mcb.dk | Få success online

C-Tec QT605S Quantec Accessible Toilet Reset Point with Sounder

C-Tec QT605S Quantec Accessible Toilet Reset Point with SounderAn addressable Quantec reset pointcw confidence sounder specifically designed for use in BS8300 compliant accessible toilet alarm applications. Includes a redgreen reassurance LED and RESET button with Braille text for cancelling calls.Can be interfaced to aQuantec ceiling pull installed inside the WC and slave overdoor light cw sounder installed outside the WC. Will generate a Standard call tone when its slave ceiling pull is activated and an intermittent call acknowledgement tonewhenthe call is accepted at a Quantec display to let users know help is on the way. Also available as part of ourQT951 Accessible Toilet Alarm kit.

GBP 40.79

1

C-Tec NC809DBBT Conventional Accessible Toilet Reset Point with Sounder

C-Tec NC809DBBT Conventional Accessible Toilet Reset Point with SounderThe NC809DBBT is a remote reset point cw sounder specifically designed for use in Accessible Toilet Alarm systems. The device allows calls generated by an NC807C ceiling pull unit to be cancelled at source i.e. inside the WC.On-board reassurance LED and sounder provide audible and visual indication of an acknowledged call to reassure users that help is on the way calls are acknowledgedaccepted at an NC943B Single Zone Call Controller or an NC91020 Range 10 to 20 Zone Call Controller.Key FeaturesMounts on a standard UK 25mm single gang flush or surface back box.Also available as part of the NC951 Accessible Toilet Alarm kit.

GBP 19.48

1

C-Tec NC951 Conventional Accessible Toilet Alarm Kit to BS8300

C-Tec NC951 Conventional Accessible Toilet Alarm Kit to BS8300The Kit includes everything required for BS8300 clause compliant emergency assistance alarm. Attractively designed and easy to install the NC951 allows a distressed person to raise an alarm in the event of an emergency.To operate the user pulls the cord of a ceiling pull cord to activate a light and sounder outside the WC and on the systems call controller. A new Call Accept facility allows staff to send an intermittent call acknowledgement signal to the WC to confirm help is on the way.The NC951 can be wired in to 4 core stranded security cable but can also be used as a single zone emergency assistance alarm in areas such as changing rooms solariums interview rooms reception areas and more.Kit Contains1 x NC943B 12V 140mA Call Controller cw standby battery and relay1 x NC807C Ceiling Pull Cord1 x NC806CS Overdoor Light cw Sounder1 x NC809DBBT Accessible Toilet Reset Point cw Sounder1 x Accessible WC StickerKey FeaturesThe UKs market-leading Disabled Persons Toilet Alarm kit now with a combined ceiling and wall mountable pull cord unitIncludes everything required for a BS8300 compliant emergency assistance alarmEasy to install simple to useAllows a distressed person to raise an alarm in an emergency. To operate the user pulls the cord of the ceilingwall pull to activate a light and sounder outside the WC and on the systems Call ControllerThe systems Call Accept function allows staff to send an intermittent call acknowledgment signal to the WC to confirm help is on the wayIncludes an NC943B 12V 140mA Call Controller cw standby battery relay NC807C CeilingWall Pull NC806CS Overdoor Light cw Sounder NC809DBBT Accessible Toilet Reset Point cw Sounder NC949 Accessible WC StickerCan be wired in 4 core stranded security cableCan also be used as a single zone assistance alarm in changing rooms solariums interview rooms reception areas more

GBP 116.27

1

C-Tec QT951 Quantec Addressable Accessible Toilet Alarm Kit

C-Tec QT951 Quantec Addressable Accessible Toilet Alarm KitA cost-effective expansion kit that adds true BS8300 compliant accessible toilet alarm functionality to a Quantec Addressable Call System. Includes a QT607 ceiling pull unit a QT605S reset point cw confidence sounder a Quantec slave overdoor light cw sounder and an NC949 Accessible Toilet Sticker.Key FeaturesAllows people in distress to call for help quickly and easily.Call acknowledgement function provides audible visual feedback inside the WC that help is on the way see Operation section below.Staff can Accept alarm calls at a Quantec display.Multiple kits can be used on one Quantec system.Includes a free MRSA resistant anti-bacterial pull cord pack for a limited period only.Backwards compatible.Must be used in conjunction with at least one Quantec Controller.Operating1. The distressed person raises an alarm by pulling the cord on the QT607 Ceiling Pull Unit.Inside the WC The red reassurance LED on the QT607 Ceiling Pull Unit and the reassurance LED and sounder on the QT605S Reset Point cw Sounder pulse Quantecs standard call sequence 0.5 seconds on and 0.5 seconds off to reassure the user the call has been registered.Outside the WC The Alarm LEDs and sounder on the QT606S Overdoor Light cw Sounder pulse Quantecs standard call sequence 0.5 seconds on 0.5 seconds off and a message appears on all relevant Quantec displays as programmed to let staff know someone is in need of assistance.2. The member of staff responding to the Alarm call presses the Call Accept button on a Quantec DisplayInside the WC The reassurance LED and sounder on the QT605S Reset Point cw Sounder pulse Quantecs Call Acknowledged sequence 0.5 seconds on 3 seconds off redgreen to let the user know help is on the way.3. Once assistance has been provided the Alarm call is cancelled from inside the WC by pressing the RESET button on the QT605S Reset Point cw SounderInside and outside the WC All relevant indicators display messages and sounders are extinguished and the calling device returns to its normal state.If the RESET button on the QT605S is NOT pressed when in the call acknowledged state after a period of 1 to 8 minutes as programmed it generates another AlarmStandard call on the system.

