 3. Is there a maximum length? Yes, 100m is the longest length in a straight run, however longer lengths can be made up with joining connectors. 4. Is the hose stamped with the specification? Yes, each length of hose is marked in white ink along the length with the specification: Argon Gas Hose BS EN 559 20 Bar (300 PSI) WP-MM.ID. 5. Do you keep good stocks? Yes, we have hose and all fittings in stock and lengths can be made up quickly by our assembly team. 6. Can I purchase the fittings separately if required? Yes, all fittings can be bought individually. 7. Does the hose have a British Standard? Yes, it is BS EN 559. 8. What is the temperature resistance range of the hose? From -30C up to +80C. 9. Is the hose just for argon? No, it can also be used for nitrogen. 10. How much does it weigh? 0.16 kgs per metre. 11. What are the dimensions of the hose? The ID is 6 mm and the OD is 13 mm. 12. What is the maximum pressure rating of the hose? Working pressure is 300 psi, 20 bar.

GBP 169.99
1

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 15m

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 15m

Huntingdon Fusion Technique's (HFT) off-the-shelf Argon Feed Hose is available in a variety of standard lengths, including 30m, 25m, 20m, 15m, 10m, and 5m. Each assembly is crafted to meet high-quality standards and comes equipped with an argon regulator fitting on one end and a 12 mm to 12 mm quick connect fitting on the other end. We also offer a range of alternative fittings, such as hose tails, tailpieces, and various quick disconnect options. What's In The Box APBS409 - Coupling, Female Thread 3/8" BSP (to fit cylinder regulator) APBS412 - Hose Tail 6.35 mm (1/4") ID to suit APBS409 APBS411 - Male threaded tailpiece 1/4" to suit APGV5002 Order APGV5002 to fit to PurgElite, PurgExtra, QuickPurge and HotPurge Inflatable Tube, Pipe and Pipeline Weld Purging Systems. FAQs 1. Do I have to attach the fittings to the hose myself? No, the hose comes complete with the fittings crimped onto each end. 2. I require a length of hose not shown on the price list, is this possible? Yes, contact us with your desired length and we will quote a price. 3. Is there a maximum length? Yes, 100m is the longest length in a straight run; however, longer lengths can be made up with joining connectors. 4. Is the hose stamped with the specification? Yes, each length of hose is marked in white ink along the length with the specification: Argon Gas Hose BS EN 559 20 Bar (300 PSI) WP-MM.ID. 5. Do you keep good stocks? Yes, we have hose and all fittings in stock, and lengths can be made up quickly by our assembly team. 6. Can I purchase the fittings separately if required? Yes, all fittings can be bought individually. 7. Does the hose have a British Standard? Yes, it is BS EN 559. 8. What is the temperature resistance range of the hose? From -30C up to +80C. 9. Is the hose just for argon? No, it can also be used for nitrogen. 10. How much does it weigh? 0.16 kg per metre. 11. What are the dimensions of the hose? The ID is 6 mm and the OD is 13 mm. 12. What is the maximum pressure rating of the hose? Working pressure is 300 psi, 20 bar.

GBP 119.99
1

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 25m

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 25m

Huntingdon Fusion Technique's (HFT) off-the-shelf Argon Feed Hose is available in a variety of standard lengths, including 30m, 25m, 20m, 15m, 10m, and 5m. Each assembly is crafted to meet high-quality standards and comes equipped with an argon regulator fitting on one end and a 12 mm to 12 mm quick connect fitting on the other end. We also offer a range of alternative fittings, such as hose tails, tailpieces, and various quick disconnect options. What's In The Box APBS409 - Coupling, Female Thread 3/8" BSP (to fit cylinder regulator) APBS412 - Hose Tail 6.35 mm (1/4") ID to suit APBS409 APBS411 - Male threaded tailpiece 1/4" to suit APGV5002 Order APGV5002 to fit to PurgElite, PurgExtra, QuickPurge and HotPurge Inflatable Tube, Pipe and Pipeline Weld Purging Systems. FAQs 1. Do I have to attach the fittings to the hose myself? No, the hose comes complete with the fittings crimped onto each end. 2. I require a length of hose not shown on the price list, is this possible? Yes, contact us with your desired length and they will quote a price. 3. Is there a maximum length? Yes, 100m is the longest length in a straight run, however longer lengths can be made up with joining connectors. 4. Is the hose stamped with the specification? Yes, each length of hose is marked in white ink along the length with the specification: Argon Gas Hose BS EN 559 20 Bar (300 PSI) WP-MM.ID. 5. Do you keep good stocks? Yes, we have hose and all fittings in stock and lengths can be made up quickly by our assembly team. 6. Can I purchase the fittings separately if required? Yes, all fittings can be bought individually. 7. Does the hose have a British Standard? Yes, it is BS EN 559. 8. What is the temperature resistance range of the hose? From -30C up to +80C. 9. Is the hose just for argon? No, it can also be used for nitrogen. 10. How much does it weigh? 0.16 kgs per metre. 11. What are the dimensions of the hose? The ID is 6 mm and the OD is 13 mm. 12. What is the maximum pressure rating of the hose? Working pressure is 300 psi, 20 bar.

