56 results (0,13340 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Hochiki ACD-EN Multi-Sensor with CO - Ivory Case Ivory

Hochiki ACD-EN Multi-Sensor with CO - Ivory Case Ivory

Hochiki ACD-EN Multi-Sensor with CO - Ivory Case IvoryIntroducing the ACD-EN the most sophisticated multi-sensor released to market to date. This revolutionary product offers a staggering 24 EN approved modes of operation including combinations of smoke detection fixed temperature heat detection rate of rise heat detection CO detection and COHb detection making it ideal for a variety of applications.The installer also has the ability to select a day mode and a night mode increasing flexibility and ensuring reliability.The ACD-EN is also enhanced for false alarm reduction. In modes featuring the Reduced False Alarm aspect RFA the sensor will automatically adjust its sensitivity based on its surroundings over time. The ACD-EN is installed with a default time delay.If the environment is clean with no smoke detected for a period of time this time delay is reduced. If the environment continues to be clean the time delay is reduced again.However if transient smoke is detected the time delay is increased. Any changes in CO andor temperature will also automatically adjust the sensitivity levels up. We call this ground-breaking algorithm Suitable Moving Average Time SMART.Compatible bases for the ACD-EN includes Hochiki Standard Base YBN-R3 Hochikis Loop Powered Base Sounder Ivory YBO-BS Hochiki Base Sounder Beacon Ivory Case Red LEDs YBO-BSB2RL Hochiki Base Sounder Beacon Ivory Case White LEDs YBO-BSB2WL and Hochiki Short Circuit Isolator Base YBN-R3SCI Ivory.

GBP 108.56
1

Hochiki Addressable Wall Beacon Ivory Case White LEDs CHQ-WBWL

Hochiki Addressable Wall Beacon Ivory Case White LEDs CHQ-WBWL

Hochiki Addressable CHQ-WBWL Wall Beacon Ivory Case White LEDsThe CHQ-WBWL is an Addressable Loop-Powered Wall Beacon with a high intensity LED and a custom designed free-form optic which produces a highly visible flash. Various coverage volumes available based on 2.4m ceiling heightinclude 5m 6m and 7m. The unit is designed to fit the YBN-R3 and YBN-R3SCI bases or the YBO-BS Base Sounder. This model features an ivory case and white LEDs.Key FeaturesEN54-23 compliantLoop poweredHigh intensity flashRange of coverage volumesWhite LEDsColour-matched with existing sensor range

GBP 65.82
1

Hochiki Addressable Wall Beacon Ivory Case Red LEDs CHQ-WBRL

Hochiki Addressable Wall Beacon Ivory Case Red LEDs CHQ-WBRL

Hochiki Addressable CHQ-WBRL Wall Beacon Ivory Case Red LEDsThe CHQ-WBRL is an Addressable Loop-Powered Wall Beacon with a high intensity LED and a custom designed free-form optic which produces a highly visible flash. Various coverage volumes available based on 2.4m ceiling heightinclude 5m 6m and 7m. The unit is designed to fit the YBN-R3 and YBN-R3SCI bases or the YBO-BS Base Sounder. This model features an ivory case and red LEDs.Key FeaturesEN54-23 compliantLoop poweredHigh intensity flashRange of coverage volumesRed LEDsColour-matched with existing sensor range

GBP 65.82
1

Hochiki Ceiling Beacon Ivory Case Red LEDs EN54-23 Approved CHQ-CBRL

Hochiki Ceiling Beacon Ivory Case Red LEDs EN54-23 Approved CHQ-CBRL

Hochiki CHQ-CBRL Ceiling Beacon Ivory Case Red LEDsAn Addressable Loop-Powered Beacon with a high intensity LED and a custom designed free-form optic which produces a highly visible flash. Coverage diameters include7.5m and 10m diameter. The unit is designed to fit the YBN-R3 and YBN-R3SCI bases or the YBO-BS Base Sounder Beacon. This model features an ivory case and red LEDs.Key FeaturesEN54-23 compliantLoop poweredHigh intensity flashRange of coverage diametersRed LEDsColour-matched with existing sensor rangeApproved by LPCB Certificate No 164s09