GBP 110.95

1

C-Tec QT607 Quantec Slave Ceiling Pull Unit

C-Tec QT607 Quantec Slave Ceiling Pull UnitCan be used to generate a Standard or Ensuite call on aQuantec Addressable Call System. Typically wired as a slave to aQuantec Addressable Call Point or Quantec Accessible Toilet Reset Point. Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm. Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.Key FeaturesSurface mountable.Base fits 16mm conduit and BESA centres.Also available as part of the QT951 Accessible Toilet Expansion Kit.

GBP 21.00

1

C-Tec NC951SS Conventional Stainless-Steel Emergency Assistance Alarm Kit

C-Tec NC951SS Conventional Stainless-Steel Emergency Assistance Alarm KitA high-quality brushedstainless-steel single zone emergency assistance alarm. Allows a distressed person to raise an alarm in the event of an emergency. To operate the user pulls the cord of theceiling pull to activate a light and sounder outside the WC and on the systems Call Controller.Key FeaturesAttractively designed easy to install and simple to useIncludes an NC941SS 12V Stainless Steel Call Controller NC806CSSS Stainless Steel Overdoor Light cw Sounder NC809DBSS Stainless Steel Reset Point and anNC807C PlasticCeiling PullCan be wired in 4 core stranded security cableSuitable for use in some high-profile disabled persons toilet alarm applications. Please note if a fully BS8300 compliant accessible toilet alarm system is required consider using our NC951 standard plastic kit instead

GBP 225.46

1

C-Tec QT606S Quantec Slave Overdoor Light with Sounder

C-Tec QT606S Quantec Slave Overdoor Light with SounderProvides audible and visual indication ofcalls made from a Quantec call point outside bedrooms WCs etc. Flash and sounderrates changeintensify to reflect the urgency of the incoming call.Key FeaturesDual red and green LEDs and triangular diffuser make it highly visible from a distance.Mounts on a standard UK 25mm single gang flush or surface back box.Finished in tough durable ABS plastic.Also available as part of the QT951 Accessible Toilet Alarm kit.

GBP 46.91

1

C-Tec NC806C Conventional Overdoor Light

C-Tec NC806C Conventional Overdoor LightTheNC806Cprovides visual indication of 800 Series Alarm calls outside bedrooms WCs and any other area fitted with an 800 Series calling device. Indicates Standard calls via a constant red light and Emergency calls via a pulsing red light.Key FeaturesDual red LEDs and triangular diffuser make it highly visible from a distanceMounts on a standard UK 25mm single gang flush or surface back boxCan also be used as an area indicator at corridor junctions staff workstations etcFinished in tough durable ABS plasticAlso available as part of the NC951 Accessible Toilet Alarm kit

GBP 21.17

1

C-Tec NC806CS Conventional Overdoor Light amp Sounder

C-Tec NC806CS Conventional Overdoor Light SounderThe NC806CS helps to provide audible and visual indication of 800 Series Alarm calls outside bedrooms WCs and any other area fitted with an 800 Series calling device. It helps to indicate standard calls via a constant toneconstant red light and Emergency calls via a pulsing tonepulsing red light.Key FeaturesDual red LEDs and triangular diffuser make it highly visible from a distanceMounts on a standard UK 25mm single gang flush or surface back boxCan also be used as an area indicator at corridor junctions staff workstations etcFinished in tough durable ABS plasticAlso available as part of the NC951 Accessible Toilet Alarm kit

GBP 33.25

1

C-Tec NC943B Conventional Single Zone Call Controller

C-Tec NC943B Conventional Single Zone Call ControllerThe NC943B is a single zone call controller cw a 12V 140mA PSU and standby battery. The device is fully compatible with C-TECs entire range of 800 Series Call System components.Key FeaturesCapable of indicating standard constant tone and emergency intermittent tone calls.Includes a volume adjustable sounder and a link-selectable Call AcceptReset button.Power on and Alarm CALLING LEDs.Volt-free relay output for the optional connection of externally powered beacons etc relay activates on active call signal.Standby battery provides up to 24 hours standby and 15 minutes alarm running time.Mounts on a standard UK 25mm double gang flush or surface back box.Also available as part of the NC951 Accessible Toilet Alarm Kit.

