218 results (0,16637 seconds)

Show all filters

Brand

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Huntingdon Fusion Techniques Purgenet Dew Point Purging Gas Moisture Sensor DPS1000

Huntingdon Fusion Techniques Purgenet Dew Point Purging Gas Moisture Sensor DPS1000

The HFT PurgeNet Dew Point Purging Gas Moisture Sensor revolutionises the measurement of the dew point for critical welds, making it incredibly easy. With its seamless integration capability into any of Huntingdon Fusion's high spec PurgEye Weld Purge Monitors, the HFT PurgeNet Dew Point Purging Gas Moisture Sensor eliminates the need for Companies involved in critical joint welding to invest in a separate and costly Dew Point Meter, offering accurate readings down to 1 ppm (with a precision of 10 ppm) . Dew Point Purging Gas Moisture Sensor is suitable for the following types of gases: Argon (Ar) Oxygen (O2) Nitrogen (N2) Hydrogen (H2) Carbon Dioxide (CO2) Features Integration Compatibility: It is designed to seamlessly integrate with high spec PurgEye Weld Purge Monitors, providing a comprehensive solution for measuring both dew point and weld purge parameters. Dew Point Measurement: The sensor is specifically designed for accurate measurement of the dew point, enabling precise assessment of moisture levels in the purging gas during critical welds. Wide Reading Range: It can measure dew points down to 1 ppm, ensuring high sensitivity and enabling precise control of moisture levels. The accuracy of the measurements is rated at 10 ppm. Cost Savings: By eliminating the need to purchase a separate and expensive dew point meter, the HFT PurgeNet Dew Point Purging Gas Moisture Sensor helps companies reduce costs and streamline their welding processes. User-Friendly: The sensor is designed to be user-friendly and easy to operate, simplifying the measurement process for welders and technicians. Reliability: It is built to deliver reliable and consistent results, ensuring that critical welds are performed under optimal conditions with controlled moisture levels. Durability: The sensor is constructed with durable materials to withstand the harsh environments typically encountered during welding operations, ensuring its longevity and performance. Compatibility PurgEye 200 PurgEye 500 Desk PurgEye 600 PurgEye 1000 Remote PurgEye 1500 Site FAQs 1. What is Dew? Dew is expressed as drops of liquid water that condense from the atmosphere and onto any solid surface like metal. 2. What is the Dew Point? The dew point is the temperature in C or F at which air is saturated with water vapour (also referred to as humidity) Below the dew point, water will begin to condense on solid surfaces in the welding environment. 3. How does water moisture affect the quality of the weld joint? Under arc conditions, water is broken down into hydrogen and oxygen in atomic form which, when present in weld metal, cause porosity and are known to create cracking in the weld joint. 4. Why should I use a Dew Point Purging Gas Moisture Sensor? Using the PurgeNet Dew Point Purging Gas Moisture Sensor while welding is the easiest method for indicating when water will condense on solid surfaces in the welding zone. Water can form as moisture on metal surfaces while welding and it is important to be able to measure Dew Point while welding lengthy critical joints as conditions can change during the welding process. 5. How does the Dew Point Purging Gas Moisture Sensor give readings? The PurgEye Dew Point Sensor accessory has been designed to integrate with most of the Argweld Weld Purge Monitors via the PurgeNet lead that is supplied with them, thereby giving values and water present on the same screen. In this way, the user is not forced into the purchase of an expensive, separate Dew Point Monitor that will give its reading elsewhere. 6. Which Weld Purge Monitors are compatible with the Dew Point Purging Gas Moisture Sensor? The PurgeNet Dew Point Purging Gas Moisture Sensor is compatible with the PurgEye 200, 500 Desk, 600, 1000 Remote and 1500 Site.

