54 results (0,14623 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Electro Detectors Radio Silence Alarm Button EDA-T5100

Electro Detectors Radio Silence Alarm Button EDA-T5100

Electro Detectors Radio Silence Alarm Button EDA-T5100The Alarm Silence Button brings more flexibility to the operation of the already sophisticated Zerio Plus fire alarm system. The units usually installed in individual flats are designed to be used in conjunction with the Zerio Plus HMO programming mode. If the system detects smoke or heat in a flat then the sounders in the flat would automatically sound and a warning displayed on the control panel. If the activation has been caused by the occupant of the flat he would normally have to go the control panel but in order to silence the sounders he can now silence the alarm from his own flat this result in the sounders being silenced and the panel being reset. As it is likely that there is still smoke or heat in the vicinity of the flat then the devices in the flat are isolated for a pre-programmed period of time. This gives plenty of opportunity to clear the area of the smoke. If after this time the device is still detecting smoke then the process will repeat.If the panel displays the warning but the silence button is not activated then the system will evacuate the building after another pre-programmed period of time. The system has the flexibility so that devices programmed into communal areas can either be programmed to evacuate the entire building or just the communal areas. This unit is the latest development from a company which has over 30 years of designing and manufacturing radio fire alarm systems and has used the same principle for silence buttons in the highly successful Millennium and Zerio ranges.Key FeaturesSilence system remotelyEN54 part 25Fully addressableSimple to programUp to 7 year battery lifeSmall attractive compact designCompatible with Zerio plus panels

GBP 128.16
1

Electro Detectors Radio LED Beacon EDA-A6060

Electro Detectors Radio LED Beacon EDA-A6060

Electro Detectors Radio LED Beacon EDA-A6060The EDA-A6060 Zerio Plus Wireless Beaconis a White Wall Mounted Fire AlarmBeacon designed specifically to be used with the Zerio Plus range of wireless fire alarm panels. To ensure that the integrity of the communication link is maintained frequent transmissions are made by the EDA-A6060 Zerio Plus WirelessBeacon to the control panel so that in the unlikely event of the radio signal failing to reach the panel a fault is reported.

GBP 216.66
1

Electro Detectors Radio Optical Smoke Sounder Detector with LED EDA-R6030

Electro Detectors Radio Optical Smoke Sounder Detector with LED EDA-R6030

Please Note Zerio Plus devices pre 2013 with a blue label on the back need to have the Q670 batteries installed and the newer post 2013 with a white label on the back require the Q690 batteries.Electro Detectors Radio Optical Smoke Sounder Detector with LED EDA-R6030The combined optical smoke detector and sounder has been further refined to add a flashing LED beacon to the unit. Based on the successful Millennium and Zerio systems the new Zerio Plus device increases the flexibility of the system especially where designers are working with the requirements of the Disability Discrimination ACT DDA. Offering the advanced features of the Zerio Plus detector the unit is housed in an attractive moulding and shares a common fixing and is interchangeable with the existing Zerio Plus detectors. The combined optical smoke detector and sounder with LED beacon contains a powerful processor and utilises surface mount technology to achieve the ultimate in performance and reliability.The sounder section utilises a high output sounder switch mode power supply and a sensitive narrow band FM receiver. The LED beacon uses revolutionary technology to be able to deliver the power required to illuminate the very bright beacon. The unit is fully programmable and is capable as is the usual sounder detector of being divided into 255 individually controlled areas. Fully configurable by radio the combined optical smoke detector and sounder with LED beacon stores a unique serial number and length of time in service in its non-volatile memory. The combined optical smoke detector and sounder with LED beacon is designed to comply with all appropriate sections of EN54Key FeaturesEN54 Part 3 7 and 25 compliantHigh intensity LED BeaconFully addressableSelectable sensitivityUp to 5 year battery lifeSmall attractive compact designPre-alarm warningHead dirty warningCompatible with Zerio Plus Panels

GBP 292.03
1

Electro-Detectors EDA-Z1030 Spare Zerio Detector Programming Lead

Electro-Detectors EDA-Z1030 Spare Zerio Detector Programming Lead

Electro-Detectors EDA-Z1030 Spare Zerio Detector Programming LeadThe EDA-Z1030 Zerio Panel to Detector Programming Lead allows Zerio Radio Wireless Fire Alarm Devices to be programmed through the Zerio Radio Wireless Control Panel. The lead simply connects the panel to the detector or device and allows the unit to be programmed using the engineer functions.Please Note This programming lead is for use with the Zerio Wireless Fire Alarm System only.

