mcb.dk | Få success online

Elmdene LPS-ENC-T Li-Power Enclosure with Tamper

Elmdene LPS-ENC-T Li-Power Enclosure with TamperLi-Power power supplies have been designed to house andpower common alarm signalling communicators whilst accommodating and chargingin-built Lithium battery packs. Offered in a low-profile sleek enclosure itprovides a compact and flexible solution for intruder installations at bothGrade 2 and Grade 3 requirements EN50131-62017 and PD6662.Key FeaturesExtended life span up to 3 times more than a standard lead acidbattery50 reduction in wall footprint requiredUp to 5 times greater power cycling performanceIncorporates additional battery safety features

GBP 41.66

1

Elmdene LPS-12-G2 Li-Power PSU with 9Ah Battery

Elmdene LPS-12-G2 Li-Power PSU with 9Ah BatteryLi-Power power supplies have been designed to house and power common alarm signalling communicators whilst accommodating and charging in-built Lithium battery packs. Offered in a low-profile sleek enclosure it provides a compact and flexible solution for intruder installations at both Grade 2 and Grade 3 requirements EN50131-62017 and PD6662.Key FeaturesIdeal for housing common communication alarm signalling devicesProvides 150mA to loadMains fail signalling EPSGeneral PSU fault signalling GENFront and rear tamper protectionSleek compact plastic enclosure12Vdc outputCompliant with EN50131-6 Grade 212 hour battery backupL266 x W195 x D60 mm1.0kg

GBP 111.10

1

Elmdene LPS-12-G3 Li-Power PSU with 18Ah Battery

Elmdene LPS-12-G3 Li-Power PSU with 18Ah BatteryLi-Power power supplies have been designed to house and power common alarm signalling communicators whilst accommodating and charging in-built Lithium battery packs. Offered in a low-profile sleek enclosure it provides a compact and flexible solution for intruder installations at both Grade 2 and Grade 3 requirements EN50131-62017 and PD6662.Key FeaturesIdeal for housing common communication alarm signalling devicesProvides 150mA to loadMains fail signalling EPSGeneral PSU fault signalling GENFront and rear tamper protectionSleek compact plastic enclosure12Vdc outputCompliant with EN50131-6 Grade 330 hour battery backupL266 x W195 x D60 mm 1.0kg

GBP 144.42

1

Elmdene ACCESS-PSU-N 12V d.c. Switch Mode PSU 13.8V 2Amp To Load 0.5A Battery Charging

Elmdene ACCESS-PSU-N 12V d.c. Switch Mode PSU 13.8V 2Amp To Load 0.5A Battery ChargingThe ACCESS-PSU-N is part of a range of power supplies which have been specifically designed to house common access control door controllers. With different power options and enclosure sizes this range offers the installer a PSU for a variety of applications.This range offers fault signalling and can charge a 12V standby battery to provide backup power on a mains failure. Multi-fused outputs are provided to allow the installer to protect individual circuits as required. All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.Key Features13.8V dc outputCompact single and multi-controller enclosuresPCB mounts supplied for common controllersMains fail fault output excluding ACCESS-PSU-NTamper protectionSwitchable 12V 24V dc versions availableUniversal 90 to 264V ac mains input rangeBespoke models and branding available3 year warrantyPlease note The image is for illustrative purposes only. Please contact us for further details.

GBP 63.04

1

Elmdene UNIVERSAL-ENC-M Medium Tampered Enclosure With Universal Backplate - 330Hx377Wx85Dmm

Elmdene UNIVERSAL-ENC-M Medium Tampered Enclosure With Universal Backplate - 330Hx377Wx85DmmA unique range of enclosures ideal for housing third party devices. Provided with a mesh backplate and associated fixings it allows the installer complete versatility on what and where components are fitted. With an extensive range of modules communicators and control boards on the market finding a suitable PSU enclosure to house these devices can be challenging. Elmdenes Universal Enclosure range provides a simple solution to this problem providing complete flexibility whilst reducing installation times. The choice of enclosure sizes and a variant that is provided with an integrated PSU 12V DC or 24V DC selectable offers the installer an ideal solution for any security application.Key FeaturesCompatible with all common third-party devicesFront rear tamper protection as standardComes with all fixings for third-party device installationAvailable in two sizesCan be used in conjunction with Elmdene power modulesQuick simple installationAdded flexibility for installerPowder coated white steel enclosureHigh energy efficient - reducing energy billsMesh backplate assists airflowLifetime warranty330Hx377Wx85D mm

