1.410 results (0,15615 seconds)

Show all filters

Brand

Size

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Gordon Measurement 3-6mm Mechanical Three Point Internal Micrometer Set

Gordon Measurement 3-6mm Mechanical Three Point Internal Micrometer Set

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Satin-chromed body - Supplied with Setting Rings and Extension Rods - Constant force ratchet stop to ensure consistent measurement - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Three Point Internal Micrometer Set -Range: 3-6mm; Heads count: 3 (3-4, 4-5, 5-6mm) -Setting Rings: 4, 5, 6

GBP 699.99
1

Gordon Measurement Steel Bevel Dial Indicator 1/4 x 0.001in

Gordon Measurement Steel Bevel Dial Indicator 1/4 x 0.001in

Types of Dial Indicator Dial Indicator is the plunger type indicator, Dial Test Indicator is known as the lever or finger indicator, both are available as digital versions. Configurations Graduation is the increment/division of measurement, Range is the total movement, Bezel diameter is the dial size, Dial scale is the range of one revolution, Dial Indicators can be single, or multi revolution with a rev counter, imperial or metric, Contact points are interchangeable with a range of profiles. Some of our indicators comes with detachable lug back fitting and built from satin-chromed body. Key Features - Highly durable with hardened stainless steel body - Adjustable dial bevel lock - Shock and dust proof - Lug back fitting (detachable, vary according to model) - Specific model has Tolerance Pointers - Portable, easy to store, easy to use, housed in a protective case Materials Hardened Stainless Steel, Glass, Plastic, Metal, Brass or Agate Specification -Stainless Steel Bevel Dial Indicator with Tolerance Pointers -Range & Grad.: 1/4 0.001"/Dial Dia.: 1.65"/Stem Dia.: 3/8" -Reading: 0-100

GBP 29.99
1

Gordon Measurement 3-4in Mechanical Outside Micrometer

Gordon Measurement 3-4in Mechanical Outside Micrometer

Product Description This external micrometer is highly accurate to a strictly minimal variance. For your confidence, it has undergone rigorous testing to guarantee consistent precision and quality. This micrometer is ideal for mechanical or engineering environments where precise dimension measurement is crucial. With anvils made of tungsten carbide, this micrometer is resistant to corrosion. The positive spindle lock holds the anvils in place to ensure an accurate recording of measurement. It has an adjustment spanner for easily resetting back to zero and comes in a tailor-made case for storage and easy carrying. Micrometers such as these are commonly used for maintenance work or engineering applications. It can measure the outer dimensions of an object such as a metal pipe or an electrical component. Key Features - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Spindle locking lever - Satin-chromed barrel and sleeve - Setting rods with models above 25mm/1 measure range (vary by model) - Constant force ratchet - Supplied in a storage case with adjustment spanner - No batteries required Specification -Mechanical Outside Micrometer -Range: 3-4"; Graduation: 0.0001"; Comply with Standard: BS 870

GBP 40.99
1

Gordon Measurement Magnetic V Block WMF - 120Kg

Gordon Measurement Magnetic V Block WMF - 120Kg

Product Description These stands hold dial indicators, plunger indicators, or lever-type test indicators in place, ensuring stability for accurate and repeatable measurements. The magnetic base, which can be activated or deactivated via a switch, allows the stand to be firmly attached to metal surfaces, making it convenient for use in various setups. The adjustability of the stand's arms ensures that the indicator can be positioned at the desired angle or height, while the strong magnetic base ensures stability during measurement. The ease of switching the magnet on and off allows quick repositioning without losing accuracy. These stands are essential tools in environments like machine shops, quality control labs, and inspection processes where precision is critical. Key Features - All working faces and V channel surfaces are accurately ground - Self-holding for work on any flat ferrous/metal surfaces - Magnetic forces are provided to upper, lower, side and V channel surfaces - Holds various shaped workpieces for light machining, inspection and correction - Permanent magnet operation with ON/OFF control - Powerful magnetic block, with on/off lever switch for magnet Specification -Magnetic V Block -Dimension H W L: 3 3/4" 2 3/4" 4" -Work magnetic force: 120kg

