25 results (0,19249 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Hikoki G18DBALJJZ Angle Grinder Brushless 18V 2X5.0AH Lithium-ion

Hikoki G18DBALJJZ Angle Grinder Brushless 18V 2X5.0AH Lithium-ion

Features: - Powerful motor with over-current protection to prevent burnout - Kickback protection system, anti-restart protection and soft start provide greater operator safety - Auto mode reduces no-load noise and vibration - Auto: 5,500/min - Resin coated components and mesh filters for extra protection against dust and moisture - Compact body and small grip circumference - Large two stage paddle switch (dead man action) - Compatible with the range of Hitachi 18V slide Li-Ion batteries from 1.5Ah to 6.0Ah

GBP 569.99
1

Hikoki KC18DPLJAZ Twin Pack 18V 2 x Multi Volt Li-ion HIKKC18DPLJA

Hikoki KC18DPLJAZ Twin Pack 18V 2 x Multi Volt Li-ion HIKKC18DPLJA

The HiKOKI KC18DPLJAZ Twin Pack contains the following 1 x 18V DV18DBXL Combi Drill with a powerful brushless motor and a robust aluminium gearcase. Reactive Force Control (RFC) provides increased safety. Fitted with a high-performance R&oumlhm chuck with a spindle lock and a built-in LED work light. No Load Speed 0-500/0-2,100/min. Impact Rate 0-31,500/bpm Max. Torque 136Nm Torque Settings 22 Weight 2.5kg 1 x 18V WH18DBDL2 Impact Driver with a high power brushless motor and a triple hammer mechanism three anvils for higher power and extended life. It offers a 4-mode speed selection and is IP65 rated for dust resistance and waterproofing. No Load Speed 0-2,900/min. Impact Rate 0-4,000/bpm Max. Torque 207Nm Capacity Screw 4-10mm, Bolt M5-M18 HT Bolt M5-M14 Self-drilling Screw & Oslash3.5-6 Weight 1.6kg Also supplied with 2 x 18/36V 5/2.5Ah Multi Volt Li-ion Batteries, 1 x UC18YSL3 Charger, 1 x Side Handle for Combi and 1 x Carry Case.

GBP 799.99
1

Hikoki KC18DBFL2/JAZ 18V 2 Pce Cordless Brushless Kit - Combi Drill & Impact Driver Kit - 2 X 5.0AH Batteries - Charger - Case

Hikoki KC18DBFL2/JAZ 18V 2 Pce Cordless Brushless Kit - Combi Drill & Impact Driver Kit - 2 X 5.0AH Batteries - Charger - Case

HiKOKI 18V Combi Drill with Brushless Motor DV18DBFL2. Lightweight slide-in Li-Ion batteries. Only 189mm body length - ideal for confined spaces. Forward & reverse switch. LED spotlight illuminates workpiece. Battery level indicator. Metal belt clip 13mm metal Keyless chuck with ratcheting lock. Spindle lock. Soft grip handle. Tool Specifications: No Load Speed: 0-400/1,800 rpm. Impact Rate: 0-6,000/27,000 Max. Capacity Brick: 16mm. Max. Capacity Mild Steel:13mm. Max. Capacity Soft Wood: 50mm Maximum Torque: 70Nm (hard). Charge Time: 90 Mins. Weight: 1.7 Kg. HiKOKI 18v Impact Driver with Brushless Motor WH18DBFL2. 126mm body length LED spotlight illuminates workpiece Metal belt clip Forward & reverse switch Tool Specifications: No-load Speed: 0-3100 rpm. Max Torque: 172Nm (hard). Capacity(Bolt): M5-M16. Capacity(HT Bolt): M5-M12. Overall Length: 126mm. Weight: 1.6kg.

