mcb.dk | Få success online

Special Offer - Domus CMX-MULTI MEV Unit

Special Offer - Returned Unit, Fully working and in new condition Domus CMX-MULTI MEV Unit This mechanical extraction ventilation unit is ideal for residential applications, the Domus CMX-MULTI is a unit adapted for installation horizontally or vertically, allowing flexible placement. This unit has a depth of 125mm, making it ideal for areas where space is restricted, such as small ceiling voids. The CMX-MULTI is designed for use in small to medium-sized houses and apartments. The 204x60mm duct connections can be converted to round ducting via the use of additional adaptors if required. Key Features Integral humidistat Very compact, only 125mm deep Very lightweight, 2 years standard parts warranty This unit is available with or without a humidity sensor This unit can be mounted on the floor, wall or ceiling Technical Features Fantastic SFP as low as 0.14 (W/l/s) Max Extract Volume of 409mᶟh Dimensions: 595 x 340 x 125 (mm) 3 inlet spigots at 204x60mm Weight 3.1kg This unit has a low energy, high efficiency EC backward curved centrifugal impeller fan/motor assembly with sealed-for-life bearings suitable for +50°C to -25°C Construction The outer casing is manufactured from expanded polypropylene, reducing both weight and system noise. Due to its compact size, it allows flexible installation Domus CMX-Multi MEV units can be installed horizontally or vertically and is ideal to be fitted inside kitchen/utility room cupboards, directly into a ceiling or loft space or within a joist space.

GBP 270.00

2

Domus HRX-E HERA Heat Recovery Unit

Domus HRX-E HERA Heat Recovery Unit Product Part Number Domus HRXE-HERA-H Opposite Handed - HRXE-HERA-OPH Description The Domus HRXE-HERA-H provides a maximum flow rate of 288m3/hr suitable for a house up to 172 m2 floor area with up to 5 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, Integral Humidity Sensor The Domus unit has an Internal Humidity sensor that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Domus units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Domus units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Domus units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket AV (anti vibration mounting kit) - HRXE-HERA-AV The optional anti vibration kit can be used for both wall and floor Tank Stand The MVHR unit can be positioned on the optional tank stand using the Anti-vibration tray assembly discarding the angle brackets. (7) Angled Brackets The unit can be installed above the floor on a wall angled bracket (8) Accessories Condensation Drain – 297 HEAR Replacement filters SPR428

GBP 1270.67

1

Domus HRX-E AURA Heat Recovery Unit

Domus HRXE-AURA-H Opposite Handed - HRXE-AURA-OPH Description The Domus HRXE-AURA-H provides a maximum flow rate of 320m3/hr suitable for a house up to 190 m2 floor area with up to 5 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems Integral Humidity Sensor The Domus unit has an Internal Humidity sensor that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Domus units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Domus units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Domus units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket AV (anti vibration mounting kit) - HRXE-AURA-AV The optional anti vibration kit can be used for both wall and floor Tank Stand The MVHR unit can be positioned on the optional tank stand using the Anti-vibration tray assembly discarding the angle brackets. (7) Angled Brackets The unit can be installed above the floor on a wall angled bracket (8) Accessories Condensation Drain – 397 Aura Replacement filters SPR428

GBP 1480.66

1

Domus AQH200-B Horizontal 204-60 MVHR Unit

Domus AQH200-B Horizontal 204-60 MVHR Unit Product Part Number Domus AQH200-B Horizontal 204-60 MVHR unit - AQH200-B Description The Domus HRX-AQH200-B is a compact and intelligent ceiling mounted unit and with a height of only 200mm it is suitable for narrow service voids The Controllability is provided by an advanced Bluebrain digital controller and optional room sensors or switches We also advise an optional boost switch should be used local to the wet rooms BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 2-year parts warranty* and lifetime technical support on our top-quality systems Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) Integral Humidity Sensor The integral humidity sensor incorporated within the extract fan chamber will automatically boost both the extract and supply fan, to the commissioned boost speed, when the humidity level exceeds that set by the Bluebrain Controller. CONTROL OPTIONS The Domus units are controlled by one of the following: Bluebrain controller Humidity sensor Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Bluebrain Control Panel The controller comes complete with commissioning and end user functions. 75˝ LCD display Current fan speed Current indoor/outside temperature Indicate when the summer bypass is activated Indicate when frost protection is activated Indicate when the filters require cleaning/changing Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Domus units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Construction Manufactured of EPP for quietness and efficiency Mounting The units are ceiling mounted Accessories Condensation Drain – 297 AQH200 Replacement filters - SPR442 8m Data cable – AQHC-CC8