GBP 4299.99
1

Huntingdon Fusion Techniques Argweld Weld Trailing Shields - ATS300

Huntingdon Fusion Techniques Argweld Weld Trailing Shields - ATS300

The Argweld Weld Trailing Shields offer several benefits, including faster welding, cost savings, and the production of high-quality welds. These shields are designed with a stainless steel mesh body that allows argon gas to be evenly diffused without turbulence. Replaceable silicone rubber side shields prevent argon from escaping sideways, ensuring a continuous gas shield over the weld metal. This shield remains in place until the welded metal has cooled below its oxidation temperature. The Argweld Weld Trailing Shields are reusable and can withstand temperatures up to 230C. They eliminate the need for expensive purge chambers, reduce re-work, and enable faster welding. They are suitable for welding a variety of metals, including titanium, zirconium, nickel, cobalt alloys, stainless and duplex steels, and other reactive metals. These shields save costs by minimizing re-work and gas usage, avoiding rejected welds caused by oxidation. They are available in flat models for sheet or plate work and profiled models for welding internal and external pipes, vessels, and tanks. When using Argweld Weld Trailing Shields, welds retain their brightness and shine without discoloration or oxidation, even at higher welding speeds. These shields are readily available for most popular sizes of pipes and vessels. Features - Sleek design and a unique torch holder for easy interchangeability of shield sizes without changing the welding torch. - For right and left-handed use. - Compatible with TIG, MIG, or Plasma welding torches. - Provide excellent gas coverage when welding titanium, zirconium, cobalt alloys, duplex steels, stainless steels, and other reactive metals. - Profiled shields are tailored to specific pipe, tube, vessel, or tank diameters. - Flat shields available for plate, sheet, rectangular tanks, and fabrications. - Suitable for both manual and machine-mounted torches, enabling faster welding with a reliable gas shield. - Each shield undergoes testing to ensure perfect gas coverage, smooth movement, and no leaks. - Manufactured in the UK according to European Standards and Quality Control Procedures. Benefits - Reduced gas consumption - Avoidance of re-work - Elimination of wasted material costs - Prevention of rejected welds due to oxidation. FAQs 1. What are the benefits of using an Argweld Weld Trailing Shields? There are several reasons, some of which are: A. The chance of a weld defect is dramatically reduced due to the wide gas coverage held over the weld for a longer period during welding, while the heated metal is cooling below the oxidation temperature. B. Welds are finished in a bright and shiny condition, minimizing or eliminating post weld grinding and cleaning. C. The heat affected zones of a weld are left clean when using an Argweld Weld Trailing Shields because of the extra wide gas coverage. D. Welders can weld faster because of the extra time that the weld remains covered with inert gas when using an Argweld Weld Trailing Shields. E. Significant reduction of manufacturing costs due to the reduction of post weld cleaning and the reduction of defects when using an Argweld Weld Trailing Shields. 2. Can I use Argweld Weld Trailing Shields for stainless steel as well as titanium and zirconium? Yes, Argweld Weld Trailing Shields are extremely valuable for all stainless steel, duplex steel and other alloy steel as well as titanium, zirconium and all of the nickel and cobalt alloys. 3. Can I buy an Argweld Weld Trailing Shield which is longer or wider? Yes. Argweld Weld Trailing Shields are designed for two methods of use: A. For manual welding where they are light in weight and easy to manipulate by the manual welder when he has an Argweld Weld Trailing Shield attached to his welding torch. B. For automatic welding machines. For automatic welding machines, where weight and size is less of a concern, Argweld Weld Trailing Shields are available in longer and wider dimensions to allow for much faster welding speeds and much hotter welds where greater gas coverage is necessary for obtaining clean defect free welds. 4. Can Argweld Weld Trailing Shields be used on any welding torch? Argweld Weld Trailing Shields are designed and delivered with a universal worm drive circular clip that will open and close around any shield gas nozzle on any TIG (GTAW), MIG (GMAW) or Plasma (PAW) manual or machine torch. 5. Can I weld flat sheet and plate with Argweld Weld Trailing Shields? Yes, one of the Argweld products is a flat Argweld Weld Trailing Shields which is available as an accessory for manual welding torches and another flat version for machine mounted welding torches. 6. Can I weld on the outside of pipes and vessels with Argweld Weld Trailing Shields? Yes, Argweld Weld Trailing Shields are kept in stock for most popular sizes of pipes and vessels. Simply tell us the diameter of your pipe or vessel and we will provide an exact match. 7. Can I weld on the inside of pipes and vessels with Argweld

GBP 499.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 584mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 584mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 759.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 533mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 533mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 699.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 457mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 457mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 619.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 559mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 559mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 729.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 508mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 508mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 699.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 406mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 406mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 529.99
1

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 356mm

Huntingdon Fusion Techniques PurgElite Inflatable Tube & Pipe Weld Purging System - 356mm

Argweld PurgElite Inflatable Tube and Pipe Weld Purging Systems incorporates cutting-edge scientific breakthroughs in purge bladder technology. A groundbreaking 'New' 1-inch (25mm) system has revolutionised the market by catering to small diameter tubes and pipes. This remarkable innovation not only aids welders in saving valuable time, money, and gas but also ensures superior weld quality. By minimising the volume to be purged, both the time spent and the cost of inert gas are significantly reduced. Our purge bladders and dams are meticulously designed to facilitate high-quality, pristine tube and pipe weld purging, accommodating diameters ranging from 1 to 24 inches (25 to 610 mm) For comprehensive technical details, kindly refer to the tabs provided above.Benefits Efficient purging for high-quality welds Time and cost savings due to reduced gas usage Improved weld quality and minimised defects Versatile sizing options for different diameter tubes and pipes Incorporation of advanced purge bladder technology Simplified technical information for ease of use.The maximum operating temperature is 80?C (176F) for the inflatable dams. For pre-heated pipes, refer to our HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels.

