7 results (0,13840 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Gedore Tool set BASIS tools 1/1 CT-module 23pcs

Gedore Tool set BASIS tools 1/1 CT-module 23pcs

suitable for tool trolley MECHANIC, WINGMAN 2054.10 / 2057.10 Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, 2-component-handle, forged Bent nose telephone pliers, straight: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, 2-component-handle, chrome-vanadium steel Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated 2C screwdriver: Slot and cross-slotted PH, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle 2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle Engineers hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel Cross-cut chisel: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel

GBP 259.99
1

Gedore Tool set ALL-IN loose 108pcs

Gedore Tool set ALL-IN loose 108pcs

Ratchet 1/2" Extension 1/2" 125 250 mm Universal joint 1/2" Socket 1/2" hexagon 8 10 11 12 13 14 15 16 17 18 19 22 24 27 30 32 mm Holding rail 8" Adaptor 1/2" for holding rail Ratchet 1/4" Extension 1/4" 100 mm Socket 1/4" hexagon 4 4.5 5 5.5 6 7 8 9 10 11 12 13 14 mm Bit-Box, 31 pieces Ratchet wrench, metric: Following DIN 3113, ISO 3318, straight form, jaw position 15, surface satin matt chrome plated, chrome vanadium steel Engineers hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, 2-component-handle, chrome-vanadium steel Power side cutter: To DIN ISO 5749, high degree of cutting performance, inductively hardened, long cutting edges, 2-component-handle, chrome-vanadium steel Bent nose telephone pliers, straight: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, 2-component-handle, chrome-vanadium steel Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II 2C screwdriver: Slot and cross-slotted PH, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle Hexagon socket key: To DIN ISO 2936, hardened throughout, chrome-vanadium steel, phosphated, in holder Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel Utility knife: Blade 18 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades (100mm long, 0.4mm thick), with sharpener Bit box: Drive adaptor with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 - C 6.3, machine operated, phosphated, plastic box Bit screwdriver: 2-component-handle, hex recess drive to DIN 3126 - D 6.3 (1/4") for bits, magnet, elongated hole in the handle, chrome-vanadium steel

GBP 429.99
1

Gedore Tool set 8xCT modules +cutter 81pcs

Gedore Tool set 8xCT modules +cutter 81pcs

suitable for tool trolley MECHANIC 2046.10 / 2046.20 Coupler in acc. with DIN 3120, ISO 1174, with ball locking device Square drive as per DIN 3120, ISO 1174, with ball retention groove 2C reversible ratchet 1/2": To DIN 3120 - A 12.5, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, 2-component-handle Socket extension 1/2" Sliding T bar 1/2", with slide, to DIN 3122, ISO 3315 Universal joint 1/2": Joint bolted on, design to DIN 3123 - C 12.5 Chrome-vanadium steel, matt satin chrome-plated Square drive as per DIN 3120, ISO 1174, with ball retention groove Socket, hex: Metric, short, to DIN 3124, ISO 272 Screwdriver bit socket 1/2" for in-hex screws: Pressed-in, phosphated pin Chrome-vanadium steel, matt satin chrome-plated For hand-operated screw work Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15 jaw position, surface matt satin, plate-chromed Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated Chrome-vanadium steel Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, 2-component-handle, forged Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, 2-component-handle, forged Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, 2-component-handle, forged Engineers hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Flat cold chisel, flat oval: To DIN, cutting edge and head ground, impact end tempered, chrome-vanadium steel Cross-cut chisel, flat oval: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel 2C screwdriver slotted and PH: To DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle 2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle Utility knife: Blade 25 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades

