Elmdene TS443-16 16 Ohm Extension Speaker - White Polycarbonate - 110 x 110 x 55 Elmdene TS443-16 16 Ohm Extension Speaker - White Polycarbonate - 110 x 110 x 55The TS443-16 is part of a range of extension speakers for use in intruder alarm systems and retail security.Key Features20W ratingPolycarbonate enclosure3-year warrantyDimensions 110 x 110 x 55Please note The image is for illustrative purposes only. Please contact us for further information. GBP 5.22 1
Elmdene TS443-16T 16 Ohm Extension Speaker with Tamper - White Polycarbonate - 110 x 110 x 55 Elmdene TS443-16T 16 Ohm Extension Speaker with Tamper - White Polycarbonate - 110 x 110 x 55The TS443-16T is part of a range of extension speakers for use in intruder alarm systems and retail security.Key Features20W ratingPolycarbonate enclosure3-year warrantyDimensions 110 x 110 x 55Please note The image is for illustrative purposes only. Please contact us for further information. GBP 5.06 1
Elmdene TS443-8T 8 Ohm Ext Speaker cw Tamper - White Polycarbonate - 110 x 110 x 55 Elmdene TS443-8T 8 Ohm Ext Speaker cw Tamper - White Polycarbonate - 110 x 110 x 55The TS443-8T is apart of a range of Extension Speakers for intruder alarm systems.8 Ohm units available rated at 20W and housed in a polycarbonate enclosure.Key Features8 and 16 Ohm units available20W ratingPolycarbonate enclosure3 year warrantyDimensions 110 H x 110 W x 55 D GBP 10.78 1
Elmdene INT400 EN50131-4 Security Grade 3 Dual Internal Live Sounder Elmdene INT400 EN50131-4 Security Grade 3 Dual Internal Live SounderThe INT400 sounder is used for notification of an alarm condition as generated within an intruder hold-up or other alarm system. In response to commands from the alarm system control panel the INT400 will emit a high intensity sound.The sounder will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel.The INT400 is classified as an internal remote powered sounder and is powered via an external power source.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The device features a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 3Single speaker 110db 1mDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information. GBP 18.60 1
Elmdene INT500 EN50131-4 Security Grade 3 Dual Internal Live Sounder with Strobe Elmdene INT500 EN50131-4 Security Grade 3 Dual Internal Live Sounder with StrobeThe INT500 sounder is used for notification of an alarm condition as generated within an intruder hold-up or other alarm system. In response to commands from the alarm system control panel the INT500 will emit a high intensity sound andor operate a visual flash.It will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel. The INT500 is classified as an internal remote powered sounder and is powered via an external power source.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The device features a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 3Single speaker 108db 1mDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information. GBP 23.58 1
Elmdene INT600 EN50131-4 Security Grade 3 Dual Internal Live Sounder Elmdene INT600 EN50131-4 Security Grade 3 Dual Internal Live SounderThe INT600 sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT600 will emit a high intensity sound for alarm and an adjustable low level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel. The INT600 is classified as an internal remote powered sounder and is powered via an external power source.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The device features a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 3Single speaker 108db 1mDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate 160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information. GBP 21.85 1
Elmdene INT400S EN50131-4 Security Grade 2 Internal Live Sounder Elmdene INT400S EN50131-4 Security Grade 2 Internal Live SounderThe INT400S sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT400S will emit a high intensity sound for alarm and an adjustable low-level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel.The INT400S is classified as an internal self-powered sounder and has an on-board battery which is recharged via the external power source. This battery is used to operate the sounder if the external power to the sounder is removed.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The devices feature a modern stylish polycarbonate cover.Key FeaturesInternal Sounder for Intruder SystemsGrade 2Single speaker 108db 1mSAB operationDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information. GBP 22.49 1
Elmdene INT500S EN50131-4 Security Grade 2 Dual Internal Live Sounder Elmdene INT500S EN50131-4 Security Grade 2 Dual Internal Live SounderThe INT500S sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT500S will emit a high intensity sound for alarm and an adjustable low-level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel.The INT500S is classified as an internal self-powered sounder and has an on-board battery which is recharged via the external power source. This battery is used to operate the sounder if the external power to the sounder is removed.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The devices feature a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 2Single speaker 108db 1mSAB operationDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information. GBP 30.64 1
Elmdene INT600S EN50131-4 Security Grade 2 Dual Internal Live Sounder Elmdene INT600S EN50131-4 Security Grade 2 Dual Internal Live SounderThe INT600S sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT600 will emit a high intensity sound for alarm and an adjustable low-level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel. The INT600S is classified as an internal remote powered sounder and is powered via an external power source.The INT600S is classified as an internal self-powered sounder and has an on-board battery which is recharged via the external power source. This battery is used to operate the sounder if the external power to the sounder is removed.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The devices feature a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 2Single speaker 108db 1mSAB operationDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information. GBP 25.43 1