22 results (0,16774 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

DeWalt DT70560T Extreme FlexTorq Screwdriver Bits 25mm + Bit Holder (32 Piece) - Pack of 32

DeWalt DT70560T Extreme FlexTorq Screwdriver Bits 25mm + Bit Holder (32 Piece) - Pack of 32

The Dewalt DT70560T is a Pack of 31 EXTREME FLEXTORQ Assorted 25mm long Screwdriver Bits with a Bit Holder in a Small Storage Case. These Bits withstand the high forces of today's impact drivers, significantly reducing the instances of failure when fixing large screws in place. The full-fit head prevents play and screw head-turning. Features: Extra Small Tough Case containing High Performance 25mm Screwdriver Bits Optimized Tip Geometry for full fitment in the fastener and reduced cam-out Full-fit head eliminates wobble and screw head rounding Impact Ready Contains: 1 magnetic bit holder 1 x 1/4-inch hexagonal adapter 30 screwdriver bits: 8 Phillips bits (PH1, PH2 x5, PH3 x 2) 14 Pozidriv-Bits (PZ1, PZ2 x10, PZ3 x 3) 8 Torx Bits (T15, T20, T25 x 2, T27, T30 x 3) Specification: Number of Pieces: 32 in total Bit Length: 25mm Bit Holder Length: 60mm

GBP 0.00
1

DeWalt D25911K SDS-Max Demolition Hammer 11kg 110V

DeWalt D25911K SDS-Max Demolition Hammer 11kg 110V

D25911K SDS-Max Demolition Hammer 11kg 110V DEWALT D25911K SDS-Max Demolition Hammer with a brushless motor offers increased durability with reduced maintenance. A handy LED service indicator lets you know when its time for a service. Delivers 27 Joules of impact energy for the toughest demolition jobs on site. 12 chisel positions allow you to tailor the orientation of flat chisels. Fitted with an SDS-Max tool holder for a wide variety of readily available accessories. Despite its high performance this demolition hammer has low vibration of 7.0m/s2 thanks to a floating mechanism, for fully encased vibration reduction. Minimises user fatigue and increasing productivity. Compatible with DWH051 dust extraction adaptor for dust-free operation. Specifications: Tool Holder: SDS-Max. Current Input: 16 A. Impact Rate: 8101, 620/bpm, 27 joules. Chisel Positions: 12. Weight: 12.7kg. Technical Specs Tool Holder: SDS-Max. Current Input: 16 A. Impact Rate: 8101, 620/bpm, 27 joules. Chisel Positions: 12. Weight: 12.7kg.

GBP 0.00
1

DeWalt DT7944 Screwdriver Bit Set, 31 Piece DEWDT7944QZ

DeWalt DT7944 Screwdriver Bit Set, 31 Piece DEWDT7944QZ

The DEWALT DT7944 31 Piece Screwdriver Bit Set is supplied in a sturdy plastic re-usable storage container. The bits feature a flexible torsion zone which absorbs torque peaks, and reduces breakage. Contains 6 x 25mm Pozidriv Bits PZ1(x2), PZ2(x3) and PZ3. 5 x 25mm Phillips Bits PH1(x2), PH2(x2) and PH3. 3 x 25mm Slotted Bits 4.5, 5.5 and 6.5mm. 12 x 25mm TORX Bits TX10(x2), TX15(x2), TX20(x2), TX25(x2), TX30(x2) and TX40(x2). 4 x 25mm Hex Bits3, 4(x2) and 5mm. 1 x Quick change magnetic bit tip holder.

GBP 0.00
1

DeWalt DCF903P1 XR Brushless 3/8in Impact Wrench 12V 1 x 5.0Ah Li-ion DEWDCF903P1

DeWalt DCF903P1 XR Brushless 3/8in Impact Wrench 12V 1 x 5.0Ah Li-ion DEWDCF903P1