GBP 106.38

1

C-Tec NC802DEMSS MK4 Stainless Steel Call Point

C-Tec NC802DEMSS MK4 Stainless Steel Call PointThe C-Tec NC802DEMSS is a Stainless-Steel Call Point which has been designed for use with the C-Tec 800 Series Call System. This call point features a magnetic reset facility.The C-Tec 800 Series Conventional Call System is a tried trusted and respected by users and installers alike the C-Tecs 800 Series Call System is ideal for use in all types of private commercial residential and public sector buildings. Incorporating two different disabled persons toilet alarm kits a wide range of indicator panels and an extensive array of system components it is without doubt one of the most versatile and reliable conventional call systems on the market.

GBP 128.05

1

C-Tec NC941SS Conventional Stainless Steel Single Zone Call Controller with PSU amp Reset Button

C-Tec NC941SS Conventional Stainless Steel Single Zone Call Controller with PSU Reset ButtonThe NC941SS is a stainless-steel single zone call controller with a built-in mains to regulated DC power supply providing 250mA at 13.5V. An on-board buzzer reset button and LED indicator are provided making it ideal for all types of single zone call communication applications including disabled persons toilet alarms. The NC941SS is compatible with all 800 Series call points ceiling pulls and remote sounders.Key FeaturesA high-quality brushedstainless-steel single zone call controller cw a 12V 250mA PSUFully compatible with C-TECs entire range of 800 Series Call System componentsCapable of indicating standard constant tone and emergency intermittent tone callsPower On and Alarm CALLING LEDsOpen collector output goes to 12V when the controllers onboard buzzer soundsMounts on a standard UK 40mm double gang flush or surface back box

GBP 171.83

1

C-Tec 16 Line SigTEL Master Controller cw handset. Max 2 x 7Ah batteries ECU-16

C-Tec 16 Line SigTEL Master Controller cw handset. Max 2 x 7Ah batteries ECU-16Designed foruse with our popular SigTEL system the ECU-16 features a new-look high-performance handset to allow operators tocommunicate with up to 16 disabled refuge or firetelephone systems.The controllers powerful networking capabilities also allow up to 14ECU-16 mastercontrollers to be interlinked to create systems of up to224 lines. A separate ECU-224desk control unit can also be connectedtoallow communication with up to 224outstations from a single point.Compatible with C-TECs entire range of Type A Fire Telephone andType B Disabled Refugeoutstations and remote fire telephonehandsets the controller can be easilyinterfaced to NC951 accessibletoilet alarms PDA hearing loop systems strobesCCTV activation relaysand more.Key FeaturesA new 16-line Master Controller for use with our SigTEL disabled refuge fire telephone and stadium marshallingsystem.Allows operators to communicate with up to four disabled refuge or fire telephone outstations.Includes an attractive semi-recessed handset.Improved SigTEL networking capability allow systems of up to 224 lines to be created with optionaladditional desk unit control.Backlit LCD and unique auto-learn facility allows fast system set up.Can be semi-flush mounted using an AFP385 bezel.Operation can be maintained for 24 hours standby and 3 hours in use using 2 x 12V 7 Ahr batteries.Easily interfaced to NC951 accessible toilet alarms PDA range hearingloop systems strobes CCTV activation relays etc.

