36 results (0,18101 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Faithfull Stone Cut Off Disc 100 x 3.2 x 16mm FAI1003S

Faithfull Stone Cut Off Disc 100 x 3.2 x 16mm FAI1003S

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work

GBP 3.49
1

Faithfull Stone Cut Off Disc 230 x 3.2 x 22.23mm FAI2303S

Faithfull Stone Cut Off Disc 230 x 3.2 x 22.23mm FAI2303S

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work

GBP 3.39
1

Faithfull Stone Cut Off Disc 115 x 3.2 x 22.23mm FAI1153S

Faithfull Stone Cut Off Disc 115 x 3.2 x 22.23mm FAI1153S

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work

GBP 2.09
1

Faithfull Stone Cut Off Disc 180 x 3.2 x 22.23mm FAI1803S

Faithfull Stone Cut Off Disc 180 x 3.2 x 22.23mm FAI1803S

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work

GBP 3.19
1

Faithfull Stone Cut Off Disc 125 x 3.2 x 22.23mm FAI1253S

Faithfull Stone Cut Off Disc 125 x 3.2 x 22.23mm FAI1253S

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work

GBP 1.79
1

Faithfull Depressed Centre Stone Grinding Disc 115 x 6 x 22.23mm FAI1156SDG

Faithfull Depressed Centre Stone Grinding Disc 115 x 6 x 22.23mm FAI1156SDG

Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on stone and concrete. By presenting the disc to the workpiece at an angle of 45, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work

GBP 2.29
1

Faithfull Depressed Centre Stone Grinding Disc 100 x 6 x 16mm FAI1006SDG

Faithfull Depressed Centre Stone Grinding Disc 100 x 6 x 16mm FAI1006SDG

Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on stone and concrete. By presenting the disc to the workpiece at an angle of 45, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work

GBP 1.79
1

Faithfull Depressed Centre Stone Cutting Disc 115 x 3.2 x 22.23mm FAI1153SDC

Faithfull Depressed Centre Stone Cutting Disc 115 x 3.2 x 22.23mm FAI1153SDC

Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depressed centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work

GBP 3.49
1

Faithfull Depressed Centre Stone Cut Off Disc 100 x 3.2 x 16mm FAI1003SDC

Faithfull Depressed Centre Stone Cut Off Disc 100 x 3.2 x 16mm FAI1003SDC

Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depressed centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work

GBP 2.59
1

Faithfull SDS Plus Drill Bit 7mm OL 110mm WL 50mm FAISDS7110

Faithfull SDS Plus Drill Bit 7mm OL 110mm WL 50mm FAISDS7110

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete.The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck.For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

GBP 4.09
1

Faithfull SDS Plus Drill Bit 5.5mm OL 160mm WL 100mm FAISDS55160

Faithfull SDS Plus Drill Bit 5.5mm OL 160mm WL 100mm FAISDS55160

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete.The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck.For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

GBP 4.09
1

Faithfull Ceramic Tile Markers (Pack 2) FAITLMARKERS

Faithfull Ceramic Tile Markers (Pack 2) FAITLMARKERS

These Faithfull Tile Markers are suitable for marking ceramic surfaces prior to cutting and shaping. May also be used on glass, plastic and metal surfaces. The line can be easily rubbed off after use. The markers' easy-peel action means that no sharpening is required. However, these markers can be sharpened with a knife if a fine edge is required. WARNING Always test the marker first on a spare tile as permanent marking may occur on certain natural or unglazed materials i.e., stone and porcelain. The pack contains one red and one black marker.

GBP 3.09
1

Faithfull SDS Plus Drill Bit 5.5mm OL 110mm WL 50mm FAISDS55110

Faithfull SDS Plus Drill Bit 5.5mm OL 110mm WL 50mm FAISDS55110

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete.The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck.For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

GBP 3.69
1

Faithfull SDS Plus Drill Bit 6mm OL 160mm WL 100mm FAISDS6160

Faithfull SDS Plus Drill Bit 6mm OL 160mm WL 100mm FAISDS6160

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete.The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck.For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

GBP 4.09
1

Faithfull SDS Plus Drill Bit 5mm OL 110mm WL 50mm FAISDS5110

Faithfull SDS Plus Drill Bit 5mm OL 110mm WL 50mm FAISDS5110

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete.The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck.For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

GBP 2.99
1

Faithfull SDS Plus Drill Bit 7mm OL 160mm WL 100mm FAISDS7160

Faithfull SDS Plus Drill Bit 7mm OL 160mm WL 100mm FAISDS7160

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete.The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck.For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

GBP 4.09
1

Faithfull SDS Plus Drill Bit 5mm OL 160mm WL 100mm FAISDS5160

Faithfull SDS Plus Drill Bit 5mm OL 160mm WL 100mm FAISDS5160

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete.The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck.For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

GBP 4.09
1

Faithfull SDS Plus Drill Bit 10mm OL 160mm WL 100mm FAISDS10160

Faithfull SDS Plus Drill Bit 10mm OL 160mm WL 100mm FAISDS10160

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete.The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck.For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

GBP 4.29
1

Faithfull SDS Plus Drill Bit 8mm OL 160mm WL 100mm FAISDS8160

Faithfull SDS Plus Drill Bit 8mm OL 160mm WL 100mm FAISDS8160

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete.The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck.For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

GBP 4.09
1

Faithfull SDS Plus Drill Bit 6mm OL 110mm WL 50mm FAISDS6110

Faithfull SDS Plus Drill Bit 6mm OL 110mm WL 50mm FAISDS6110

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete.The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck.For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

GBP 4.09
1

Faithfull Depressed Centre Metal Grinding Disc 100 x 5 x 16mm FAI1005MDG

Faithfull Depressed Centre Metal Grinding Disc 100 x 5 x 16mm FAI1005MDG

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work

GBP 1.79
1

Faithfull Depressed Centre Metal Grinding Disc 125 x 6.5 x 22.23mm FAI1256MDG

Faithfull Depressed Centre Metal Grinding Disc 125 x 6.5 x 22.23mm FAI1256MDG

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work

GBP 2.19
1

Faithfull Depressed Centre Metal Grinding Disc 115 x 6.5 x 22.23mm FAI1156MDG

Faithfull Depressed Centre Metal Grinding Disc 115 x 6.5 x 22.23mm FAI1156MDG

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work

GBP 1.99
1

Faithfull Depressed Centre Metal Grinding Disc 180 x 6.5 x 22.23mm FAI1806MDG

Faithfull Depressed Centre Metal Grinding Disc 180 x 6.5 x 22.23mm FAI1806MDG

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work

GBP 3.59
1

Faithfull Metal Cut Off Disc 300 x 3.5 x 22.23mm FAI3003522M

Faithfull Metal Cut Off Disc 300 x 3.5 x 22.23mm FAI3003522M

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work

GBP 4.19
1