GBP 539.99
1

Hikoki WF18DSLJJZ 18V Collated Screwdriver with 2X5.0AH Li-ion Batteries

Hikoki WF18DSLJJZ 18V Collated Screwdriver with 2X5.0AH Li-ion Batteries

WF18DSL 18V Collated Screwdriver Cordless collated screwdriver Quick adjustment button for 25-41mm screws Supplied with 2x5.0AH Li-ION Batteries Quick release for fast changing of collated screw strips Belt guide on slider case ensures accurate feeding of collated screw strips Silent clutch with a multiple disc clutch system that achieves shock free clutching and low noise operation Surface protector shields work surface from accidental damage Remaining battery indicator light displays available charge High rotation speed ensures rapid driving of screws Detachable slider case allows easy driver bit replacement Tool free depth adjustment for flush, proud or deep driving Screws Not Included 1 year standard warranty. Eligible for extended warranty when registered within 4 weeks of purchase.

GBP 639.99
1

Hikoki P18DSLJJZ 18V Cordless Planer 82MM with 2X 5.0AH Battery Packs and Charger in Carry Case

Hikoki P18DSLJJZ 18V Cordless Planer 82MM with 2X 5.0AH Battery Packs and Charger in Carry Case

Tool Features: Rabbeting Depth: 9.0mm. Built in Stand to prevent the blade damaging work pieces. Remaining battery indicator lamp. P18DSL/L4 18v Li-ion Planer provides a no load speed of 16,000rpm, delivering an 82mm planning width, a 2mm maximum planning depth per pass and an impressive rebate depth of 9mm. The well balanced, lightweight 3.3kg design of the P18DS /L4 makes transportation around the worksite easy without compromising on power, whilst the ergonomic soft grip handle provides maximum user comfort reducing fatigue on prolonged use and providing greater tool control.

GBP 519.99
1

Hikoki CL18DSL/W4Z Cordless Stud Cutter 18V Body Only Version - No Batteries Or Charger Supplied

Hikoki CL18DSL/W4Z Cordless Stud Cutter 18V Body Only Version - No Batteries Or Charger Supplied

18V stud cutter, ideal for trade professionals. The stud cutter cuts quickly and quietly with no sparks or chips, and does minimal damage to the work piece. High speed cutting of studs with up to 660 per charge (M10). Multi-edged blades prolong operating life, and has a convenient stud mounting hole that enables rapid cutting of uniform lengths. Features and Benefits: Max Cuts Per Charge (Mild steel studs) M10: 660, M8: 1020, M6: 1520, 3/8"W: 740. Cuts quickly and quietly with no sparks or chips. Minimal damage to the work piece. Multi-edged blades prolong operating life. Convenient stud mounting hole enables rapid cutting of uniform lengths.

GBP 899.99
1

Hikoki CR18DSLJJZ 18V Reciprocating Saw 2X5.0 Ah Lithium-ion

Hikoki CR18DSLJJZ 18V Reciprocating Saw 2X5.0 Ah Lithium-ion

The CR18DSLJJZ 18V Reciprocating Saw is a high-performance cordless tool designed for efficient cutting across various materials, including wood, metal, and plastics. Powered by two 5.0Ah lithium-ion batteries, it offers extended runtime and double the performance compared to 3.0Ah batteries, ensuring prolonged and uninterrupted operation. The saw includes a variable speed trigger, allowing precise control with a no-load speed of up to 2,100 strokes per minute and a 28mm stroke length, facilitating fast and efficient cutting. Its tool-free blade change system enables quick and effortless blade replacements, enhancing productivity. Designed with user comfort in mind, the soft grip handle reduces fatigue during extended use. Additionally, the adjustable front shoe maximises blade life, and the safety lock-off button ensures secure operation. This versatile reciprocating saw is ideal for both professional tradespeople and DIY enthusiasts seeking reliability and performance in their cutting tasks. Features and Benefits Battery-powered reciprocating saw for versatile cutting across different materials Equipped with dual 5.0Ah lithium-ion batteries for extended usage and improved efficiency Adjustable speed trigger for accurate and controlled cutting Maximum speed of 2,100 strokes per minute and 28mm stroke length for fast performance Quick and easy blade changes with a tool-free system Ergonomic handle with a soft grip for greater comfort during long tasks Front shoe adjustment to maximise blade durability Built-in safety lock-off feature for added protection

