mcb.dk | Få success online

Elmdene FOM8-DIN 8 Way Fused Output Module

Elmdene FOM8-DIN 8 Way Fused Output ModuleElmdenes new Fused Output Modules FOMs are available in three standard variants. FOM4 4 x 1A FOM8 8 x 500mA and the DIN rail mountable FOM8-DIN 8 x 1A.Particularly useful in CCTV applications it gives the installer the provision of up to 8 independently fused outputs extremely useful when powering multiple devices.Each output possesses its own health status LED indication which provides quick identification of any blown fuses. The DIN rail version also offers an onboard switch enabling the user to turn off the outputs allowing for safe installation and maintenance activities to be conducted.The FOM4 and FOM8 are provided with self-adhesive mounts while the DIN rail mountable version has the option to be either DIN rail or screw mounted. These devices are ideal for modular applications such as rack installations or for use within existing PSU enclosures.Key Features4 or 8 individually fused outputsFuse health LED indicationPTC Fuse versions availableDIN rail mountableSwitchable supply inputFlexible low-cost solution

GBP 23.08

1

Elmdene VR2440-P 24V a.c. Vision PSU 4Amp - 1 x Fused Output IP66 Rated

Elmdene VR2440-P 24V a.c. Vision PSU 4Amp - 1 x Fused Output IP66 RatedElmdenes popular 24V ac CCTV range of power supplies consists of both low-profile and IP6668 variants. The units are available in various power ratings up to 16A with options of individually fused output circuits. They have been specifically designed for CCTV applications providing enough power to control multiple PTZ cameras heaters IR illumination etc.Individual fused output versions can provide isolation of selected circuits when servicing or in the event one circuit fails allowing the rest of the system to operate normally maintaining system integrity.Units feature fuse health LEDs which are illuminated to show that each powered circuit is functioning correctly.Each fused output circuit may have different value fuses to suit the individual loads eg cameras heaters etc.Key Features1 x Fused Output24V a.c. Vision PSU 4AmpIdeal for CCTVIP66 ratedABS box 180h x 182w x 90d24V ac outputLow profile metal boxed 2A 4A 6A versionIP6668 version available - external applicationsSingle or multi-fused output optionsSafety thermal cut-outIndividual fuse health LEDs3-year warrantyPlease note The image is for illustrative purposes only.

GBP 58.19

1

Elmdene VRS123500EB 12Vdc Switch Mode PSU 3.5Amp - Output Flying Lead Fitted with 2.1mm Jack Connector

Elmdene VRS123500EB 12Vdc Switch Mode PSU 3.5Amp - Output Flying Lead Fitted with 2.1mm Jack ConnectorThe VRS123500EB is part of a family of Encapsulated high efficiency DC power supplies ideal for CCTV applications. There are six models in the 12Vdc range between 0.5A and 5.0A and two models in the 24Vdc range 0.5A and 1.0A.All models are available with a European or UK mains plug and with the option of a 2.1mm or 2.5mm dc output connector.The units feature a universal main input voltage range from 100 to 240V ac and includes electronic short circuit protection and mains status indication 3.5A and 5A models only. They also use high efficiency switch mode operation which means lower running temperature and lower running costs.The 2A 3.5A and 5A versions are available with a 4-way 2.1mm dc output splitter as an option.Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key FeaturesEncapsulated in plastic case4-Way Splitter CableUK Plug - mains - moulded UKEBEuropean EE Plug - Size 120x50x30Ideal for CCTVOutput flying lead fitted with 2.1mm jack connectorFully regulated 12Vdc output500mA 1A 1.5A 2A 3.5A and 5A outputs availableElectronic overload and short circuit ProtectionClass II double insulatedIdeal for CCTV camera installationsUK and European mains lead versionsHigh efficiency switch mode operationFull rated current to loadElectronic short circuit protectionMains status indication 3.5A 5AUniversal 100 240V ac mains supplyCompact size2.1mm dc output jack socket on flying lead4-way 2.1mm dc output splitter available3 year warranty

