41 results (0,13679 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Hochiki ALN-ENSCI Analogue Photoelectric Smoke Sensor with SCI

Hochiki ALN-ENSCI Analogue Photoelectric Smoke Sensor with SCI

Hochiki ALN-ENSCI Analogue Photoelectric Smoke Sensor with SCIModel ALN-ENSCI is a Photoelectric Smoke Sensor with SCI which is fully compatible with Hochikis ESP Analogue Addressable Protocol. The ALN-ENSCI incorporates Hochikis newest High Performance Chamber Technology removing the need to use Ionisation Smoke Sensors in the majority of applications. This also allows the sensor threshold level to be increased thereby improving the signal to noise ratio and reducing susceptibility to false alarms. The ALN-ENSCI smoke chamber is easily removed or replaced for cleaning and utilises a unique improved baffle design which allows smoke to enter the chamber whilst keeping out ambient light.Key FeaturesRemovable High Performance chamberTwin LEDs allow 360 viewing green when polling amber when isolating red in fireLocking mechanism sensor to baseVariable sensitivityElectronically addressedPulsingnon-pulsing controlled from panel1

GBP 43.58
1

Hochiki ATJ-ENSCI Analogue Multi-Heat Sensor with SCI

Hochiki ATJ-ENSCI Analogue Multi-Heat Sensor with SCI

Hochiki ATJ-ENSCI Analogue Multi-Heat Sensor with SCIThe ATJ-ENSCI is a Multi-Heat Sensor with SCI which is fully compatible with Hochikis ESP Analogue Addressable Protocol.The ATJ-ENSCI incorporates a Variable Temperature heat element and a Rate of Rise heat element both of which are controlled from the Control Panel allowing either thermal element or both elements simultaneously to be active in making the fire decision. The sensor polling LEDs can also be controlled via the Control Panel pulsingnon-pulsing.Key FeaturesUser selectable modesIncorporates Fixed Temperature and Rate of Rise Heat elementsTwin LEDs allow 360 viewing green when polling amber when isolating red in firePulsingnon-pulsing controlled from panelElectronically AddressedOperating Voltage 17 41 VDCAlarm Current controlled by CIE 9.1 mA excluding remote indicatorCurrent in Short Circuit 13.5mATransmission Method Digital Communications Using ESPOperating Temperature Range -10 C to 50 CCompatible Bases YBV-R4

GBP 43.58
1

Hochiki Base Mounting Adapter YBD-RA

Hochiki Base Mounting Adapter YBD-RA

Hochiki Base Mounting Adapter YBD-RAThe YBD-RA Surface Wiring Adaptor allows the majority of Hochiki SensorsDetectors and their Mounting Bases to be fitted flush against a fixing surface whilst also allowing surface wiring without conduit to be connected.The adaptor features four 9mm x 8mm knock-outs for cableswires allowing surface-fixed wiring to be connected to an appropriate mounting base depending on application. The adaptor is moulded in ivory white ABS as standard which allows seamless integration with the majority of mounting bases and associated sensors and detectors.Key FeaturesCompatible with the majority of existing Analogue and Conventional basesColour matches standard Hochiki Analogue and Conventional sensordetectorbase ranges4 pre-moulded knock-outs provide wiring entryLow profile - only 16mm

GBP 3.83
1

Hochiki White Base Mounting Adapter YBD-RAWHT

Hochiki White Base Mounting Adapter YBD-RAWHT

Hochiki White Base Mounting Adapter YBD-RAWHTThe YBD-RAWHT Surface Wiring Adaptor allows the majority of Hochiki SensorsDetectors and their Mounting Bases to be fitted flush against a fixing surface whilst also allowing surface wiring without conduit to be connected.The adaptor features four 9mm x 8mm knock-outs for cableswires allowing surface-fixed wiring to be connected to an appropriate mounting base depending on application. The adaptor is moulded in ivory white ABS as standard which allows seamless integration with the majority of mounting bases and associated sensors and detectors.Key FeaturesCompatible with the majority of existing Analogue and Conventional basesColour matches standard Hochiki Analogue and Conventional sensordetectorbase ranges4 pre-moulded knock-outs provide wiring entryLow profile - only 16mm

