mcb.dk | Få success online

Gordon Measurement 12-20mm Mechanical Three Point Internal Micrometer Set

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Satin-chromed body - Supplied with Setting Rings and Extension Rods - Constant force ratchet stop to ensure consistent measurement - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Three Point Internal Micrometer Set -Range: 12-20mm; Heads count: 2 (12-16, 16-20mm) -Setting Rings: 16

GBP 269.99

1

Gordon Measurement 0-300mm/0-12in Digital Depth Micrometer

Product Description The Depth Gauge Micrometer is highly accurate to a strictly minimal variance. For your confidence, it has undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. Key Features - Interchangeable rods enable wide-range measurement - Ground hardened depth gauge base for accurate location onto datum surface - Measuring rod lock - Flat measuring face - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Satin-chromed barrel and sleeve - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Depth Gauge Micrometer -Range: 0-300mm/0-12"; Accuracy: 0.005mm/0.00020"; Resolution: 0.001mm/0.00005" -Base length: 101.5mm or 4"

GBP 179.99

1

Gordon Measurement 40-50mm/1.575-1.969in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 40-50mm/1.575-1.969"; Accuracy: 0.005mm/0.00020"; Resolution: 0.001mm/0.00005" -Setting Ring: 40mm; Extension: 150mm

GBP 379.99

1

Gordon Measurement 12-16mm/0.472-0.630in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 12-16mm/0.472-0.630"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 16mm; Extension: 150mm

GBP 349.99

1

Gordon Measurement 4-5mm/0.157-0.197in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 4-5mm/0.157-0.197"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 5mm; Extension: No

GBP 399.99

1

Gordon Measurement 8-10mm/0.315-0.394in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 8-10mm/0.315-0.394"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 8mm; Extension: 100mm

GBP 339.99

1

Gordon Measurement 16-20mm/0.630-0.787in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 16-20mm/0.630-0.787"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 16mm; Extension: 150mm

GBP 349.99

1

Gordon Measurement 25-30mm/0.984-1.181in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 25-30mm/0.984-1.181"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 25mm; Extension: 150mm

GBP 349.99

1

Gordon Measurement 30-40mm/1.181-1.575in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 30-40mm/1.181-1.575"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 40mm; Extension: 150mm

GBP 379.99

1

Gordon Measurement 10-12mm/0.394-0.472in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 10-12mm/0.394-0.472"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 10mm; Extension: 100mm

GBP 339.99

1

Gordon Measurement 6-8mm/0.236-0.315in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 6-8mm/0.236-0.315"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 6mm; Extension: 100mm

GBP 339.99

1

Gordon Measurement 20-25mm/0.787-0.984in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 20-25mm/0.787-0.984"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 25mm; Extension: 150mm

GBP 349.99

1

Gordon Measurement 3-4mm/0.118-0.157in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 3-4mm/0.118-0.157"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 4mm; Extension: No

GBP 399.99

1

Gordon Measurement 5-6mm/0.197-0.236in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings and Extension Rods - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 5-6mm/0.197-0.236"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 6mm; Extension: No

GBP 399.99

1

Gordon Measurement 150-300mm Mechanical Interchangeable Anvil Micrometer

Product Description The external micrometer is highly accurate to a strictly minimal variance. For your confidence, it has undergone rigorous testing to guarantee consistent precision and quality. The external micrometer is ideal for mechanical or engineering environments where precise dimension measurement is crucial. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. The positive spindle lock holds the anvils in place to ensure an accurate recording of measurement. It has an adjustment spanner for easily resetting back to zero and comes in a tailor-made case for storage and easy carrying. Micrometers such as these are commonly used for maintenance work or engineering applications. It can measure the outer dimensions of an object such as a metal pipe or an electrical component. Key Features - Wide measuring range with interchangeable fixed anvils - High accuracy interchangeable anvils enable that reading does not need to be reset when change anvils - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Spindle locking lever - Satin-chromed barrel and sleeve - Setting rods with models above 25mm/1 measure range (vary by model) - Constant force ratchet - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Interchangeable Anvil Micrometer -Range: 150-300mm; Graduation: 0.01mm; Comply with Standard: DIN 863