GBP 15.90

1

Elmdene FOM-8 8 Way Fused Output Module - Mounted On Sticky Pad Feet

Elmdene FOM-8 8 Way Fused Output Module - Mounted On Sticky Pad FeetElmdenes new Fused Output Modules FOMs are available in three standard variants. FOM4 4 x 1A FOM8 8 x 500mA and the DIN rail mountable FOM8-DIN 8 x 1A.Particularly useful in CCTV applications it gives the installer the provision of up to 8 independently fused outputs extremely useful when powering multiple devices.Each output possesses its own health status LED indication which provides quick identification of any blown fuses. The DIN rail version also offers an onboard switch enabling the user to turn off the outputs allowing for safe installation and maintenance activities to be conducted.The FOM4 and FOM8 are provided with self-adhesive mounts while the DIN rail mountable version has the option to be either DIN rail or screw mounted. These devices are ideal for modular applications such as rack installations or for use within existing PSU enclosures.Key Features4 or 8 individually fused outputsFuse health LED indicationPTC Fuse versions availableSwitchable supply inputAdhesive mounts providedFlexible low-cost solution

GBP 19.45

1

Elmdene FOM-4 4 Way Fused Output Module - Mounted On Sticky Pad Feet

Elmdene FOM-4 4 Way Fused Output Module - Mounted On Sticky Pad FeetElmdenes new Fused Output Modules FOMs are available in three standard variants. FOM4 4 x 1A FOM8 8 x 500mA and the DIN rail mountable FOM8-DIN 8 x 1A.Particularly useful in CCTV applications it gives the installer the provision of up to 8 independently fused outputs extremely useful when powering multiple devices.Each output possesses its own health status LED indication which provides quick identification of any blown fuses. The DIN rail version also offers an onboard switch enabling the user to turn off the outputs allowing for safe installation and maintenance activities to be conducted.The FOM4 and FOM8 are provided with self-adhesive mounts while the DIN rail mountable version has the option to be either DIN rail or screw mounted. These devices are ideal for modular applications such as rack installations or for use within existing PSU enclosures.Key Features4 or 8 individually fused outputsFuse health LED indicationPTC Fuse versions availableSwitchable supply inputAdhesive mounts providedFlexible low-cost solution

GBP 14.15

1

Elmdene VR2440-PTC-P 24V ac 4A Single PTC Fused Output IP68 Boxed

Elmdene VR2440-PTC-P 24V ac 4A Single PTC Fused Output IP68 BoxedThe VR2440-PTC-P is part of a family of 24V ac power supplies capable of delivering fully rated current to load. Available in either low profile metal or IP66 external enclosures they are ideal for CCTV camera installations.Key FeaturesIP68 boxed

GBP 57.55

1

Elmdene MULTI-ACCESS-UL-PSU6 UL294 12V 8A PSU With 8 Way Fused Output Module In V Box

Elmdene MULTI-ACCESS-UL-PSU6 UL294 12V 8A PSU With 8 Way Fused Output Module In V BoxHigh efficiency cost effective UL294-listed power supplycharger designed for use in Access Control systems enclosed in spacious cabinet fitted with two locks and a tamper switch.Regulated 13.8V dc output with battery stand-by supplying rated current to 8 independently PTC fused outputs resettable fuses individually configured for continuous or switched output current via a fire relay switch with flexible trigger options capable of operating with any external control signal.Class 2 or 8Amax Non-Power-Limited outputs available. Additional 0.5A for charging a 12V stand-by battery. PSU Universal mains input offers geographical flexibility. A dry volt free contact is provided for a loss of mains signalling.Key FeaturesAC-DC High power moduleGreen Mains present LEDContinuous full rated current to load at 12V 8AYellow Fault LEDUniversal mains input voltage 100-240VacNon-Power-Limited output availableFull electronic short circuit and overload protectionVersatile fire relay functionalityIndividual battery and output fuse protection8-way Class 2 fused outputs with health LEDsHigh efficiency electronics for reduced running costs and operating temperaturesIndependent ancillary relay 12Vdc or 24Vdc controlledInstaller safe design with all high voltage electronics fully shroudedEnclosure fitted with a tamper switch and locksMains transient protection circuitUL294 Listed for Access Control SystemsDestructive Attack I Endurance IV Line Security I Stand-by Power-IIDry contact indicating loss of AC mains MAINS FAIL. Required to be monitored by UL listed control unit in UL294 application.

