15 results (0,13679 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Gordon Measurement 100mm 0.0015mm Setting Ring

Gordon Measurement 100mm 0.0015mm Setting Ring

Product Description Setting Rings can be used to set Dial Bore Gauges, Holtests, the inside of Micrometers, and other bore measuring instruments accurately and quickly. All setting rings are engraved to 0.0001mm with the actual calibrated size. When selecting a measuring ring, please choose one that is closest in size to the dimension to be measured and that falls within the measuring range of your instrument. Key Features - Used for zero setting of Inside Micrometers, Three Points Internal Micrometers and Bore Gauges. - Durable alloy steel - Hardness of 62HRC - Housed in a protective case Specification -Metric Setting Ring -Size: 100mm/Accuracy: 0.0015mm -Cylindricity: 0.0015mm

GBP 209.99
1

Gordon Measurement Coarse Ring Gauge 6g Go M60 x 5.5

Gordon Measurement Coarse Ring Gauge 6g Go M60 x 5.5

Product Description Metric screw ring gauge is a gauge used to test a threaded shaft. The Go gauge must be able to be screwed on the threaded shaft without excessive force. The No Go gauge must not fit on the test item. These gauges are ideal for determining whether the actual thread of a test item is within a specified target range. Made from hardened alloy steel for longer tool life and durability from machine shop wear. Key Features - High quality hardened steel for durable tool life - Fine ground screw threads - Can identify either GO or NO GO Specification -Metric Coarse Screw Ring Gauge, ISO 6g, Go -Size (mm) : M60 5.5

GBP 189.99
1

Gordon Measurement Coarse Ring Gauge 6g No Go M60 x 5.5

Gordon Measurement Coarse Ring Gauge 6g No Go M60 x 5.5

Product Description Metric screw ring gauge is a gauge used to test a threaded shaft. The Go gauge must be able to be screwed on the threaded shaft without excessive force. The No Go gauge must not fit on the test item. These gauges are ideal for determining whether the actual thread of a test item is within a specified target range. Made from hardened alloy steel for longer tool life and durability from machine shop wear. Key Features - High quality hardened steel for durable tool life - Fine ground screw threads - Can identify either GO or NO GO Specification -Metric Coarse Screw Ring Gauge, ISO 6g, No Go -Size (mm) : M60 5.5

GBP 189.99
1

Gordon Measurement 4-5mm/0.157-0.197in Digital Three Point Internal Micrometer

Gordon Measurement 4-5mm/0.157-0.197in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 4-5mm/0.157-0.197"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 5mm; Extension: No

GBP 399.99
1

Gordon Measurement 8-10mm/0.315-0.394in Digital Three Point Internal Micrometer

Gordon Measurement 8-10mm/0.315-0.394in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 8-10mm/0.315-0.394"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 8mm; Extension: 100mm

GBP 339.99
1

Gordon Measurement 30-40mm/1.181-1.575in Digital Three Point Internal Micrometer

Gordon Measurement 30-40mm/1.181-1.575in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 30-40mm/1.181-1.575"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 40mm; Extension: 150mm

GBP 379.99
1

Gordon Measurement 16-20mm/0.630-0.787in Digital Three Point Internal Micrometer

Gordon Measurement 16-20mm/0.630-0.787in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 16-20mm/0.630-0.787"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 16mm; Extension: 150mm

GBP 349.99
1

Gordon Measurement 25-30mm/0.984-1.181in Digital Three Point Internal Micrometer

Gordon Measurement 25-30mm/0.984-1.181in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 25-30mm/0.984-1.181"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 25mm; Extension: 150mm

GBP 349.99
1

Gordon Measurement 40-50mm/1.575-1.969in Digital Three Point Internal Micrometer

Gordon Measurement 40-50mm/1.575-1.969in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 40-50mm/1.575-1.969"; Accuracy: 0.005mm/0.00020"; Resolution: 0.001mm/0.00005" -Setting Ring: 40mm; Extension: 150mm

GBP 379.99
1

Gordon Measurement 5-6mm/0.197-0.236in Digital Three Point Internal Micrometer

Gordon Measurement 5-6mm/0.197-0.236in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 5-6mm/0.197-0.236"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 6mm; Extension: No

GBP 399.99
1

Gordon Measurement 12-16mm/0.472-0.630in Digital Three Point Internal Micrometer

Gordon Measurement 12-16mm/0.472-0.630in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 12-16mm/0.472-0.630"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 16mm; Extension: 150mm

GBP 349.99
1

Gordon Measurement 20-25mm/0.787-0.984in Digital Three Point Internal Micrometer

Gordon Measurement 20-25mm/0.787-0.984in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 20-25mm/0.787-0.984"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 25mm; Extension: 150mm

GBP 349.99
1

Gordon Measurement 10-12mm/0.394-0.472in Digital Three Point Internal Micrometer

Gordon Measurement 10-12mm/0.394-0.472in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 10-12mm/0.394-0.472"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 10mm; Extension: 100mm

GBP 339.99
1

Gordon Measurement 3-4mm/0.118-0.157in Digital Three Point Internal Micrometer

Gordon Measurement 3-4mm/0.118-0.157in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 3-4mm/0.118-0.157"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 4mm; Extension: No

GBP 399.99
1

Gordon Measurement 6-8mm/0.236-0.315in Digital Three Point Internal Micrometer

Gordon Measurement 6-8mm/0.236-0.315in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 6-8mm/0.236-0.315"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 6mm; Extension: 100mm

GBP 339.99
1