GBP 599.99
1

Hikoki KC18DKLJBZ Twin Pack 18V 2X5.0AHLI-ION (DV18DSDL, WH18DSAL)

Hikoki KC18DKLJBZ Twin Pack 18V 2X5.0AHLI-ION (DV18DSDL, WH18DSAL)

DV18DSDL Features: Extremely high maximum torque of 92Nm. Lightweight slide-in Li-Ion batteries. Compatible with the range of Hikoki and Hitachi 18V slide Li-Ion batteries from 1.5Ah to 6.0Ah. 2 speed gearbox to suit most applications. Raised body mouldings for extra protection against dust and dirt. Slimline soft grip handle. Forward & reverse switch. White LED spotlight illuminates work piece. Battery level indicator. 13mm metal Jacobs chuck with ratcheting lock. Spindle lock. Metal belt clip can be fitted for right- or left-handed use. WH18DSAL Features: Only 166mm body length. Slimline soft grip handle. Maximum tightening torque of 145Nm. Forward & reverse switch. LED spotlight illuminates work piece. " hex bit holder. Belt hook can be fitted to left or right side. Specification DV18DSDL: Maximum torque: 92Nm. No-load speed: High: 0-1800/min, Low: 0-400/min. Impact rate: High: 0-27000/min, Low: 0-6000/min. Chuck capacity: 13mm Capacity: Wood: 65mm, Metal :13mm, Brick: 16mm. Length: 235mm. Weight: 2.2kg. WH18DSAL: Maximum torque: 145Nm. No-load speed: 0-2600/min. Capacity: Bolt: M6-M14. Charge time: 60 Minutes. Drive: 6.35mm (1/4") Hex Length: 166mm. Weight: 1.7kg. The Hikoki KC18DKL/JBZ is a professional cordless twin pack featuring combi drill and impact driver with 5.0Ah batteries. The 5.0Ah batteries will provide double the run time of 3Ah batteries thanks to technological advancements, they also have the multiplex protection system to enhance battery life and are the same size and weight as previous 3.0Ah and 4.0Ah batteries. The charge time for the 5Ah batteries is 75 minutes.

GBP 549.99
1

Hikoki DV18DBXL/JRZ Brushless Combi Drill 18V 2 x 5.0/2.5Ah Multi-Volt Li-ion HIKDV18DBXLI

Hikoki DV18DBXL/JRZ Brushless Combi Drill 18V 2 x 5.0/2.5Ah Multi-Volt Li-ion HIKDV18DBXLI

The HiKOKI DV18DBXL Brushless Combi Drill features Reactive Force Control (RFC), which senses tool overload and stops rotation to ensure user safety and protect the tool motor and battery. Fitted with a robust aluminium gear case and a high-performance R&oumlhm chuck with spindle lock. There is also a built-in LED work light, ideal when working in darker spaces. Supplied with 2 x 18/36V 5.0/2.5Ah Multi-Volt Li-ion Batteries* 1 x UC18YSL3 Charger 1 x Case *Multi-Volt batteries provide a high power output, similar to mains powered tools. Batteries are compatible with existing Hitachi/HiKOKI 18V tools. Specification No Load Speed 0-500/0-2,100/min. Impact Rate 0-31,500/bpm Max. Torque 136Nm, 22 Stages Capacity Masonry 16mm, Steel 13mm, Wood 76mm Overall Length 204mm Weight 2.5kg

GBP 529.99
1

Hikoki NT1865DM/J4Z 18V Brushless 16G Straight Finish Nailer Body Only Version - No Batteries Or Charger Supplied