GBP 53.46
1

Electro Detectors Radio Optical Smoke Detector with Combined Sounder EDA-R6000

Electro Detectors Radio Optical Smoke Detector with Combined Sounder EDA-R6000

Please Note Zerio Plus devices pre 2013 with a blue label on the back need to have the Q670 batteries installed and the newer post 2013 with a white label on the back require the Q690 batteries.Electro Detectors Radio Optical Smoke Detector with Combined Sounder EDA-R6000The EN54 combined optical smoke detector and sounder has been based on the successful Millennium and Zerio systems. The new Zerio Plus device has the usual features of the original device with increases in flexibility when running on the Zerio Plus system. Offering the advanced features of the Zerio Plus detector the unit is housed in an attractive moulding and shares a common foxing and is interchangeable with the existing Zerio Plus detectors.The Combined optical smoke detector and sounder contains a powerful processor and utilizes surface mount technology to achieve the ultimate in performance and reliability. The sounder section utilizes a high output sounder switch mode power supply and a sensitive narrow band FM receiver. The unit is fully programmable and is capable as is the usual sounder detector of being divided into 255 individually controlled areas.Fully configurable by radio the combined optical smoke detector and sounder stores a unique serial number and length of time in service in its non-volatile memory. With several available tones which can be changed with a few button presses at the control panel the system offers flexibility never seen on a wired system. The combined detector is designed to comply with all appropriate sections of EN54.Key FeaturesEN54 part 3 7 and 25 compliantFully addressableSelectable sensitivityUp to 5 year battery lifeSmall attractive compact designPre-alarm warningHead dirty warningCompatible with Zerio Plus Panels

GBP 245.64
1

Electro Detectors Zerio Plus Radio Heat Detector EDA-D5000

Electro Detectors Zerio Plus Radio Heat Detector EDA-D5000

Electro Detectors Radio Heat Detector EDA-D5000The Zerio Plus radio heat detector from Electro-Detectors represents a new benchmark in terms of what the marketplace can expect from a radio detector. The detector is the latest development from a company which has over 30 years of designing and manufacturing fire alarm systems. Based on the highly successful Millennium and Zerio ranges the detector is housed in the original attractive low profile moulding. The addressable detector contains a powerful processor utilising surface mount technology to achieve the ultimate in performance and reliability.Long operational life and stable operation has been successfully achieved by using sophisticated protocols and the most technologically advanced components. The unit is fully configurable by the Zerio Plus panel which determines whether the unit is to operate as an A1S which has been 3rd party tested an A1R a fixed point or rate of rise heat detector. The latter options allow the operator the opportunity to set the temperature of alarm or sensitivity. A unique serial number and the length of time in service are stored in its internal memory.All data is retained in this non-volatile memory which is not corrupted or erased even should power be removed. A battery life of up to 7 years and continual monitoring minimise detector maintenance but sophisticated self-testing ensure confidence in detector operation. The Zerio Plus radio heat detector is fully compliant with the relevant sections of BS5839 and EN54 including Part 25. The detector is supplied complete with its base and battery and just requires two screws to mount the unit on the ceilingKey FeaturesEN54 Part 5 and 25 approvedProgrammable Types A1S A1RFully AddressableUp to 7 Year Battery LifeSmall Attractive Compact DesignCompatible with Zerio Plus Panels

