152 results (0,18699 seconds)

Show all filters

Brand

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

HMT VersaDrive Rapid-Lock 1/2 Impact Wrench Adapter 10 Pack

HMT VersaDrive Rapid-Lock 1/2 Impact Wrench Adapter 10 Pack

This upgraded VersaDrive Impact Wrench adapter features: New Rapid-Lock, single handed loading action Improved Quick Release collar that prevents accidental tool release caused by vibrations or contact with the workpiece Knurled collar - ultimate grip in greasy or damp conditions High quality, Heavy Duty steel components Increased strength for withstanding the drive forces from the latest generation of high torque 1/2" Impact Wrenches Converts standard 1/2 Impact Wrenches for use with VersaDriveNotes.- Rated to 650nm- Supplied with retention ring and pin

GBP 569.99
1

HMT Cordless V36-18 Magnet Drill - 2 x 4.0AH Kit (Stakit)

HMT Cordless V36-18 Magnet Drill - 2 x 4.0AH Kit (Stakit)

HMT Cordless V36-18 Magnet Drill - 2 x 4.0AH Kit (Stakit) Increase your jobsite solutions with this unique cordless magdrill, the most compact & lightweight unit in its class. Market-leading 140mm stroke which is ideal for extra-long broach cutters and VersaDrive cutting tools. The 18V, 9Ah battery pack is compatible with the entire range of Makita LXT powertools. Permanent magnet provides safe & powerful hold, even on thin materials, eliminating any risk of power failure to the magnet.

GBP 1999.99
1

HMT Cordless RTV36-18 Magnet Drill - 2 x 4.0AH Kit (Stakit)

HMT Cordless RTV36-18 Magnet Drill - 2 x 4.0AH Kit (Stakit)

HMT Cordless RTV36-18 Magnet Drill - 2 x 4.0AH Kit (Stakit) Increase your jobsite solutions with this unique cordless magdrill, the most compact & lightweight unit in its class. Market-leading 140mm stroke which is ideal for extra-long broach cutters and VersaDrive cutting tools. The 18V, 9Ah battery pack is compatible with the entire range of Makita LXT powertools. Permanent magnet provides safe & powerful hold, even on thin materials, eliminating any risk of power failure to the magnet.

GBP 2399.99
1

HMT Cordless RTV36-18 Magnet Drill - 2 x 9.0AH Kit (Stakit)

HMT Cordless RTV36-18 Magnet Drill - 2 x 9.0AH Kit (Stakit)

HMT Cordless RTV36-18 Magnet Drill - 2 x 9.0AH Kit (Stakit) Increase your jobsite solutions with this unique cordless magdrill, the most compact & lightweight unit in its class. Market-leading 140mm stroke which is ideal for extra-long broach cutters and VersaDrive cutting tools. The 18V, 9Ah battery pack is compatible with the entire range of Makita LXT powertools. Permanent magnet provides safe & powerful hold, even on thin materials, eliminating any risk of power failure to the magnet.

GBP 2099.99
1

HMT VersaDrive Max Heavy Duty Impact Reamers - 1-1/2"

HMT VersaDrive Max Heavy Duty Impact Reamers - 1-1/2"

VersaDrive MAX reamers offer a heavy duty solution for enlarging and aligning holes in thick metal plate (e.g. 20mm and above) or at large diameters.Specially designed cutting geometry and a unique 20mm shank mean they can be used with high torque Impact Wrenches and the most powerful Magnet Drills for superior performance and portability, allowing the job to be completed onsite and not removed for reworking. Features & Benefits- Ideal for steel erection & bridge work- Ideal for modifying & enlarging holes- Use with high torque Impact Wrenches & high power, low speed Magnetic Drills- Unique 6 flute design for a faster, smoother cut- Prepare holes ready for TCB & friction grip bolts- Use with 1/2", 3/4" & 1" drive high power Impact Wrenches (1" drives require step-down adapter)

GBP 499.99
1

HMT VersaDrive ImpactaTap 1/2 - 13 UNC 10 Pack

HMT VersaDrive ImpactaTap 1/2 - 13 UNC 10 Pack

VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 799.99
1

HMT VersaDrive Impact Reamer 1/2" (12.7mm) 10 Pack

HMT VersaDrive Impact Reamer 1/2" (12.7mm) 10 Pack

VersaDrive reamers are the perfect hole alignment and enlarging tool for metalworkers & steel erectors for keeping the job moving when a hole is misaligned or the incorrect size for the fixing.Featuring a specially designed 6 flute cutting geometry and Titanium coating, VersaDrive Reamers are fully Impact rated and perform fastest when used with an Impact wrench providing ultimate cutting performance with virtually no powertool kickback.VersaDrive Reamers have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Precision 6-flute design for smooth cutting- Safer reaming with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy and long life- Goldmax low-friction titanium coating to stop burn-out- High strength, non-slip shank design- Use on Impact or Rotary

GBP 669.99
1

HMT VersaDrive Spiral Flute ImpactaTap 1/2 - 13 UNC 10 Pack

HMT VersaDrive Spiral Flute ImpactaTap 1/2 - 13 UNC 10 Pack

VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand. With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits-Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 919.99
1

