28 results (0,14087 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Gordon Measurement E8 Tungsten Carbide Micrometer Check Set - Grade 0

Gordon Measurement E8 Tungsten Carbide Micrometer Check Set - Grade 0

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in Grade 0 for Calibration, and Grade 1 for Inspection - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Tungsten Carbide Micrometer Check Set -E8, Grade 0 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 8 Pieces of Small Blocks -Composition (inch) : -0.130, 0.250, 0.385, 0.500, 0.615, 0.750, 0.870, 1.000

GBP 439.99
1

Gordon Measurement E11 Tungsten Carbide Micrometer Check Set - Grade 1

Gordon Measurement E11 Tungsten Carbide Micrometer Check Set - Grade 1

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in Grade 0 for Calibration, and Grade 1 for Inspection - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Tungsten Carbide Micrometer Check Set -E11, Grade 1 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 11 Pieces of Small Blocks -Composition (inch) : -0.130, 0.250, 0.385, 0.500, 0.615, 0.750, 0.870, 1.000, 2.000, 3.000, 4.000

GBP 729.99
1

Gordon Measurement E11 Tungsten Carbide Micrometer Check Set - Grade 0

Gordon Measurement E11 Tungsten Carbide Micrometer Check Set - Grade 0

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in Grade 0 for Calibration, and Grade 1 for Inspection - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Tungsten Carbide Micrometer Check Set -E11, Grade 0 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 11 Pieces of Small Blocks -Composition (inch) : -0.130, 0.250, 0.385, 0.500, 0.615, 0.750, 0.870, 1.000, 2.000, 3.000, 4.000

GBP 819.99
1

Gordon Measurement 50-100mm Mechanical Three Point Internal Micrometer Set

Gordon Measurement 50-100mm Mechanical Three Point Internal Micrometer Set

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Satin-chromed body - Supplied with Setting Rings and Extension Rods - Constant force ratchet stop to ensure consistent measurement - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Three Point Internal Micrometer Set -Range: 50-100mm; Heads count: 4 (50-63, 62-75, 75-88, 87-100mm) -Setting Rings: 62, 87

GBP 999.99
1

Gordon Measurement Imperial Series Steel E81 Steel Gauge Block Set - Grade 1

Gordon Measurement Imperial Series Steel E81 Steel Gauge Block Set - Grade 1

Product Description A set of gauge blocks, also known as gauge slips, made from high quality stress relieved and hardened alloy steel. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - High quality hardened steel for durable life - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Steel Gauge Block Set -E81, Grade 1 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 81 Pieces of Small Blocks -Composition (inch) : -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.149 (0.001 increments, 49 pcs) -0.05 - 0.95 (0.05 increments, 19 pcs) -1 - 4 (1.0 increments, 4 pcs)

GBP 449.99
1

Gordon Measurement Imperial Series Steel E81 Steel Gauge Block Set - Grade 0

Gordon Measurement Imperial Series Steel E81 Steel Gauge Block Set - Grade 0

Product Description A set of gauge blocks, also known as gauge slips, made from high quality stress relieved and hardened alloy steel. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - High quality hardened steel for durable life - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Steel Gauge Block Set -E81, Grade 0 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 81 Pieces of Small Blocks -Composition (inch) : -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.149 (0.001 increments, 49 pcs) -0.05 - 0.95 (0.05 increments, 19 pcs) -1 - 4 (1.0 increments, 4 pcs)

GBP 829.99
1

Gordon Measurement 6-12mm Mechanical Three Point Internal Micrometer Set

Gordon Measurement 6-12mm Mechanical Three Point Internal Micrometer Set

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Satin-chromed body - Supplied with Setting Rings and Extension Rods - Constant force ratchet stop to ensure consistent measurement - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Three Point Internal Micrometer Set -Range: 6-12mm; Heads count: 3 (6-8, 8-10, 10-12mm) -Setting Rings: 6, 8, 10

GBP 499.99
1

Gordon Measurement 3-6mm Mechanical Three Point Internal Micrometer Set

Gordon Measurement 3-6mm Mechanical Three Point Internal Micrometer Set

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Satin-chromed body - Supplied with Setting Rings and Extension Rods - Constant force ratchet stop to ensure consistent measurement - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Three Point Internal Micrometer Set -Range: 3-6mm; Heads count: 3 (3-4, 4-5, 5-6mm) -Setting Rings: 4, 5, 6

