58 results (0,18724 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

HMT VersaDrive ImpactaTap M12 x 1.75mm

HMT VersaDrive ImpactaTap M12 x 1.75mm

VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 62.99
1

HMT VersaDrive 90 Countersink 25.0mm (M12)

HMT VersaDrive 90 Countersink 25.0mm (M12)

The VersaDrive Countersink is a premium quality countersink with fully ground flutes and Titanium coating to help reduce wear and blunting. VersaDrive Countersinks have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. Utilise the convenience and power of an impact wrench to quickly debur and countersink holes up to 16.5mm with minimal torque kick-back against the operator.Features & Benefits- 90 Point Angle for Countersunk Bolt Heads- Safer use with minimal kickback- Specially hardened for impact wrench use up to 16.5mm- High-Grade Tool Steel for high accuracy & long life- GoldMax low friction Titanium Coating to stop burn out- High Strength, Non-slip shank design- 1st Impact rated countersinks on the market

GBP 69.99
1

HMT Versadrive Drillsink Impactatap Set - M8 M10 M12

HMT Versadrive Drillsink Impactatap Set - M8 M10 M12

The VersaDrive DrillSink and ImpactaTap Combination Set contains tooling designed to speed up drilling, tapping and countersinking connection holes in metal. The VersaDrive Drillsink is an innovative combined drilling & countersinking tool to save metalworkers time & increase hole accuracy by drilling & then countersinking fixing holes in one operation. VersaDrive ImpactaTaps are the first range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.

GBP 299.99
1

HMT VersaDrive ImpactaTap M12 x 1.75mm 10 Pack

HMT VersaDrive ImpactaTap M12 x 1.75mm 10 Pack

VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 699.99
1

HMT VersaDrive ImpactaTap M12 x 1.50 Metric Fine

HMT VersaDrive ImpactaTap M12 x 1.50 Metric Fine

VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 73.99
1

HMT VersaDrive ImpactaTap Long Series M12 x 1.75

HMT VersaDrive ImpactaTap Long Series M12 x 1.75

VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 103.99
1

HMT VersaDrive 90 Countersink 25.0mm (M12) 10 Pack

HMT VersaDrive 90 Countersink 25.0mm (M12) 10 Pack

The VersaDrive Countersink is a premium quality countersink with fully ground flutes and Titanium coating to help reduce wear and blunting. VersaDrive Countersinks have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. Utilise the convenience and power of an impact wrench to quickly debur and countersink holes up to 16.5mm with minimal torque kick-back against the operator.Features & Benefits- 90 Point Angle for Countersunk Bolt Heads- Safer use with minimal kickback- Specially hardened for impact wrench use up to 16.5mm- High-Grade Tool Steel for high accuracy & long life- GoldMax low friction Titanium Coating to stop burn out- High Strength, Non-slip shank design- 1st Impact rated countersinks on the market

GBP 819.99
1

HMT VersaDrive Spiral Flute ImpactaTap M12 x 1.75mm

HMT VersaDrive Spiral Flute ImpactaTap M12 x 1.75mm

VersaDrive Spiral Flute Taps are designed for tapping deep & blind holes and can be used with the VersaDrive Clutched collet or adapted for use in a reversible Magnet Drill, impact wrench or even used with any standard Hand Tap wrench.VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel. Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 109.99
1

HMT VersaDrive Heavy Duty Drill-Tap, M12 x 1.75mm

HMT VersaDrive Heavy Duty Drill-Tap, M12 x 1.75mm

VersaDrive Heavy Duty Impacta-Drill Taps are an industrial metalwork or fabrication tool for drilling and tapping heavy steel in one easy operation.Primarily they are designed to be used with a reversible Magnet drill, although they can also be adapted for use with an impact wrench to enlarge and tap existing holes.With a drill point optimised for use in fixed drilling machines like Magnetic Drills or Pillar drills, these are not recommended for use in a pistol drill. Where they are to used with an impact wrench to enlarge and tap holes pilot drilling is recommended with a separate drill bit.Features& Benefits- Fast Tapping with Minimal Kickback- Specially hardened for Impact Wrench use- High Grade Tool Steel for high accuracy & long life- GoldMax low-friction titanium coating to stop burn-out- High strength, non-slip shank design- Unique Dual-Point Starting Angle for easy alignment & fast cut- Chipbreaker action for Automatic chip clearance when Impact Tapping

GBP 102.99
1

HMT VersaDrive 90 DrillSink 13 Drill x 25mm (M12)