The DEWALT DCF903 XR Brushless Impact Wrench has a 3/8in square drive with a hog ring that allows quick socket changes. Fitted with an efficient brushless motor that delivers high performance, extends tool life and allows for a much shorter design. It provides up to 340Nm of fastening torque (500Nm breakaway) ensuring the removal of the tightest bolts. Supplied with 1 x 12V 5.0Ah Li-ion Battery, 1 x Charger and 1 x TSTAK Carry Case. Specification Bit Holder 3/8in Hog Ring Anvil No Load Speed 2,850/min. Impact Rate 3,250/bpm Max. Fastening Torque 340Nm Max. Breakaway Torque 500Nm Weight 1kg (without battery)

GBP 0.00
1

DCK2062P2T XR Brushless Twin Pack 18V 2 x 5.0Ah Li-ion

DCK2062P2T XR Brushless Twin Pack 18V 2 x 5.0Ah Li-ion

The DEWALT DCK2062P2TTwin Pack, contains the following: 1 x 18V DCD709 XR Compact Hammer Drill Driver with an efficient brushless motor delivering high performance, extends tool life and allows for a much shorter design. 15 position adjustable torque control provides consistent screw driving into a variety of materials. The 65Nm torque allows you to achieve tough applications. There is also a foot LED with delay feature for better workpiece illumination. Chuck: 13mm.No Load Speed: 0-450/0-1, 650/min.Impact Rate: 0-7, 650/0-28, 050/min.Max Torque: 65Nm.Capacity: Wood 30mm, Steel 13mm, Masonry 13mm. 1 x 18V DCF809 XR Impact Driver with an efficient brushless motor delivering high performance, extends tool life and allows for a much shorter design. Delivers 190Nm of torque for the toughest of applications and extended runtime. Fitted with a 'Drop and Load' bit holder for one-handed operation. Bit Holder: 6.35mm (1/4in) .No Load Speed: 0-2, 800/min.Impact Rate: 0-3, 200/bpm.Max Torque: 190Nm. 1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Voltage: 10.8/14.4/18V.Battery Chemistry: Li-ion.Charging Current: 4.0 A. Also supplied with:2 x 18V 5.0Ah Batteries and 1 x TSTAK Carry Case.

GBP 0.00
1

DCH072L2 12V XR Brushless SDS Plus Hammer Drill (2 x 3.0AH Batteries)

DCH072L2 12V XR Brushless SDS Plus Hammer Drill (2 x 3.0AH Batteries)

Dewalt DCH072L2 12V XR Brushless SDS Plus Hammer Drill (2 x 3.0Ah Batteries) Features: Platform XR 12V Brushless motor provides improved runtime and durability Bright white LED with delay feature improves visibility 1.1J of impact energy, 0-4280 bpm with a no load speed of 0-910 rpm, ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 14mm Comes With: Specification: Hand/Arm Vibration - Hammer drilling into concrete: 9.7 m/s Power Source: Cordless Battery Capacity: 3 Ah Battery Chemistry: XR Li-Ion Tool Holder: SDS-Plus Max. drilling capacity in concrete: 14mm Max. drilling capacity in metal: 10mm Max. drilling capacity in wood: 13mm Impact energy: 1.1J No load speed: 910rpm Height: 176 mm Length: 76 mm Width: 265 mm Uncertainty K 1 (Vibration): 1.5 m/s Weight: 1.7kg

GBP 0.00
1

DeWalt DT70618T-QZ Extreme FlexTorq PZ2x25mm Bits & Drive - Pack of 16

DeWalt DT70618T-QZ Extreme FlexTorq PZ2x25mm Bits & Drive - Pack of 16

The Dewalt DT70618T contains 15 x PZ2 Extreme FLEXTORQ 25mm long Screwdriver Bits and an 80 mm long Magnetic Bit Holder. They come in a Small Bulk Storage Case, part of a System Set offering flexible storage options. The Small Bulk Storage case fits inside the small, medium and large cases as well as the TSTAK compatible accessory caddy. Features: TSTAK compatible to hold all your accessory sets in one place Fits in the TSTAK Caddy Optimized Tip Geometry for full fitment in the fastener and reduced cam-out Full-fit head eliminates wobble and screw head rounding Extreme Impact Ready Includes an impact ready drive guide with an extending sleeve for improved fastener stability and control for use with 25mm screwdriver bits Contains: 15 x PZ2 25mm Bits 1 x Compact Magnetic Drive Guide Drive: 6.35mm / 1/4in hex