GBP 14.57
1

Hochiki Single Zone Monitor with SCI CHQ-SZM2SCI

Hochiki Single Zone Monitor with SCI CHQ-SZM2SCI

Hochiki CHQ-SZM2SCI Single Zone Monitor with SCIA Single Zone Monitor designed to allow up to 6 conventional detectors to be interfaced to Hochikis analogue addressable system. Also available as a DIN Rail mountable version. Both models feature an integral short-circuit isolator.Key FeaturesLoop PoweredUp To 6 Conventional DetectorsSingle Loop AddressRemote LED OutputFully Monitored for Short and Open Circuit FaultsDIN Rail Version AvailableBoth Models Feature an Integral Short Circuit Isolator

GBP 59.81
1

Hochiki Intrinsically Safe Dual Zone Monitor DIN Module with SCI CHQ-DZMDINSCI-IS

Hochiki Intrinsically Safe Dual Zone Monitor DIN Module with SCI CHQ-DZMDINSCI-IS

Hochiki CHQ-DZMDINSCI-IS Intrinsically Safe Dual Zone Monitor DIN Module with SCIModel CHQ-DZMDINSCI-IS is Dual Zone Module which is fully compatible with Hochikis ESP analogue addressable protocol and I.S. equipment. It is supplied as a DIN Rail mountable module a boxed version is also available. Addressing is achieved via simple DIL switches.The device is designed to allow up to 40 20 per zone Conventional I.S. CDX Range detectors SLR-E-IS or DCD-1E-IS in the hazardous area to be interfaced to Hochikis ESP analogue addressable system within the safe area.The conventional zones on the CHQ-DZMDINSCI-IS do not support any line continuity options therefore if Call Points are being interfaced they should be wired at the beginning of the zone.Key FeaturesSingle loop addressRequires an auxiliary 24 V dc supplySupports two independent zones of Hochiki I.S. Conventional DetectorsBoth zones fully monitored for shortopen-circuitBoxed module version also availableBoth models feature an integral short-circuit isolatorPlease note that this module should only be installed in the safe area.

GBP 238.94
1

Hochiki Intrinsically Safe Sounder DIN Module CHQ-ISMDIN

Hochiki Intrinsically Safe Sounder DIN Module CHQ-ISMDIN

Hochiki CHQ-ISMDIN Intrinsically Safe Sounder DIN ModuleThis Sounder Control Module interfaces between the Hochiki Analogue system via a CHQ-DSC or conventional sounder OPs and the intrinsically safe sounderbeacon units via an intrinsically safe barrier.The module provides line monitoring for open or short circuits on the wiring connected to both the safe and hazardous areas.Key FeaturesProvides dual sounder circuitsProvides fault-monitored inputInterfaces between loop and I.S. soundersbeaconsFully monitored for short-circuitsRequires 24 V dc external power supply

GBP 117.26
1

Hochiki Orange Manual Call Point with SCI quotSmoke Ventquot HCP-EOSCI

Hochiki Orange Manual Call Point with SCI quotSmoke Ventquot HCP-EOSCI

Hochiki HCP-EOSCI Orange Manual Call Point with SCI Smoke VentThe HCP-EOSCI is an Analogue Addressable orange call-point based upon the industry standard KAC world series housing and features easy to install push-fit wiring terminals. The call point features the words SMOKE VENT.Key FeaturesTerminals can accommodate up to a 2.5 mm solid conductorOrange casingFeatures an integral SCIApproved by LPCB to EN54-112001Please Note The unit can support either a Frangible Glass element or a Non Frangible Plastic element.

GBP 54.42
1

Hochiki Intrinsically Safe Sounder Module CHQ-ISM

Hochiki Intrinsically Safe Sounder Module CHQ-ISM

Hochiki CHQ-ISM Intrinsically Safe Sounder ModuleThis Sounder Control Module interfaces between the Hochiki Analogue system via a CHQ-DSC or conventional sounder OPs and the intrinsically safe sounderbeacon units via an intrinsically safe barrier. The module provides line monitoring for open or short circuits on the wiring connected to both the safe and hazardous areas.Key FeaturesProvides dual sounder circuitsProvides fault-monitored inputInterfaces between loop and I.S. soundersbeaconsFully monitored for short-circuitsRequires 24 vdc external power supplyAlso available as a DIN module

GBP 98.18
1

Hochiki ESPFIREBEAMXTRA espFIREbeam Xtra Beam Smoke Sensor - Includes Controller and Reflector

Hochiki ESPFIREBEAMXTRA espFIREbeam Xtra Beam Smoke Sensor - Includes Controller and Reflector