GBP 89.99
1

Gordon Measurement 75-100mm/3-4in Digital Outside Micrometer

Gordon Measurement 75-100mm/3-4in Digital Outside Micrometer

Product Description The external micrometer is highly accurate to a strictly minimal variance and has undergone rigorous testing to guarantee consistent precision and quality. The positive spindle lock holds the anvils in place to ensure an accurate recording of measurement. It has an adjustment spanner for easily resetting back to zero and comes in a tailor-made case for storage and easy carrying. Micrometers such as these are commonly used for maintenance work or engineering applications. It can measure the outer dimensions of an object such as a metal pipe or an electrical component. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Satin-chromed barrel and sleeve - Constant force Ratchet Stop to ensure consistent measurement - Spindle locking lever - Data output - Auto-power off - Shock and dust proof - Setting rods with models above 25mm/1 measure range (vary by model) - Supplied in a storage case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Outside Micrometer -Range: 75-100mm/3-4"; Accuracy: 0.003mm; Resolution: 0.001mm/0.00005"

GBP 99.99
1

Gordon Measurement 4-5in Mechanical Outside Micrometer

Gordon Measurement 4-5in Mechanical Outside Micrometer

Product Description This external micrometer is highly accurate to a strictly minimal variance. For your confidence, it has undergone rigorous testing to guarantee consistent precision and quality. This micrometer is ideal for mechanical or engineering environments where precise dimension measurement is crucial. With anvils made of tungsten carbide, this micrometer is resistant to corrosion. The positive spindle lock holds the anvils in place to ensure an accurate recording of measurement. It has an adjustment spanner for easily resetting back to zero and comes in a tailor-made case for storage and easy carrying. Micrometers such as these are commonly used for maintenance work or engineering applications. It can measure the outer dimensions of an object such as a metal pipe or an electrical component. Key Features - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Spindle locking lever - Satin-chromed barrel and sleeve - Setting rods with models above 25mm/1 measure range (vary by model) - Constant force ratchet - Supplied in a storage case with adjustment spanner - No batteries required Specification -Mechanical Outside Micrometer -Range: 4-5"; Graduation: 0.0001"; Comply with Standard: BS 870

GBP 44.99
1

Gordon Measurement 0-360 (4 x 90) Universal Dial Protractor

Gordon Measurement 0-360 (4 x 90) Universal Dial Protractor

Product Description Perfect precision tool for all your layout tasks. Whether you're a seasoned carpenter or a DIY enthusiast, this top-quality square is an essential addition to your toolbox. Its accurate measurements, angles, and markings ensure flawless results with every project. A well-made precision instrument finished in satin chrome and stainless steel. Key Features - Ideal for measuring and marking angles - Made of high quality hardened and ground stainless steel and non-ferrous metals for durability and resistance against machining shop wear, with satin-chromed finish - High accuracy dial indicator makes angle easy to read: The dial is divided into degrees and 5 minutes of arc (0.08 or 1/12th of a degree) - Dial indicator shows 10 degree per revolution: The small window in the dial displays graduations every 10 degrees which is equal to one revolution of the dial pointer - An inspection window reads a full 360 with four 90 sections - With fine adjustment and acute angle attachment - Supplied in a tailor made fitted case - Complete with 6, 8 & 12" stainless steel blades Specification -Universal Dial Protractor -Range: 4 90; Graduation: 5'

GBP 79.99
1

Gordon Measurement 4-5mm/0.157-0.197in Digital Three Point Internal Micrometer

Gordon Measurement 4-5mm/0.157-0.197in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 4-5mm/0.157-0.197"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 5mm; Extension: No

GBP 399.99
1

Gordon Measurement 3-4mm/0.118-0.157in Digital Three Point Internal Micrometer

Gordon Measurement 3-4mm/0.118-0.157in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 3-4mm/0.118-0.157"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 4mm; Extension: No

GBP 399.99
1

Gordon Measurement M112 Tungsten Carbide Gauge Block Set - Grade 2

Gordon Measurement M112 Tungsten Carbide Gauge Block Set - Grade 2

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Tungsten Carbide Gauge Block Set -M112, Grade 2 (Workshop Grade) , Comply with Standard: DIN 861 -Contains 112 Pieces of Small Blocks -Composition (mm) : -0.5, 1.0, 1.0005 (3 pcs) -1.001 - 1.009 (0.001 increments, 9 pcs) -1.01 - 1.49 (0.01 increments, 49 pcs) -1.5 - 25 (0.5 increments, 48 pcs) -50 - 100 (25.0 increments, 3 pcs)