GBP 65.82
1

Hochiki Ceiling Beacon Ivory Case White LEDs EN54-23 Approved CHQ-CBWL

Hochiki Ceiling Beacon Ivory Case White LEDs EN54-23 Approved CHQ-CBWL

Hochiki CHQ-CBWL Ceiling Beacon Ivory Case White LEDs EN54-23 ApprovedAn Addressable Loop-Powered Beacon with a high intensity LED and a custom designed free-form optic which produces a highly visible flash. Coverage diameters include 5m 7.5m 10m and 15m diameter. The unit is designed to fit the YBN-R3 andYBN-R3SCI bases or theYBO-BS Base Sounder Beacon. This model features an ivory case and white LEDs.Key FeaturesEN54-23 compliantLoop poweredHigh intensity flashRange of coverage diametersWhite LEDsColour-matched with existing sensor rangeApproved by LPCB Certificate No 164s08

GBP 65.82
1

Hochiki Ceiling Beacon Ivory Case White LEDs 15m EN54-23 Approved CHQ-CBWL-15

Hochiki Ceiling Beacon Ivory Case White LEDs 15m EN54-23 Approved CHQ-CBWL-15

Hochiki CHQ-CBWL-15 Ceiling Beacon Ivory Case White LEDs 15m EN54-23 ApprovedAn Addressable Loop-Powered Beacon with a high intensity LED and a custom designed free-form optic which produces a highly visible flash. Coverage diameter is 15m. The unit is designed to fit the YBN-R3 and YBN-R3SCI bases or the YBO-BS Base Sounder. This model features an ivory case and white LEDs.Key FeaturesEN54-23 compliantLoop poweredHigh intensity flash15m coverage diameterWhite LEDsColour-matched with existing sensor rangeApproved by LPCB Certificate No 164s07

GBP 74.59
1

Hochiki SICAP2 Ivory Base Sounder Isolator Cover

Hochiki SICAP2 Ivory Base Sounder Isolator Cover

Hochiki SICAP2 Ivory Base Sounder Isolator CoverA protective cap which has been designed for the YBO-BSB2 but can also be fitted to the previous model YBO-BSB and the Base Sounder YBO-BS when either of these devices isnt fitted with a sensor. The cap is secured via a twist fit.The cap can also be added to the isolator base YBN-R3SCI to create a standalone isolator.Key FeaturesProtects wiring terminals on isolator bases and base soundersbeaconsEasy twist-fit

GBP 1.34
1

Hochiki MBB-2 Ivory Marine Mounting Back Box with Glands

Hochiki MBB-2 Ivory Marine Mounting Back Box with Glands

Hochiki MBB-2 Ivory Marine Mounting Back Box with GlandsThe approved design of the MBB-2 provides a splash-proof secure fixing for the Hochiki CDX and ESP Marine Approved Range of Detectors and their associated Bases. It can be installed on a variety of different fixing surfaces and because it has been manufactured to match the colour of Hochikis range of products it provides an aesthetically pleasing solution where surface fixed devices are required.The housing supports four 20 mm glanded entries for zone or loop cabling access. It is also supplied with base fixing screws and two cable glands specifically designed to provide protection against water ingress. The detector base fits directly onto the MBB-2 and sits within a slight recess. This provides the accurate fit and the protection against dust and water ingress. The MBB-1 is also the recommended choice of back box for Hochikis Waterproof Heat Detectors the DFG-60E and the ACB-EW.Key Features4 cable entry holes suitable for cable glands 2 glands suppliedColour matched to both ivory and white detector rangesApproved Sensor and Base rangeProvides moisture and dust resistant fixingIdeal for bulk-head fixingApproved by LR and GLNon-marine use version available SBB-2

GBP 5.54
1

Hochiki Marine Standard Ivory Mounting Base YBN-R6M

Hochiki Marine Standard Ivory Mounting Base YBN-R6M

Hochiki Marine Standard Ivory Mounting Base YBN-R6MModel YBN-R6M is a Conventional Detector Mounting Base approved for marine applications by GL Germanischer Lloyd and is associated with the CDX Range of Marine Approved Detectors.It is supplied with square cable clamps for secure and reliable cable termination but the base does not provide line continuity during detector removal therefore if Call Points are being used then these should be wired onto the zone first. The integrated third terminal provides remote indicator output.Key FeaturesIntegral remote indicator outputLow Profile only 8 mmRugged designElectronics freeQuick connections via square cable clampsAccepts 2.5 mm cablesBayonet slot low insertion force for detectorsApproved to MED by GLGL Type approval