HMT VersaDrive 90 DrillSink 13 Drill x 25mm (M12)

The VersaDrive Drillsink is an innovative combined drilling & countersinking tool to save metalworkers time & increase hole accuracy by drilling & then countersinking fixing holes in one operation.This combination tool provides perfect countersinking accuracy every time by locating the drilled hole in perfect alignment to the countersink. This helps prevent tool chatter and blunting commonly found with standard countersinks.VersaDrive DrillSinks have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Suits M6 set screws (DIN 74)- Drill & Countersink in one easy operation- Perfect concentricity creates the perfect Countersink- Ground flutes for high accuracy and long life- High-Grade tool steel- High strength, non-slip shank design- GoldMax low-friction titanium coating to stop burn-out- Prevents the chattering of standard countersinks

GBP 109.99
1

HMT VersaDrive 90 DrillSink 10.2 Drill x 25mm (M12 Tap)

HMT VersaDrive 90 DrillSink 10.2 Drill x 25mm (M12 Tap)

The VersaDrive Drillsink is an innovative combined drilling & countersinking tool to save metalworkers time & increase hole accuracy by drilling & then countersinking fixing holes in one operation.This combination tool provides perfect countersinking accuracy every time by locating the drilled hole in perfect alignment to the countersink. This helps prevent tool chatter and blunting commonly found with standard countersinks.VersaDrive DrillSinks have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Suits M6 set screws (DIN 74)- Drill & Countersink in one easy operation- Perfect concentricity creates the perfect Countersink- Ground flutes for high accuracy and long life- High-Grade tool steel- High strength, non-slip shank design- GoldMax low-friction titanium coating to stop burn-out- Prevents the chattering of standard countersinks

GBP 99.99
1

HMT VersaDrive ImpactaTap 4 Pc Set: M12, M16, M20, M24

HMT VersaDrive ImpactaTap 4 Pc Set: M12, M16, M20, M24

VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 329.99
1

HMT VersaDrive Rapid-Lock Clutched Tap Collet, M8-M12 Capacity

HMT VersaDrive Rapid-Lock Clutched Tap Collet, M8-M12 Capacity

The HMT VersaDrive Clutched tap collet system is a unique method of effectively threading blind holes. One collet works with the range of Patented VersaDrive taps. When the tap comes to the bottom of the hole, the clutch system will engage and stop the tap from breaking. The tap is then reversed out of the completed hole.This system fits a 19.05mm (3/4") magnet drill arbor, or can be adapted for use with a 1/2" or 3/4" impact wrench.- Quick change system accepts all VersaDrive taps- Collets are pre-set to the appropriate clutch settings- Further Clutch adjustment options available- For blind hole tapping with VersaDrive Spiral Flute Taps- For use with variable speed, reversible magnet drill, pillar drill, or imapct wrench

GBP 349.99
1

HMT VersaDrive HSS-Cobalt Drill Bit 10.2mm (M12 Tap Size)

HMT VersaDrive HSS-Cobalt Drill Bit 10.2mm (M12 Tap Size)

VersaDrive Cobalt Drills are a premium grade 8% Cobalt drill bit with fully ground flutes, 135 Split point and Titanium coating for faster drilling & reduced wear. Suitable for heavy fabrication use, this Cobalt drill bit can also be used to drill stainless steel, mild steel, cast iron and a wide range of other structural materials.VersaDrive Drill Bits have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Fast drilling with minimal kickback- Dual hardened for impact wrench use up to 10mm- Precision Ground Flutes with easy chip clearance- 135 Split Point for easy starting and high accuracy- 8% Cobalt for long life and endurance- GoldMax low-friction titanium coating to stop burn out- High Strength, Non-Slip Shank DesignAdditional Information- Optimum life and performance when used with rotary pistol drills- Up to 10mm can be used on impact wrench & impact drivers for fast cutting performance- Suitable for harder materials such as stainless steel when used at reduced RPM- Use appropriate lubrication and correct RPM to achieve long tool life

GBP 29.99
1

HMT VersaDrive Spiral Flute ImpactaTap Set, M12, M16, M20, M24

HMT VersaDrive Spiral Flute ImpactaTap Set, M12, M16, M20, M24

VersaDrive Spiral Flute Taps are designed for tapping deep & blind holes and can be used with the VersaDrive Clutched collet or adapted for use in a reversible Magnet Drill, impact wrench or even used with any standard Hand Tap wrench.VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel. Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 459.99
1