Hochiki ESPFIREBEAMXTRA espFIREbeam Xtra Beam Smoke Sensor - Includes Controller and ReflectorThe esp FIREBEAM xtra is a Reflective Beam Smoke Detector fully approved to EN 54-122015 which can offer a maximum detection range of 160 m.The units newly designed optics increase sensitivity whilst the enhanced internal software reduces false alarms.The detector comes with a separate controller unit which allows engineers to commission monitor and maintain from ground level. Detection range is 70 m for the standard unit increasing to 140 m or 160 m with the addition of the medium or long-range reflector kits.The detector also features advanced motorised technology allowing it to self-align to the centre of the reflector during commissioning.Once commissioned the detector continually monitors alignment and will automatically realign itself back to the centre of the reflector if any building movement occurs.The FIREBEAM xtra features an integral loop module allowing full connectivity to the Hochiki ESP analogue addressable loop.Key Features7 70 m standard detection rangeExtensions kits available to enhance detection range up to 160 mApproved by VdS to EN 54-122015Continually corrects itself against building movementBrand new optics design reduces false alarmsFully compatible with the Hochiki ESP analogue addressable protocol

GBP 539.75
1

Hochiki Intrinsically Safe Compatible Dual Zone Monitor with SCI CHQ-DZMSCI-IS

Hochiki Intrinsically Safe Compatible Dual Zone Monitor with SCI CHQ-DZMSCI-IS

Hochiki CHQ-DZMSCI-IS Intrinsically Safe Compatible Dual Zone Monitor with SCIModel CHQ-DZMSCI-IS is Dual Zone Module which is fully compatible with Hochikis ESP analogue addressable protocol and I.S. equipment. It is supplied as an OEM version as illustrated which can be fitted within an IP67 rated enclosure. The unit is also available as a DIN Rail mountable module. Addressing is achieved via simple DIL switches.The device is designed to allow up to 40 20 per zone Conventional I.S. CDX Range detectors SLR-E-IS or DCD-1E-IS in the hazardous area to be interfaced to Hochikis ESP analogue addressable system within the safe area. The conventional zones on the CHQ-DZMSCI-IS do not support any line continuity options therefore if Call Points are being interfaced they should be wired at the beginning of the zone.Key FeaturesSingle loop addressRequires an auxiliary 24 V dc supplySupports two independent zones of Hochiki I.S. Conventional DetectorsBoth zones fully monitored for shortopen-circuitDIN rail version availableBoth models feature an integral short-circuit isolatorPlease note that this module should only be installed in the safe area

GBP 206.05
1

Hochiki Remote Indicator with Fire Text REM-EFIRETEXT

Hochiki Remote Indicator with Fire Text REM-EFIRETEXT

Hochiki Remote Indicator with Fire Text REM-EFIRETEXTThe REM-E Remote Indicator is designed for fire detection systems requiring local indication of an individual or group of fire detectors in alarm utilising an LED with a wide area of illumination and high onoff contrast.The unit comes with a single gang purpose-designed back box and operates with many types of conventional and analogue addressable fire detectors frequently eliminating the requirements to stock two types of indicator.The device can also be used for other applications requiring a local visual indicator such as process control security and shut down operations.

GBP 10.04
1

Hochiki Red Short Circuit Isolator Base YBO-RSCIRED

Hochiki Red Short Circuit Isolator Base YBO-RSCIRED

Hochiki Red Short Circuit Isolator Base YBO-RSCIREDYBO-RSCIRED is a Loop Isolator which is fully compatible with Hochikis ESP analogue addressable protocol. The YBO-RSCIRED Base has been designed to be used with the red CHQ-WS2 Wall Sounder or CHQ-WSB Wall Sounder Beacon. The YBO-RSCIRED does not use an address and has the same wiring configuration as the standard YBN-R3 Sensor Base making it very simple to install.Key FeaturesColour matches with CHQ-WS2 Wall Sounder and CHQ-WSB Wall Sounder BeaconDetects short circuits on loopStatus LEDConnection of up to 127 per loopBayonet slot low insertion force for detectorsQuick connection via square cable clamps

GBP 17.46
1

Hochiki Marine Multi Heat Sensor ATJ-ENM

Hochiki Marine Multi Heat Sensor ATJ-ENM

Hochiki ATJ-ENM Marine Multi Heat SensorModel ATJ-ENM is a Multi-Heat Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol.The ATJ-ENM incorporates a Variable Temperature heat element and a Rate Of Rise heat element both of which are controlled from the Control Panel allowing either thermal element or both elements simultaneously to be active in making the fire decision. The sensor polling LEDs can also be controlled via the Control Panel pulsingnon-pulsing.Key FeaturesUser selectable modesIncorporates Fixed Temperature and Rate of Rise Heat elementsTwin LEDs allow 360 degree viewing green when polling turning red in firePulsingnon-pulsing controlled from panelElectronically addressedLPCB EN54 Part 7 LR GLSIL Level 2 approved variants available