GBP 4.99
1

Hochiki Marine Approved Short Circuit Isolator Base Ivory YBN-R3SCIM

Hochiki Marine Approved Short Circuit Isolator Base Ivory YBN-R3SCIM

Hochiki Marine Approved Short Circuit Isolator Base Ivory YBN-R3SCIMModel YBN-R3SCI is a sensor mounting base featuring an integral short-circuit isolator which will detect and isolate short-circuits on the loop. When a short-circuit is detected during power up the unit will drop the power to the rest of the loop.The YBN-R3SCI is compatible with the ESP range of sensors and does not require a loop address. A remote fire LED facility is provided when a sensor is attached to the base. NOTE A fitted sensor will still be powered when this device is isolating.

GBP 19.19
1

Hochiki Loop Powered Addressable Beacon - Ivory Case with Blue Lens CHQ-ABBLU

Hochiki Loop Powered Addressable Beacon - Ivory Case with Blue Lens CHQ-ABBLU

Hochiki CHQ-ABBLU Loop Powered Addressable Beacon - Ivory Case with Blue LensThe CHQ-ABBLU is anaddressable loop-powered Beacon with high-intensity LEDs and a Fresnel lens design which produces a highly visible flash. The casing exactly matches the Hochiki ESP Sensor range in shape and colour providing seamless integration. The unit can be used on the Standard ESP Base YBN-R3 the Base Sounder YBO-BS or the Base Sounder Beacon YBO-BSB.Key FeaturesHigh Intensity LED technologyVariable flash frequencyAddressable via Hand Held Programmer TCH-B100Up to 127 devices per loopBlue lens colourApproved by VdS

GBP 36.20
1

Hochiki CHQ-ABAMB Loop Powered Addressable Beacon - Ivory Case with Amber Lens

Hochiki CHQ-ABAMB Loop Powered Addressable Beacon - Ivory Case with Amber Lens

Hochiki CHQ-ABAMB Loop Powered Addressable Beacon - Ivory Case with Amber LensThe CHQ-ABAMB is an addressable loop-powered Beacon with high-intensity LEDs and a Fresnel lens design which produces a highly visible flash. The casing exactly matches the Hochiki ESP Sensor range in shape and colour providing seamless integration. The unit can be used on the Standard ESP Base YBN-R3 the Base Sounder YBO-BS the Base Sounder Beacon YBO-BSB or the Short-Circuit Isolator Base YBO-RSCI.Key FeaturesHigh Intensity LED technologyVariable flash frequency dependant on control panel compatibilityAddressable via Hand Held Programmer TCH-B100Up to 127 devices per loopAmber lens colourApproved by VdS

GBP 36.20
1

Hochiki Loop Powered Addressable Beacon - Ivory Case with Red Lens CHQ-AB

Hochiki Loop Powered Addressable Beacon - Ivory Case with Red Lens CHQ-AB

Hochiki CHQ-AB Loop Powered Addressable Beacon - Ivory Case with Red LensThe CHQ-AB range consists of addressable loop-powered Beacons which are fully compatible with Hochikis ESP Range of Bases.The Beacons have the ability to be turned on very quickly using a group command and are synchronised to flash at the same time. The innovative high-intensity LEDs and lens design produces a highly visible flash whilst the casing exactly matches the Hochiki ESP Sensor range in shape and colour providing seamless integration. Lenses are available in red CHQ-ABRED amber CHQ-ABAMB or blue CHQ-ABBLU.Can be used on Standard ESP Base YBN-R3 Base Sounder CHQ-BS or the Short-Circuit Isolator Base YBO-RSCI.FeaturesHigh Intensity LED technology1Hz flash frequencyAddressable via Hand Held Programmer TCH-B100Up to 127 devices per loopLow current consumptionAvailable in 3 lens coloursApproved by VdS