GBP 124.96
1

Electro Detectors Radio Heat Sounder Detector with LED Beacon EDA-D6030

Electro Detectors Radio Heat Sounder Detector with LED Beacon EDA-D6030

Electro Detectors Radio Heat Sounder Detector with LED Beacon EDA-D6030The EN54 combined sounder detector has been based on the successful Millennium and Zerio systems. The new Zerio Plus device has the usual features of the original device with increases in flexibility when operating with the Zerio Plus system. Offering the advanced features of the Zerio Plus detector the unit is housed in an attractive moulding and shares a common fixing and is interchangeable with the existing Zerio Plus detectors. The combined detector contains a powerful processor and utilises surface mount technology to achieve the ultimate in performance and reliability. The sounder section utilises a high output sounder switch mode power supply and a sensitive narrow bandFM receiver.The unit is fully programmable and is capable as is the usual sounder detector of being divided into 255 individually controlled areas. Fully configurable by radio the combined detector stores a unique serial number and length of time in service in its non-volatile memory. With several available tones which can be changed with a few button presses at the control panel the system offers flexibility never seen on a wired system. The combined detector is designed to comply with all appropriate sections of EN54.Key FeaturesEN54 Part 25Fully AddressableSelectable Alarm LevelRate of Rise or Fixed PointUp to 5 year battery lifeSmall attractive compact designAvailable with LED BeaconCompatible with Zerio Plus Panel

GBP 289.22
1

Electro Detectors Zerio Plus Radio Optical Smoke Detector EDA-R5000

Electro Detectors Zerio Plus Radio Optical Smoke Detector EDA-R5000

Please Note Zerio Plus devices pre 2013 with a blue label on the back need to have the Q670 batteries installed and the newer post 2013 with a white label on the back require the Q690 batteries.Electro Detectors Radio Optical Smoke Detector EDA-R5000The Zerio Plus radio optical smoke detector from Electro- Detectors represents a new benchmark in terms of what the marketplace can expect from a radio smoke detector. The detector is the latest development from a company which has over 30 years of designing and manufacturing fire alarm systems.Based on the highly successful Millennium and Zerio ranges the detector is housed in the original attractive low profile moulding. The addressable detector contains a powerful processor utilising surface mount technology to achieve the ultimate in performance and reliability. Long operational life high sensitivity and stable operation have been successfully achieved by using sophisticated protocols and the most technologically advanced components.Fully configurable by radio waves the Zerio Plus detector features programmable sensitivity. A unique serial number and the length of time in service are stored in its internal memory. All data is retained in this non-volatile memory which is not corrupted or erased even should power be removed. A battery life of up to 7 years and sensor recalibration minimise detector maintenance but sophisticated self-testing ensure confidence in detector operation. The Zerio Plus smoke detector is fully compliant with the relevant sections of BS5839 and EN54 including Part 25. The detector is supplied complete with its base and battery and just requires two screws to mount the unit on the ceiling.Key FeaturesEN54 Part 7 and 25 ApprovedFully AddressableSelectable SensitivityUp to 7 year battery lifeSmall attractive company designPre-alarm warningHead dirty warningCompatible with Zerio Plus Panels

GBP 133.38
1

Electro-Detectors EDA-Z5008FS 8 Zone Flush Mounted Wired Remote Display - Stainless Steel

Electro-Detectors EDA-Z5008FS 8 Zone Flush Mounted Wired Remote Display - Stainless Steel

Electro-DetectorsEDA-Z5008FS 8 Zone Flush Mounted Wired Remote Display - Stainless SteelFor applications where a premium finish is required to the control equipment the Zerio Plus wireless system supports a hardwired 8 zone remote display.This is available in either a flush EDA-Z5008FS or surface mount EDA-Z5008SS enclosure.The Zerio Plus is a compact radio fire alarm system designed for use in any type of commercial or residential premises. With the culmination of 30 years experience of fire alarm system design and manufacture the Zerio Plus has replaced the well-established Millennium and Zerio series of equipment combining the advantages and features of both systems. The installer does not require expensive additional equipment to configure the complete system.Once installed the control panel is used to aid system set-up program devices and to commission the system. The automatic set-up and learn modes simplify configuration decisions reducing the possibility of errors. The servicingadditionremoval of devices does not require extra programming equipment. Complex cause and effects can be programmed into the panel using the front keypad or by connecting a standard USB keyboard. Alternatively by programming a USB memory fob with a PC and then downloading the information into the panel. Internal configuration and operating data can be downloaded on to the same memory fob and then analysed on a PC. Configuration is also stored on a removable memory card for backup.The panel is capable of warning of any devices approaching their pre-programmed alarm condition and should any of the devices gradually become contaminated a warning condition is generated. If devices need to be installed beyond the range of the control panel either a radio booster or a wired transceiver can be added to relay information around the system. Up to7 boosters and 7 wired transceivers can be added to the system which operate as intelligent signal repeaters. Should larger systems be required they can be linked allowing for 960 devices with 60 panels.Key FeaturesStainless steel remote display for Zerio Plus systemAvailable in flush or surface mount enclosure