Hikoki NT1865DM/J4Z 18V Brushless 16G Straight Finish Nailer Body Only Version - No Batteries Or Charger Supplied

Tool Specifications: Tool Features: A unique air spring drive system that uses the compressed air sealed in the main unit brings various advantages of pneumatic technologies. Drives 3 nails per sec. with zero ramp-up time and quicker response time between drives. Low-recoil, yet powerful enough to set nails flush consistently. No combustion noise and no gas fumes. Consistent performance even at low temperatures or high altitudes. (The operating environment for these products is between 0 and 40.) The Hikoki NT1850DM 18v Li-Ion Brushless 16Ga Straight Finish Nailer has a unique air spring drive system (similar to Hikoki's pneumatic line) that uses compressed air to drive each nail resulting in zero ramp up time, increased shooting speed, recoil that feels like a pneumatic nailer, quicker response time between drives, better flush driving, even at an angle and easy maintenance due to fewer parts to manage.

GBP 639.99
1

Hikoki NT1865DM 18V Brushless 16G Straight Finish Nailer with X 3.0AH Li-ion Batteries + UC18YFSL Charger + Nose Cap + Safety Glasses in Carry Case

Hikoki NT1865DM 18V Brushless 16G Straight Finish Nailer with X 3.0AH Li-ion Batteries + UC18YFSL Charger + Nose Cap + Safety Glasses in Carry Case

Tool Specifications: Tool Features: A unique air spring drive system that uses the compressed air sealed in the main unit brings various advantages of pneumatic technologies. Drives 3 nails per sec. with zero ramp-up time and quicker response time between drives. Low-recoil, yet powerful enough to set nails flush consistently. No combustion noise and no gas fumes. Consistent performance even at low temperatures or high altitudes. (The operating environment for these products is between 0 and 40.) The Hikoki NT1850DM 18v Li-Ion Brushless 16Ga Straight Finish Nailer has a unique air spring drive system (similar to Hikoki's pneumatic line) that uses compressed air to drive each nail resulting in zero ramp up time, increased shooting speed, recoil that feels like a pneumatic nailer, quicker response time between drives, better flush driving, even at an angle and easy maintenance due to fewer parts to manage.

GBP 899.99
1

Hikoki NR1890DCJ6Z 18V Brushless Clipped Head Framing Nailer - Body Only Version - No Batteries Or Charger Supplied

Hikoki NR1890DCJ6Z 18V Brushless Clipped Head Framing Nailer - Body Only Version - No Batteries Or Charger Supplied

Features and Benefits: Drives 1.5 to 2 nails per sec. with zero ramp-up time and quicker response time between drives. Offers low-recoil and sets nails flush consistently. No combustion noise and no gas fumes. Consistent performance even at low temperatures or high altitudes (The operating environment for these products is between 0C and 40C) Technical Specification: Driving System: Air spring Nail length: 50mm to 90mm Driving speed: 1.5 to 2 nails/sec. (intermittent) Loading capacity: 47 nails Firing mode: Full sequential / Contact. Unique Air Spring Drive System that uses compressed air to drive each nail resulting in zero ramp up time, increased driving speed, recoil that feels like a pneumatic nailer and quicker response time between drives. Brushless motor for longer run time per charge, less maintenance and increased durability. Drives up to 400 nails per charge using the compact 3.0Ah battery. Tool-less depth of drive adjustment for a professional finish with varying materials. Power switch located on control panel must be depressed for 1 second to activate the nailer and automatically switches off after 30 minutes of inactivity for added safety. Selective actuation on the control panel transitions between sequential mode and bump fire mode, when rapid nailing is preferred. Battery charge indicator located on tool control panel to easily check the available power in battery pack for less downtime. Ergonomically formed soft grip handle provides comfort and ensures a secure hold. Side lock trigger switch located on handle, locks the trigger to prevent accidental firing when nailer is not in use. Pivoting rafter hook for easy storage when nailer is not needed 30 magazine holds approximately 47 paper strip collated fasteners from 50 up to 90mm in length. High & stable driving power allows the nailer to drive 90mm nails into even the toughest of timber materials with ease. Hardened claw tip resists wear on the nose and minimizes slippage when driving at an angle or toe-nailing Compatible with all Hikoki 18V Lithium Ion slide type batteries 4.5 Kg and well balanced for easy maneuverability