GBP 36.20
1

Hochiki Base Sounder Beacon Ivory Case Red LEDs YBO-BSB2RL

Hochiki Base Sounder Beacon Ivory Case Red LEDs YBO-BSB2RL

Hochiki Base Sounder Beacon Ivory Case Red LEDs YBO-BSB2RLModel YBO-BSB2RL is an O Rated EN54-23 compliant addressable loop powered Base Sounder with integral Beacon innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dBA 2 dBA with low current consumption. The unit is designed to fit to the Standard Base YBN-R3 or the Isolator Base YBN-R3SCI and can be fitted with any of the ESP Range of Sensors Beacons or Remote Indicators.The unit can also be converted into a wall sounder beacon with the simple addition of a Cap SICAP2. The sounder is Ingress Protection rated to IP21 and for internal use only. An Auto-Shutdown feature allows the user to set a fixed time within which the sounder or beacon will operate before automatically shutting down cutting noise pollution in the case of the sounder element. Sounder and Beacon elements can be operated independently from each other.Key FeaturesEN54-23 compliantO RatedSingle Loop Address - addressed via the TCH-B100 Hand Held ProgrammerVariable Sound Output 50 98 dBA 2 dBA output at 1 metreSounder and Beacon can operate independently0.5 or 1Hz flash frequencyFits Hochiki Standard or Isolator Base and supports ESP Sensors Addressable Beacons and Addressable Remote Indicator51 User-Selectable Tones all tones EN54-3 compatibleAuto-Shutdown feature prevents noise-pollutionAlso available in white or black

GBP 66.20
1

Hochiki Base Sounder Beacon Ivory Case White LEDs YBO-BSB2WL

Hochiki Base Sounder Beacon Ivory Case White LEDs YBO-BSB2WL

Hochiki Base Sounder Beacon Ivory Case White LEDs YBO-BSB2WLModel YBO-BSB2WL is an O Rated EN54-23 compliantaddressable loop powered Base Sounder with integral Beacon innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dBA 2 dBA with low current consumption. The unit is designed to fit to the Standard Base YBN-R3 or the Isolator Base YBN-R3SCI and can be fitted with any of the ESP Range of Sensors Beacons or Remote Indicators.The unit can also be converted into a wall sounder beacon with the simple addition of a Cap SICAP2. The sounder is Ingress Protection rated to IP21 and for internal use only. An Auto-Shutdown feature allows the user to set a fixed time within which the sounder or beacon will operate before automatically shutting down cutting noise pollution in the case of the sounder element. Sounder and Beacon elements can be operated independently from each other.Key FeaturesEN54-23 compliantO RatedSingle Loop Address - addressed via the TCH-B100 Hand Held ProgrammerVariable Sound Output 50 98 dBA 2 dBA output at 1 metreSounder and Beacon can operate independently0.5 or 1Hz flash frequencyFits Hochiki Standard or Isolator Base and supports ESP Sensors Addressable Beacons and Addressable Remote Indicator51 User-Selectable Tones all tones EN54-3 compatibleAuto-Shutdown feature prevents noise-pollutionAlso available in white and black

GBP 54.84
1

Hochiki SOC-E3N Conventional Ivory Photoelectric Smoke Detector

Hochiki SOC-E3N Conventional Ivory Photoelectric Smoke Detector

Hochiki SOC-E3N Conventional Ivory Photoelectric Smoke DetectorThe SOC-E3N is an optical smoke detector which is fully compatible with the majority of existing Conventional systems.The SOC-E3N incorporates Hochikis unique High Performance optical smoke chamber removing the need to use ionisation detectors in the majority of applications.ASWV Drift Compensation technology is incorporated to ensure the detector is operating at its optimum sensitivity and therefore reducing potential false alarms. If the contamination limit is exceeded then the integral red LED will flash once every three seconds to give a visual warning.The smoke chamber is easily removed or replaced for cleaning and utilises a unique baffle design which allows smoke to enter the chamber whilst keeping out ambient light.Key FeaturesRemovable High Performance chamber Automatic Sensitivity Window Verification ASWV Drift Compensation Technology Remote Indicator outputWide voltage range 9.5 30 V dcLow profile design with one-piece outer coverSingle fire LED - 360 viewingRange of mounting basesApproved by LPCBCDX Range BenefitsQuality High quality products ensures long term reliabilityFlase Alarm Reduction Hoghikis conventional range uses advanced verificaition techniques to reduce the potential for false or unwanted alarms. In addition the Photoelectric Smoke Detectors operate on very low sensitivty yet exceed the requirements of the EN54 standard to minimise false alarms.Approvals Hochikis conventional products are tested and approved to the latest standards and regulations by the major European third party test bodies including LPCB and VdS.Simple Installation Simple installation integration and therefore cost minimisation is achieved through special bases integrated on the same set of cables.Integration and Cost Minimisation Using a number of special bases and through integration detection and evacuation devices on the same set of cables the lowest cost of installation and ownership are achieved. Low current consumption and the capability of integration into security systems further reduce ownership costs.Compatibility Development in alliance with independent panel manufactures ensures that functions and benefits of the Hochiki Conventional Detection range are incorporated and rigorous testing confirms compatibility and compliance.Locking Mechanism The Hochiki Conventional range has been designed for ease of installation with a wide range of bases and adapters and a locking mechanism on all detectors for on-site activation.Simple and Robust Simple and robust connections provide sufficient space for all modern fire alarm cables.