GBP 439.99
1

Huntingdon Fusion Techniques PurgEye 1000 Remote Weld Purge Monitor API1000

Huntingdon Fusion Techniques PurgEye 1000 Remote Weld Purge Monitor API1000

The PurgEye 1000 Remote Weld Purge Monitor Oxygen Gas Analyser is a solution developed by HFT for measuring oxygen levels during welding processes in long tube lines or pipeline sections, where it may be impractical to measure the purge gas exhaust close to the weld. By fitting a sensing head directly at the weld location, the monitor can measure the oxygen level in the purge gas and transmit the information electronically to a remote monitor and operator located up to 1 km away. This ensures accurate weld purge readings and prevents adverse effects from oxidation. The portable monitor has a range from 1000 ppm down to 1 ppm, with an accuracy of 10 ppm, and the stainless steel sensing head can be easily manoeuvered through pipes as small as 1" (25 mm) in diameter. Benefits Accurate measurement of oxygen levels in weld purge gas down to 10 ppm (parts per million) Ability to measure purge gas exhaust up to 1 km away from the weld location Avoids the drawbacks of measuring oxygen levels in the joint gap, where outside oxygen and variable factors can affect accuracy Ensures correct weld purge readings and prevents adverse effects of oxidation on the joint Portable and compact design for easy handling and manoeuverability Equipped with a stainless steel sensing head that connects to various tube, pipe, and pipeline Weld Purging Systems Only requires one cable for power and data transmission Suitable for pipes with a diameter as small as 1" (25 mm) Provides real-time readings on an easily readable display Supports data logging for quality control and compliance purposes. What's In The Box PurgeNet Smart Cable for transferring Weld Purge Data PurgeLog Data Logging Software (USB Data Stick) Docking station Sample tube set with filter Sturdy protective storage carrying and presentation case (a spare/replacement case is available for purchase) Calibration Certificate (valid for 12 months) User Instruction Manual Mains power lead or cable with international plug adaptors FAQs 1. What sort of sensor is used in the Argweld PurgEye 1000 'Remote' Weld Purge Monitor. The Argweld PurgEye 1000 Remote Weld Purge Monitor uses a solid state sensor of a unique design. It is much lower in cost than other sensors, has a faster reaction time than other sensors and has a long life. 2. What is the intended application for the Argweld PurgEye 1000 Remote Weld Purge Monitor? The Argweld PurgEye 1000 Remote Weld Purge Monitor allows the sensing head to be placed up to 1km away from the instrument so that readings from inside a pipeline or pipe fabrication can be taken directly at the joint. 3. Is the Argweld PurgEye 1000 Remote Weld Purge Monitor sensitive to electrical disturbances? Each instrument has shielding to prevent most forms of interference. Quality Control Test and Inspection criteria are designed to account for as many variables as possible. It is extremely rare that electrical interference will affect the monitor. 4. My Company needs a Calibration Certificate once a year for all instruments. How do I obtain one? Huntingdon Fusion Techniques HFT has a recalibration facility. 5. What is the minimum pipe size in which the sensor head can be used? 1 (25 mm) diameter) . 6. What is the sensor head housing made from? Stainless steel. 7. Do I need to fix the sensing head to the purging system? Huntingdon Fusion Techniques HFT can supply fixtures for the head to be mounted in a stable fashion to any kind of mechanical or inflatable pipe purging system. 8. What is inside the sensor head? The sensor head contains an electro-mechanical pump to ensure a steady flow of exhaust gas across the sensor for stable measurement purposes. 9. Can Weld Purge Monitors only be used when purging with argon? The PurgEye Weld Purge Monitors measure the oxygen level within any gas, not only inert gases. They can be used to monitor the oxygen level when using inert gases such as argon and helium and also non-inert gases including nitrogen and nitrogen/hydrogen mixes 10. What is PurgeNet? PurgeNet controls the welding power sources such as orbital welders and any other automatic welding systems to switch on and off according to oxygen levels, transferring data easily with the ability to link to external devices.wd_hide_on_desktop="no" wd_hide_on_tablet="no" wd_hide_on_mobile="no"\)

GBP 4699.99
1

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 1067mm

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 1067mm

Argweld Inflatable Weld Pipe Purging Dams offer an affordable alternative to the labour-intensive practice of handcrafting plastic foam or cardboard dams on-site. These innovative dams are made from advanced materials with low outgassing rates, making them ideal for applications where Argweld Tandem Pipe Purging Systems or traditional Purge Bladder Systems may not be suitable.The Argweld Inflatable Weld Purge Dams are incredibly user-friendly and can be effortlessly inserted into the piping system. They are available in a wide range of diameters, allowing for seamless integration with other dam styles or sizes used elsewhere in the piping system.By investing in Argweld Inflatable Weld Pipe Purging Dams, welders can eliminate the need for expensive and time-consuming manual dam construction. These dams provide a cost-effective solution while maintaining high-quality standards, making them a preferred choice for welders looking to optimize their purging processes.BenefitsSingle Ended Dams are designed for closing welds and joints where a Tandem Pipe Purging System is not required.They are ideal for tight bends, T-piece joints, dome end connections, and similar applications.These dams provide an excellent grip within the pipe and ensure a reliable all-around seal.Each dam is equipped with a weld purge gas inflation hose, an exhaust port for purge gas exit, and an additional hose for extra gas input, allowing for faster purging and achieving interpass temperature specifications for weld cooling.The dams facilitate the attainment of a zero colour (non-oxidised) weld, ensuring high-quality results.An additional hose is available for attaching a Weld Purge Monitor, enhancing control and monitoring of the welding process.Single Ended Dams are quick, fast, and extremely simple to use, facilitating efficient installation.Argweld is a recognised trademark in the industry, and their family of products aims to help achieve better welds while saving costs.

