37 results (0,18137 seconds)

Show all filters

Brand

Gender

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Dremel 2.4mm Engraving Cutter REF.107 - 26150107JA

Dremel 2.4mm Engraving Cutter REF.107 - 26150107JA

A high-speed cutter designed for precision rotary engraving. USES: Ideal for detail engraving, carving and routing in wood, fibreglass, ceramics, plastic, jewellery and soft metals. TIPS: Use the sides of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure. Do not use this bit with hardened materials. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed. Shank size 3.2mm Pack Qty 3

GBP 5.19
1

Dremel 1.6mm Engraving Cutter REF.106 - 26150106JA

Dremel 1.6mm Engraving Cutter REF.106 - 26150106JA

A high-speed cutter designed for precision rotary engraving. USES: Ideal for detail engraving, carving and routing in wood, fibreglass, ceramics, plastic, jewellery and soft metals. TIPS: Use the sides of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure. Do not use this bit with hardened materials. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed. Shank size 3.2mm Pack Qty 3

GBP 5.49
1

Dremel 1.9mm Engraving Cutter REF.110 - 26150110JA

Dremel 1.9mm Engraving Cutter REF.110 - 26150110JA

A high-speed cutter designed for precision rotary engraving. USES: Ideal for detail engraving, carving and routing in wood, fibreglass, ceramics, plastic, jewellery and soft metals. TIPS: Use the sides of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure. Do not use this bit with hardened materials. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed. Shank size 3.2mm Pack Qty 3

GBP 6.99
1

Dremel 0.8MM Engraving Cutter REF.111 - 26150111JA

Dremel 0.8MM Engraving Cutter REF.111 - 26150111JA

A high-speed cutter designed for precision rotary engraving. USES: Ideal for detail engraving, carving and routing in wood, fibreglass, ceramics, plastic, jewellery and soft metals. TIPS: Use the sides of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure. Do not use this bit with hardened materials. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed. Shank size 3.2mm Pack Qty 3

GBP 6.59
1

Dremel 0.8mm Engraving Cutter REF.108 - 26150108JA

Dremel 0.8mm Engraving Cutter REF.108 - 26150108JA

A high-speed cutter designed for precision rotary engraving. USES: Ideal for detail engraving, carving and routing in wood, fibreglass, ceramics, plastic, jewellery and soft metals. TIPS: Use the sides of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure. Do not use this bit with hardened materials. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed. Shank size 3.2mm Pack Qty 3

GBP 5.99
1

Dremel 0.8MM Engraving Cutter REF.105 - 26150105JA

Dremel 0.8MM Engraving Cutter REF.105 - 26150105JA

A high-speed cutter designed for precision rotary engraving. USES: Ideal for detail engraving, carving and routing in wood, fibreglass, ceramics, plastic, jewellery and soft metals. TIPS: Use the sides of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure. Do not use this bit with hardened materials. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed. Shank size 3.2mm Pack Qty 3

GBP 5.49
1

Dremel 1.6mm Engraving Cutter REF.113 - 26150113JA

Dremel 1.6mm Engraving Cutter REF.113 - 26150113JA

A high-speed cutter designed for precision rotary engraving. USES: Ideal for detail engraving, carving and routing in wood, fibreglass, ceramics, plastic, jewellery and soft metals. TIPS: Use the sides of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure. Do not use this bit with hardened materials. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed. Shank size 3.2mm Pack Qty 3

GBP 6.09
1

Dremel 9903 Tungsten Carbide Cutter 3.2mm

Dremel 9903 Tungsten Carbide Cutter 3.2mm

9910 Spear Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 3 mm Height: 39 mm Maximum RPM: 30,000 1/min 9911 Egg Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 30 mm Height: 39 mm Maximum RPM: 30,000 1/min 9931 Spear Tip Shank diameter: 3.2 mm Working diameter: 6.4 mm Accessory length: 45 mm Width: 4 mm Length: 4 mm Height: 45 mm Maximum RPM: 35,000 1/min

GBP 10.29
1

Dremel 9910 3.20mm Speer Tip Tungsten Carbide Cutter

Dremel 9910 3.20mm Speer Tip Tungsten Carbide Cutter

9910 Spear Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 3 mm Height: 39 mm Maximum RPM: 30,000 1/min 9911 Egg Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 30 mm Height: 39 mm Maximum RPM: 30,000 1/min 9931 Spear Tip Shank diameter: 3.2 mm Working diameter: 6.4 mm Accessory length: 45 mm Width: 4 mm Length: 4 mm Height: 45 mm Maximum RPM: 35,000 1/min

GBP 9.99
1

Dremel 9911 3.20mm Egg Tip Tungsten Carbide Cutter

Dremel 9911 3.20mm Egg Tip Tungsten Carbide Cutter

9910 Spear Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 3 mm Height: 39 mm Maximum RPM: 30,000 1/min 9911 Egg Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 30 mm Height: 39 mm Maximum RPM: 30,000 1/min 9931 Spear Tip Shank diameter: 3.2 mm Working diameter: 6.4 mm Accessory length: 45 mm Width: 4 mm Length: 4 mm Height: 45 mm Maximum RPM: 35,000 1/min

GBP 9.29
1

Dremel 9931 6.10mm Speer Tip Tungsten Carbide Cutter

Dremel 9931 6.10mm Speer Tip Tungsten Carbide Cutter

9910 Spear Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 3 mm Height: 39 mm Maximum RPM: 30,000 1/min 9911 Egg Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 30 mm Height: 39 mm Maximum RPM: 30,000 1/min 9931 Spear Tip Shank diameter: 3.2 mm Working diameter: 6.4 mm Accessory length: 45 mm Width: 4 mm Length: 4 mm Height: 45 mm Maximum RPM: 35,000 1/min

GBP 17.39
1

Dremel 3.2mm Tungsten Carbide Cutter Square Tip Ref. 9901 - 2615990132

Dremel 3.2mm Tungsten Carbide Cutter Square Tip Ref. 9901 - 2615990132

Manufactured from hgh quality tungsten carbide, these 3.2mm diameter pointed tip cutters are designed for removing excess materials. Suited for use on plastics, steels, woods and non-ferrous materials, the cutters are extremely robust and versatile. Available with either a pointed or square tip. Features and Benefits Suited for engraving and removing materials Durable tip ensures effective removal of excess materials For use on a range of material including plastic, woods, steels and non-ferrous materials Available with either a pointed or square tip Typical Applications Carving Engraving

GBP 8.99
1