GBP 405.64

1

Elmdene ACCESS-UL-PSU2 UL294 12V 4A PSU With 4 Way Fused Output Module In D Box

Elmdene ACCESS-UL-PSU2 UL294 12V 4A PSU With 4 Way Fused Output Module In D BoxElmdenes UL294-certified power solutions have been designed for compatibility with the most common access control door controllers. They offer installation flexibility and are a time-saving solution for system designers.These enclosures are engineered to accommodate multiple door controllers providing power integration within access control systems. This enables robust power management to ensure seamless operation and optimised performance of your access control systems.By choosing Elmdenes compliant power solutions you can rest assured that your access control systems will operate smoothly and efficiently. These power solutions are the perfect fit for system designers who value flexibility and reliability in their power supply solutions.This high efficiency cost effective UL294-listed power supplycharger is designed for use in Access Control systems enclosed in two spacious cabinet choices each fitted with locks and tamper switch.Regulated 13.8Vdc output with battery stand-by supplying rated current to 4 independently PTC Fused Outputs resettable fuses individually configured for continuous or switched output current via a fire relay switch with flexible trigger options capable of operating with any external control signal. PSU Universal mains input. Two dry volt free contacts are provided to signal loss of mains and battery output faults.Key FeaturesSingle and Multi-door solutions12V standby battery chargingMulti-fused outputs are providedMains fail reportingBattery Monitoring and Deep Discharge Protection ACCESS-UL-PSU1 and ACCESS-UL-PSU2Independent ancillary relay for applications such as a Fire door release relayIntegration with door controllers including Mercury Security ProWatch HoneywellD Enclosure 505 x 407 x 80

GBP 280.66

1

Elmdene ACCESS-UL-PSU1 UL294 12V 4A PSU With 4 Way Fused Output Module In G Box

Elmdene ACCESS-UL-PSU1 UL294 12V 4A PSU With 4 Way Fused Output Module In G BoxElmdenes UL294-certified power solutions have been designed for compatibility with the most common access control door controllers. They offer installation flexibility and are a time-saving solution for system designers.These enclosures are engineered to accommodate multiple door controllers providing power integration within access control systems. This enables robust power management to ensure seamless operation and optimised performance of your access control systems.By choosing Elmdenes compliant power solutions you can rest assured that your access control systems will operate smoothly and efficiently. These power solutions are the perfect fit for system designers who value flexibility and reliability in their power supply solutions.This high efficiency cost effective UL294-listed power supplycharger is designed for use in Access Control systems enclosed in two spacious cabinet choices each fitted with locks and tamper switch.Regulated 13.8Vdc output with battery stand-by supplying rated current to 4 independently PTC Fused Outputs resettable fuses individually configured for continuous or switched output current via a fire relay switch with flexible trigger options capable of operating with any external control signal. PSU Universal mains input. Two dry volt free contacts are provided to signal loss of mains and battery output faults.Key FeaturesSingle and Multi-door solutions12V standby battery chargingMulti-fused outputs are providedMains fail reportingBattery Monitoring and Deep Discharge Protection ACCESS-UL-PSU1 and ACCESS-UL-PSU2Independent ancillary relay for applications such as a Fire door release relayIntegration with door controllers including Mercury Security ProWatch HoneywellG Enclosure 440 x 250 x 115

GBP 241.67

1

Elmdene 2405ST-MOD PSU

Elmdene 2405ST-MOD PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode option

GBP 156.01

1

Elmdene 2405ST-K PSU

Elmdene 2405ST-K PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode option

GBP 245.68

1

Elmdene 2401ST-C PSU

Elmdene 2401ST-C PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode option

GBP 169.78

1

Elmdene 2405ST-E PSU

Elmdene 2405ST-E PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode option

GBP 259.36

1

Elmdene 2405ST-H PSU

Elmdene 2405ST-H PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode option

GBP 281.09

1

Elmdene 2402ST-K PSU

Elmdene 2402ST-K PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode optionPlease note this image is for illustrative purposes only.

GBP 197.96

1

Elmdene 2401ST-MOD PSU

Elmdene 2401ST-MOD PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independent 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode optionPlease note This image is for illustrative purposes only.

GBP 137.09

1

Elmdene 2402ST-H PSU

Elmdene 2402ST-H PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode optionPlease note this image is for illustrative purposes only.