GBP 749.99
1

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 610mm

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 610mm

Argweld Inflatable Weld Pipe Purging Dams offer an affordable alternative to the labour-intensive practice of handcrafting plastic foam or cardboard dams on-site. These innovative dams are made from advanced materials with low outgassing rates, making them ideal for applications where Argweld Tandem Pipe Purging Systems or traditional Purge Bladder Systems may not be suitable.The Argweld Inflatable Weld Purge Dams are incredibly user-friendly and can be effortlessly inserted into the piping system. They are available in a wide range of diameters, allowing for seamless integration with other dam styles or sizes used elsewhere in the piping system.By investing in Argweld Inflatable Weld Pipe Purging Dams, welders can eliminate the need for expensive and time-consuming manual dam construction. These dams provide a cost-effective solution while maintaining high-quality standards, making them a preferred choice for welders looking to optimize their purging processes.BenefitsSingle Ended Dams are designed for closing welds and joints where a Tandem Pipe Purging System is not required.They are ideal for tight bends, T-piece joints, dome end connections, and similar applications.These dams provide an excellent grip within the pipe and ensure a reliable all-around seal.Each dam is equipped with a weld purge gas inflation hose, an exhaust port for purge gas exit, and an additional hose for extra gas input, allowing for faster purging and achieving interpass temperature specifications for weld cooling.The dams facilitate the attainment of a zero colour (non-oxidised) weld, ensuring high-quality results.An additional hose is available for attaching a Weld Purge Monitor, enhancing control and monitoring of the welding process.Single Ended Dams are quick, fast, and extremely simple to use, facilitating efficient installation.Argweld is a recognised trademark in the industry, and their family of products aims to help achieve better welds while saving costs.

GBP 469.99
1

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 1422mm

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 1422mm

Argweld Inflatable Weld Pipe Purging Dams offer an affordable alternative to the labour-intensive practice of handcrafting plastic foam or cardboard dams on-site. These innovative dams are made from advanced materials with low outgassing rates, making them ideal for applications where Argweld Tandem Pipe Purging Systems or traditional Purge Bladder Systems may not be suitable.The Argweld Inflatable Weld Purge Dams are incredibly user-friendly and can be effortlessly inserted into the piping system. They are available in a wide range of diameters, allowing for seamless integration with other dam styles or sizes used elsewhere in the piping system.By investing in Argweld Inflatable Weld Pipe Purging Dams, welders can eliminate the need for expensive and time-consuming manual dam construction. These dams provide a cost-effective solution while maintaining high-quality standards, making them a preferred choice for welders looking to optimize their purging processes.BenefitsSingle Ended Dams are designed for closing welds and joints where a Tandem Pipe Purging System is not required.They are ideal for tight bends, T-piece joints, dome end connections, and similar applications.These dams provide an excellent grip within the pipe and ensure a reliable all-around seal.Each dam is equipped with a weld purge gas inflation hose, an exhaust port for purge gas exit, and an additional hose for extra gas input, allowing for faster purging and achieving interpass temperature specifications for weld cooling.The dams facilitate the attainment of a zero colour (non-oxidised) weld, ensuring high-quality results.An additional hose is available for attaching a Weld Purge Monitor, enhancing control and monitoring of the welding process.Single Ended Dams are quick, fast, and extremely simple to use, facilitating efficient installation.Argweld is a recognised trademark in the industry, and their family of products aims to help achieve better welds while saving costs.