GBP 209.99

1

Gordon Measurement 6-12in Mechanical Interchangeable Anvil Micrometer

Product Description The external micrometer is highly accurate to a strictly minimal variance. For your confidence, it has undergone rigorous testing to guarantee consistent precision and quality. The external micrometer is ideal for mechanical or engineering environments where precise dimension measurement is crucial. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. The positive spindle lock holds the anvils in place to ensure an accurate recording of measurement. It has an adjustment spanner for easily resetting back to zero and comes in a tailor-made case for storage and easy carrying. Micrometers such as these are commonly used for maintenance work or engineering applications. It can measure the outer dimensions of an object such as a metal pipe or an electrical component. Key Features - Wide measuring range with interchangeable fixed anvils - High accuracy interchangeable anvils enable that reading does not need to be reset when change anvils - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Spindle locking lever - Satin-chromed barrel and sleeve - Setting rods with models above 25mm/1 measure range (vary by model) - Constant force ratchet - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Interchangeable Anvil Micrometer -Range: 6-12"; Graduation: 0.001"; Comply with Standard: BS 870

GBP 209.99

1

Gordon Measurement 400-500mm Mechanical Adjustable Anvil Micrometer

Product Description The external micrometer is highly accurate to a strictly minimal variance. For your confidence, it has undergone rigorous testing to guarantee consistent precision and quality. The external micrometer is ideal for mechanical or engineering environments where precise dimension measurement is crucial. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. The positive spindle lock holds the anvils in place to ensure an accurate recording of measurement. It has an adjustment spanner for easily resetting back to zero and comes in a tailor-made case for storage and easy carrying. Micrometers such as these are commonly used for maintenance work or engineering applications. It can measure the outer dimensions of an object such as a metal pipe or an electrical component. Key Features - Pipe combined frame for light weight and high rigidity - Wide measuring range with adjustable anvils. - High accuracy standard collars enable that reading does not have to be reset when changing collars - Standard collars: 25mm or 1, 50mm or 2 - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Spindle locking lever - Satin-chromed barrel and sleeve - Setting rods with models above 25mm/1 measure range (vary by model) - Constant force ratchet - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Adjustable Anvil Micrometer -Range: 400-500mm; Graduation: 0.01mm; Comply with Standard: DIN 863

GBP 299.99

1

Gordon Measurement 16-20in Mechanical Adjustable Anvil Micrometer

Product Description The external micrometer is highly accurate to a strictly minimal variance. For your confidence, it has undergone rigorous testing to guarantee consistent precision and quality. The external micrometer is ideal for mechanical or engineering environments where precise dimension measurement is crucial. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. The positive spindle lock holds the anvils in place to ensure an accurate recording of measurement. It has an adjustment spanner for easily resetting back to zero and comes in a tailor-made case for storage and easy carrying. Micrometers such as these are commonly used for maintenance work or engineering applications. It can measure the outer dimensions of an object such as a metal pipe or an electrical component. Key Features - Pipe combined frame for light weight and high rigidity - Wide measuring range with adjustable anvils. - High accuracy standard collars enable that reading does not have to be reset when changing collars - Standard collars: 25mm or 1, 50mm or 2 - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Spindle locking lever - Satin-chromed barrel and sleeve - Setting rods with models above 25mm/1 measure range (vary by model) - Constant force ratchet - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Adjustable Anvil Micrometer -Range: 16-20"; Graduation: 0.001"; Comply with Standard: BS 870