GBP 232.69

1

Elmdene VR2440-4P 24V a.c. Vision PSU 4Amp - 4 x Fused Outputs IP66 Rated

Elmdene VR2440-4P 24V a.c. Vision PSU 4Amp - 4 x Fused Outputs IP66 RatedElmdenes popular 24V ac CCTV range of power supplies consists of both low-profile and IP6668 variants. The units are available in various power ratings up to 16A with options of individually fused output circuits. They have been specifically designed for CCTV applications providing enough power to control multiple PTZ cameras heaters IR illumination etc.Individual fused output versions can provide isolation of selected circuits when servicing or in the event one circuit fails allowing the rest of the system to operate normally maintaining system integrity.Units feature fuse health LEDs which are illuminated to show that each powered circuit is functioning correctly.Each fused output circuit may have different value fuses to suit the individual loads eg cameras heaters etc.Key Features4 x Fused Outputs24V a.c. Vision PSU 4AmpIdeal for CCTVIP66 ratedABS box 180h x 182w x 90d24V ac outputLow profile metal boxed 2A 4A 6A versionIP6668 version available - external applicationsSingle or multi-fused output optionsSafety thermal cut-outIndividual fuse health LEDs3-year warrantyPlease note The images is for illustrative purposes only.

GBP 79.91

1

Elmdene TR4 24Vdc 4A Door Retainer Power Supply Unit

Elmdene TR4 24Vdc 4A Door Retainer Power Supply UnitThe enhanced Elmdene TR range of power supplies has been specifically designed for access control applications that require remote control of the power supply output. A typical example being where a TR power supply unit is used to power magnetic door retainers utilising a signal from the fire panel in order to switch off the output to the doors in the event of a fire alarm activation.The units now have an expanded range of input options which includes the detection of a normally closed contact going open and also removal of a 24V dc signal to provide a fully fail safe operation mode BS 7273 Compliant.The three control input options for remote control of the output are as followsRemoval of an external 24V dc supply BS 7273 CompliantOpening of a normally closed volt-free contactClosing of a normally open volt-free contactLED status indicators provide quick diagnostics showing the presence of a mains input and output fuse failure.Key FeaturesRemote control of outputChoice of control optionsLED indicationMains transient protectionFail safe operation3 year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 85.75

1

Elmdene TR2 24Vdc 2A Door Retainer Power Supply Unit

Elmdene TR2 24Vdc 2A Door Retainer Power Supply UnitThe enhanced Elmdene TR range of power supplies has been specifically designed for access control applications that require remote control of the power supply output. A typical example being where a TR power supply unit is used to power magnetic door retainers utilising a signal from the fire panel in order to switch off the output to the doors in the event of a fire alarm activation.The units now have an expanded range of input options which includes the detection of a normally closed contact going open and also removal of a 24V dc signal to provide a fully fail-safe operation mode BS 7273 Compliant.The three control input options for remote control of the output are as followsRemoval of an external 24V dc supply BS 7273 CompliantOpening of a normally closed volt-free contactClosing of a normally open volt-free contactLED status indicators provide quick diagnostics showing the presence of a mains input and output fuse failure.Key FeaturesRemote control of outputChoice of control optionsLED indicationMains transient protectionFail safe operation3 year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 72.35

1

Elmdene 2402ST-C PSU

Elmdene 2402ST-C PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features2 Independent 27.6Vdc monitored outputBattery Free operation mode available not EN54-4 compliantSelf-resetting battery fuse protectionNo output interruption during automatic switchover between mains and battery powerDeep discharge protection disconnects battery from load when output voltage falls below 21.6VMains status indicator LED confirms mains input is presentBattery status indicator LED confirms healthy batteryFault indicator LED Yellow active on detection of output fault charger fault and mains failureFault-diagnostic indicator LED assists with identifying cause of fault visible through LidOutput 1 and Output 2 status indicator LEDs dual-path and independent mode optionPlease note this image is for illustrative purposes only.