GBP 0.00
1

DeWalt DCF897N XR 3/4in Impact Wrench 18V Bare Unit DEWDCF897N

DeWalt DCF897N XR 3/4in Impact Wrench 18V Bare Unit DEWDCF897N

The DEWALT DCF897 XR Impact Wrench with a 3/4in cold forged anvil with hog ring retention pin for durability and allows fast and frequent change of sockets without aligning any pins. Its brushless motor provides durable power and excellent runtime. Features variable speed, 3 speed select control or application specific torque and drive control. It produces a high torque of 950Nm, Break Away at 1,627Nm, delivering excellent performance for various applications. The wrench has an ergonomic grip for comfortable use and has been drop tested for enhanced durability. There is also a super-bright LED on the foot to avoid shadow and casts light at the point of application. Bare Unit, No Battery or Charger Supplied. Specification Bit Holder 3/4in Hog Ring No Load Speed 0-400/1,200/1,900/min. Impact Rate 0-2,400/bpm Max. Torque 950Nm, Breakaway Torque 1,627Nm Weight 2.6kg

GBP 0.00
1

DCD710D2-GB 10.8V XR Li-ion Compact Drill Driver, 2X 2.0AH Battery Packs, 30-Min Charger and Kitbox

DCD710D2-GB 10.8V XR Li-ion Compact Drill Driver, 2X 2.0AH Battery Packs, 30-Min Charger and Kitbox

Featuring 15 torque settings, 2 speed settings, built-in LED, automatic spindle lock, clutch control, a keyless chuck and an ergonomic handle with contoured grip - the feature-packed DeWalt XR Li-Ion Compact Drill Driver Kitbox offers leading reliability, accuracy and power in its class. Contents 2x 2.0Ah X Li-lon battery packs Multi Voltage XR charger Belt hook Magnetic bit holder Heavy duty kitbox Features and Benefits Contoured grip with ergonomic handle for enhanced user comfort 2-speed transmission - provides power when you need it most Compact footprint - only 185mm in length Battery slide pack allows for quick & simple operation White LED provides clear visibility 10mm keyless chuck with automatic spindle lock - engineered to quickly loosen and tighten a tool on the chuck collar Precise clutch control - gives you complete control over the amount of torque applied 15-position adjustable torque settings make this drill incredibly versatile, and suitable for a wide range of jobs

GBP 0.00
1

DeWalt DT71562 Screwdriving Set (32 Piece)

DeWalt DT71562 Screwdriving Set (32 Piece)

50Extra Small Tough Case containing High Performance 25mm Screwdriver Bits With its compact size and outstanding functionality, this 32-piece set is designed to tackle a wide range of applications with precision and ease. Crafted with quality and durability in mind, the Dewalt DT71562-QZ features a robust Tough Case that safeguards and organises the contents during storage and transport. Inside the case, you'll find an array of 25mm screwdriver bits that are engineered to deliver exceptional performance. The set includes various popular bit types, such as Phillips, Pozidriv, and Torx, ensuring compatibility with a wide range of screw heads. The Dewalt DT71562-QZ also comes equipped with a magnetic bit holder, allowing for quick and effortless bit changes. Features: Made from high-quality steel with a titanium coating Durable and long-lasting Includes 32 different bits for a variety of tasks Compact, durable case Benefits: Get the job done right with a set of high-quality screwdriver bits Save time and money by having the right bit for the job Keep your bits organised and protected in a durable case Specification: Pack Qty: 32 piece

GBP 0.00
1

DeWalt DCK266M2T TSTAK Twin Kit 2 x 4.0Ah Li-ion

DeWalt DCK266M2T TSTAK Twin Kit 2 x 4.0Ah Li-ion

The DEWALT DCK266M2T TSTAK Twin Kit, contains the following: 1 x 18V DCD796 XR Brushless Combi Drill which has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless. No Load Speed: 0-550/0-2, 000/min. Impact Rate: 0-9, 350/34, 000/bpm. Torque: 27/70Nm, 15 Settings. Capacity: Masonry/Steel 13mm, Wood 40mm. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in) No Load Speed: 0-1, 000/0-2, 800/0-3, 250/min. Impact Rate: 0-1, 800/0-2, 900/0-3, 800/bpm. Max. Torque: 26/80/205Nm. Weight: 1.56kg. Also supplied with: 1 x 10.8-18V DCB115 Multi-Voltage XR Charger, 2 x 18V 4.0Ah Li-ion Batteries and 1 x TSTAK Case.