HMT VersaDrive TurboTip Impact Drill Bit 1/2" 10 Pack

HMT VersaDrive TurboTip Impact Drill Bit 1/2" 10 Pack

VersaDrive TurboTip Impact drill bits are stepped tip bits that drill at twice the speed of standard bits without the need for pilot drilling while cutting a perfectly round hole. Turbocharge your drilling performance by using this revolutionary tool with an impact wrench or impact driver. Double hardened and titanium coated for faster drilling and reduced wear. VersaDrive TurboTip drill bits have a patented non-slip, Hex shank suitable for use in any standard 1/2" drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. Features & Benefits - Patented Drill Point- 50% Faster Drilling with 30% less pressure- Incredible Finished Hole quality- Instant drill start with no slipping- No snatch when drill bit breaks through- Fantastic Tool Life- Fully Impact Rated on structural steelAdditional Information- For fastest performance use on impact wrenches & impact drivers- For optimum life and accuracy use with pistol drills and magnet drills- Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools- Use appropriate lubrication and correct RPM to achieve long tool life

GBP 509.99
1

HMT VersaDrive Step Drill 3/16-1/2" (1/16" Increments) 10 Pack

HMT VersaDrive Step Drill 3/16-1/2" (1/16" Increments) 10 Pack

The first step drill optimised for use with impact wrenches & impact drivers allowing the user to create holes in seconds. Featuring a spiral flute design with self-starting drill tip, for fast, smooth drilling with a rotary drill or impact wrench and market leading 5mm thick drilling capacity. VersaDrive Step Drills have a patented non-slip, Hex shank suitable for use in any standard 1/2" drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Fast, smooth drilling with minimal kickback- Specially hardened for impact wrench use- Precision ground flutes with easy chip clearance -135 split point angle for easy starting & accuracy- GoldMax low-friction titanium coating to stop burn out- High strength, non-slip shank design

GBP 559.99
1

HMT VersaDrive Spiral Flute Combi Drill-Tap 1/2-13 UNC 10 Pack

HMT VersaDrive Spiral Flute Combi Drill-Tap 1/2-13 UNC 10 Pack

VersaDrive Combi Drill Taps are a time saving solution for pilot drilling & tapping in one easy operation. The Titanium coating provides wear resistance and faster cutting performance.VersaDrive Sheet Metal Impacta-DrillTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Recommended for use with Impact Drivers for high drilling and tapping productivity.Features & Benefits- Ground flute twist drill creates the perfect tapping hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Drill & Tap in one easy operation

GBP 549.99
1

HMT Versadrive Clutched Tapping Set M8-M12 Weldon 19mm (3/4") with 1/2" Impact Adapter

HMT Versadrive Clutched Tapping Set M8-M12 Weldon 19mm (3/4") with 1/2" Impact Adapter

The HMT VersaDrive Clutched tap collet system is a unique method of effectively threading blind holes. One collet works with the range of Patented VersaDrive taps. When the tap comes to the bottom of the hole, the clutch system will engage and stop the tap from breaking. The tap is then reversed out of the completed hole.This system fits a 19.05mm (3/4") magnet drill arbor, or can be adapted for use with a 1/2" or 3/4" impact wrench.- Quick change system accepts all VersaDrive taps- Collets are pre-set to the appropriate clutch settings- Further Clutch adjustment options available- For blind hole tapping with VersaDrive Spiral Flute Taps- For use with variable speed, reversible magnet drill, pillar drill, or imapct wrench

GBP 1499.99
1

HMT Versadrive Stakit Installation Kit - 31pc - Inch Sizes

HMT Versadrive Stakit Installation Kit - 31pc - Inch Sizes

The STAKIT Site Installation Kit combines an essential set of best-selling VersaDrive products to overcome all common site installation and steel erection holemaking challenges. Keeps the job moving when you find an unexpected challenge. Presented in the STAKIT Mid Case and connects to all Top cases and Base cases. Inch Kit Contents - 6 x TurboTips 1/4, 9/32, 5/16, 3/8, 7/16, 1/2" - 5 x HoleCutters 9/16, 5/8, 3/4, 7/8, 1" - 2 x ImpactaStep 9/16, 13/16" - 3 x DrillTaps 5/16, 3/8, 1/2" - 3 x ImpactaTaps 1/2, 5/8, 3/4" - 4 x Reamers 1/2, 9/16, 11/16, 13/16" - 1/4" Impact Driver Adapter - 1/2" Impact Wrench Adapter - Magnet Drill Adapter - 5" Extension - 12" Extension

GBP 1199.99
1

HMT VersaDrive ImpactaStep Cutter 5/16, 3/8, 7/16, 1/2, 9/16 10 PACK

HMT VersaDrive ImpactaStep Cutter 5/16, 3/8, 7/16, 1/2, 9/16 10 PACK

A VersaDrive exclusive innovation, the ImpactaStep Cutter offers combined drilling and reaming on materials up to 12mm thick. Featuring 5 individual cutting diameters and a straight flute design for strength and easy resharpening, the ImpactaStep Cutter is optimised for use with Impact Drivers and Impact Wrenches as well as the latest range of VersaDrive Premium Magnet Drills. VersaDrive ImpactaStep Cutters have a patented non-slip, Hex shank suitable for use in any standard 1/2" drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. Features & Benefits- 5 drill bits in one- Create & enlarge holes in materials up to 12mm thick- Safety breakthrough collar to prevent injury and damage- Fast, smooth drilling and reaming with minimal kickback- Specially hardened for impact wrench use- GoldMax low-friction titanium coating to stop burn out- High strength, non-slip shank design

GBP 1099.99
1