GBP 1447.80

1

Domus CMX-S MEV Unit

Domus CMX-S MEV Unit Product Part Number Domus CMX-S MEV unit - CMX-S Description Previously known as the Polypipe or Silavent Green Line CMX At just 125mm in depth, the CMX is one of the most versatile, easy to install and energy efficient MEV solutions available on the market. Ideal for installation in a wide range of properties, the CMX offers a depth of just 125mm, making it ideal for small ceiling voids or for where space is restricted. Fits into ceiling voids and utility cupboard spaces – horizontally or vertically The 220x90 duct connectors can be converted to 150 round using additional adaptors if required. Technical Features Max Airflow of 430m3/h Specific Fan Power (SFP) as low as 0.24 wls Dimensions (mm) 710 long x 340 wide x 125 high Fitted with two 220x90 duct connections allowing quick connection to ducts Suitable for a floor area up to 275m² The appliance has a low energy, high efficiency EC backward curved centrifugal impeller fan/motor assembly with sealed for life bearings suitable for +50ºC to -25 ºC. Also referred to as System 3 in Approved Document F of the Building Regulations, an MEV system consists of a centralised ventilation unit that continuously extracts waste, polluted and moist air from wet rooms and can be discreetly positioned in either a cupboard, utility room, ceiling or loft space. An MEV system can be ducted throughout the dwelling and operated by the homeowner through a range of control options. Controllability Typically dual speed, MEV systems provide both low speed continuous trickle ventilation and high-speed boost flow when required. Replacement fresh air is drawn into the dwelling through background ventilators i.e. air inlets, located in the living areas. The potentiometer-controlled speed selector allows accurate setting of 3 airflow speeds The unit has 3 fully variable speeds for trickle and boost, A switched live (LS) can also be used to select boost speed An additional third speed (purge) is available using a second switched live connection. Construction PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels. Accessories ANC848A Manual LOW/BOOST switch Manual BOOST selection switch. LOW speed is engaged upon connection of mains supply. Both speeds are manually adjustable at the wiring centre to facilitate Building Regulation commissioning speeds. ANC849A Manual

GBP 386.03

1

Domus HRXE condensate drain

Domus HRXE condensate drain Product Part Number Domus HRXE condensate drain - 397 Description Drains condensation liquid from the HRXE heat recovery unit.

GBP 124.94

1

Domus HRXE-ZEUS

Domus HRXE-ZEUS Product Part Number Domus HRXE-ZEUS-H Opposite Handed - HRXE-ZEUS-OPH Description The Domus HRXE-ZEUS-H provides a maximum flow rate of 550m3/hr suitable for a house up to 330 m2 floor area with up to 10 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems Integral Humidity Sensor The Domus unit has an Internal Humidity sensor that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Domus units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Domus units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Domus units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket AV (anti vibration mounting kit) - HRXE-XEUS-AV The optional anti vibration kit can be used for both wall and floor Tank Stand The MVHR unit can be positioned on the optional tank stand using the Anti-vibration tray assembly discarding the angle brackets. (7) Angled Brackets The unit can be installed above the floor on a wall angled bracket (8) Accessories Condensation Drain – 297 ZEUS Replacement filters SPR459

GBP 2935.30

1

Domus Adapt 220x90 Equal T with 6 x 75mm

Domus Adapt 220x90 Equal T with 6 x 75mm Product Part Number Domus Adapt Equal T with 6 x 75mm - RDA-6T Description Domus Adapt is a unique duct solution which makes installing residential ventilation as easy and simple as possible. There are 3 T-Pieces available in the range which seamlessly incorporate 220x90mm rigid duct and Ø75mm Radial directly from a centralised mechanical ventilation unit. The RDA-6T has one 220x90mm spigot which can feed up to 6 Ø75mm Radial duct runs.