GBP 699.99
1

Gordon Measurement 20-50mm Mechanical Three Point Internal Micrometer Set

Gordon Measurement 20-50mm Mechanical Three Point Internal Micrometer Set

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Satin-chromed body - Supplied with Setting Rings and Extension Rods - Constant force ratchet stop to ensure consistent measurement - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Three Point Internal Micrometer Set -Range: 20-50mm; Heads count: 4 (20-25, 25-30, 30-40, 40-50mm) -Setting Rings: 25, 40

GBP 729.99
1

Gordon Measurement E81 Tungsten Carbide Gauge Block Set - Grade 2

Gordon Measurement E81 Tungsten Carbide Gauge Block Set - Grade 2

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Tungsten Carbide Gauge Block Set -E81, Grade 2 (Workshop Grade) , Comply with Standard: BS EN ISO 3650 -Contains 81 Pieces of Small Blocks -Composition (inch) : -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.149 (0.001 increments, 49 pcs) -0.05 - 0.95 (0.05 increments, 19 pcs) -1 - 4 (1.0 increments, 4 pcs)

GBP 1699.99
1

Gordon Measurement E81 Tungsten Carbide Gauge Block Set - Grade 1

Gordon Measurement E81 Tungsten Carbide Gauge Block Set - Grade 1

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Tungsten Carbide Gauge Block Set -E81, Grade 1 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 81 Pieces of Small Blocks -Composition (inch) : -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.149 (0.001 increments, 49 pcs) -0.05 - 0.95 (0.05 increments, 19 pcs) -1 - 4 (1.0 increments, 4 pcs)

GBP 1899.99
1

Gordon Measurement E81 Tungsten Carbide Gauge Block Set - Grade 0

Gordon Measurement E81 Tungsten Carbide Gauge Block Set - Grade 0

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Tungsten Carbide Gauge Block Set -E81, Grade 0 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 81 Pieces of Small Blocks -Composition (inch) : -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.149 (0.001 increments, 49 pcs) -0.05 - 0.95 (0.05 increments, 19 pcs) -1 - 4 (1.0 increments, 4 pcs)

GBP 2599.99
1

Gordon Measurement E36 Tungsten Carbide Gauge Block Set - Grade 1

Gordon Measurement E36 Tungsten Carbide Gauge Block Set - Grade 1

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Tungsten Carbide Gauge Block Set -E36, Grade 1 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 36 Pieces of Small Blocks -Composition (inch) : -0.05, 1, 2, 4 (4 pcs) -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.109 (0.001 increments, 9 pcs) -0.11 - 0.19 (0.01 increments, 9 pcs) -0.1 - 0.5 (0.1 increments, 5 pcs)

GBP 1199.99
1

Gordon Measurement Imperial Series Steel E36 Steel Gauge Block Set - Grade 0

Gordon Measurement Imperial Series Steel E36 Steel Gauge Block Set - Grade 0

Product Description A set of gauge blocks, also known as gauge slips, made from high quality stress relieved and hardened alloy steel. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - High quality hardened steel for durable life - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Steel Gauge Block Set -E36, Grade 0 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 36 Pieces of Small Blocks -Composition (inch) : -0.05, 1, 2, 4 (4 pcs) -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.109 (0.001 increments, 9 pcs) -0.11 - 0.19 (0.01 increments, 9 pcs) -0.1 - 0.5 (0.1 increments, 5 pcs)

GBP 439.99
1

Gordon Measurement E36 Tungsten Carbide Gauge Block Set - Grade 2

Gordon Measurement E36 Tungsten Carbide Gauge Block Set - Grade 2

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Tungsten Carbide Gauge Block Set -E36, Grade 2 (Workshop Grade) , Comply with Standard: BS EN ISO 3650 -Contains 36 Pieces of Small Blocks -Composition (inch) : -0.05, 1, 2, 4 (4 pcs) -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.109 (0.001 increments, 9 pcs) -0.11 - 0.19 (0.01 increments, 9 pcs) -0.1 - 0.5 (0.1 increments, 5 pcs)

GBP 999.99
1

Gordon Measurement E36 Tungsten Carbide Gauge Block Set - Grade 0

Gordon Measurement E36 Tungsten Carbide Gauge Block Set - Grade 0

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Tungsten Carbide Gauge Block Set -E36, Grade 0 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 36 Pieces of Small Blocks -Composition (inch) : -0.05, 1, 2, 4 (4 pcs) -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.109 (0.001 increments, 9 pcs) -0.11 - 0.19 (0.01 increments, 9 pcs) -0.1 - 0.5 (0.1 increments, 5 pcs)