GBP 42.62
1

Hochiki Marine Multi Heat Sensor White ATJ-ENMWHT

Hochiki Marine Multi Heat Sensor White ATJ-ENMWHT

Hochiki ATJ-ENMWHT Marine Multi Heat Sensor WhiteModel ATJ-ENMWHT is a Multi-Heat Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol. The ATJ-ENMWHT incorporates a Variable Temperature heat element and a Rate of Rise heat element both of which are controlled from the Control Panel allowing either thermal element or both elements simultaneously to be active in making the fire decision. The sensor polling LEDs can also be controlled via the Control Panel pulsingnon-pulsing.Key FeaturesUser selectable modesIncorporates Fixed Temperature and Rate of Rise Heat elementsTwin LEDs allow 360 degree viewing green when polling turn red in firePulsingnon-pulsing controlled from panelElectronically addressedLPCB EN54 Part 7 LR GLSIL Level 2 approved variants availableAvailable in ivory

GBP 42.62
1

Hochiki Recess Mount Base requires YYA-A YBN-UA

Hochiki Recess Mount Base requires YYA-A YBN-UA

Hochiki Recess Mount Base requires YYA-A YBN-UAModel YBN-UA is a mounting adaptor for both the ESP and CDX range of ivory sensors and detectors and their associated mounting bases. The YBN-UA allows a base and head combination to be flush mounted by providing a recess fixing the ceiling. It must beused witha fixing clamp kit YYA-1 which secures the YBN-UA within a pre-cut hole up to a maximum ceiling thickness of 30mm sold separately.shown with mounting base fitted - supplied separatelyKey FeaturesAllows base and analogue sensor or conventional detector to be flush mountedRequires fixing brackets sold separatelyColour-matched to existing ivory sensordetector rangesSturdy construction easy to installSuitable for a maximum ceiling thickness of 30 mm

GBP 9.24
1

Hochiki White Recess Mount Base requires YYA-A YBN-UAWHT

Hochiki White Recess Mount Base requires YYA-A YBN-UAWHT

Hochiki White Recess Mount Base requires YYA-A YBN-UAWHTModel YBN-UAWHT is a mounting adaptor for both the ESP and CDX range of white sensors and detectors and their associated mounting bases. The YBN-UAWHT allows a base and head combination to be flush mounted by providing a recess fixing the ceiling. It is supplied with a fixing clamp kit YYA-1 which secures the YBN-UAWHT within a pre-cut hole up to a maximum ceiling thickness of 30mm.shown with mounting base fitted - supplied separatelyKey FeaturesAllows base and analogue sensor or conventional detector to be flush mountedSupplied with fixing bracketsColour-matched to existing white sensordetector rangesSturdy construction easy to installSuitable for a maximum ceiling thickness of 30 mm

GBP 9.24
1

Hochiki Marine Photoelectric Smoke Sensor White ALN-ENMWHT

Hochiki Marine Photoelectric Smoke Sensor White ALN-ENMWHT

Hochiki ALN-ENMWHT Marine Photoelectric Smoke Sensor WhiteModel ALN-ENMWHT is a Marine Approved Photoelectric White Smoke Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol.The ALN-ENM incorporates Hochikis newest High Performance Chamber Technology removing the need to use Ionisation Smoke Sensors in the majority of applications. This also allows the sensor threshold level to be increased thereby improving the signal to noise ratio and reducing susceptibility to false alarms.The ALN-ENM smoke chamber is easily removed or replaced for cleaning and utilises a unique improved baffle design which allows smoke to enter the chamber whilst keeping out ambient light.Key FeaturesApproved to MED by GLRemovable High Performance chamberTwin LEDs allow 360 viewing green when polling red in fireLocking mechanism sensor to baseVariable sensitivityElectronically addressedPulsingnon-pulsing controlled from panelApproved by LPCB VdS