GBP 184.55

1

Elmdene VR2480-P 24V ac 8A - 230Vac Input - Vision PSU - IP68 Enclosure

Elmdene VR2480-P 24V ac 8A - 230Vac Input - Vision PSU - IP68 EnclosureElmdenes popular 24V ac CCTV range of power supplies consists of both low-profile and IP6668 variants. The units are available in various power ratings up to 16A with options of individually fused output circuits. They have been specifically designed for CCTV applications providing enough power to control multiple PTZ cameras heaters IR illumination etc.Individual fused output versions can provide isolation of selected circuits when servicing or in the event one circuit fails allowing the rest of the system to operate normally maintaining system integrity.Units feature fuse health LEDs which are illuminated to show that each powered circuit is functioning correctly.Each fused output circuit may have different value fuses to suit the individual loads eg cameras heaters etc.The 8A low profile versions are offered in a lockable enclosure keyed alike while the other versions possess a screw lid. Cable entry is achieved by utilising either cable gland knockouts or via the allocated rear cable entry points of the enclosures.Key Features24V ac 8A - 230Vac InputIP68 enclosure230Vac Input24V ac outputLow profile metal boxed 2A 4A 6A versionIP6668 version available - external applicationsSingle or multi-fused output optionsUnique heatsink design on 8A IP rated modelSafety thermal cut-outIndividual fuse health LEDs3-year warrantyPlease note The image is for illustrative purposes only.

GBP 102.33

1

Elmdene 24Vdc 1A Low Profile Door Retainer Power Supply Unit - TRS1

Elmdene 24Vdc 1A Low Profile Door Retainer Power Supply Unit -TRS1The new Elmdene TRS range of power supplies has been specifically designed for access control applications that require remote control of the power supply output. A typical example being where a TRS power supply unit is used to power magnetic door retainers utilising a signal from the fire panel in order to switch off the output to the doors in the event of a fire alarm activation.The TRS PSU has a range of input options which includes the detection of a normally closed contact going open and also removal of a 24V dc signal to provide a fully fail safe operation mode BS 7273 Compliant.The three control input options for remote control of the output are as follows Removal of an external 24V dc supply BS 7273 CompliantOpening of a normally closed volt-free contactClosing of a normally open volt-free contactLED status indicators provide quick diagnostics showing the presence of a mains input and output fuse failure. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Key Features Efficient switch mode operationWide input voltage rangeRemote control of outputChoice of control optionsLED indication within enclosureMains transient protectionFail safe operationScreen printing available3 year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 54.24

1

Elmdene VRS125000EB-4 12Vdc 5A Encapsulated CCTV SMPSU with 4-Way Splitter Cable - UK Plug

Elmdene VRS125000EB-4 12Vdc 5A Encapsulated CCTV SMPSU with 4-Way Splitter Cable - UK PlugThe VRS125000EB-4 is part of a family of Encapsulated high efficiency DC power supplies ideal for CCTV applications. There are six models in the 12Vdc range between 0.5A and 5.0A and two models in the 24Vdc range 0.5A and 1.0A.All models are available with a European or UK mains plug and with the option of a 2.1mm or 2.5mm dc output connector.The units feature a universal main input voltage range from 100 to 240V ac and includes electronic short circuit protection and mains status indication 3.5A and 5A models only. They also use high efficiency switch mode operation which means lower running temperature and lower running costs.The 2A 3.5A and 5A versions are available with a 4-way 2.1mm dc output splitter as an option.Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key Features4-Way Splitter CableUK PlugFully regulated 12Vdc output500mA 1A 1.5A 2A 3.5A and 5A outputs availableElectronic overload and short circuit ProtectionClass II double insulatedIdeal for CCTV camera installationsUK and European mains lead versionsHigh efficiency switch mode operationFull rated current to loadElectronic short circuit protectionMains status indication 3.5A 5AUniversal 100 240V ac mains supplyCompact size2.1mm dc output jack socket on flying lead4-way 2.1mm dc output splitter available3 year warranty

GBP 19.98

1

Elmdene FIREFOM-12-4 12V Interface Relay

Elmdene FIREFOM-12-4 12V Interface RelayThis range of interface relays are available in 12V and 24V versions and provide 4 8 or 12 individually fused outputs - dependant on model. Each output is selectable to be either permanently on or switched via a remote signal from a Fire Panel or other control device. The remote signal can be either dry contacts NO NC or a low voltage input. Typically used in Access Control applications to remove power from locks while maintaining power to the ACU on a Fire Alarm activation.Key FeaturesProvides 4 individually fused outputsMultiple Trigger configurationsContact rating 8A 12V dcEach output selectable for switched permanently on or disabledLED indication when Relay EnergisedLow current consumptionStandalone device

GBP 20.33

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)