GBP 1539.99
1

Gordon Measurement 70-100mm/2.8-4in Digital Three Point Internal Micrometer

Gordon Measurement 70-100mm/2.8-4in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large measuring range without changing the anvil due to the patent structure - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings, Extension Rods and other setting tools - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 70-100mm/2.8-4"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 70mm; Extension: 150mm

GBP 539.99
1

Gordon Measurement 100-150mm/4.0-6in Digital Three Point Internal Micrometer

Gordon Measurement 100-150mm/4.0-6in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large measuring range without changing the anvil due to the patent structure - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings, Extension Rods and other setting tools - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 100-150mm/4.0-6"; Accuracy: 0.005mm/0.00020"; Resolution: 0.001mm/0.00005" -Setting Ring: 100mm; Extension: 150mm

GBP 849.99
1

Gordon Measurement 1000mm/40in Heavy Duty Digital Caliper

Gordon Measurement 1000mm/40in Heavy Duty Digital Caliper

Product Description A heavy duty digital caliper is a robust, precision measuring tool designed to handle larger or more rugged applications where standard calipers might not suffice. It is built for measuring large objects, materials, or components in industrial settings like manufacturing, metalworking, and construction. Its durable construction allows it to withstand tougher environments and handle bigger measurement tasks while maintaining high accuracy. Key Features - Ideal for measuring external and internal dimensions - With Fine adjustment thumb wheel - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Can fast-search maximum and minimum values - Preset memory and zero reset at any position - Accuracy conforms to relevant DIN/BS standards - Data output - Auto-power off - Body made of high-grade hardened and ground stainless steel for greater durability and resistance against machine shop wear - With clamping screw on the slider for locking the measuring jaws in place, ensuring accurate and stable readings - Shock and dust proof - Supplied in a tailor made fitted storage case - Battery included and the instrument is ready to use Specification -Electronic Digital Heavy Duty Vernier Caliper -Range: 1000mm/40"; Resolution: 0.01mm/0.0005"; Accuracy: 0.02+0.00005L mm (L: the length from the origin to the given position) ; Jaw Depth: 150mm -Comply with Standard: DIN 861

GBP 519.99
1

Gordon Measurement 50-70mm/2.0-2.8in Digital Three Point Internal Micrometer

Gordon Measurement 50-70mm/2.0-2.8in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large measuring range without changing the anvil due to the patent structure - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings, Extension Rods and other setting tools - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 50-70mm/2.0-2.8"; Accuracy: 0.004mm/0.00016"; Resolution: 0.001mm/0.00005" -Setting Ring: 50mm; Extension: 150mm

GBP 449.99
1

Gordon Measurement 150-250mm/6.0-10in Digital Three Point Internal Micrometer

Gordon Measurement 150-250mm/6.0-10in Digital Three Point Internal Micrometer

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Large measuring range without changing the anvil due to the patent structure - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Constant force Ratchet Stop to ensure consistent measurement - Data output - Auto-power off - Shock and dust proof - Supplied with Setting Rings, Extension Rods and other setting tools - House in a fitted case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Three Point Internal Micrometer -Range: 150-250mm/6.0-10"; Accuracy: 0.005mm/0.00020"; Resolution: 0.001mm/0.00005" -Setting Ring: 150mm; Extension: 150mm

GBP 1799.99
1

Gordon Measurement 900-1000mm Mechanical Adjustable Anvil Micrometer

Gordon Measurement 900-1000mm Mechanical Adjustable Anvil Micrometer

Product Description The external micrometer is highly accurate to a strictly minimal variance. For your confidence, it has undergone rigorous testing to guarantee consistent precision and quality. The external micrometer is ideal for mechanical or engineering environments where precise dimension measurement is crucial. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. The positive spindle lock holds the anvils in place to ensure an accurate recording of measurement. It has an adjustment spanner for easily resetting back to zero and comes in a tailor-made case for storage and easy carrying. Micrometers such as these are commonly used for maintenance work or engineering applications. It can measure the outer dimensions of an object such as a metal pipe or an electrical component. Key Features - Pipe combined frame for light weight and high rigidity - Wide measuring range with adjustable anvils. - High accuracy standard collars enable that reading does not have to be reset when changing collars - Standard collars: 25mm or 1, 50mm or 2 - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Spindle locking lever - Satin-chromed barrel and sleeve - Setting rods with models above 25mm/1 measure range (vary by model) - Constant force ratchet - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Adjustable Anvil Micrometer -Range: 900-1000mm; Graduation: 0.01mm; Comply with Standard: DIN 863