GBP 1906.25

1

C-Tec ECU-8 SigTEL 8 Line Controller

C-Tec ECU-8 SigTEL 8 Line ControllerFor most people a simple instruction like please leave the building by the nearest available exit can be acted upon quickly and easily. But for wheelchair users the disabled and infirm this isnt always the case. Current Building Regulations recognise this and insist all new non-domestic buildings with more than one storey provide refuge areas relatively safe places where people who cannot easily use fire escapes and evacuation lifts can call for assistance and wait until help arrives.Simple effective two-way communication in these areas is essential firstly to assist rescue teams in determining where assistance is required and secondly to reassure people help is on the way. Communication systems in refuge areas are known as Emergency Voice Communication EVC Systems and SigTEL is suitable for use in all types of EVC application be it a disabled refuge fire telephone or stadium marshalling system. Incredibly easy to use and offering true duplex speech SigTEL meets and exceeds the requirements of standards such as BS 5839 part 9 in all areas and is hugely cost-effective in comparison to other systems on the market.Key FeaturesIdeal for disabled refuge fire telephone and stadium marshalling applications.Allows operators to communicate with up to eightdisabled refuge or fire telephone outstations.Expandable to 16 lines using an ECU-8 expansion unit.Networking facility allows up to four controllers plus any expansion units to be interlinked allowing systems of up to 64 lines to be implemented.Supplied with a backlit LCD and handset.True duplex speech.Unique auto-learn facility allows fast system set up.Can be semi-flush mounted using an AFP385 bezel.Operation can be maintained for 24 hours standby and 3 hours in use using 2 x 12V 7 Ahr batteries.Easily interfaced to NC951 accessible toilet alarms PDA audio-frequency induction loop systems strobes CCTV activation relays etc.

GBP 1374.36

1

C-Tec ECU-4 SigTEL 4 Line Controller

C-Tec ECU-4 SigTEL 4 Line ControllerFor most people a simple instruction like please leave the building by the nearest available exit can be acted upon quickly and easily. But for wheelchair users the disabled and infirm this isnt always the case. Current Building Regulations recognise this and insist all new non-domestic buildings with more than one storey provide refuge areas relatively safe places where people who cannot easily use fire escapes and evacuation lifts can call for assistance and wait until help arrives.Simple effective two-way communication in these areas is essential firstly to assist rescue teams in determining where assistance is required and secondly to reassure people help is on the way. Communication systems in refuge areas are known as Emergency Voice Communication EVC Systems and SigTEL is suitable for use in all types of EVC application be it a disabled refuge fire telephone or stadium marshalling system. Incredibly easy to use and offering true duplex speech SigTEL meets and exceeds the requirements of standards such as BS 5839 part 9 in all areas and is hugely cost-effective in comparison to other systems on the market.Key FeaturesIdeal for disabled refuge fire telephone and stadium marshalling applications.Allows operators to communicate with up to four disabled refuge or fire telephone outstations.Expandable to 12 lines using an ECU-8 expansion unit.Networking facility allows up to four controllers plus any expansion units to be interlinked allowing systems of up to 64 lines to be implemented.Supplied with a backlit LCD and handset.True duplex speech.Unique auto-learn facility allows fast system set up.Can be semi-flush mounted using an AFP385 bezel.Operation can be maintained for 24 hours standby and 3 hours in use using 2 x 12V 7 Ahr batteries.Easily interfaced to NC951 accessible toilet alarms PDA audio-frequency induction loop systems strobes CCTV activation relays etc.

GBP 1076.70

1

C-Tec ECU-8NT SigTEL 8 Line Controller with No Handset

C-Tec ECU-8NT SigTEL 8 Line Controller with No HandsetFor most people a simple instruction like please leave the building by the nearest available exit can be acted upon quickly and easily. But for wheelchair users the disabled and infirm this isnt always the case. Current Building Regulations recognise this and insist all new non-domestic buildings with more than one storey provide refuge areas relatively safe places where people who cannot easily use fire escapes and evacuation lifts can call for assistance and wait until help arrives.Simple effective two-way communication in these areas is essential firstly to assist rescue teams in determining where assistance is required and secondly to reassure people help is on the way. Communication systems in refuge areas are known as Emergency Voice Communication EVC Systems and SigTEL is suitable for use in all types of EVC application be it a disabled refuge fire telephone or stadium marshalling system. Incredibly easy to use and offering true duplex speech SigTEL meets and exceeds the requirements of standards such as BS 5839 part 9 in all areas and is hugely cost-effective in comparison to other systems on the market.Key FeaturesIdeal for disabled refuge fire telephone and stadium marshalling applications.Does not include a handset - ideal for use on networked SigTEL systems that do not require multiple control points.Can be connected to up to eightdisabled refuge or fire telephone outstations.Expandable to 16 lines using an ECU-8 expansion unit.Networking facility allows up to four controllers plus any expansion units to be interlinked allowing systems of up to 64 lines to be implemented.Supplied with a backlit LCD display.Unique auto-learn facility allows fast system set up.Can be semi-flush mounted using an AFP385 bezel.Operation can be maintained for 24 hours standby and 3 hours in use using 2 x 12V 7 Ahr batteries.Easily interfaced to NC951 accessible toilet alarms PDA audio-frequency induction loop systems strobes CCTV activation relays etc.

GBP 1152.70

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)