GBP 159.99
1

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 20m

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 20m

Huntingdon Fusion Technique's (HFT) off-the-shelf Argon Feed Hose is available in a variety of standard lengths, including 30m, 25m, 20m, 15m, 10m, and 5m. Each assembly is crafted to meet high-quality standards and comes equipped with an argon regulator fitting on one end and a 12 mm to 12 mm quick connect fitting on the other end. We also offer a range of alternative fittings, such as hose tails, tailpieces, and various quick disconnect options. What's In The Box APBS409 - Coupling, Female Thread 3/8" BSP (to fit cylinder regulator) APBS412 - Hose Tail 6.35 mm (1/4") ID to suit APBS409 APBS411 - Male threaded tailpiece 1/4" to suit APGV5002 Order APGV5002 to fit to PurgElite, PurgExtra, QuickPurge and HotPurge Inflatable Tube, Pipe and Pipeline Weld Purging Systems. FAQs 1. Do I have to attach the fittings to the hose myself? No, the hose comes complete with the fittings crimped onto each end. 2. I require a length of hose not shown on the price list, is this possible? Yes, contact us with your desired length and they will quote a price. 3. Is there a maximum length? Yes, 100m is the longest length in a straight run, however longer lengths can be made up with joining connectors. 4. Is the hose stamped with the specification? Yes, each length of hose is marked in white ink along the length with the specification: Argon Gas Hose BS EN 559 20 Bar (300 PSI) WP-MM.ID. 5. Do you keep good stocks? Yes, we have hose and all fittings in stock and lengths can be made up quickly by our assembly team. 6. Can I purchase the fittings separately if required? Yes, all fittings can be bought individually. 7. Does the hose have a British Standard? Yes, it is BS EN 559. 8. What is the temperature resistance range of the hose? From -30C up to +80C. 9. Is the hose just for argon? No, it can also be used for nitrogen. 10. How much does it weigh? 0.16 kg per metre. 11. What are the dimensions of the hose? The ID is 6 mm and the OD is 13 mm. 12. What is the maximum pressure rating of the hose? Working pressure is 300 psi, 20 bar.

GBP 139.99
1

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 10m

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 10m

Huntingdon Fusion Technique's (HFT) off-the-shelf Argon Feed Hose is available in a variety of standard lengths, including 30m, 25m, 20m, 15m, 10m, and 5m. Each assembly is crafted to meet high-quality standards and comes equipped with an argon regulator fitting on one end and a 12 mm to 12 mm quick connect fitting on the other end. We also offer a range of alternative fittings, such as hose tails, tailpieces, and various quick disconnect options. What's In The Box APBS409 - Coupling, Female Thread 3/8" BSP (to fit cylinder regulator) APBS412 - Hose Tail 6.35 mm (1/4") ID to suit APBS409 APBS411 - Male threaded tailpiece 1/4" to suit APGV5002 Order APGV5002 to fit to PurgElite, PurgExtra, QuickPurge and HotPurge Inflatable Tube, Pipe and Pipeline Weld Purging Systems. FAQs 1. Do I have to attach the fittings to the hose myself? No, the hose comes complete with the fittings crimped onto each end. 2. I require a length of hose not shown on the price list, is this possible? Yes, contact us with your desired length and we will quote a price. 3. Is there a maximum length? Yes, 100m is the longest length in a straight run; however, longer lengths can be made up with joining connectors. 4. Is the hose stamped with the specification? Yes, each length of hose is marked in white ink along the length with the specification: Argon Gas Hose BS EN 559 20 Bar (300 PSI) WP-MM.ID. 5. Do you keep good stocks? Yes, we have hose and all fittings in stock, and lengths can be made up quickly by our assembly team. 6. Can I purchase the fittings separately if required? Yes, all fittings can be bought individually. 7. Does the hose have a British Standard? Yes, it is BS EN 559. 8. What is the temperature resistance range of the hose? From -30C up to +80C. 9. Is the hose just for argon? No, it can also be used for nitrogen. 10. How much does it weigh? 0.16 kgs per metre. 11. What are the dimensions of the hose? The ID is 6 mm and the OD is 13 mm. 12. What is the maximum pressure rating of the hose? Working pressure is 300 psi, 20 bar.