GBP 479.52
1

Electro-Detectors EDA-Z5008SS 8 Zone Surface Mounted Wired Remote Display - Stainless Steel

Electro-Detectors EDA-Z5008SS 8 Zone Surface Mounted Wired Remote Display - Stainless Steel

Electro-Detectors EDA-Z5008SS 8 Zone Surface Mounted Wired Remote Display - Stainless SteelFor applications where a premium finish is required to the control equipment the Zerio Plus wireless system supports a hardwired 8 zone remote display.This is available in either a flush EDA-Z5008FS or surface mount EDA-Z5008SS enclosure.The Zerio Plus is a compact radio fire alarm system designed for use in any type of commercial or residential premises. With the culmination of 30 years experience of fire alarm system design and manufacture the Zerio Plus has replaced the well-established Millennium and Zerio series of equipment combining the advantages and features of both systems. The installer does not require expensive additional equipment to configure the complete system.Once installed the control panel is used to aid system set-up program devices and to commission the system. The automatic set-up and learn modes simplify configuration decisions reducing the possibility of errors. The servicingadditionremoval of devices does not require extra programming equipment. Complex cause and effects can be programmed into the panel using the front keypad or by connecting a standard USB keyboard. Alternatively by programming a USB memory fob with a PC and then downloading the information into the panel. Internal configuration and operating data can be downloaded on to the same memory fob and then analysed on a PC. Configuration is also stored on a removable memory card for backup.The panel is capable of warning of any devices approaching their pre-programmed alarm condition and should any of the devices gradually become contaminated a warning condition is generated. If devices need to be installed beyond the range of the control panel either a radio booster or a wired transceiver can be added to relay information around the system. Up to7 boosters and 7 wired transceivers can be added to the system which operate as intelligent signal repeaters. Should larger systems be required they can be linked allowing for 960 devices with 60 panels.Key FeaturesStainless steel remote display for Zerio Plus systemAvailable in flush or surface mount enclosure 8 Zone Surface Mounted Wired Remote Display - Stainless Steel

GBP 501.23
1

Electro Detectors Radio Heat Detector with Combined Sounder EDA-D6000

Electro Detectors Radio Heat Detector with Combined Sounder EDA-D6000

Electro Detectors Radio Heat Detector with Combined Sounder EDA-D6000The EN54 combined heat detector and sounder has been based on the successful Millennium and Zerio systems. The new Zerio Plus device has the usual features of the original device with increases in flexibility when operating with the Zerio Plus system. Offering the advanced features of the Zerio Plus detector the unit is housed in an attractive moulding and shares a common fixing and is interchangeable with the existing Zerio Plus detectors.The unit has been type tested to operate as an A1S type heat detector but can also be programmed to operate as an A1R rate of rise or fixed point detector. The combined heat detector and sounder contains a powerful processor and utilises surface mount technology to achieve the ultimate in performance and reliability.The sounder section utilises a high output sounder switch mode power supply and a sensitive narrow band FM receiver. The unit is fully programmable and is capable as is the usual sounder detector of being divided into 255 individually controlled areas. Fully configurable by radio the combined heat detector and sounder stores a unique serial number and length of time in service in its non-volatile memory. With several available tones which can be changed with a few button presses at the control panel the system offers flexibility never seen on a wired system. The combined heat detector and sounder is designed to comply with all appropriate sections of EN54Key FeaturesEN54 part 3 5 and 25 compliantProgrammable types A1S A1RFully AddressableUp to 5 Year Battery LifeSmall Attractive Compact DesignCompatible with Zerio Plus Panels