GBP 1999.99
1

Gordon Measurement Metric Series Steel M112 Steel Gauge Block Set - Grade 0

Gordon Measurement Metric Series Steel M112 Steel Gauge Block Set - Grade 0

Product Description A set of gauge blocks, also known as gauge slips, made from high quality stress relieved and hardened alloy steel. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - High quality hardened steel for durable life - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Steel Gauge Block Set -M112, Grade 0 (Inspection Grade) , Comply with Standard: DIN 861 -Contains 112 Pieces of Small Blocks -Composition (mm) : -0.5, 1.0, 1.0005 (3 pcs) -1.001 - 1.009 (0.001 increments, 9 pcs) -1.01 - 1.49 (0.01 increments, 49 pcs) -1.5 - 25 (0.5 increments, 48 pcs) -50 - 100 (25.0 increments, 3 pcs)

GBP 1149.99
1

Gordon Measurement M112 Tungsten Carbide Gauge Block Set - Grade 1

Gordon Measurement M112 Tungsten Carbide Gauge Block Set - Grade 1

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Tungsten Carbide Gauge Block Set -M112, Grade 1 (Inspection Grade) , Comply with Standard: DIN 861 -Contains 112 Pieces of Small Blocks -Composition (mm) : -0.5, 1.0, 1.0005 (3 pcs) -1.001 - 1.009 (0.001 increments, 9 pcs) -1.01 - 1.49 (0.01 increments, 49 pcs) -1.5 - 25 (0.5 increments, 48 pcs) -50 - 100 (25.0 increments, 3 pcs)

GBP 2199.99
1

Gordon Measurement M112 Tungsten Carbide Gauge Block Set - Grade 0

Gordon Measurement M112 Tungsten Carbide Gauge Block Set - Grade 0

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Tungsten Carbide Gauge Block Set -M112, Grade 0 (Inspection Grade) , Comply with Standard: DIN 861 -Contains 112 Pieces of Small Blocks -Composition (mm) : -0.5, 1.0, 1.0005 (3 pcs) -1.001 - 1.009 (0.001 increments, 9 pcs) -1.01 - 1.49 (0.01 increments, 49 pcs) -1.5 - 25 (0.5 increments, 48 pcs) -50 - 100 (25.0 increments, 3 pcs)

GBP 2999.99
1

Gordon Measurement Metric Series Steel M112 Steel Gauge Block Set - Grade 2

Gordon Measurement Metric Series Steel M112 Steel Gauge Block Set - Grade 2

Product Description A set of gauge blocks, also known as gauge slips, made from high quality stress relieved and hardened alloy steel. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - High quality hardened steel for durable life - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Steel Gauge Block Set -M112, Grade 2 (Workshop Grade) , Comply with Standard: DIN 861 -Contains 112 Pieces of Small Blocks -Composition (mm) : -0.5, 1.0, 1.0005 (3 pcs) -1.001 - 1.009 (0.001 increments, 9 pcs) -1.01 - 1.49 (0.01 increments, 49 pcs) -1.5 - 25 (0.5 increments, 48 pcs) -50 - 100 (25.0 increments, 3 pcs)

GBP 469.99
1

Gordon Measurement Metric Series Steel M112 Steel Gauge Block Set - Grade 1

Gordon Measurement Metric Series Steel M112 Steel Gauge Block Set - Grade 1

Product Description A set of gauge blocks, also known as gauge slips, made from high quality stress relieved and hardened alloy steel. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - High quality hardened steel for durable life - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Steel Gauge Block Set -M112, Grade 1 (Inspection Grade) , Comply with Standard: DIN 861 -Contains 112 Pieces of Small Blocks -Composition (mm) : -0.5, 1.0, 1.0005 (3 pcs) -1.001 - 1.009 (0.001 increments, 9 pcs) -1.01 - 1.49 (0.01 increments, 49 pcs) -1.5 - 25 (0.5 increments, 48 pcs) -50 - 100 (25.0 increments, 3 pcs)