GBP 93.99
1

Huntingdon Fusion Techniques PurgeGate Valves APGV001

Huntingdon Fusion Techniques PurgeGate Valves APGV001

PurgeGate, an innovative one-way valve equipped with a convenient push-fit connection, is the perfect choice for all Inflatable Pipe Weld Purging Systems. These valves are incredibly user-friendly and can be effortlessly interchanged between different systems, providing a cost-effective solution. Benefits PurgeGate is a unique one-way valve designed specifically for Inflatable Pipe Weld Purging Systems. It features an easy push-fit connection, ensuring quick and hassle-free installation. The valves are suitable for all types of inflatable pipe welding applications. They are simple to use, making them accessible for both experienced welders and beginners. PurgeGate valves can be easily swapped from one system to another, offering cost-effective versatility. The valves contribute to efficient and effective purging, enhancing the overall welding process. Their affordability makes them a practical choice for various welding projects. PurgeGate valves help maintain consistent gas flow during the purging process, ensuring high-quality welds. FAQs 1. What is the purpose of the PurgeGate Valve? PurgeGate delivers gas at constant pressure of 0.5 bar and a flow of 7.5 litres/min. Inflatable Tube and Pipe Weld Purging Systems are at risk of overinflating during the weld purging process due to unwanted or incorrect manipulation of gas pressure and flow setting. By using PurgeGate Valves your inflatable purging systems will be safe from bursting due to over-pressurisation. 2. Does PurgeGate come as standard on any of the Pipe Purging Products? PurgeGate is fitted as standard to our QuickPurge and HotPurge Inflatable Tube and Pipe Purging Systems. PurgeGate can be purchased as an accessory to other Inflatable Purging Systems, such as PurgElite. 3. Can PurgeGate be used with other manufactures Purging Products? The PurgeGate Valve is designed to fit onto HFTs PurgElite Inflatable Tube and Pipe Weld Purging Systems. In addition, PurgeGate does fit onto other versions of Inflatable Pipe Purging Systems manufactured elsewhere. 4. What size Weld Purging Systems can PurgeGate be used for? The Valve System can fit all system sizes (1 to 88) and can be moved from one model to another model as required. 5. Are PurgeGate Valves reusable? Yes! These simple plug and play valves can be used time and time again and easily moved from system to system. 6. Which way do I connect my PurgeGate Valve? It is important to connect the PurgeGate in the correct direction with the arrow shown, pointing in the direction of the purge gas flow.

GBP 133.99
1

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 381mm

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 381mm

Huntingdon Fusion Techniques HFT Inflatable Stoppers are designed to swiftly and effortlessly halt gas or liquid flow, prevent debris accumulation, and deter the entry of undesired substances or creatures into pipes and ducts. The adaptable Pipestoppers Inflatable Stoppers are capable of being inserted and retracted through narrow openings, and once inflated, they expand to their maximum size to facilitate stopping operations. Cylindrical Inflatable Stoppers, being longer than their diameter, maintain stability and prevent inversion within a pipe even when subjected to pressure. Spherical Stoppers are utilized in situations where the stopper's position is irrelevant, as they can create a seal regardless of the angle at which they are placed. FAQs 1. How do I know when to choose between a Mechanical and an Inflatable Stopper? HFT Pipestoppers Inflatable Stoppers can be inserted and retracted through holes smaller than the one to be sealed. They are much less expensive than mechanical stoppers, but are not so suitable for applications requiring the ruggedness and strength of a mechanical stopper. 2. How do I prevent the stoppers from being pushed out of the pipe during a pressure test? It is common to brace the ends of pipes to prevent stoppers sliding out. Contact us for further information. 3. Will your stoppers be suitable for use in petrochemical pipework where there are hydrocarbon liquids and gases present? The HFT Pipestoppers Division manufactures special Inflatable Stoppers for the petrochemical industry where long term resistance to chemicals and/or petrochemical oils and vapours is necessary.