GBP 999.99
1

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 1016mm

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 1016mm

Argweld Inflatable Weld Pipe Purging Dams offer an affordable alternative to the labour-intensive practice of handcrafting plastic foam or cardboard dams on-site. These innovative dams are made from advanced materials with low outgassing rates, making them ideal for applications where Argweld Tandem Pipe Purging Systems or traditional Purge Bladder Systems may not be suitable.The Argweld Inflatable Weld Purge Dams are incredibly user-friendly and can be effortlessly inserted into the piping system. They are available in a wide range of diameters, allowing for seamless integration with other dam styles or sizes used elsewhere in the piping system.By investing in Argweld Inflatable Weld Pipe Purging Dams, welders can eliminate the need for expensive and time-consuming manual dam construction. These dams provide a cost-effective solution while maintaining high-quality standards, making them a preferred choice for welders looking to optimize their purging processes.BenefitsSingle Ended Dams are designed for closing welds and joints where a Tandem Pipe Purging System is not required.They are ideal for tight bends, T-piece joints, dome end connections, and similar applications.These dams provide an excellent grip within the pipe and ensure a reliable all-around seal.Each dam is equipped with a weld purge gas inflation hose, an exhaust port for purge gas exit, and an additional hose for extra gas input, allowing for faster purging and achieving interpass temperature specifications for weld cooling.The dams facilitate the attainment of a zero colour (non-oxidised) weld, ensuring high-quality results.An additional hose is available for attaching a Weld Purge Monitor, enhancing control and monitoring of the welding process.Single Ended Dams are quick, fast, and extremely simple to use, facilitating efficient installation.Argweld is a recognised trademark in the industry, and their family of products aims to help achieve better welds while saving costs.

GBP 699.99
1

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 1448mm

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 1448mm

Argweld Inflatable Weld Pipe Purging Dams offer an affordable alternative to the labour-intensive practice of handcrafting plastic foam or cardboard dams on-site. These innovative dams are made from advanced materials with low outgassing rates, making them ideal for applications where Argweld Tandem Pipe Purging Systems or traditional Purge Bladder Systems may not be suitable.The Argweld Inflatable Weld Purge Dams are incredibly user-friendly and can be effortlessly inserted into the piping system. They are available in a wide range of diameters, allowing for seamless integration with other dam styles or sizes used elsewhere in the piping system.By investing in Argweld Inflatable Weld Pipe Purging Dams, welders can eliminate the need for expensive and time-consuming manual dam construction. These dams provide a cost-effective solution while maintaining high-quality standards, making them a preferred choice for welders looking to optimize their purging processes.BenefitsSingle Ended Dams are designed for closing welds and joints where a Tandem Pipe Purging System is not required.They are ideal for tight bends, T-piece joints, dome end connections, and similar applications.These dams provide an excellent grip within the pipe and ensure a reliable all-around seal.Each dam is equipped with a weld purge gas inflation hose, an exhaust port for purge gas exit, and an additional hose for extra gas input, allowing for faster purging and achieving interpass temperature specifications for weld cooling.The dams facilitate the attainment of a zero colour (non-oxidised) weld, ensuring high-quality results.An additional hose is available for attaching a Weld Purge Monitor, enhancing control and monitoring of the welding process.Single Ended Dams are quick, fast, and extremely simple to use, facilitating efficient installation.Argweld is a recognised trademark in the industry, and their family of products aims to help achieve better welds while saving costs.

GBP 999.99
1

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 1397mm

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 1397mm

Argweld Inflatable Weld Pipe Purging Dams offer an affordable alternative to the labour-intensive practice of handcrafting plastic foam or cardboard dams on-site. These innovative dams are made from advanced materials with low outgassing rates, making them ideal for applications where Argweld Tandem Pipe Purging Systems or traditional Purge Bladder Systems may not be suitable.The Argweld Inflatable Weld Purge Dams are incredibly user-friendly and can be effortlessly inserted into the piping system. They are available in a wide range of diameters, allowing for seamless integration with other dam styles or sizes used elsewhere in the piping system.By investing in Argweld Inflatable Weld Pipe Purging Dams, welders can eliminate the need for expensive and time-consuming manual dam construction. These dams provide a cost-effective solution while maintaining high-quality standards, making them a preferred choice for welders looking to optimize their purging processes.BenefitsSingle Ended Dams are designed for closing welds and joints where a Tandem Pipe Purging System is not required.They are ideal for tight bends, T-piece joints, dome end connections, and similar applications.These dams provide an excellent grip within the pipe and ensure a reliable all-around seal.Each dam is equipped with a weld purge gas inflation hose, an exhaust port for purge gas exit, and an additional hose for extra gas input, allowing for faster purging and achieving interpass temperature specifications for weld cooling.The dams facilitate the attainment of a zero colour (non-oxidised) weld, ensuring high-quality results.An additional hose is available for attaching a Weld Purge Monitor, enhancing control and monitoring of the welding process.Single Ended Dams are quick, fast, and extremely simple to use, facilitating efficient installation.Argweld is a recognised trademark in the industry, and their family of products aims to help achieve better welds while saving costs.