GBP 299.99

1

Gordon Measurement 300-400mm Mechanical Adjustable Anvil Micrometer

Product Description The external micrometer is highly accurate to a strictly minimal variance. For your confidence, it has undergone rigorous testing to guarantee consistent precision and quality. The external micrometer is ideal for mechanical or engineering environments where precise dimension measurement is crucial. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. The positive spindle lock holds the anvils in place to ensure an accurate recording of measurement. It has an adjustment spanner for easily resetting back to zero and comes in a tailor-made case for storage and easy carrying. Micrometers such as these are commonly used for maintenance work or engineering applications. It can measure the outer dimensions of an object such as a metal pipe or an electrical component. Key Features - Pipe combined frame for light weight and high rigidity - Wide measuring range with adjustable anvils. - High accuracy standard collars enable that reading does not have to be reset when changing collars - Standard collars: 25mm or 1, 50mm or 2 - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Spindle locking lever - Satin-chromed barrel and sleeve - Setting rods with models above 25mm/1 measure range (vary by model) - Constant force ratchet - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Adjustable Anvil Micrometer -Range: 300-400mm; Graduation: 0.01mm; Comply with Standard: DIN 863

GBP 239.99

1

Gordon Measurement 20-24in Mechanical Adjustable Anvil Micrometer

Product Description The external micrometer is highly accurate to a strictly minimal variance. For your confidence, it has undergone rigorous testing to guarantee consistent precision and quality. The external micrometer is ideal for mechanical or engineering environments where precise dimension measurement is crucial. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. The positive spindle lock holds the anvils in place to ensure an accurate recording of measurement. It has an adjustment spanner for easily resetting back to zero and comes in a tailor-made case for storage and easy carrying. Micrometers such as these are commonly used for maintenance work or engineering applications. It can measure the outer dimensions of an object such as a metal pipe or an electrical component. Key Features - Pipe combined frame for light weight and high rigidity - Wide measuring range with adjustable anvils. - High accuracy standard collars enable that reading does not have to be reset when changing collars - Standard collars: 25mm or 1, 50mm or 2 - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Spindle locking lever - Satin-chromed barrel and sleeve - Setting rods with models above 25mm/1 measure range (vary by model) - Constant force ratchet - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Adjustable Anvil Micrometer -Range: 20-24"; Graduation: 0.001"; Comply with Standard: BS 870

GBP 359.99

1

Gordon Measurement 12-16in Mechanical Adjustable Anvil Micrometer

Product Description The external micrometer is highly accurate to a strictly minimal variance. For your confidence, it has undergone rigorous testing to guarantee consistent precision and quality. The external micrometer is ideal for mechanical or engineering environments where precise dimension measurement is crucial. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. The positive spindle lock holds the anvils in place to ensure an accurate recording of measurement. It has an adjustment spanner for easily resetting back to zero and comes in a tailor-made case for storage and easy carrying. Micrometers such as these are commonly used for maintenance work or engineering applications. It can measure the outer dimensions of an object such as a metal pipe or an electrical component. Key Features - Pipe combined frame for light weight and high rigidity - Wide measuring range with adjustable anvils. - High accuracy standard collars enable that reading does not have to be reset when changing collars - Standard collars: 25mm or 1, 50mm or 2 - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Spindle locking lever - Satin-chromed barrel and sleeve - Setting rods with models above 25mm/1 measure range (vary by model) - Constant force ratchet - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Adjustable Anvil Micrometer -Range: 12-16"; Graduation: 0.001"; Comply with Standard: BS 870

GBP 239.99

1

Gordon Measurement 600-700mm Mechanical Adjustable Anvil Micrometer

Product Description The external micrometer is highly accurate to a strictly minimal variance. For your confidence, it has undergone rigorous testing to guarantee consistent precision and quality. The external micrometer is ideal for mechanical or engineering environments where precise dimension measurement is crucial. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. The positive spindle lock holds the anvils in place to ensure an accurate recording of measurement. It has an adjustment spanner for easily resetting back to zero and comes in a tailor-made case for storage and easy carrying. Micrometers such as these are commonly used for maintenance work or engineering applications. It can measure the outer dimensions of an object such as a metal pipe or an electrical component. Key Features - Pipe combined frame for light weight and high rigidity - Wide measuring range with adjustable anvils. - High accuracy standard collars enable that reading does not have to be reset when changing collars - Standard collars: 25mm or 1, 50mm or 2 - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Spindle locking lever - Satin-chromed barrel and sleeve - Setting rods with models above 25mm/1 measure range (vary by model) - Constant force ratchet - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Adjustable Anvil Micrometer -Range: 600-700mm; Graduation: 0.01mm; Comply with Standard: DIN 863