GBP 0.00
1

DeWalt DCK2052H2 Powerstack Twin Kit 2 x 5.0Ah Li-ion

DeWalt DCK2052H2 Powerstack Twin Kit 2 x 5.0Ah Li-ion

The DEWALT DCK2052H2 POWERSTACK Twin Kit, contains the following: 1 x 18V DCD999 XR XRP Combi Drill with FlexVolt ADVANTAGE technology. This unique electronic module features pack identification technology. This enables the tool to recognise when an XR FLEXVOLT battery is attached and can unlock even more power. A foot LED with delay feature, provides improved visibility and flashlight functionality. Chuck Capacity: 1.5-13mm. No Load Speed: 0-500/1, 500/2, 250/min. Impact Rate: 38, 250/bpm. Max. Torque: 67Nm. Max. Drilling Capacity: Metal 15mm, Wood 55mm, Masonry 13mm. Weight: 1.6kg (without battery) 1 x 18V DCF850 XR Brushless Impact Driver comes with a 3 mode switch for enhanced control including Precision Drive which prevents damage to the material and fastener in smaller jobs. POWERSTACK batteries deliver 50% more power with a 25% smaller footprint and work with all DEWALT 18V XR tools. Bit Holder: 6.35mm (1/4in) No Load Speed: 0-1, 000/2, 800/3, 250/min. Impact Rate: 3, 800/bpm. Max. Torque: 205Nm. Weight: 0.9kg. Also supplied with: 1 x DCB1104 Charger, 2 x 18V POWERSTACK Li-ion Batteries 5.0Ah &1 x TSTAK Heavy-duty Kitbox.

GBP 0.00
1

DeWalt DCK2052H1 Twin Kit 18V 1 x 1.7Ah & 1 x 5.0Ah Li-ion

DeWalt DCK2052H1 Twin Kit 18V 1 x 1.7Ah & 1 x 5.0Ah Li-ion

The DEWALT DCK2052H1 Twin Kit contains the following: 1 x 18V DCD999 XR XRP Combi Drill comes with FlexVolt ADVANTAGE technology. This unique electronic module features pack identification technology. This enables the tool to recognise when an XR FLEXVOLT battery is attached and to then unlock even more power. A foot LED with delay feature, provides improved visibility and flashlight functionality. Chuck Capacity: 1.5-13mm. No Load Speed: 0-500/1, 500/2, 250/min. Impact Rate: 38, 250/bpm. Max. Torque: 67Nm. Max. Drilling Capacity: Metal 15mm, Wood 55mm, Masonry 13mm. Weight: 1.6kg (without battery) 1 x 18V DCF850E2T XR Brushless Impact Driver comes with a 3 mode switch for enhanced control including Precision Drive which prevents damage to the material and fastener in smaller jobs. POWERSTACK batteries deliver 50% more power with a 25% smaller footprint and they work with all DEWALT 18V XR tools. Bit Holder: 6.35mm (1/4in) No Load Speed: 0-1, 000/2, 800/3, 250/min. Impact Rate: 3, 800/bpm. Max. Torque: 205Nm. Weight: 0.9kg. It is supplied with: 1 x 18V POWERSTACK Li-ion Batteries 1.7Ah. 1 x 18V POWERSTACK Li-ion Batteries 5.0Ah. 1 x DCB1104 Charger. 1 x TSTAK Heavy-duty Kitbox.

GBP 0.00
1

DeWalt DCF922D2T XR BL 1/2in Impact Wrench 18V 2 x 2.0Ah Li-ion DEWDCF922D2T

DeWalt DCF922D2T XR BL 1/2in Impact Wrench 18V 2 x 2.0Ah Li-ion DEWDCF922D2T

The DEWALT DCF922 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with detent pin for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specifications: Bit Holder: 1/2in Detent Pin.No Load Speed: 2,500/min.Impact Rate: 3,600/bpm.Max. Fastening Torque: 406Nm.Nut Busting Torque: 610Nm.Weight: 1.1kg (without battery).