GBP 55.52

1

Elmdene UNIVERSAL-ENC-L Large Tampered Enclosure With Universal Backplate - 500Hx400Wx80D mm

Elmdene UNIVERSAL-ENC-L Large Tampered Enclosure With Universal Backplate - 500Hx400Wx80D mmA unique range of enclosures ideal for housing third party devices. Provided with a mesh backplate and associated fixings it allows the installer complete versatility on what and where components are fitted. With an extensive range of modules communicators and control boards on the market finding a suitable PSU enclosure to house these devices can be challenging. Elmdenes Universal Enclosure range provides a simple solution to this problem providing complete flexibility whilst reducing installation times. The choice of enclosure sizes and a variant that is provided with an integrated PSU 12V DC or 24V DC selectable offers the installer an ideal solution for any security application.Key FeaturesCompatible with all common third-party devicesFront and rear tamper protection as standardComes with all fixings for third-party device installationCan be used in conjunction with Elmdene power modulesQuick and simple installationAdded flexibility for installerPowder coated white steel enclosureHigh energy efficient reducing energy billsMesh backplate assists airflowH500xW400xD80mm

GBP 76.76

1

Elmdene ACCESS-EXP-PLATE Expander Plate for MULTI-ACCESS-PSU2

Elmdene ACCESS-EXP-PLATE Expander Plate for MULTI-ACCESS-PSU2This range has been specifically designed to house most common access control door controllers. With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models off er fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also off er additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoff s supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost eff ective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warranty

GBP 45.48

1

Elmdene ACCESS-PSU2 Access Control Mid-Sized Enclosure 13.8Vdc 4A

Elmdene ACCESS-PSU2 Access Control Mid-Sized Enclosure 13.8Vdc 4AThis range has been specifically designed to house most common access control door controllers.With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models offer fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoffs supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost effective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warranty13.8V dc 4A BM SMPSU 4-way Fused Output Module to fit 4 x small or 2 x mid-sized door controllers. Enclosure size 500H x 400W x 80D Max Battery 12V 17AhPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 171.85

1

Elmdene ACCESS-PSU Access Control Small Enclosure 13.8Vdc 2A

Elmdene ACCESS-PSU Access Control Small Enclosure 13.8Vdc 2AThis range has been specifically designed to house most common access control door controllers.With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models offer fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoffs supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost effective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warranty13.8V dc 2A BM SMPSU to fit 1 x small controller Enclosure size 275H X 330W X 80D Max battery 12V 7AhPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 89.68

1

Elmdene MULTI-ACCESS-PSU6 Access Control 13.8Vdc 8A

Elmdene MULTI-ACCESS-PSU6 Access Control 13.8Vdc 8A13.8Vdc 8A 27.6Vdc 4A BM SMPSU 8-Way Fused Output Module. PSU enclosure base that houses multiple access control devices Enclosure size 515H x 478W x 146Dmm Max battery 12V 17Ah.This range has been specifically designed to house most common access control door controllers.With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models offer fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoffs supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost effective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 358.43

1

Elmdene ACCESS-PSU1 Access Control Mid-Sized Enclosure 13.8Vdc 4A

Elmdene ACCESS-PSU1 Access Control Mid-Sized Enclosure 13.8Vdc 4AThis range has been specifically designed to house most common access control door controllers.With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models offer fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoffs supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost effective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warranty13.8V dc 4A BM SMPSU 4-way Fused Output Module to fit 2 x small or 1 x mid-sized door controllers Enclosure size 330H x 355W x 80D Max Battery 12V 17Ah.Please note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 123.91

1

Elmdene MULTI-ACCESS-PSU2 Access Control 13.8Vdc 8A

Elmdene MULTI-ACCESS-PSU2 Access Control 13.8Vdc 8A13.8Vdc 8A 27.6Vdc 4A BM SMPSU 8-Way Fused Output Module. PSU enclosure base that houses multiple access control devices expandable with ACCESS-EXP-PLATE Enclosure size 515H x 478W x 146Dmm Max battery 12V 17Ah.This range has been specifically designed to house most common access control door controllers.With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models offer fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoffs supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost effective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 285.58

1

Elmdene ACCESS-PSU2-8A Access Control Mid-Sized Enclosure 13.8Vdc 8A

Elmdene ACCESS-PSU2-8A Access Control Mid-Sized Enclosure 13.8Vdc 8AThis range has been specifically designed to house most common access control door controllers.With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models offer fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoffs supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost effective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warranty13.8Vdc 8A SMPSU 4-way Fused Output Module to fit 4 x small or 2 x mid-sized door controllers or 4 x Net2 Controllers Enclosure size 500H x 400W x 80D Max Battery 12V 17AhPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 203.95