GBP 599.99
1

Gordon Measurement 800-900mm Mechanical Adjustable Anvil Micrometer

Gordon Measurement 800-900mm Mechanical Adjustable Anvil Micrometer

Product Description The external micrometer is highly accurate to a strictly minimal variance. For your confidence, it has undergone rigorous testing to guarantee consistent precision and quality. The external micrometer is ideal for mechanical or engineering environments where precise dimension measurement is crucial. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. The positive spindle lock holds the anvils in place to ensure an accurate recording of measurement. It has an adjustment spanner for easily resetting back to zero and comes in a tailor-made case for storage and easy carrying. Micrometers such as these are commonly used for maintenance work or engineering applications. It can measure the outer dimensions of an object such as a metal pipe or an electrical component. Key Features - Pipe combined frame for light weight and high rigidity - Wide measuring range with adjustable anvils. - High accuracy standard collars enable that reading does not have to be reset when changing collars - Standard collars: 25mm or 1, 50mm or 2 - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Spindle locking lever - Satin-chromed barrel and sleeve - Setting rods with models above 25mm/1 measure range (vary by model) - Constant force ratchet - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Adjustable Anvil Micrometer -Range: 800-900mm; Graduation: 0.01mm; Comply with Standard: DIN 863

GBP 519.99
1

Gordon Measurement 700-800mm Mechanical Adjustable Anvil Micrometer

Gordon Measurement 700-800mm Mechanical Adjustable Anvil Micrometer

Product Description The external micrometer is highly accurate to a strictly minimal variance. For your confidence, it has undergone rigorous testing to guarantee consistent precision and quality. The external micrometer is ideal for mechanical or engineering environments where precise dimension measurement is crucial. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. The positive spindle lock holds the anvils in place to ensure an accurate recording of measurement. It has an adjustment spanner for easily resetting back to zero and comes in a tailor-made case for storage and easy carrying. Micrometers such as these are commonly used for maintenance work or engineering applications. It can measure the outer dimensions of an object such as a metal pipe or an electrical component. Key Features - Pipe combined frame for light weight and high rigidity - Wide measuring range with adjustable anvils. - High accuracy standard collars enable that reading does not have to be reset when changing collars - Standard collars: 25mm or 1, 50mm or 2 - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Spindle locking lever - Satin-chromed barrel and sleeve - Setting rods with models above 25mm/1 measure range (vary by model) - Constant force ratchet - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Adjustable Anvil Micrometer -Range: 700-800mm; Graduation: 0.01mm; Comply with Standard: DIN 863

GBP 469.99
1

Gordon Measurement 800-900mm/32-36in Digital Adjustable Anvil Micrometer

Gordon Measurement 800-900mm/32-36in Digital Adjustable Anvil Micrometer

Product Description The external micrometer is highly accurate to a strictly minimal variance and has undergone rigorous testing to guarantee consistent precision and quality. The positive spindle lock holds the anvils in place to ensure an accurate recording of measurement. It has an adjustment spanner for easily resetting back to zero and comes in a tailor-made case for storage and easy carrying. Micrometers such as these are commonly used for maintenance work or engineering applications. It can measure the outer dimensions of an object such as a metal pipe or an electrical component. Key Features - Pipe combined frame for light weight and high rigidity - Wide measuring range with adjustable anvils. - High accuracy standard collars enable that reading does not have to be reset when changing collars - Standard collars: 25mm or 1, 50mm or 2 - Large LCD display with digital read-out - Dual scale: convertible between metric and imperial units (mm/inch) - Has Data hold, ABS (Absolute) /INC (Incremental) and Tolerance modes (vary by model) - Preset memory and zero reset at any position - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Satin-chromed barrel and sleeve - Constant force Ratchet Stop to ensure consistent measurement - Spindle locking lever - Data output - Auto-power off - Shock and dust proof - Setting rods with models above 25mm/1 measure range (vary by model) - Supplied in a storage case with adjustment spanner - Battery included and the instrument is ready to use Specification -Electronic Digital Adjustable Anvil Micrometer -Range: 800-900mm/32-36"; Accuracy: 0.020mm; Resolution: 0.001mm/0.00005" -Standard collars: 25mm/1", 50mm/2"

GBP 539.99
1