GBP 47.05

1

Domus Adapt 220x90 branched T with 6 x 75mm

Domus Adapt 220x90 branched T with 6 x 75mm Product Part Number Branched Domus Adapt with 6 x 75mm - RDA-6TB Description Domus Adapt is a unique duct solution which makes installing residential ventilation as easy and simple as possible. There are 3 T-Pieces available in the range which seamlessly incorporate 220x90mm rigid duct and Ø75mm Radial directly from a centralised mechanical ventilation unit. The RDA-6TB has one 220x90mm spigot which can feed up to 6 Ø75mm Radial duct runs and can be installed as either a vertical or horizontal bend.

GBP 47.05

1

Domus RDM-MD220 Radial Manifold (9x75mm)

Domus RDM-MD220 Radial Manifold (9x75mm) Product Part Number Domus MD220 Radial Manifold - RDM-MD220 Main Features The manifold is a specialised component used as a central distribution system. It distributes the air from a Centralised MEV or Heat Recovery unit instead of adjacent to room entry as in traditional branch system. With inherent insulation and sound attenuation properties, this also helps prevent condensation and limit the escape of heat and noise, reducing the requirement for duct silencers. Suitable for most makes of Radial ducting Option to integrate round and rectangular rigid ducting Offers an improved airflow over traditional MVHR ducting methods

GBP 248.77

1

Special Offer - Domus Firestop Oversleeve

Special Offer - Domus Firestop Oversleeve Semi-Rigid Duct Fire-Stopping Sleeve Domus Radial systems are a clever plug and play whole house ventilation solution, which use manifold distribution to evenly service each room through semi-rigid duct. These systems incorporate a centralised mechanical unit; either a Mechanical Ventilation with Heat Recovery (MVHR) or Mechanical Extract Ventilation (MEV). Perfect ventilation choice for all residential dwellings Installation The simple plug and play mechanism between the semi-rigid duct and manifold, as well as the plenum’s clip-on fixing system, make Domus Radialultra-quick to install. As directed in our simple online step-by-step installation guide, the only tools you will require are: Pozidrive screw driver Cutting tool Long reach spanner* Allen key

GBP 24.00

1

Domus 2x75mm Plenum with Flow Control

Domus 2x75mm Plenum with Flow Control with seals Product Part Number Domus Plenum 2x75mm with Flow Control - RDOP-125FC Description Domus Radial systems are a clever plug and play whole house ventilation solution, which use manifold distribution to evenly service each room through semi-rigid duct. These systems incorporate a centralised mechanical unit; either a Mechanical Ventilation with Heat Recovery (MVHR) or Mechanical Extract Ventilation (MEV). Perfect ventilation choice for all residential dwellings Installation The simple plug and play mechanism between the semi-rigid duct and manifold, as well as the plenum’s clip-on fixing system, make Domus Radialultra-quick to install. As directed in our simple online step-by-step installation guide, the only tools you will require are: Pozidrive screw driver Cutting tool Long reach spanner* Allen key

GBP 31.93

1

Domus HRX2D

Domus HRX2D Product Part Number HRX2D Description Easy and Quick Installation: The HRX2D is designed to be easily and quickly installed, which can save time and labor costs during the setup process. Low Specific Fan Powers (0.57W/(l/s)): This indicates that the system is energy-efficient in terms of its fan power consumption. A lower value suggests that it requires less energy to move a given volume of air, which is positive for energy efficiency. High Heat Exchange Efficiency (Up to 94%): A heat exchange efficiency of up to 94% means that the system is highly effective at recovering and utilizing heat from outgoing air to heat incoming air. This can result in energy savings and improved indoor comfort. Lowering Dwelling Emission Rates: By improving heat exchange efficiency and overall system performance, the HRX2D contributes to reducing the Dwelling Emission Rates, which is a positive factor for achieving a higher SAP (Standard Assessment Procedure) rating. A higher SAP rating indicates a more energy-efficient and environmentally friendly building. Bluebrain Controller Comes with Unit: The Bluebrain controller appears to be a component of the HRX2D system, offering various control functions, including: Frost Protection: Ensures that the system operates effectively even in cold weather conditions. Temperature and Humidity Control: Allows for precise control of indoor climate parameters. Auto Thermal Bypass: Likely a feature that optimizes heat exchange processes. Independent Fan Speed Control: Provides flexibility in managing the system's airflow. Air Quality and Commissioning Controls: These controls likely help maintain good indoor air quality and facilitate system commissioning, ensuring it operates at peak performance.

GBP 1744.82

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)