GBP 18.58
1

Hochiki Recess Mount Base requires YYA-A YBN-UA

Hochiki Recess Mount Base requires YYA-A YBN-UA

Hochiki Recess Mount Base requires YYA-A YBN-UAModel YBN-UA is a mounting adaptor for both the ESP and CDX range of ivory sensors and detectors and their associated mounting bases. The YBN-UA allows a base and head combination to be flush mounted by providing a recess fixing the ceiling. It must beused witha fixing clamp kit YYA-1 which secures the YBN-UA within a pre-cut hole up to a maximum ceiling thickness of 30mm sold separately.shown with mounting base fitted - supplied separatelyKey FeaturesAllows base and analogue sensor or conventional detector to be flush mountedRequires fixing brackets sold separatelyColour-matched to existing ivory sensordetector rangesSturdy construction easy to installSuitable for a maximum ceiling thickness of 30 mm

GBP 9.24
1

Hochiki Standard Base YBN-R3 Ivory

Hochiki Standard Base YBN-R3 Ivory

Hochiki Standard Base YBN-R3 IvoryModel YBN-R3 is a Common Mounting Base which is fully compatible with Hochikis ESP sensors beacons base sounders and VADs.It is supplied with square cable clamps for secure and reliable cable termination and is also capable of driving a remote LED if required.Key FeaturesElectronics freeSupports the ESP SensorsStainless steel contactsTakes 2.5 mm cablesSlim profile - only 8 mmRugged wiring contactsFacility for remote indicatorQuick Connection via square cable clamps

GBP 2.18
1

Hochiki Photoelectric Smoke Sensor Ivory ALN-EN

Hochiki Photoelectric Smoke Sensor Ivory ALN-EN

Hochiki ALN-EN Photo Electric Smoke Sensor IvoryThe ALN-EN is a direct replacement of the ALG-EN and will share the same bases. Model ALN-EN is a Photoelectric Smoke Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol. The ALN-EN incorporates Hochikis newest High Performance Chamber Technology removing the need to use Ionisation Smoke Sensors in the majority of applications.This also allows the sensor threshold level to be increased thereby improving the signal to noise ratio and reducing susceptibility to false alarms. The ALN-EN smoke chamber is easily removed or replaced for cleaning and utilises a unique improved baffle design which allows smoke to enter the chamber whilst keeping out ambient light.Key FeaturesRemovable High Performance chamberTwin LEDs allow 360 viewing green when polling turn red in fireLocking mechanism sensor to baseVariable sensitivityElectronically addressedPulsingnon-pulsing controlled from panelApproved by LPCB VdSSIL Level 2 approved variants availableAvailable in whiteImprovementsEnhanced Performance ChamberNew Outer Cover DesignSoftware AdvancesIncrease Noise ImmunityFully backwards compatible