GBP 939.99
1

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 1499mm

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 1499mm

Argweld Inflatable Weld Pipe Purging Dams offer an affordable alternative to the labour-intensive practice of handcrafting plastic foam or cardboard dams on-site. These innovative dams are made from advanced materials with low outgassing rates, making them ideal for applications where Argweld Tandem Pipe Purging Systems or traditional Purge Bladder Systems may not be suitable.The Argweld Inflatable Weld Purge Dams are incredibly user-friendly and can be effortlessly inserted into the piping system. They are available in a wide range of diameters, allowing for seamless integration with other dam styles or sizes used elsewhere in the piping system.By investing in Argweld Inflatable Weld Pipe Purging Dams, welders can eliminate the need for expensive and time-consuming manual dam construction. These dams provide a cost-effective solution while maintaining high-quality standards, making them a preferred choice for welders looking to optimize their purging processes.BenefitsSingle Ended Dams are designed for closing welds and joints where a Tandem Pipe Purging System is not required.They are ideal for tight bends, T-piece joints, dome end connections, and similar applications.These dams provide an excellent grip within the pipe and ensure a reliable all-around seal.Each dam is equipped with a weld purge gas inflation hose, an exhaust port for purge gas exit, and an additional hose for extra gas input, allowing for faster purging and achieving interpass temperature specifications for weld cooling.The dams facilitate the attainment of a zero colour (non-oxidised) weld, ensuring high-quality results.An additional hose is available for attaching a Weld Purge Monitor, enhancing control and monitoring of the welding process.Single Ended Dams are quick, fast, and extremely simple to use, facilitating efficient installation.Argweld is a recognised trademark in the industry, and their family of products aims to help achieve better welds while saving costs.

GBP 999.99
1

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 787mm

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 787mm

Argweld Inflatable Weld Pipe Purging Dams offer an affordable alternative to the labour-intensive practice of handcrafting plastic foam or cardboard dams on-site. These innovative dams are made from advanced materials with low outgassing rates, making them ideal for applications where Argweld Tandem Pipe Purging Systems or traditional Purge Bladder Systems may not be suitable.The Argweld Inflatable Weld Purge Dams are incredibly user-friendly and can be effortlessly inserted into the piping system. They are available in a wide range of diameters, allowing for seamless integration with other dam styles or sizes used elsewhere in the piping system.By investing in Argweld Inflatable Weld Pipe Purging Dams, welders can eliminate the need for expensive and time-consuming manual dam construction. These dams provide a cost-effective solution while maintaining high-quality standards, making them a preferred choice for welders looking to optimize their purging processes.BenefitsSingle Ended Dams are designed for closing welds and joints where a Tandem Pipe Purging System is not required.They are ideal for tight bends, T-piece joints, dome end connections, and similar applications.These dams provide an excellent grip within the pipe and ensure a reliable all-around seal.Each dam is equipped with a weld purge gas inflation hose, an exhaust port for purge gas exit, and an additional hose for extra gas input, allowing for faster purging and achieving interpass temperature specifications for weld cooling.The dams facilitate the attainment of a zero colour (non-oxidised) weld, ensuring high-quality results.An additional hose is available for attaching a Weld Purge Monitor, enhancing control and monitoring of the welding process.Single Ended Dams are quick, fast, and extremely simple to use, facilitating efficient installation.Argweld is a recognised trademark in the industry, and their family of products aims to help achieve better welds while saving costs.

GBP 499.99
1

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 864mm

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 864mm

Argweld Inflatable Weld Pipe Purging Dams offer an affordable alternative to the labour-intensive practice of handcrafting plastic foam or cardboard dams on-site. These innovative dams are made from advanced materials with low outgassing rates, making them ideal for applications where Argweld Tandem Pipe Purging Systems or traditional Purge Bladder Systems may not be suitable.The Argweld Inflatable Weld Purge Dams are incredibly user-friendly and can be effortlessly inserted into the piping system. They are available in a wide range of diameters, allowing for seamless integration with other dam styles or sizes used elsewhere in the piping system.By investing in Argweld Inflatable Weld Pipe Purging Dams, welders can eliminate the need for expensive and time-consuming manual dam construction. These dams provide a cost-effective solution while maintaining high-quality standards, making them a preferred choice for welders looking to optimize their purging processes.BenefitsSingle Ended Dams are designed for closing welds and joints where a Tandem Pipe Purging System is not required.They are ideal for tight bends, T-piece joints, dome end connections, and similar applications.These dams provide an excellent grip within the pipe and ensure a reliable all-around seal.Each dam is equipped with a weld purge gas inflation hose, an exhaust port for purge gas exit, and an additional hose for extra gas input, allowing for faster purging and achieving interpass temperature specifications for weld cooling.The dams facilitate the attainment of a zero colour (non-oxidised) weld, ensuring high-quality results.An additional hose is available for attaching a Weld Purge Monitor, enhancing control and monitoring of the welding process.Single Ended Dams are quick, fast, and extremely simple to use, facilitating efficient installation.Argweld is a recognised trademark in the industry, and their family of products aims to help achieve better welds while saving costs.

