mcb.dk | Få success online

Dormer Screw Extractor M8-M12

Product name: M9003 Bolt size: M8 - M12 Drill size for low or medium tensile screws millimeters: 4 mm Drill size for high tensile screws +75 tons/sq.inch millimeters: 4.2 mm Bolt size imperial: 5/16" - 7/16" Drill size for low or medium tensile screws inch: 5/32 Drill size for high tensile screws +75 tons/sq.inch inch: 11/64 Cutting diameter step millimeter: 3.18 mm Cutting diameter second cutting step - millimeters: 6.4 mm Clamping width - millimeter: 4.8 mm Clamping Length - millimeter: 7.5 mm Overall length - millimeter: 68.7 mm Net weight grams: 14

GBP 5.99

1

Dormer Screw Extractor M5-M6

Screw Extractor Material ID: 8430192 Screw extractor is used counter-clockwise to remove broken right-handed bolts from threaded holes without damaging threads. Its necessary to drill guide hole of proper size before using the extractor. High quality carbon steel Able to withstand flex and high torque loads experienced during operation Left Hand spiral flutes Allows Anti-Clockwise rotation to extract broken screws Square Shank Too allow use with standard Tap Wrench Description Product name M9001 Bolt size M5 - M6 Drill size for low or medium tensile screws - millimeters 2 mm Drill size for high tensile screws +75 tons/sq.inch - millimeters 2 mm Bolt size imperial 3/16" -1/4" Drill size for low or medium tensile screws - inch 5/64 Drill size for high tensile screws +75 tons/sq.inch - inch 5/64 Cutting diameter step - millimeter 1.37 mm Cutting diameter second cutting step - millimeters (DC_2) 3.2 mm Clamping width - millimeter (WSC) 2.6 mm Clamping Length - millimeter (LSC) 5.1 mm Overall length - millimeter (OAL) 51.1 mm Net weight - grams 3.04

GBP 7.99

1

Dormer A321 10.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349675 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 10, 3 mm with an overall length of 113 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072219 Product number (SAP) 86044353 Ordering code ANSI A32110.3 Gross weight - grams 51.906 Cutting diameter - millimeter (DC) 10.3 mm Cutting diameter - inch (DC) 0.406 inch Length chip flute - millimeter (LCF) 74 mm Overall length - millimeter (OAL) 113 mm Connection diameter - millimeter (DCON MS) 10.3 mm Length chip flute - inch (LCF) 2.9134 inch

GBP 7.59

1

Dormer A321 9.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349672 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 9 mm with an overall length of 108 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072189 Product number (SAP) 86044350 Ordering code ANSI A3219.0 Gross weight - grams 35.768 Cutting diameter - millimeter (DC) 9 mm Cutting diameter - inch (DC) 0.354 inch Length chip flute - millimeter (LCF) 70 mm Overall length - millimeter (OAL) 108 mm Connection diameter - millimeter (DCON MS) 9 mm Length chip flute - inch (LCF) 2.7559 inch

GBP 4.99

1

Dormer A321 8.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349671 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 8, 5 mm with an overall length of 107 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072172 Product number (SAP) 86044349 Ordering code ANSI A3218.5 Gross weight - grams 31.953 Cutting diameter - millimeter (DC) 8.5 mm Cutting diameter - inch (DC) 0.335 inch Length chip flute - millimeter (LCF) 68 mm Overall length - millimeter (OAL) 107 mm Connection diameter - millimeter (DCON MS) 8.5 mm Length chip flute - inch (LCF) 2.6772 inch

GBP 4.49

1

Dormer A321 9.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349673 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 9, 5 mm with an overall length of 110 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072196 Product number (SAP) 86044351 Ordering code ANSI A3219.5 Gross weight - grams 43.885 Cutting diameter - millimeter (DC) 9.5 mm Cutting diameter - inch (DC) 0.374 inch Length chip flute - millimeter (LCF) 70 mm Overall length - millimeter (OAL) 110 mm Connection diameter - millimeter (DCON MS) 9.5 mm Length chip flute - inch (LCF) 2.7559 inch

GBP 5.29

1

Dormer A321 10.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349674 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 10 mm with an overall length of 113 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072202 Product number (SAP) 86044352 Ordering code ANSI A32110.0 Gross weight - grams 47.3 Cutting diameter - millimeter (DC) 10 mm Cutting diameter - inch (DC) 0.394 inch Length chip flute - millimeter (LCF) 74 mm Overall length - millimeter (OAL) 113 mm Connection diameter - millimeter (DCON MS) 10 mm Length chip flute - inch (LCF) 2.9134 inch

GBP 5.59

1

Dormer A321 10.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349676 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 10, 5 mm with an overall length of 115 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072226 Product number (SAP) 86044354 Ordering code ANSI A32110.5 Gross weight - grams 55.853 Cutting diameter - millimeter (DC) 10.5 mm Cutting diameter - inch (DC) 0.413 inch Length chip flute - millimeter (LCF) 75 mm Overall length - millimeter (OAL) 115 mm Connection diameter - millimeter (DCON MS) 10.5 mm Length chip flute - inch (LCF) 2.9528 inch

GBP 7.99

1

DIGITAL MARKETING

Brand

Colour

Size

Merchant

Price (EUR)