GBP 139.99
1

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 305mm

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 305mm

Huntingdon Fusion Techniques HFT Inflatable Stoppers are designed to swiftly and effortlessly halt gas or liquid flow, prevent debris accumulation, and deter the entry of undesired substances or creatures into pipes and ducts. The adaptable Pipestoppers Inflatable Stoppers are capable of being inserted and retracted through narrow openings, and once inflated, they expand to their maximum size to facilitate stopping operations. Cylindrical Inflatable Stoppers, being longer than their diameter, maintain stability and prevent inversion within a pipe even when subjected to pressure. Spherical Stoppers are utilized in situations where the stopper's position is irrelevant, as they can create a seal regardless of the angle at which they are placed. FAQs 1. How do I know when to choose between a Mechanical and an Inflatable Stopper? HFT Pipestoppers Inflatable Stoppers can be inserted and retracted through holes smaller than the one to be sealed. They are much less expensive than mechanical stoppers, but are not so suitable for applications requiring the ruggedness and strength of a mechanical stopper. 2. How do I prevent the stoppers from being pushed out of the pipe during a pressure test? It is common to brace the ends of pipes to prevent stoppers sliding out. Contact us for further information. 3. Will your stoppers be suitable for use in petrochemical pipework where there are hydrocarbon liquids and gases present? The HFT Pipestoppers Division manufactures special Inflatable Stoppers for the petrochemical industry where long term resistance to chemicals and/or petrochemical oils and vapours is necessary.

GBP 89.99
1

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 406mm

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 406mm

Huntingdon Fusion Techniques HFT Inflatable Stoppers are designed to swiftly and effortlessly halt gas or liquid flow, prevent debris accumulation, and deter the entry of undesired substances or creatures into pipes and ducts. The adaptable Pipestoppers Inflatable Stoppers are capable of being inserted and retracted through narrow openings, and once inflated, they expand to their maximum size to facilitate stopping operations. Cylindrical Inflatable Stoppers, being longer than their diameter, maintain stability and prevent inversion within a pipe even when subjected to pressure. Spherical Stoppers are utilized in situations where the stopper's position is irrelevant, as they can create a seal regardless of the angle at which they are placed. FAQs 1. How do I know when to choose between a Mechanical and an Inflatable Stopper? HFT Pipestoppers Inflatable Stoppers can be inserted and retracted through holes smaller than the one to be sealed. They are much less expensive than mechanical stoppers, but are not so suitable for applications requiring the ruggedness and strength of a mechanical stopper. 2. How do I prevent the stoppers from being pushed out of the pipe during a pressure test? It is common to brace the ends of pipes to prevent stoppers sliding out. Contact us for further information. 3. Will your stoppers be suitable for use in petrochemical pipework where there are hydrocarbon liquids and gases present? The HFT Pipestoppers Division manufactures special Inflatable Stoppers for the petrochemical industry where long term resistance to chemicals and/or petrochemical oils and vapours is necessary.

GBP 143.99
1

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 356mm

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 356mm

Huntingdon Fusion Techniques HFT Inflatable Stoppers are designed to swiftly and effortlessly halt gas or liquid flow, prevent debris accumulation, and deter the entry of undesired substances or creatures into pipes and ducts. The adaptable Pipestoppers Inflatable Stoppers are capable of being inserted and retracted through narrow openings, and once inflated, they expand to their maximum size to facilitate stopping operations. Cylindrical Inflatable Stoppers, being longer than their diameter, maintain stability and prevent inversion within a pipe even when subjected to pressure. Spherical Stoppers are utilized in situations where the stopper's position is irrelevant, as they can create a seal regardless of the angle at which they are placed. FAQs 1. How do I know when to choose between a Mechanical and an Inflatable Stopper? HFT Pipestoppers Inflatable Stoppers can be inserted and retracted through holes smaller than the one to be sealed. They are much less expensive than mechanical stoppers, but are not so suitable for applications requiring the ruggedness and strength of a mechanical stopper. 2. How do I prevent the stoppers from being pushed out of the pipe during a pressure test? It is common to brace the ends of pipes to prevent stoppers sliding out. Contact us for further information. 3. Will your stoppers be suitable for use in petrochemical pipework where there are hydrocarbon liquids and gases present? The HFT Pipestoppers Division manufactures special Inflatable Stoppers for the petrochemical industry where long term resistance to chemicals and/or petrochemical oils and vapours is necessary.