1

Elmdene G1224-42N-C 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU

Elmdene G1224-42N-C 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU The new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 4Amp 24V dc 2Amp 27.6V SMPSUC-Enclosure 275Hx330Wx80DFits upto 2 x 12V 7Ah batteryPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 92.04

1

Elmdene G1224-63NU 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU Module Only

Elmdene G1224-63NU 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU Module OnlyThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 6Amp 24V dc 3Amp 27.6V SMPSUUnboxed Module Only157Lx143Wx55H mmPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 97.57

1

Elmdene G1224-84N-R 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU R Enclosure

Elmdene G1224-84N-R 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU R EnclosureThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSUR-Enclosure 410Hx390Wx90DFits upto 2 x 12V 17Ah batteriesPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 168.36

1

Elmdene G1224-63N-C 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU C-Enclosure

Elmdene G1224-63N-C 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU C-EnclosureThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 6Amp 24V dc 3Amp 27.6V SMPSUC-Enclosure 275Hx330Wx80DFits upto 2 x 12V 7Ah batteryPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 126.43

1

Elmdene G1224-84N-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU C Enclosure

Elmdene G1224-84N-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU C EnclosureThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSUC-Enclosure 275Hx330Wx80DFits upto 2 x 12V 7Ah batteryPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 144.74

1

Elmdene G1224-42NU 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU Unboxed

Elmdene G1224-42NU 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU UnboxedThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 4Amp 24V dc 2Amp 27.6V SMPSUUnboxed Module Only157Lx143Wx55H mmPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 72.67

1

Elmdene G1224-84NU 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU Module Only

Elmdene G1224-84NU 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU Module OnlyThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSUUnboxed Module Only157Lx143Wx55H mmPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 127.46

1

Elmdene G1224-84N-8-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU with 8-way Fused Outputs - C-Enclosure

Elmdene G1224-84N-8-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU with 8-way Fused Outputs - C-EnclosureThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSUwith 8-way Fused OutputsC-Enclosure 275Hx330Wx80DFits upto 2 x12V 7Ah batteriesPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 168.36

1

Elmdene G1224-84N-4-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU with 4-way Fused Outputs - C-Enclosure

Elmdene G1224-84N-4-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU with 4-way Fused Outputs - C-EnclosureThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSUwith 4-way Fused OutputsC-Enclosure 275Hx330Wx80DFits upto 2 x 12V 7Ah batteriesPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 164.82

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)

Elmdene LPS-ENC-T Li-Power Enclosure with Tamper

Elmdene LPS-12-G2 Li-Power PSU with 9Ah Battery

Elmdene LPS-12-G3 Li-Power PSU with 18Ah Battery

Elmdene ACCESS-PSU-N 12V d.c. Switch Mode PSU 13.8V 2Amp To Load 0.5A Battery Charging

Elmdene UNIVERSAL-ENC-M Medium Tampered Enclosure With Universal Backplate - 330Hx377Wx85Dmm

Elmdene UNIVERSAL-ENC-L Large Tampered Enclosure With Universal Backplate - 500Hx400Wx80D mm

Elmdene ACCESS-EXP-PLATE Expander Plate for MULTI-ACCESS-PSU2

Elmdene ACCESS-PSU2 Access Control Mid-Sized Enclosure 13.8Vdc 4A

Elmdene ACCESS-PSU Access Control Small Enclosure 13.8Vdc 2A

Elmdene MULTI-ACCESS-PSU6 Access Control 13.8Vdc 8A

Elmdene ACCESS-PSU1 Access Control Mid-Sized Enclosure 13.8Vdc 4A

Elmdene MULTI-ACCESS-PSU2 Access Control 13.8Vdc 8A

Elmdene ACCESS-PSU2-8A Access Control Mid-Sized Enclosure 13.8Vdc 8A

Elmdene G1224-42N-C 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU

Elmdene G1224-63NU 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU Module Only

Elmdene G1224-84N-R 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU R Enclosure

Elmdene G1224-63N-C 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU C-Enclosure

Elmdene G1224-84N-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU C Enclosure

Elmdene G1224-42NU 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU Unboxed

Elmdene G1224-84NU 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU Module Only

Elmdene G1224-84N-8-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU with 8-way Fused Outputs - C-Enclosure

Elmdene G1224-84N-4-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU with 4-way Fused Outputs - C-Enclosure

Powered by Cobiro