GBP 429.99

1

Gordon Measurement 500-600mm Mechanical Adjustable Anvil Micrometer

Product Description The external micrometer is highly accurate to a strictly minimal variance. For your confidence, it has undergone rigorous testing to guarantee consistent precision and quality. The external micrometer is ideal for mechanical or engineering environments where precise dimension measurement is crucial. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. The positive spindle lock holds the anvils in place to ensure an accurate recording of measurement. It has an adjustment spanner for easily resetting back to zero and comes in a tailor-made case for storage and easy carrying. Micrometers such as these are commonly used for maintenance work or engineering applications. It can measure the outer dimensions of an object such as a metal pipe or an electrical component. Key Features - Pipe combined frame for light weight and high rigidity - Wide measuring range with adjustable anvils. - High accuracy standard collars enable that reading does not have to be reset when changing collars - Standard collars: 25mm or 1, 50mm or 2 - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Spindle locking lever - Satin-chromed barrel and sleeve - Setting rods with models above 25mm/1 measure range (vary by model) - Constant force ratchet - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Adjustable Anvil Micrometer -Range: 500-600mm; Graduation: 0.01mm; Comply with Standard: DIN 863

GBP 359.99

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)

Gordon Measurement 12-20mm Mechanical Three Point Internal Micrometer Set

Gordon Measurement 0-300mm/0-12in Digital Depth Micrometer

Gordon Measurement 40-50mm/1.575-1.969in Digital Three Point Internal Micrometer

Gordon Measurement 12-16mm/0.472-0.630in Digital Three Point Internal Micrometer

Gordon Measurement 4-5mm/0.157-0.197in Digital Three Point Internal Micrometer

Gordon Measurement 8-10mm/0.315-0.394in Digital Three Point Internal Micrometer

Gordon Measurement 16-20mm/0.630-0.787in Digital Three Point Internal Micrometer

Gordon Measurement 25-30mm/0.984-1.181in Digital Three Point Internal Micrometer

Gordon Measurement 30-40mm/1.181-1.575in Digital Three Point Internal Micrometer

Gordon Measurement 10-12mm/0.394-0.472in Digital Three Point Internal Micrometer

Gordon Measurement 6-8mm/0.236-0.315in Digital Three Point Internal Micrometer

Gordon Measurement 20-25mm/0.787-0.984in Digital Three Point Internal Micrometer

Gordon Measurement 3-4mm/0.118-0.157in Digital Three Point Internal Micrometer

Gordon Measurement 5-6mm/0.197-0.236in Digital Three Point Internal Micrometer

Gordon Measurement 150-300mm Mechanical Interchangeable Anvil Micrometer

Gordon Measurement 6-12in Mechanical Interchangeable Anvil Micrometer

Gordon Measurement 400-500mm Mechanical Adjustable Anvil Micrometer

Gordon Measurement 16-20in Mechanical Adjustable Anvil Micrometer

Gordon Measurement 300-400mm Mechanical Adjustable Anvil Micrometer

Gordon Measurement 20-24in Mechanical Adjustable Anvil Micrometer

Gordon Measurement 12-16in Mechanical Adjustable Anvil Micrometer

Gordon Measurement 600-700mm Mechanical Adjustable Anvil Micrometer

Gordon Measurement 500-600mm Mechanical Adjustable Anvil Micrometer

Powered by Cobiro