GBP 245.70
1

Electro Detectors Radio Input Output Unit EDA-T6080

Electro Detectors Radio Input Output Unit EDA-T6080

Electro Detectors Radio Input Output Unit EDA-T6080The Zerio Plus IO unit from Electro-Detectors represents a new benchmark in terms of what the marketplace can expect from a radio IO unit. This single unit has a whole host of modes of operation giving huge flexibility for what the unit can be used for. The unit is the latest development from a company which has over 30 years of designing and manufacturing radio fire alarm systems. Based on the highly successful Millennium and Zerio ranges the addressable unit contains a powerful processor utilising surface mount technology to achieve the ultimate in performance and reliability.Long operational life and stable operation has been successfully achieved by using sophisticated protocols and the most technologically advanced components. A unique serial number and the length of time in service are stored in its internal memory. All data is retained in this non-volatile memory which is not corrupted or erased even should power be removed. A battery life of up to 7 years and continual monitoring minimise maintenance but sophisticated self-testing ensure confidence in the units operation. The Zerio Plus IO unit is fully compliant with the relevant sections of BS5839 and EN54 including Part 25. The unit is supplied complete with transmitter mounting box and battery and just requires two screws to mount the unit to the wall.Key FeaturesEN54 Part 252 Monitored InputsSet of clean NONC contactsFully addressableUp to 7 year battery lifeSmall attractive compact designCompatible with Zerio Plus Panels

GBP 244.97
1

Electro-Detectors EDA-T6085 Radio InputOutput Unit DC with SMA for External Antenna

Electro-Detectors EDA-T6085 Radio InputOutput Unit DC with SMA for External Antenna

Electro-Detectors EDA-T6085 Radio InputOutput Unit DC with SMA for External AntennaA wireless input output interface unit with SMA antenna socket external antenna supplied separately.The Zerio Plus IO unit from Electro-Detectors represents a new benchmark in terms of what the marketplace can expect from a radio IO unit. This single unit has a whole host of modes of operation giving huge flexibility for what the unit can be used for. The unit is the latest development from a company which has over 30 years of designing and manufacturing radio fire alarm systems.Based on the highly successful Millennium and Zerio ranges the addressable unit contains a powerful processor utilising surface mount technology to achieve the ultimate in performance and reliability.Long operational life and stable operation has been successfully achieved by using sophisticated protocols and the most technologically advanced components.A unique serial number and the length of time in service is stored in its internal memory. All data is retained in this non-volatile memory which is not corrupted or erased even should power be removed. A battery life of up to 3 years and continual monitoring minimise maintenance but sophisticated self-testing ensure confidence in the units operation.The Zerio Plus IO unit is fully compliant with the relevant sections of BS5839 and EN54 including Part 25. The unit is supplied complete with transmitter mounting box and battery and just requires two screws to mount the unit to the wall.

GBP 287.82
1

Electro Detectors Radio Sounder with LED Beacon EDA-A6030

Electro Detectors Radio Sounder with LED Beacon EDA-A6030

Electro Detectors Radio Sounder with LED Beacon EDA-A6030Designed to complement the range of EDA Radio Fire Alarm equipment the EDA-A6030 electronic sounder with LED beacon is powered entirely by internal batteries controlled and monitored by radio producing a range of different sound tones at a sound level equivalent to that of a normal hard wired electronic sounder. The bright LED beacon alerts occupants with hearing difficulties or areas where there is an already high ambient sound level to an alarm situation. In normal operation the sounder continuously listens via its built in radio receiver to any instruction emanating from its controlling panel. Once operating it continues to listen for further instructions to change tone or silence.To ensure that the integrity of the communication link is maintained frequent transmissions are made by the sounder to the control panel so that in the unlikely event of the radio signal failing to reach the panel a fault is reported. Other coded transmissions are made to signal faults including unit removal battery low receiver failure and where external devices are connected to it a fault in that wiring. The unit is fully addressable and can be assigned to a particular area allowing phased evacuation to be incorporated into the system.Key FeaturesEN54 Part 25Fully Addressable105dB At 1m adjustableSelectable Tones Controlled from PanelUp to 5 Year Battery lifeSmall attractive compact designCompatible with Zerio Plus PanelsAvailable with LED BeaconCall point input optionDesigned and built in the UK