GBP 119.99
1

Huntingdon Fusion Techniques Techweld MultiStrike Tungsten Electrodes (10pk) - 3. 2mm X 152mm

Huntingdon Fusion Techniques Techweld MultiStrike Tungsten Electrodes (10pk) - 3. 2mm X 152mm

Huntingdon Fusion Techniques (HFT) MultiStrike Tungsten Electrodes are versatile, providing stable performance for welding steels, alloys (using DC), and aluminum (using AC) within the current range of 0-300 Amps. They outperform conventional 2% thoriated tungsten electrodes by offering up to 10 times the number of arc strikes under the same conditions. These electrodes are non-thoriated, non-radiotoxic, and non-carcinogenic. Additionally, they lower working temperatures, resulting in narrower, lower heat input welds and extending the number of arc strikes before re-grinding is required. Developed with user safety in mind, Techweld MultiStrike Tungsten Electrodes are traceable through batch numbers and come in special packaging. Immediate delivery is available for these electrodes. Pack of 10. FAQs 1. We see and hear that there are other thoria-free "ecological" tungstens available at lower prices than MultiStrikes? The MultiStrike trademark has become an international industry standard. When buying MultiStrike Tungsten Electrodes you are purchasing a consistent, guaranteed, reliable, traceable product which will not vary and let you down in production. Many cheaper tungstens may have unreliable sources. The MultiStrike Tungsten Electrodes tip colour is known as "House Blue," immediately distinguishable from any other tungsten and is part of the Trademark of Huntingdon Fusion Techniques HFT. 2. What is in MultiStrike Tungsten Electrodes to make them so good? MultiStrike Tungsten Electrodes contain a blend of rare earth dopants to replace thoria. Our dopants are not radioactive and they are mixed in accurate proportions using statistical proportional control procedures, fully computerised to ensure that the tungstens are made to the same high standards every time. 3. What materials do you use inside MultiStrike Tungsten Electrodes? The exact ingredients of MultiStrike Tungsten Electrodes are part of our intellectual property gained by extensive research and development to bring a quality product to the market place that is totally traceable, reliable and repeatable. 4. Can MultiStrike Tungsten Electrodes be used to weld aluminum with AC welding? Yes, MultiStrike Tungsten Electrodes are used widely and successfully for welding aluminum. 5. I tried MultiStrike Tungsten Electrodes but I got tungsten inclusion in the weld. Tungsten inclusions can be generated by poor grinding techniques or accidental dipping of a tungsten electrode into the weld pool. Tungsten inclusions can be obtained when using any kind of tungsten electrode. 6. I have tried MultiStrike Tungsten Electrodes but they make my welds dirty. MultiStrike Tungsten Electrodes are used to generate an arc. They cannot make a weld dirty. Dirty welds are produced by either insufficient gas coverage, disturbance of the gas flow or dirty and contaminated material being welded. 7. You said I would get 10 times more arc strikes than a thoriated tungsten, but mine only lasted two welds before I had to re-grind it. MultiStrike Tungsten Electrodes will give ten times better performance than thoriated tungstens under identical conditions. Welding conditions will affect the life of all tungsten electrodes equally. However, if a thoriated tungsten electrode is put onto an automatic machine welding with clean components and it gives 20 arc strikes before it fails, then a MultiStrike Tungsten Electrodes will give 200 arc strikes. 8. Im worried about the dust generated when I grind MultiStrike Tungsten Electrodes. Because MultiStrike Tungsten Electrodes do not contain thoria or any other radiotoxic materials, the dust generated is not carcinogenic. However, any local health and safety standards about the generation and collection of dust should be observed. 9. Is there a classification for MultiStrike as with most other electrodes? MultiStrike Tungsten Electrodes conform to Standards EN ISO 06848 and ANSI/AWS A5 12m-98.