GBP 569.99
1

Hikoki C18DSLJJZ Circular Saw 18V 2X5.0AH Lithium-ion

Hikoki C18DSLJJZ Circular Saw 18V 2X5.0AH Lithium-ion

Features: - High spec circular saw with high capacity 5.0Ah Li-Ion batteries has double the performance of a 3.0Ah Li-Ion battery thanks to advancements in battery technology. - Multiplex protection circuit for maximum battery life, the same size and weight as 3.0Ah/4.0Ah Li-Ion battery. - Electric brake for operator safety, slim line blade (1.6mm kerf) reduces battery drain to maximise cutting time. - Spotlight illuminates cut line and no riving knife means easier plunge cutting.

GBP 499.99
1

Hikoki DS18DSDLJJZ Drill Driver 18V 2X5.0AH Lithium-ion

Hikoki DS18DSDLJJZ Drill Driver 18V 2X5.0AH Lithium-ion

Features: - Powerful drill/driver with high capacity 5.0Ah Li-Ion batteries - Double the performance of a 3.0Ah Li-Ion battery thanks to advancements in battery technology - Multiplex protection circuit for maximum battery life - Same size and weight as 3.0Ah/4.0Ah Li-Ion battery - Extremely high maximum torque of 92Nm (hard) - Lightweight slide-in Li-Ion batteries - 2 speed gearbox to suit most applications - Raised body mouldings for extra protection against dust and dirt - Slimline soft grip handle - Forward & reverse switch - White LED spotlight illuminates workpiece - Battery level indicator - 1300 metal Jacobs chuck with ratcheting lock - Spindle lock - Metal belt clip can be fitted for right or left-handed use

GBP 629.99
1

Hikoki NR1890DCJPZ 18V Brushless Clipped Head Framing Nailer with 2X 5.0 Ah Li-ion Batteries and Charger in Carry Case

Hikoki NR1890DCJPZ 18V Brushless Clipped Head Framing Nailer with 2X 5.0 Ah Li-ion Batteries and Charger in Carry Case

Features and Benefits: Drives 1.5 to 2 nails per sec. with zero ramp-up time and quicker response time between drives. Offers low-recoil and sets nails flush consistently. No combustion noise and no gas fumes. Consistent performance even at low temperatures or high altitudes (The operating environment for these products is between 0C and 40C) Technical Specification: Driving System: Air spring Nail length: 50mm to 90mm Driving speed: 1.5 to 2 nails/sec. (intermittent) Loading capacity: 47 nails Firing mode: Full sequential / Contact. Unique Air Spring Drive System that uses compressed air to drive each nail resulting in zero ramp up time, increased driving speed, recoil that feels like a pneumatic nailer and quicker response time between drives. Brushless motor for longer run time per charge, less maintenance and increased durability. Drives up to 400 nails per charge using the compact 3.0Ah battery. Tool-less depth of drive adjustment for a professional finish with varying materials. Power switch located on control panel must be depressed for 1 second to activate the nailer and automatically switches off after 30 minutes of inactivity for added safety. Selective actuation on the control panel transitions between sequential mode and bump fire mode, when rapid nailing is preferred. Battery charge indicator located on tool control panel to easily check the available power in battery pack for less downtime. Ergonomically formed soft grip handle provides comfort and ensures a secure hold. Side lock trigger switch located on handle, locks the trigger to prevent accidental firing when nailer is not in use. Pivoting rafter hook for easy storage when nailer is not needed 30 magazine holds approximately 47 paper strip collated fasteners from 50 up to 90mm in length. High & stable driving power allows the nailer to drive 90mm nails into even the toughest of timber materials with ease. Hardened claw tip resists wear on the nose and minimizes slippage when driving at an angle or toe-nailing Compatible with all Hikoki 18V Lithium Ion slide type batteries 4.5 Kg and well balanced for easy maneuverability