GBP 31.62
1

Hochiki Multi Heat Sensor Ivory ATJ-EN

Hochiki Multi Heat Sensor Ivory ATJ-EN

Hochiki ATJ-EN Multi Heat Sensor IvoryThe ATJ-EN is a direct replacement of the ACB-E and will share the same bases. Model ATJ-EN is a Multi-Heat Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol. The ATJ-EN incorporates a Variable Temperature heat element and a Rate of Rise heat element both of which are controlled from the Control Panel allowing either thermal element or both elements simultaneously to be active in making the fire decision. The sensor polling LEDs can also be controlled via the Control Panel pulsingnon-pulsing.Key FeaturesUser selectable modesIncorporates Fixed Temperature and Rate Of Rise Heat elementsTwin LEDs allow 360 viewing green when polling turn red in firePulsingnon-pulsing controlled from panelElectronically addressedLPCB VdS approved to Classes A1 B CSIL Level 2 approved variants availableAvailable in whiteImprovementsNew Outer Cover Design featuring indicative sensor type markingsSoftware AdvancesIncreased Noise ImmunityFully backwards compatible

GBP 31.62
1

Hochiki Conventional Schottky Base YBN-R6SK Ivory

Hochiki Conventional Schottky Base YBN-R6SK Ivory

Hochiki Conventional Schottky Base YBN-R6SK IvoryModel YBN-R6SK is a Conventional Detector Mounting Base with in-line Schottky Diode associated with the CDX Range of Detectors and is fully compatible with the majority of existing conventional fire alarm control panels.It is supplied with square cable clamps for secure and reliable cable termination and the base provides line continuity during detector removal. Therefore Call Points can be wired in any order on the zone providing a suitable panel and End Of Line EOL unit is used. The integrated third terminal provides remote indicator output.Key FeaturesIntegral remote indicator outputIn-line Schottky Diode for Line ContinuityLow Profile only 8 mmRugged designQuick connections via square cable clampsAccepts 2.5 mm cablesBayonet slot low insertion force for detectors

GBP 3.11
1

Hochiki Conventional White Beacon Red Lens CLB-EWHT

Hochiki Conventional White Beacon Red Lens CLB-EWHT

Hochiki CLB-EWHT Conventional White Beacon Red LensModel CLB-EWHT is a conventional Beacon for use on 24 V Sounder Circuits.The unit is fitted with a Fresnel lens and high-intensity LEDs a design which produces a highly visible flash. The casing exactly matches the white CDX Detector range in shape and colour providing seamless integration.Key FeaturesHigh Intensity LED technologyColour-matched to existing Ivory and White detector and base rangesFits standard CDX base YBN-R6

GBP 28.85
1

Hochiki Short Circuit Isolator Base YBN-R3SCI Ivory

Hochiki Short Circuit Isolator Base YBN-R3SCI Ivory

Hochiki Short Circuit Isolator Base YBN-R3SCI IvoryModel YBN-R3SCI is a sensor mounting base featuring an integral short-circuit isolator which will detect and isolate short-circuits on the loop. When a short-circuit is detected during power up the unit will drop the power to the rest of the loop. The YBN-R3SCI is compatible with the ESP range of sensors and does not require a loop address. A remote fire LED facility is provided when a sensor is attached to the base. NOTE A fitted sensor will still be powered when this device is isolating.Key FeaturesFeatures integral SCIEasy to fitSlim profileMatches standard base colours

GBP 16.28
1

Hochiki YBO-BS Loop Powered Base Sounder Ivory

Hochiki YBO-BS Loop Powered Base Sounder Ivory

Hochiki YBO-BS Loop Powered Base Sounder.Model YBO-BS is an addressable loop powered Base Sounder innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dBA 2 dBA with low current consumption. The unit is designed to fit to the Standard Base YBN-R3 or the Isolator Base YBO-RSCI from Batch Number 6044 and can be fitted with any of the ESP Range of Sensors Beacons or Remote Indicators.The unit can also be converted into a wall sounder with the simple addition of a Cap SICAP. The sounder is Ingress Protection rated to IP21 and for internal use only.An Auto-Shutdown feature allows the user to set a fixed time within which the sounder will operate before automatically silencing itself cutting noise pollution dependant on control panel compatibility.Key FeaturesLoop Powered with Single Loop Address - addressed automatically by Control Panel or via the TCH-B100 Hand Held ProgrammerVariable Sound Output 50 98 dBA -2 dBA output at 1 metreFits Hochiki Standard or Isolator Base and supports ESP Sensors Addressable Beacons and Addressable Remote Indicator51 User-Selectable Tones all tones EN54-3 compatibleAuto-Shutdown feature prevents noise-pollutionApproved by LPCB VdSAlso available in white and black

GBP 30.28
1