GBP 529.99
1

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 1168mm

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 1168mm

Argweld Inflatable Weld Pipe Purging Dams offer an affordable alternative to the labour-intensive practice of handcrafting plastic foam or cardboard dams on-site. These innovative dams are made from advanced materials with low outgassing rates, making them ideal for applications where Argweld Tandem Pipe Purging Systems or traditional Purge Bladder Systems may not be suitable.The Argweld Inflatable Weld Purge Dams are incredibly user-friendly and can be effortlessly inserted into the piping system. They are available in a wide range of diameters, allowing for seamless integration with other dam styles or sizes used elsewhere in the piping system.By investing in Argweld Inflatable Weld Pipe Purging Dams, welders can eliminate the need for expensive and time-consuming manual dam construction. These dams provide a cost-effective solution while maintaining high-quality standards, making them a preferred choice for welders looking to optimize their purging processes.BenefitsSingle Ended Dams are designed for closing welds and joints where a Tandem Pipe Purging System is not required.They are ideal for tight bends, T-piece joints, dome end connections, and similar applications.These dams provide an excellent grip within the pipe and ensure a reliable all-around seal.Each dam is equipped with a weld purge gas inflation hose, an exhaust port for purge gas exit, and an additional hose for extra gas input, allowing for faster purging and achieving interpass temperature specifications for weld cooling.The dams facilitate the attainment of a zero colour (non-oxidised) weld, ensuring high-quality results.An additional hose is available for attaching a Weld Purge Monitor, enhancing control and monitoring of the welding process.Single Ended Dams are quick, fast, and extremely simple to use, facilitating efficient installation.Argweld is a recognised trademark in the industry, and their family of products aims to help achieve better welds while saving costs.

GBP 799.99
1

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 1295mm

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 1295mm

Argweld Inflatable Weld Pipe Purging Dams offer an affordable alternative to the labour-intensive practice of handcrafting plastic foam or cardboard dams on-site. These innovative dams are made from advanced materials with low outgassing rates, making them ideal for applications where Argweld Tandem Pipe Purging Systems or traditional Purge Bladder Systems may not be suitable.The Argweld Inflatable Weld Purge Dams are incredibly user-friendly and can be effortlessly inserted into the piping system. They are available in a wide range of diameters, allowing for seamless integration with other dam styles or sizes used elsewhere in the piping system.By investing in Argweld Inflatable Weld Pipe Purging Dams, welders can eliminate the need for expensive and time-consuming manual dam construction. These dams provide a cost-effective solution while maintaining high-quality standards, making them a preferred choice for welders looking to optimize their purging processes.BenefitsSingle Ended Dams are designed for closing welds and joints where a Tandem Pipe Purging System is not required.They are ideal for tight bends, T-piece joints, dome end connections, and similar applications.These dams provide an excellent grip within the pipe and ensure a reliable all-around seal.Each dam is equipped with a weld purge gas inflation hose, an exhaust port for purge gas exit, and an additional hose for extra gas input, allowing for faster purging and achieving interpass temperature specifications for weld cooling.The dams facilitate the attainment of a zero colour (non-oxidised) weld, ensuring high-quality results.An additional hose is available for attaching a Weld Purge Monitor, enhancing control and monitoring of the welding process.Single Ended Dams are quick, fast, and extremely simple to use, facilitating efficient installation.Argweld is a recognised trademark in the industry, and their family of products aims to help achieve better welds while saving costs.

GBP 839.99
1

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 737mm

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 737mm

Argweld Inflatable Weld Pipe Purging Dams offer an affordable alternative to the labour-intensive practice of handcrafting plastic foam or cardboard dams on-site. These innovative dams are made from advanced materials with low outgassing rates, making them ideal for applications where Argweld Tandem Pipe Purging Systems or traditional Purge Bladder Systems may not be suitable.The Argweld Inflatable Weld Purge Dams are incredibly user-friendly and can be effortlessly inserted into the piping system. They are available in a wide range of diameters, allowing for seamless integration with other dam styles or sizes used elsewhere in the piping system.By investing in Argweld Inflatable Weld Pipe Purging Dams, welders can eliminate the need for expensive and time-consuming manual dam construction. These dams provide a cost-effective solution while maintaining high-quality standards, making them a preferred choice for welders looking to optimize their purging processes.BenefitsSingle Ended Dams are designed for closing welds and joints where a Tandem Pipe Purging System is not required.They are ideal for tight bends, T-piece joints, dome end connections, and similar applications.These dams provide an excellent grip within the pipe and ensure a reliable all-around seal.Each dam is equipped with a weld purge gas inflation hose, an exhaust port for purge gas exit, and an additional hose for extra gas input, allowing for faster purging and achieving interpass temperature specifications for weld cooling.The dams facilitate the attainment of a zero colour (non-oxidised) weld, ensuring high-quality results.An additional hose is available for attaching a Weld Purge Monitor, enhancing control and monitoring of the welding process.Single Ended Dams are quick, fast, and extremely simple to use, facilitating efficient installation.Argweld is a recognised trademark in the industry, and their family of products aims to help achieve better welds while saving costs.