GBP 0.00
1

DCK269P2 XR Brushless Twin Pack 18V 2 x 5.0Ah Li-ion DEWDCK269P2

DCK269P2 XR Brushless Twin Pack 18V 2 x 5.0Ah Li-ion DEWDCK269P2

The DEWALT DCK269P2 XR Twin Pack, contains the following 1 x 18V DCF899 XR Brushless High Torque Impact Wrench with 3 speed and torque settings that gives you the control to best suit your application. The 1/2in (13mm) square drive with detent pin allows for more efficient torque delivery and excellent socket retention. Bit Holder 1/2in Detent Pin. No Load Speed 0-400/0-1,200/0-1,900/min. Impact Rate 0-2,400/min. Max Torque 950Nm, Breakaway Torque 1,625Nm. Max Bolt Diameter M20. Weight 2.62kg. 1 x 18V DCG412 XR Premium Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. No Load Speed 7,000/min. Disc Diameter 125mm, M14 Spindle. Weight 3.0kg. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS300 TOUGHSYSTEM Toolbox.

GBP 0.00
1

DCK305P2T XR Brushless Triple Kit 18V 2 x 5.0Ah Li-ion DEWDCK305P2T

DCK305P2T XR Brushless Triple Kit 18V 2 x 5.0Ah Li-ion DEWDCK305P2T

The DEWALT DCK305P2T XR Brushless Triple Kit, contains the following 1 x 18V DCH273P2 XR Brushless 3 Mode Hammer, fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes Rotary, SDS Hammer, Chisel Only No Load Speed 0-1,100/min. Impact Rate 0-4,600/bpm with 2.1 joules Capacity Wood 26mm, Metal 13mm, Masonry 24mm Weight 3.1kg 1 x 18V DCF887 XR Brushless Impact Driver, equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder 6.35mm (1/4in) No Load Speed 0-1,000/0-2,800/0-3,250/min. Impact Rate 0-1,800/0-2,900/0-3,800/bpm Max. Torque 26/80/205Nm Weight 1.56kg 1 x 18V DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. The 2 position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed 9,000/min. Disc Diameter 125mm, M14 Spindle Weight 1.75kg Also supplied with 2 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Charger, 1 x TSTAK II and 1 x TSTAK VI Deep Toolbox.

GBP 0.00
1

DeWalt D25033K 3 Mode SDS Plus Hammer Drill (110V)

DeWalt D25033K 3 Mode SDS Plus Hammer Drill (110V)

Capable of producing up to 5680 bpm and 2.0 J impact energy, this Dewalt SDS hammer drill is the ideal choice for professionals The Dewalt D25033K 3 mode SDS Plus hammer is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 22 mm in diameter. This model is compact and lightweight yet extremely powerful thanks to the large hammer mechanism which delivers high performance with low stress. This model features a rotation-stop for light chiselling applications in brick, soft masonry and occasionally concrete and impact-stop for drilling in wood, steel, ceramic and screw driving applications. Electronic variable speed ensures total control in any application and the output air slots help protect the user's eye for increased safety upon use. Features: Rotation-stop for light chiselling applications in brick, soft masonry and occasionally concrete Impact-stop for drilling in wood, steel, ceramic and screw driving applications Large hammer mechanism delivers high performance with low stress to the critical components resulting in better durability Mechanical clutch eliminates sudden high-torque reaction should the bit jam Electronic variable speed for total control in any application Rounded ergonomic industrial design allows easy and comfortable handling in any application Improved sealing for maximum protection from dust ingress ensuring long tool life Output air slots designed to protect users' eye Comes with: Multi-position side handle Depth stop Heavy-duty carrying case Specification: Power Input: 710 Watts No Load Speed: 0-1550 rpm Blows per Minute: 0-5680 bpm Impact energy: (EPTA 05/2009) 2.0 J Tool Holder: SDS-Plus Max. Drilling Capacity: [Wood] 30 mm Max. Drilling Capacity: [Metal] 13 mm Max. Drilling Capacity: [Concrete] 22 mm Max. Drilling Capacity: [Core bit] 50 mm Length: 330 mm Height: 210 mm Sound Pressure: 89 dB(A) Sound Pressure Uncertainty: 3.8 dB(A) Sound Power: 100.1 dB(A) Sound Power Uncertainty: 3.8 dB(A) Hand/Arm Vibration - Hammer drilling into concrete: 13.6 m/s_ Hand/Arm Vibration - Chiselling: 12.5 m/s_ Hand/Arm Vibration - Drilling into metal: Hand/Arm Vibration - Screw driving without impact: Uncertainty K 1 (Vibration): 1.5 m/s_ Weight: 2.5 kg