GBP 149.99
1

Huntingdon Fusion Techniques Techweld MultiStrike Tungsten Electrodes (10pk) - 3. 2mm X 178mm

Huntingdon Fusion Techniques Techweld MultiStrike Tungsten Electrodes (10pk) - 3. 2mm X 178mm

Huntingdon Fusion Techniques (HFT) MultiStrike Tungsten Electrodes are versatile, providing stable performance for welding steels, alloys (using DC), and aluminum (using AC) within the current range of 0-300 Amps. They outperform conventional 2% thoriated tungsten electrodes by offering up to 10 times the number of arc strikes under the same conditions. These electrodes are non-thoriated, non-radiotoxic, and non-carcinogenic. Additionally, they lower working temperatures, resulting in narrower, lower heat input welds and extending the number of arc strikes before re-grinding is required. Developed with user safety in mind, Techweld MultiStrike Tungsten Electrodes are traceable through batch numbers and come in special packaging. Immediate delivery is available for these electrodes. Pack of 10. FAQs 1. We see and hear that there are other thoria-free "ecological" tungstens available at lower prices than MultiStrikes? The MultiStrike trademark has become an international industry standard. When buying MultiStrike Tungsten Electrodes you are purchasing a consistent, guaranteed, reliable, traceable product which will not vary and let you down in production. Many cheaper tungstens may have unreliable sources. The MultiStrike Tungsten Electrodes tip colour is known as "House Blue", immediately distinguishable from any other tungsten and is part of the Trademark of Huntingdon Fusion Techniques HFT. 2. What is in MultiStrike Tungsten Electrodes to make them so good? MultiStrike Tungsten Electrodes contain a blend of rare earth dopants to replace thoria. Our dopants are not radioactive and they are mixed in accurate proportions using statistical proportional control procedures, fully computerised to ensure that the tungstens are made to the same high standards every time. 3. What materials do you use inside MultiStrike Tungsten Electrodes? The exact ingredients of MultiStrike Tungsten Electrodes are part of our intellectual property gained by extensive research and development to bring a quality product to the market place that is totally traceable, reliable and repeatable. 4. Can MultiStrike Tungsten Electrodes be used to weld aluminium with AC welding? Yes, MultiStrike Tungsten Electrodes are used widely and successfully for welding aluminium. 5. I tried MultiStrike Tungsten Electrodes but I got tungsten inclusion in the weld. Tungsten inclusions can be generated by poor grinding techniques or accidental dipping of a tungsten electrode into the weld pool. Tungsten inclusions can be obtained when using any kind of tungsten electrode. 6. I have tried MultiStrike Tungsten Electrodes but they make my welds dirty. MultiStrike Tungsten Electrodes are used to generate an arc. They cannot make a weld dirty. Dirty welds are produced by either insufficient gas coverage, disturbance of the gas flow or dirty and contaminated material being welded. 7. You said I would get 10 times more arc strikes than a thoriated tungsten, but mine only lasted two welds before I had to re-grind it. MultiStrike Tungsten Electrodes will give ten times better performance than thoriated tungstens under identical conditions. Welding conditions will affect the life of all tungsten electrodes equally. However, if a thoriated tungsten electrode is put onto an automatic machine welding with clean components and it gives 20 arc strikes before it fails, then a MultiStrike Tungsten Electrodes will give 200 arc strikes. 8. Im worried about the dust generated when I grind MultiStrike Tungsten Electrodes. Because MultiStrike Tungsten Electrodes do not contain thoria or any other radiotoxic materials, the dust generated is not carcinogenic. However, any local health and safety standards about the generation and collection of dust should be observed. 9. Is there a classification for MultiStrike as with most other electrodes? MultiStrike Tungsten Electrodes conform to Standards EN ISO 06848 and ANSI/AWS A5 12m-98.

GBP 162.99
1

Huntingdon Fusion Techniques Techweld MultiStrike Tungsten Electrodes (10pk) - 2. 4mm X 178mm

Huntingdon Fusion Techniques Techweld MultiStrike Tungsten Electrodes (10pk) - 2. 4mm X 178mm