GBP 499.99
1

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 1626mm

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 1626mm

Argweld Inflatable Weld Pipe Purging Dams offer an affordable alternative to the labour-intensive practice of handcrafting plastic foam or cardboard dams on-site. These innovative dams are made from advanced materials with low outgassing rates, making them ideal for applications where Argweld Tandem Pipe Purging Systems or traditional Purge Bladder Systems may not be suitable.The Argweld Inflatable Weld Purge Dams are incredibly user-friendly and can be effortlessly inserted into the piping system. They are available in a wide range of diameters, allowing for seamless integration with other dam styles or sizes used elsewhere in the piping system.By investing in Argweld Inflatable Weld Pipe Purging Dams, welders can eliminate the need for expensive and time-consuming manual dam construction. These dams provide a cost-effective solution while maintaining high-quality standards, making them a preferred choice for welders looking to optimize their purging processes.BenefitsSingle Ended Dams are designed for closing welds and joints where a Tandem Pipe Purging System is not required.They are ideal for tight bends, T-piece joints, dome end connections, and similar applications.These dams provide an excellent grip within the pipe and ensure a reliable all-around seal.Each dam is equipped with a weld purge gas inflation hose, an exhaust port for purge gas exit, and an additional hose for extra gas input, allowing for faster purging and achieving interpass temperature specifications for weld cooling.The dams facilitate the attainment of a zero colour (non-oxidised) weld, ensuring high-quality results.An additional hose is available for attaching a Weld Purge Monitor, enhancing control and monitoring of the welding process.Single Ended Dams are quick, fast, and extremely simple to use, facilitating efficient installation.Argweld is a recognised trademark in the industry, and their family of products aims to help achieve better welds while saving costs.

GBP 1099.99
1

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 508mm

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 508mm

Argweld Inflatable Weld Pipe Purging Dams offer an affordable alternative to the labour-intensive practice of handcrafting plastic foam or cardboard dams on-site. These innovative dams are made from advanced materials with low outgassing rates, making them ideal for applications where Argweld Tandem Pipe Purging Systems or traditional Purge Bladder Systems may not be suitable.The Argweld Inflatable Weld Purge Dams are incredibly user-friendly and can be effortlessly inserted into the piping system. They are available in a wide range of diameters, allowing for seamless integration with other dam styles or sizes used elsewhere in the piping system.By investing in Argweld Inflatable Weld Pipe Purging Dams, welders can eliminate the need for expensive and time-consuming manual dam construction. These dams provide a cost-effective solution while maintaining high-quality standards, making them a preferred choice for welders looking to optimize their purging processes.BenefitsSingle Ended Dams are designed for closing welds and joints where a Tandem Pipe Purging System is not required.They are ideal for tight bends, T-piece joints, dome end connections, and similar applications.These dams provide an excellent grip within the pipe and ensure a reliable all-around seal.Each dam is equipped with a weld purge gas inflation hose, an exhaust port for purge gas exit, and an additional hose for extra gas input, allowing for faster purging and achieving interpass temperature specifications for weld cooling.The dams facilitate the attainment of a zero colour (non-oxidised) weld, ensuring high-quality results.An additional hose is available for attaching a Weld Purge Monitor, enhancing control and monitoring of the welding process.Single Ended Dams are quick, fast, and extremely simple to use, facilitating efficient installation.Argweld is a recognised trademark in the industry, and their family of products aims to help achieve better welds while saving costs.

GBP 449.99
1

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 762mm

Huntingdon Fusion Techniques Argweld Single Inflatable Weld Purge Dams - 762mm

Argweld Inflatable Weld Pipe Purging Dams offer an affordable alternative to the labour-intensive practice of handcrafting plastic foam or cardboard dams on-site. These innovative dams are made from advanced materials with low outgassing rates, making them ideal for applications where Argweld Tandem Pipe Purging Systems or traditional Purge Bladder Systems may not be suitable.The Argweld Inflatable Weld Purge Dams are incredibly user-friendly and can be effortlessly inserted into the piping system. They are available in a wide range of diameters, allowing for seamless integration with other dam styles or sizes used elsewhere in the piping system.By investing in Argweld Inflatable Weld Pipe Purging Dams, welders can eliminate the need for expensive and time-consuming manual dam construction. These dams provide a cost-effective solution while maintaining high-quality standards, making them a preferred choice for welders looking to optimize their purging processes.BenefitsSingle Ended Dams are designed for closing welds and joints where a Tandem Pipe Purging System is not required.They are ideal for tight bends, T-piece joints, dome end connections, and similar applications.These dams provide an excellent grip within the pipe and ensure a reliable all-around seal.Each dam is equipped with a weld purge gas inflation hose, an exhaust port for purge gas exit, and an additional hose for extra gas input, allowing for faster purging and achieving interpass temperature specifications for weld cooling.The dams facilitate the attainment of a zero colour (non-oxidised) weld, ensuring high-quality results.An additional hose is available for attaching a Weld Purge Monitor, enhancing control and monitoring of the welding process.Single Ended Dams are quick, fast, and extremely simple to use, facilitating efficient installation.Argweld is a recognised trademark in the industry, and their family of products aims to help achieve better welds while saving costs.

GBP 499.99
1