17 results (0,14151 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

HMT Versadrive Drillsink Impactatap Set - M8 M10 M12

HMT Versadrive Drillsink Impactatap Set - M8 M10 M12

The VersaDrive DrillSink and ImpactaTap Combination Set contains tooling designed to speed up drilling, tapping and countersinking connection holes in metal. The VersaDrive Drillsink is an innovative combined drilling & countersinking tool to save metalworkers time & increase hole accuracy by drilling & then countersinking fixing holes in one operation. VersaDrive ImpactaTaps are the first range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.

GBP 299.99
1

HMT VersaDrive Rapid-Lock Clutched Tap Collet, M8-M12 Capacity

HMT VersaDrive Rapid-Lock Clutched Tap Collet, M8-M12 Capacity

The HMT VersaDrive Clutched tap collet system is a unique method of effectively threading blind holes. One collet works with the range of Patented VersaDrive taps. When the tap comes to the bottom of the hole, the clutch system will engage and stop the tap from breaking. The tap is then reversed out of the completed hole.This system fits a 19.05mm (3/4") magnet drill arbor, or can be adapted for use with a 1/2" or 3/4" impact wrench.- Quick change system accepts all VersaDrive taps- Collets are pre-set to the appropriate clutch settings- Further Clutch adjustment options available- For blind hole tapping with VersaDrive Spiral Flute Taps- For use with variable speed, reversible magnet drill, pillar drill, or imapct wrench

GBP 349.99
1

HMT VersaDrive Spiral Flute ImpactaTap Set, M12, M16, M20, M24

HMT VersaDrive Spiral Flute ImpactaTap Set, M12, M16, M20, M24

VersaDrive Spiral Flute Taps are designed for tapping deep & blind holes and can be used with the VersaDrive Clutched collet or adapted for use in a reversible Magnet Drill, impact wrench or even used with any standard Hand Tap wrench.VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel. Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 429.99
1

HMT VersaDrive ImpactaTap 4 Pc Set: M12, M16, M20, M24

HMT VersaDrive ImpactaTap 4 Pc Set: M12, M16, M20, M24

VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 309.99
1

HMT VersaDrive Spiral Flute ImpactaTap Set, M6, M8, M10, M12, M16

HMT VersaDrive Spiral Flute ImpactaTap Set, M6, M8, M10, M12, M16

VersaDrive Spiral Flute Taps are designed for tapping deep & blind holes and can be used with the VersaDrive Clutched collet or adapted for use in a reversible Magnet Drill, impact wrench or even used with any standard Hand Tap wrench.VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel. Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 339.99
1

HMT VersaDrive Combi Drill-Tap Set, M5, M6, M8, M10, M12

HMT VersaDrive Combi Drill-Tap Set, M5, M6, M8, M10, M12

VersaDrive Combi Drill Taps are a time saving solution for pilot drilling & tapping in one easy operation. The Titanium coating provides wear resistance and faster cutting performance. VersaDrive Sheet Metal Impacta-DrillTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. Recommended for use with Impact Drivers for high drilling and tapping productivity.

GBP 179.99
1

HMT VersaDrive ImpactaTap 5 Pc Set: M6, M8, M10, M12, M16

HMT VersaDrive ImpactaTap 5 Pc Set: M6, M8, M10, M12, M16

VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 219.99
1

HMT HSS SilverMax Weldon Twist Drill 10.2mm (M12 Tap Size) 10 Pack

HMT HSS SilverMax Weldon Twist Drill 10.2mm (M12 Tap Size) 10 Pack

HSS-XE twist drill bits with integrated magnet Weldon shank for simple and accurate drilling in steel and fast tool changing. Removes the need for using a separate drill chuck in a magnet drill. Where drilling smaller holes or tapping size holes has been a long and time consuming job in the past, fitting the Silvermax Magnet Twist Drills into a magnet drill can suddenly make the job far quicker and safer than struggling with a pistol drill and jobber drills.Features & Benefits- Integrated Weldon shank- Simple & Accurate drilling in steel- No need for a tool chuck when using a magnet drill- Fast tool changing- Quicker and safer than struggling with a pistol drill- Fits 19.05mm arbors - use with any standard mag drill

GBP 239.99
1

HMT VersaDrive HSS-Cobalt Drill Bit 10.2mm (M12 Tap Size) 10 Pack

HMT VersaDrive HSS-Cobalt Drill Bit 10.2mm (M12 Tap Size) 10 Pack

VersaDrive Cobalt Drills are a premium grade 8% Cobalt drill bit with fully ground flutes, 135 Split point and Titanium coating for faster drilling & reduced wear. Suitable for heavy fabrication use, this Cobalt drill bit can also be used to drill stainless steel, mild steel, cast iron and a wide range of other structural materials.VersaDrive Drill Bits have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Fast drilling with minimal kickback- Dual hardened for impact wrench use up to 10mm- Precision Ground Flutes with easy chip clearance- 135 Split Point for easy starting and high accuracy- 8% Cobalt for long life and endurance- GoldMax low-friction titanium coating to stop burn out- High Strength, Non-Slip Shank DesignAdditional Information- Optimum life and performance when used with rotary pistol drills- Up to 10mm can be used on impact wrench & impact drivers for fast cutting performance- Suitable for harder materials such as stainless steel when used at reduced RPM- Use appropriate lubrication and correct RPM to achieve long tool life

GBP 299.99
1

HMT VersaDrive Oversize Galv ImpactaTap 6 Pc Set: M5, M6, M8, M10, M12, M16

HMT VersaDrive Oversize Galv ImpactaTap 6 Pc Set: M5, M6, M8, M10, M12, M16

VersaDrive ImpactaTaps for Galvanised Bolts have an oversized thread to compensate for the increased thickness of coating found on galvanised steel fabrications or galvanised fixings. VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits

GBP 309.99
1

HMT VersaDrive ImpactaTap & TurboTip Set (328015) - 6.8/8.5/10.5/14mm TurboTip + M8, M10, M12, M16 Taps

HMT VersaDrive ImpactaTap & TurboTip Set (328015) - 6.8/8.5/10.5/14mm TurboTip + M8, M10, M12, M16 Taps

VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand. With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel. VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.

GBP 269.99
1

HMT VersaDrive ImpactaDie Kit Complete Including Adapter/Collar + M6, M8, M10, M12 Guides and Hex Die Nuts

HMT VersaDrive ImpactaDie Kit Complete Including Adapter/Collar + M6, M8, M10, M12 Guides and Hex Die Nuts

Create external threads quickly and easily with this unique patent-pending impact die system. Ideal for both creating/extending new threads, repairing existing damaged/deformed threads or cleaning old threads clogged with surface coatings, rust or other unwanted material that can prevent threads mating and turning properly. The guide collar system ensures that the thread cutting process runs straight and true. Once a thread is established, the flush type collar can be used. Patent Pending GB 2319619.9

GBP 309.99
1