Huntingdon Fusion Techniques (HFT) MultiStrike Tungsten Electrodes are versatile, providing stable performance for welding steels, alloys (using DC), and aluminum (using AC) within the current range of 0-300 Amps. They outperform conventional 2% thoriated tungsten electrodes by offering up to 10 times the number of arc strikes under the same conditions. These electrodes are non-thoriated, non-radiotoxic, and non-carcinogenic. Additionally, they lower working temperatures, resulting in narrower, lower heat input welds and extending the number of arc strikes before re-grinding is required. Developed with user safety in mind, Techweld MultiStrike Tungsten Electrodes are traceable through batch numbers and come in special packaging. Immediate delivery is available for these electrodes. Pack of 10. FAQs 1. We see and hear that there are other thoria-free ecological tungstens available at lower prices than MultiStrikes? The MultiStrike trademark has become an international industry standard. When buying MultiStrike Tungsten Electrodes you are purchasing a consistent, guaranteed, reliable, traceable product which will not vary and let you down in production. Many cheaper tungstens may have unreliable sources. The MultiStrike Tungsten Electrodes tip colour is known as House Blue, immediately distinguishable from any other tungsten and is part of the Trademark of Huntingdon Fusion Techniques HFT. 2. What is in MultiStrike Tungsten Electrodes to make them so good? MultiStrike Tungsten Electrodes contain a blend of rare earth dopants to replace thoria. Our dopants are not radioactive and they are mixed in accurate proportions using statistical proportional control procedures, fully computerised to ensure that the tungstens are made to the same high standards every time. 3. What materials do you use inside MultiStrike Tungsten Electrodes? The exact ingredients of MultiStrike Tungsten Electrodes are part of our intellectual property gained by extensive research and development to bring a quality product to the market place that is totally traceable, reliable, and repeatable. 4. Can MultiStrike Tungsten Electrodes be used to weld aluminum with AC welding? Yes, MultiStrike Tungsten Electrodes are used widely and successfully for welding aluminum. 5. I tried MultiStrike Tungsten Electrodes but I got tungsten inclusion in the weld. Tungsten inclusions can be generated by poor grinding techniques or accidental dipping of a tungsten electrode into the weld pool. Tungsten inclusions can be obtained when using any kind of tungsten electrode. 6. I have tried MultiStrike Tungsten Electrodes but they make my welds dirty. MultiStrike Tungsten Electrodes are used to generate an arc. They cannot make a weld dirty. Dirty welds are produced by either insufficient gas coverage, disturbance of the gas flow, or dirty and contaminated material being welded. 7. You said I would get 10 times more arc strikes than a thoriated tungsten, but mine only lasted two welds before I had to re-grind it. MultiStrike Tungsten Electrodes will give ten times better performance than thoriated tungstens under identical conditions. Welding conditions will affect the life of all tungsten electrodes equally. However, if a thoriated tungsten electrode is put onto an automatic machine welding with clean components and it gives 20 arc strikes before it fails, then a MultiStrike Tungsten Electrodes will give 200 arc strikes. 8. Im worried about the dust generated when I grind MultiStrike Tungsten Electrodes. Because MultiStrike Tungsten Electrodes do not contain thoria or any other radiotoxic materials, the dust generated is not carcinogenic. However, any local health and safety standards about the generation and collection of dust should be observed. 9. Is there a classification for MultiStrike as with most other electrodes? MultiStrike Tungsten Electrodes conform to Standards EN ISO 06848 and ANSI/AWS A5 12m-98.

GBP 99.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 279mm

Huntingdon Fusion Techniques PetroChem Stoppers - 279mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F) . Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F) . 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1,118 mm) . 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F) . 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock? 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 139.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 330mm

Huntingdon Fusion Techniques PetroChem Stoppers - 330mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 159.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 254mm

Huntingdon Fusion Techniques PetroChem Stoppers - 254mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 129.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 203mm

Huntingdon Fusion Techniques PetroChem Stoppers - 203mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1,118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 119.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 127mm

Huntingdon Fusion Techniques PetroChem Stoppers - 127mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F) . Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F) . 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm) . 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F) . 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock? 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 109.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 51mm

Huntingdon Fusion Techniques PetroChem Stoppers - 51mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify your required length, and it can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 104.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 76mm

Huntingdon Fusion Techniques PetroChem Stoppers - 76mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify your required length, and it can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 104.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 102mm

Huntingdon Fusion Techniques PetroChem Stoppers - 102mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F) . Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F) . 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm) . 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F) . 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 109.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 305mm

Huntingdon Fusion Techniques PetroChem Stoppers - 305mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1,118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 139.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 152mm

Huntingdon Fusion Techniques PetroChem Stoppers - 152mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock? 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 109.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 229mm

Huntingdon Fusion Techniques PetroChem Stoppers - 229mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 129.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 356mm

Huntingdon Fusion Techniques PetroChem Stoppers - 356mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1,118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify your required length and it can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 169.99
1