GBP 739.99
1

Hikoki DH18DBLJPZ Rotary Hammer Brushless 18V 2X5.0AH Lithium-ion

Hikoki DH18DBLJPZ Rotary Hammer Brushless 18V 2X5.0AH Lithium-ion

The DH18DBL is a Brushless Hammer with SDS-Plus Shank and a full load impact rate of 3950 a minute. Features: - Impact Rate 0-3950/min - Drilling capacity in concrete 26mm - Efficient brushless motor works approx. 50% more than the conventional brushed DC motor per battery charge - Reactive Force Control (RFC) system reduces risk of injury from tool overload - Constant speed control - Over current protection - 3 mode action: rotary drilling, hammer drilling or chiseling - Built-in LED light - Remaining battery indicator

GBP 719.99
1

Hikoki KC18DBFL2/JCZ 18V Twin Pack Cordless Brushless Kit - Combi Drill & Impact Driver Kit - 2 X 3.0AH Batteries

Hikoki KC18DBFL2/JCZ 18V Twin Pack Cordless Brushless Kit - Combi Drill & Impact Driver Kit - 2 X 3.0AH Batteries

Features and Benefits: DV18DBFL2 Combi Drill Lightweight slide-in Li-Ion batteries. Only 189mm body length - ideal for confined spaces. Maximum torque of 70Nm (hard). Forward & reverse switch. LED spotlight illuminates work piece. Battery level indicator. Metal belt clip. 13mm metal chuck with ratcheting lock. Spindle lock. Soft grip handle. WH18DBFL2 Impact Driver 126mm body length. Maximum torque of 172Nm (hard). M5-M16 Bolt Capacity LED spotlight illuminates workpiece. Forward & reverse switch. Metal belt clip Forward & reverse switch.

GBP 469.99
1

Hikoki WR18DSDLJJZ Impact Wrench 18V2X5.0AH Li-ion

Hikoki WR18DSDLJJZ Impact Wrench 18V2X5.0AH Li-ion

The Hikoki 18V cordless heavy-duty impact wrench features a robust motor to effortlessly handle tough fastening tasks while the compact, lightweight design ensures portability and ease of use. With a versatile torque range of 140Nm to 255Nm, this impact wrench delivers precise control and flexibility for various applications. Features and Benefits High tightening torque of 255Nm (hard) to handle tough fastening tasks, saving time and effort Power mode provides maximum performance for demanding tasks Safe mode for smaller jobs (140Nm) provides precise control to prevent over-tightening and damage Compact design (only 173mm body length) enhances manoeuvrability in tight spaces, to improve accessibility and efficiency White LED spotlight illuminates your working area for improved visibility and safe working Battery level indicator displays remaining battery life to prevent unexpected downtime and interruptions in. square drive is compatible with a wide range of sockets and accessories for versatile use Contents 1x cordless impact wrench 2x 5.0Ah Li-ion batteries 1x UC18YRSL charger 1x storage case Typical Applications Removes and tightens lug nuts, bolts, and screws during tyre changes, brake repairs, and engine maintenance Speed up construction tasks by fastening or loosening bolts and screws in wooden frames, metal structures, and more Complete home improvement projects, such as assembling furniture, installing shelves, or building outdoor structures Simplify maintenance tasks in industrial settings, including machinery repair, equipment installation, and facility maintenance Notes Socket not included 1-year standard warranty. Eligible for an extended warranty when registered within 4 weeks of purchase

GBP 559.99
1