GBP 0.00
1

DeWalt DCK755P3T XR Brushless 7 Piece Kit 18V 3 x 5.0Ah Li-ion DEWDCK755P3T

DeWalt DCK755P3T XR Brushless 7 Piece Kit 18V 3 x 5.0Ah Li-ion DEWDCK755P3T

The DEWALT DCK755P3T XR 7 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15-position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Torque: 27/70Nm, 15 Settings.Capacity: Steel 13mm, Masonry 13mm, Wood 40mm. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max. Torque: 26/80/205Nm.Weight: 1.56kg. 1 x 18V DCS355 XR Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mm.Weight: 1.06kg. 1 x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joulesCapacity: Wood 26mm, Metal 13mm, Masonry 24mmWeight: 3.1kg 1 x 18V DCG405 XR Brushless Grinder with an electronic clutch that reduces the kickback reaction in the event of a pinch or stall. The 2-position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg 1 x 18V DCS570 XR Brushless Circular Saw, ideal for general-purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work. No Load Speed: 5,500/min.Max. Cutting Depth: @90 64mmBlade: 184 x 16mm BoreBevel Capacity: 57 1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45 in both directions. The dust port is AirLock compatible. Strokes No Load: 0-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45Capacity: Wood 135mm, Metal 10mmWeight: 2.1kg Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Li-ion Charger, 2 x TSTAK VI Deep Toolboxes (171195), 1 x TSTAK II Toolbox (Suitcase Flat Top) (170703) and 1 x TSTAK Carrier Base (171229)

GBP 0.00
1

DeWalt DCK623P3 18V XR Brushless Kit, 6 Piece DEWDCK623P3

DeWalt DCK623P3 18V XR Brushless Kit, 6 Piece DEWDCK623P3

The DEWALT DCK623P3 XR Brushless 6 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Compact Combi Drill has an ultra compact, lightweight design. The 2 speed, all metal transmission, provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Max. Torque: 27/70Nm, 15 Settings.Capacity: Steel 13mm, Masonry 13mm, Wood 40mm.Weight: 1.3kg. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max. Torque: 26/80/205Nm.Weight: 1.56kg. 1 x 18V DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kickback reaction in the event of a pinch or stall. The 2 position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 1.75kg. 1 x 18V DCS367 Brushless XR Reciprocating Saw has a compact design that allows for better access to hard to reach cuts. Offers improved balance and ease of handling due to central motor position. The 4 position blade clamp allows for flush cutting and improved versatility. There is a lever action keyless blade clamp for tool-free blade change and an LED work light for improved visibility of cut. No Load Speed: 0-2,900/min.Stroke Length: 28.6mm.Capacity: Wood 300mm, Steel Sections & Pipes 100mm, PVC 160mm.Weight: 2.3kg. 1 x 18V DCS570 XR Brushless Circular Saw, ideal for general purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe 2 handed work. No Load Speed: 5,500/min.Max. Cutting Depth @90: 64mm.Blade: 184 x 16mm Bore.Bevel Capacity: 57. 1 x 18V XR Handheld LED Work Light is perfect for inspecting areas without electricity or natural light. Fitted with variable light settings for maximum brightness or extended runtime and a 250-500 lumen output with broad and even beam pattern. The articulating head has 9 positions for directional control of light output and an extendable hanging hook allows the work light to be suspended during use. Bulb Type: LED.Light Output: 250-500 lumens.Protection Class: IP54. Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Charger and 2 x TOUGHSYSTEM DS300 Toolboxes.

GBP 0.00
1