GBP 42.62
1

Hochiki Multi-Sensor PhotoelectricHeat - Black case - ACC-ENBLK

Hochiki Multi-Sensor PhotoelectricHeat - Black case - ACC-ENBLK

Hochiki Multi-Sensor PhotoelectricHeat - Black case - ACC-ENBLKModel ACC-ENBLK is a Multi-Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol and incorporates a thermal element and High-Performance photoelectric smoke chamber. The ACC-ENBLK has three modes which are controlled from the Control Panel allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel pulsingnon-pulsing. The ACC-ENBLK smoke chamber can easily be removed or replaced for easy maintenance.Key Features User selectable modesIncorporates Optical Heat elementsRemovable High Performance ChamberTwin LEDs allow 3600 viewing green when polling turn red in firePulsingnon-pulsing controlled from panelVariable sensitivityElectronically AddressedSIL Level 2 approved variants availableAlso available in white and ivoryControl Panel compatibility required

GBP 49.44
1

Hochiki Single Zone Monitor DIN Enclosure with SCI CHQ-SZM2DINSCI

Hochiki Single Zone Monitor DIN Enclosure with SCI CHQ-SZM2DINSCI

Hochiki CHQ-SZM2DINSCI Single Zone Monitor DIN Enclosure with SCIModel CHQ-SZM2DINSCI is a Single Zone Monitor designed to allow up to 6 conventional detectors to be interfaced to Hochikis ESP analogue addressable system. The unit is supplied as a DIN Rail mountable version but a boxed module version is also available. Both models feature anintegral short-circuit isolator. The CHQ-SZM2DINSCI utilises simple DIL switches for reliable addressing.The conventional zone on the CHQ-SZM2DINSCI does not support any line continuity options if Call Points are being interfaced they should be wired at the beginning of the zone.Key FeaturesLoop poweredUp to 6 Conventional DetectorsSingle loop addressRemote LED outputFully monitored for short and open circuit faultsBoxed module version availableBoth models feature an integral short-circuit isolatorBoth models approved by LPCB VdS

GBP 67.92
1

Hochiki Marine Multi-Sensor Photoelectric and Heat White ACC-ENMWHT

Hochiki Marine Multi-Sensor Photoelectric and Heat White ACC-ENMWHT

Hochiki ACC-ENMWHT Marine Multi-Sensor Photoelectric and Heat WhiteModel ACC-ENMWHT is a Multi-Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol and incorporates a thermal element and High-Performance photoelectric smoke chamber.The ACC-ENMWHT has three modes which are controlled from the Control Panel allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel pulsingnon-pulsing. The ACC-ENMWHT smoke chamber can easily be removed or replaced for easy maintenance.Key FeaturesUser selectable modesIncorporates Optical Heat elementsRemovable High Performance ChamberTwin LEDs allow 360 degree viewing green when polling turn red in firePulsingnon-pulsing controlled from panelVariable sensitivityElectronically AddressedLPCB EN54 Part 7 LR GLAvailable in ivory

GBP 48.37
1

Hochiki Marine Multi-Sensor Photoelectric and Heat ACC-ENM

Hochiki Marine Multi-Sensor Photoelectric and Heat ACC-ENM

Hochiki ACC-ENM Marine Multi-Sensor Photoelectric and HeatModel ACC-ENM is a Multi-Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol and incorporates a thermal element and High Performance photoelectric smoke chamber.The ACC-ENM has three modes which are controlled from the Control Panel allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel pulsingnon-pulsing. The ACC-ENM smoke chamber can easily be removed or replaced for easy maintenance.Key FeaturesUser selectable modesIncorporates Optical Heat elementsRemovable High Performance ChamberTwin LEDs allow 360 degree viewing green when polling turning red in firePulsingnon-pulsing controlled from panelVariable sensitivityElectronically AddressedLPCB EN54 Part 7 LR GLSIL Level 2 approved variants available

GBP 48.37
1

Hochiki Waterproof Combined Heat Sensor ACB-EW

Hochiki Waterproof Combined Heat Sensor ACB-EW

Hochiki ACB-EW WaterproofMulti-Heat SensorACB-EW is a Waterproof Multi-Heat Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol.The ACB-EW incorporates a variable Fixed Temperature heat element and a Rate Of Rise heat element both of which are controlled from the Control Panel allowing either thermal element or both elements simultaneously to be active in making the fire decision. The sensor polling LEDs can also be controlled via the Control Panel pulsingnon-pulsing.Rated to IP67 the ACB-EW can be used externally and is supplied with its own fixing base which is used to fix the sensor. Flying leads from the sensor connect directly to the loop via waterproof connectors.Key FeaturesUser selectable modesIncorporates Fixed Temperature and Rate Of Rise Heat elementsTwin fire LEDs allow 360 viewingPulsingnon-pulsing controlled from panelElectronically AddressedIP Rated to IP67

GBP 73.51
1