GBP 226.56
1

Electro Detectors Radio Call Point Break Glass Unit EDA-C5000

Electro Detectors Radio Call Point Break Glass Unit EDA-C5000

Electro Detectors Radio Call Point Break Glass Unit EDA-C5000The Zerio Plus break glass unit from Electro-Detectors represents a new benchmark in terms of what the marketplace can expect from a radio callpoint. This unit is the latest development from a company which has over 30 years of designing and manufacturing radio fire alarm systems. Based on the highly successful Millennium and Zerio ranges the addressable unit contains a powerful processor utilising surface mount technology to achieve the ultimate in performance and reliability. Long operational life and stable operation has been successfully achieved by using sophisticated protocols and the most technologically advanced components.A unique serial number and the length of time in service is stored in its internal memory. All data is retained in this non-volatile memory which is not corrupted or erased even should power be removed. A battery life of up to 7 years and continual monitoring minimise maintenance but sophisticated self-testing ensure confidence in the units operation. The Zerio Plus callpoint is fully compliant with the relevant sections of BS5839 and EN54 including Part 25. The unit is supplied complete with call-point mounting box and battery and just requires two screws to mount the unit to the wall.Key FeaturesEN54 Part 25Fully addressableUp to 7 Year Battery LifeSmall attractive compact designIP65 Option

GBP 120.06
1

Electro Detectors Radio Sounder EDA-A6000

Electro Detectors Radio Sounder EDA-A6000

Electro Detectors Radio Sounder EDA-A6000Designed to complement the range of EDA Radio Fire Alarm equipment the EDA-A6000 electronic sounder is powered entirely by internal batteries controlled and monitored by radio producing up to fourteen different sound tones at a sound level equivalent to that of a normal hard wired electronic sounder. In normal operation the sounder continuously listens via its built in radio receiver to any instruction emanating from its controlling panel. Once operating it continues to listen for further instructions to change tone or silence.To ensure that the integrity of the communication link is maintained frequent transmissions are made by the sounder to the control panel so that in the unlikely event of the radio signal failing to reach the panel a fault is reported. Other coded transmissions are made to signal faults including unit removal battery low receiver failure and where external devices are connected to it a fault in that wiring. The unit is fully addressable and can be assigned to a particular area allowing phased evacuation to be incorporated into the system.Key FeaturesEN54 Part 25Fully Addressable105dB at 1M adjustableSelectable tones from panelUp to 5 year battery lifeSmall attractive compact designCompatible with Zerio Plus PanelsAvailable with LED BeaconCall point input option

GBP 181.12
1

Electro Detectors Zerio Plus Radio Booster Unit EDA-Z6000

Electro Detectors Zerio Plus Radio Booster Unit EDA-Z6000

Electro Detectors Zerio Plus Radio Booster Unit EDA-Z6000The EDA-Z6000 is a Zerio Plus radio booster unit which requires a 240v supply. The unit is designed to relay radio signals from the main control panel around the site to the different devices and other booster panels. The radio booster unit will operate on a 868Mhz frequency.Key FeaturesRequires 240v mains supply868 Mhz operating frequencyStandby battery backup requires 1 x 7Ah 12v SLA Battery

GBP 425.41
1

Electro-Detectors EDA-Z6053 Zerio Plus SMS Transmitter External

Electro-Detectors EDA-Z6053 Zerio Plus SMS Transmitter External

Electro-Detectors EDA-Z6053 Zerio Plus SMS Transmitter ExternalThe Z6052 and Z6053 SMS modules enable a user to be notified by text message of any events on a Zerio Plus system. The module can be mounted inside the Zerio Plus control panel or can be mounted away from the panel and connected via 4-core cable. It accepts full size SIM cards from any UK network not supplied. Micro SIM and Nano SIM cards can be used with adaptors not supplied. The SMS module should be used in conjunction with one of the Y1100 Y1110 or Y1111 SMS antennas.The module will transmit the information being displayed on the main fire alarm screen such as zone location and device location.

GBP 427.44
1

Electro-Detectors EDA-Z6052 Zerio Plus SMS Transmitter Internal

Electro-Detectors EDA-Z6052 Zerio Plus SMS Transmitter Internal

Electro-Detectors EDA-Z6052 Zerio Plus SMS Transmitter InternalThe Z6052 and Z6053 SMS modules enable a user to be notified by text message of any events on a Zerio Plus system. The module can be mounted inside the Zerio Plus control panel or can be mounted away from the panel and connected via 4-core cable. It accepts full size SIM cards from any UK network not supplied. Micro SIM and Nano SIM cards can be used with adaptors not supplied. The SMS module should be used in conjunction with one of the Y1100 Y1110 or Y1111 SMS antennas.The module will transmit the information being displayed on the main fire alarm screen such as zone location and device location.