GBP 499.99
1

Gedore Tool set 11xCT modules +var.tools 166pcs

Gedore Tool set 11xCT modules +var.tools 166pcs

Socket wrench tools: Coupler in acc. with DIN 3120, ISO 1174, with ball locking device Square drive as per DIN 3120, ISO 1174, with ball retention groove Chrome-vanadium steel, matt satin chrome-plated 2C reversible ratchet 1/4": To DIN 3120 - A 6.3, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, 2-component-handle Square plug-in handle 1/4", 1-component handle with female square Socket 1/4" hexagon: Metric, short, to DIN 3124, ISO 2725 Screwdriver bit socket 1/4" for in-hex screws: Pressed-in, phosphated pin Screwdriver bit socket 1/4" slotted, PH, PZ, TX with drill hole: Pressed-in, phosphated pin Socket extension 1/4" Sliding T-handle with slide 1/4": Acc. to DIN 3122, ISO 3315 Universal joint 1/4": Joint bolted on, design to DIN 3123 - C 6.3 2C reversible ratchet 1/2": To DIN 3120 - A 12.5, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, 2-component-handle Socket extension 1/2" Sliding T bar 1/2", with slide, to DIN 3122, ISO 3315 Universal joint 1/2": Joint bolted on, design to DIN 3123 - C 12.5 Socket, hex: Metric, short, to DIN 3124, ISO 272 Screwdriver bit socket 1/2" for in-hex screws: Pressed-in, phosphated pin Ratchet wrenches: Based on DIN 3113, ISO 3318, ring offset 15, reversible for right and left-hand operation, 15 jaw position, surface matt satin chrome-plated Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated Chrome-vanadium steel Flat ring spanner: To DIN 838, ISO 3318, ISO 1085, ISO 10104, 5 offset, chrome vanadium steel, surface matt satin, chrome-plated Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, 2-component-handle, forged Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, 2-component-handle, forged Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, 2-component-handle, forged Circlip pliers: To DIN 5254 Form A, straight precision tips, opening spring, DIN 471 for retaining rings, DIN 983 Acc. to DIN 5254 Form B, angled precision tips, opening spring, DIN 471 for retaining rings, DIN 983 Acc. to DIN 5256 Form C, straight precision tips, opening spring, DIN 472 for retaining rings, DIN 984 Acc. to DIN 5256 Form D, 90 angled precision tips, DIN 472 for retaining rings, DIN 984

GBP 1099.99
1

Gedore Tool set 8xCT modules 119pcs

Gedore Tool set 8xCT modules 119pcs

suitable for tool trolley MECHANIC 2046.10 / 2046.20 Square plug-in handle 1/4", 1-component handle with female square Socket 1/4" hexagon: Metric, short, to DIN 3124, ISO 2725 Screwdriver bit socket 1/4" for in-hex screws: Pressed-in, phosphated pin Screwdriver bit socket 1/4" slotted, PH, PZ, TX with drill hole: Pressed-in, phosphated pin Socket extension 1/4" Sliding T-handle with slide 1/4": Acc. to DIN 3122, ISO 3315 Universal joint 1/4": Joint bolted on, design to DIN 3123 - C 6.3 2C reversible ratchet 1/2": To DIN 3120 - A 12.5, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, 2-component-handle Socket extension 1/2" Sliding T bar 1/2", with slide, to DIN 3122, ISO 3315 Universal joint 1/2": Joint bolted on, design to DIN 3123 - C 12.5 Socket, hex: Metric, short, to DIN 3124, ISO 272 Screwdriver bit socket 1/2" for in-hex screws: Pressed-in, phosphated pin Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15 jaw position, surface matt satin, plate-chromed Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated Chrome-vanadium steel Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, 2-component-handle, forged Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, 2-component-handle, forged Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, 2-component-handle, forged Engineers hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Flat cold chisel, flat oval: To DIN, cutting edge and head ground, impact end tempered, chrome-vanadium steel Cross-cut chisel, flat oval: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel 2C screwdriver slotted and PH: To DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle 2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II

GBP 599.99
1

Gedore Tool set 3xCT-modules 129pcs

Gedore Tool set 3xCT-modules 129pcs

suitable for tool trolley MECHANIC, WINGMAN 2054.10 / 2057.10 Coupler in acc. with DIN 3120, ISO 1174, with ball locking device Square drive as per DIN 3120, ISO 1174, with ball retention groove 2C reversible ratchet 1/4" + 1/2": lever for reversible right and left hand operation, push button release, fine-toothed, oval head, dual-meterial handle, hands-friendliy transfer of force, for sockets Square plug-in handle 1/4", 1-component handle with female square Socket wrench insert 1/4" 1/2": hexagon, metric, short and long version according to DIN 3124, ISO 2725 Spark plug socket 1/2" with pressed-in holding rubber Spark plug socket 1/2" with pressed-in holding rubber and extra drive hex Size 24 Screwdriver bit socket 1/4" 1/2", for hexagon socket screws: With pressed-in, phosphated pin Screwdriver bit socket 1/4", slotted, PH, PZ, TX with hole: With pressed-in, phosphated pin Cross handle with sliding piece 1/4" 1/2": Design according to DIN 3122, ISO 3315 Socket extension 1/4"+ 1/2" Universal joint 1/4" 1/2": joint screwed, design according to DIN 3123 - C 12.5 Adjustable wrench, 15 jaw position, head polished with laser-marked scale Chrome-vanadium steel, matt satin chrome-plated Ring ratchet open-end wrench: Following DIN 3113, ISO 3318, straight form, ratchet mechanism with 72 teeth, swing back angle 5, jaw position 15, surface satin matt chrome-plated, chrome-vanadium steel Double open-ended spanners: Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102, jaw set at 15, matt satin chrome-plated finish, chrome-vanadium steel Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, 2-component-handle, chrome-vanadium steel Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, 2-component-handle, forged Bent nose telephone pliers, straight: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, 2-component-handle, chrome-vanadium steel Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated 2C screwdriver: Slot and cross-slotted PH, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle 2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle Engineers hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel Cross-cut chisel: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel

GBP 849.99
1