GBP 599.99
1

Gordon Measurement Imperial Series Steel E81 Steel Gauge Block Set - Grade 2

Gordon Measurement Imperial Series Steel E81 Steel Gauge Block Set - Grade 2

Product Description A set of gauge blocks, also known as gauge slips, made from high quality stress relieved and hardened alloy steel. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - High quality hardened steel for durable life - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Steel Gauge Block Set -E81, Grade 2 (Workshop Grade) , Comply with Standard: BS EN ISO 3650 -Contains 81 Pieces of Small Blocks -Composition (inch) : -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.149 (0.001 increments, 49 pcs) -0.05 - 0.95 (0.05 increments, 19 pcs) -1 - 4 (1.0 increments, 4 pcs)

GBP 329.99
1

Gordon Measurement Imperial Series Steel E81 Steel Gauge Block Set - Grade 0

Gordon Measurement Imperial Series Steel E81 Steel Gauge Block Set - Grade 0

Product Description A set of gauge blocks, also known as gauge slips, made from high quality stress relieved and hardened alloy steel. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - High quality hardened steel for durable life - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Steel Gauge Block Set -E81, Grade 0 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 81 Pieces of Small Blocks -Composition (inch) : -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.149 (0.001 increments, 49 pcs) -0.05 - 0.95 (0.05 increments, 19 pcs) -1 - 4 (1.0 increments, 4 pcs)

GBP 799.99
1

Gordon Measurement Imperial Series Steel E81 Steel Gauge Block Set - Grade 1

Gordon Measurement Imperial Series Steel E81 Steel Gauge Block Set - Grade 1

Product Description A set of gauge blocks, also known as gauge slips, made from high quality stress relieved and hardened alloy steel. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - High quality hardened steel for durable life - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Steel Gauge Block Set -E81, Grade 1 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 81 Pieces of Small Blocks -Composition (inch) : -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.149 (0.001 increments, 49 pcs) -0.05 - 0.95 (0.05 increments, 19 pcs) -1 - 4 (1.0 increments, 4 pcs)

GBP 449.99
1

Gordon Measurement 0-4in Mechanical Depth Micrometer

Gordon Measurement 0-4in Mechanical Depth Micrometer

Product Description The Depth Gauge Micrometer is highly accurate to a strictly minimal variance. For your confidence, it has undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. Key Features - Interchangeable rods enable wide-range measurement - Ground hardened depth gauge base for accurate location onto datum surface - Measuring rod lock - Flat measuring face - Ratchet Stop provides a constant measuring force - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Depth Gauge Micrometer -Range: 0-4"; Graduation: 0.001"; Comply with Standard: BS 870 -Base length: 101.5mm or 4"

GBP 63.99
1

Gordon Measurement E81 Tungsten Carbide Gauge Block Set - Grade 1

Gordon Measurement E81 Tungsten Carbide Gauge Block Set - Grade 1

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Tungsten Carbide Gauge Block Set -E81, Grade 1 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 81 Pieces of Small Blocks -Composition (inch) : -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.149 (0.001 increments, 49 pcs) -0.05 - 0.95 (0.05 increments, 19 pcs) -1 - 4 (1.0 increments, 4 pcs)

GBP 1899.99
1

Gordon Measurement E81 Tungsten Carbide Gauge Block Set - Grade 2

Gordon Measurement E81 Tungsten Carbide Gauge Block Set - Grade 2

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Tungsten Carbide Gauge Block Set -E81, Grade 2 (Workshop Grade) , Comply with Standard: BS EN ISO 3650 -Contains 81 Pieces of Small Blocks -Composition (inch) : -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.149 (0.001 increments, 49 pcs) -0.05 - 0.95 (0.05 increments, 19 pcs) -1 - 4 (1.0 increments, 4 pcs)

GBP 1699.99
1

Gordon Measurement E36 Tungsten Carbide Gauge Block Set - Grade 1

Gordon Measurement E36 Tungsten Carbide Gauge Block Set - Grade 1

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Tungsten Carbide Gauge Block Set -E36, Grade 1 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 36 Pieces of Small Blocks -Composition (inch) : -0.05, 1, 2, 4 (4 pcs) -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.109 (0.001 increments, 9 pcs) -0.11 - 0.19 (0.01 increments, 9 pcs) -0.1 - 0.5 (0.1 increments, 5 pcs)

GBP 1139.99
1