GBP 255.96
1

Electro Detectors Radio Weatherproof Call Point EDA-C5040

Electro Detectors Radio Weatherproof Call Point EDA-C5040

Electro Detectors Radio Weatherproof Call Point EDA-C5040The Zerio Plus break glass unit from Electro-Detectors represents a new benchmark in terms of what the marketplace can expect from a radio call point. This unit is the latest development from a company which has over 30 years of designing and manufacturing radio fire alarm systems. Based on the highly successful Millennium and Zerio ranges the addressable unit contains a powerful processor utilising surface mount technology to achieve the ultimate in performance and reliability.Long operational life and stable operation has been successfully achieved by using sophisticated protocols and the most technologically advanced components. A unique serial number and the length of time in service is stored in its internal memory. All data is retained in this non-volatile memory which is not corrupted or erased even should power be removed. A battery life of up to 7 years and continual monitoring minimise maintenance but sophisticated self-testing ensure confidence in the units operation.The Zerio Plus call point is fully compliant with the relevant sections of BS5839 and EN54 including Part 25. The unit is supplied complete with call point mounting box and battery and just requires two screws to mount the unit to the wall.Key FeaturesEN54-25 ApprovedIP65 RatingFully AddressableUp to 7-year battery lifeSmall attractive compact designCompatible with Zerio Plus Panels

GBP 343.50
1

Electro-Detectors EDA-Z6011 Network Communicator

Electro-Detectors EDA-Z6011 Network Communicator

Electro-Detectors EDA-Z6011 Network CommunicatorThe EDA-Z6011 extends the Radio Range and number of devices on a Zerio Plus Radio Fire Alarm System.For larger premises where the radio range of one system is not greater enough or more than 240 devices are required several systems can be installed and then linked together forming a single system. Using a pair of network communicators each system up to a maximum of eight can be linked with all communications between these systems being channelled through these monitored devices.The EDA-Z601 1 is also powered through the four-core cable so no backup battery is required. Configuration could not be simpler as the communicators are added via the panel menus.There is sufficient space inside the unit to allow easy cable termination using screw terminals. When connecting multiple units terminals for RS485 in and RS485 out are provided.The SMA connector on the unit allows easy fitting of the supplied stub antenna which is locked in place by the enclosure or a weatherproof dipole antenna can be fitted.Indicators on the unit provide information for the supply fault and status.Key FeaturesLinks multiple systems together to form one large systemCompatible with the full range of Zerio Plus PanelsSimple to Set-upMonitored CableLockable AntennaUses RS485 Data ConnectionComplies with all applicable requirements of BS5839 and EN54Dimensions 80mm W x 160mm H x 40mm D

GBP 425.41
1

Electro Detectors Battery Pack for A Series Pre-Millennium Call Points

Electro Detectors Battery Pack for A Series Pre-Millennium Call Points

Electro Detectors Battery Pack for A Series Pre-Millennium Call Points2 Cell lithium battery pack for Electro Detectors Old Type Millennium Manual Call PointsThese batteries are for use with the following A Series Millennium devicesThe Old Type Electro Detectors Millennium Manual Call Points.This battery assembly is for the manual call points where the assembly needs to be physically screwed into the manual call point unit.

GBP 14.58
1

Electro-Detectors EDA-R5100 Radio Multi-sensor Enhanced Smoke

Electro-Detectors EDA-R5100 Radio Multi-sensor Enhanced Smoke

Electro-Detectors EDA-R5100 Radio Multi-sensor Enhanced SmokeThe Electro-Detectors wireless Multi-Detector is part of the Zerio Plus range.The EDA-R5100 smoke detector is fully compliant with the relevant sections of BS5839 and EN54 including Part 25. The detector is supplied complete with its base and battery and just requires two screws to mount the unit on the ceiling.Key FeaturesThis product is fully compliant with BS5839 EN54This product is fully addressableThis device features an optional integrate sounderSmall aesthetic compact product designThis Product is fully compatible with Zerio Plus Panels

GBP 158.59
1