26 results (0,18293 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

2x C-TEC Dual Input XLR Microphone & Dual Phono Input Plate

2x C-TEC Dual Input XLR Microphone & Dual Phono Input Plate

Combines the functions of anAPXM microphone Outreach plate and an APL dual phono Outreachplate in one double gang device. Accepts balanced or unbalanced microphones with standard 3 pin XLR connectors AND dual phono line level inputs. Gives a more attractive appearance than separate, side-by-side, single gang Outreach Plates. Counts as one of the total of ten plates permitted aspart of C-TECs patented Outreach Plate audio input extension system (see key features section below for details). Compatible with C-TECs entire range of PDA102, 200E, Pro-Rangeand ML1 induction loop amplifiers. Can be connected to any third-party audio or induction loop amplifier using an APV 24V 250mA power supply. Mounts on a 25mm standard UK doublegang back box.

GBP 245.98
1

3x C-TEC Dual Phono Line Level Outreach Plate

3x C-TEC Dual Phono Line Level Outreach Plate

Accepts stereo phono line-level input signals from sources such as TVs. Part of C-TECs patented Outreach Plate audio input extension system (see key features section below for details). Compatible with C-TECs entire range of PDA102, 200E, Pro-Rangeand ML1 induction loop amplifiers. Can be connected to any third-party audio or induction loop amplifier using an APV 24V 250mA power supply. Mounts on a 25mm standard UK single gang back box.

GBP 185.97
1

6x C-TEC Single Gang Jack Plate for EVC401/PH

6x C-TEC Single Gang Jack Plate for EVC401/PH

A single gang jack plate designed for use in conjunction with an EVC401/JPH portable fire telephone handset on compatible SigTEL emergency voice communication systems. Can be mounted on 25mm UK flush or surface single gang back box. When the handset (not supplied) is plugged into the Jack Plate it will call theSigTEL master controller from where a two-way speech channel can be opened and instructions communicated. Multiple jack plates can be connected to a single SigTEL Master Controllerline in stairwells, etc. Designed for use in regions where roaming handsets are accepted (typically the Far and Middle East). UK standard BS5839-9 DOES NOTallow the use ofthese devices. Facilitatesreliable two-way communication in anemergency between a permanently manned control room and key points ofasite.

GBP 239.94
1

8x C-TEC Single Gang Locking Jack Socket for BF320

8x C-TEC Single Gang Locking Jack Socket for BF320

Can be used in conjunction with a BF320 vibrating pillow pad to warnthe hearing impaired of a potential fire alarm or evacuation alert condition. Compatible with all C-TEC fire alarm and evacuation alert systems. Locking mini-XLR connector and plug arrangement helps prevent accidental pillow pad removal. Line monitored for disconnection via aninternal 6k8 end of line resistor(selectable at the BF320JP). Selectable 6K8 (pillow pad) or 27K (jack socket) end of line monitoring options for fire alarm or evacuation alert system use. Can be used on systems with a 10-30V DC voltagerange Fits on a standard UK 25mm back box. Supersedes our old BF364 jack socket.

GBP 199.92
1

3x C-TEC 6.35mm (1/4) Microphone Jack Plate

3x C-TEC 6.35mm (1/4) Microphone Jack Plate

Accepts balanced or unbalanced electret microphones with 6.35mm (1/4) jack plugs . Part of C-TECs patented Outreach Plate audio input extension system (see key features section below for details). Compatible with C-TECs entire range of PDA102, 200E, Pro-Rangeand ML1 induction loop amplifiers. Can be connected to any third-party audio or induction loop amplifier using an APV 24V 250mA power supply. Mounts on a 25mm standard UK single gang back box.

GBP 185.97
1

5x C-TEC Chair Exit Mat

5x C-TEC Chair Exit Mat

Designed to trigger a call by sensing the pressure change when a patient exits a chair. Connects to Quantec via the remote jack socket on a QT637 Enuresis/General Purpose Interface Socket or QT636 Interface Unit. To reduce the risk of nuisance calls, the QT637 includes circuitry that prevents a momentary change in pressure such as a patient quickly changing position from triggering a call. Measures 400mm x 250mmand is supplied with a 2m lead and normally closed right angled jack plug.

GBP 219.95
1

5x C-TEC Enuresis/Bed Wet Sensor

5x C-TEC Enuresis/Bed Wet Sensor

Designed to trigger a call when moisture is detected in a patients bed. Connects to Quantec via the jack socket on the QT637 Enuresis/general purpose interface socket. Typically positioned across and over amattress, directly underneath the bed sheet. Protects against patient discomfort and reduces the number of incontinence checks staff are required to make. Measures 80cm x 12cm and is supplied with a 2m lead and normally open right angled jack plug. Wipe clean design can be re-used many times.

GBP 199.95
1

5x C-TEC Bed Exit Mat

5x C-TEC Bed Exit Mat

Designed to trigger a call by sensing the pressure change when a patient exits a bed. Connects to Quantec via the remote jack socket on a QT637 Enuresis/General Purpose Interface Socket or QT636 Interface Unit. To reduce the risk of nuisance calls, the QT637 includes circuitry that prevents a momentary change in pressure such as a patient quickly changing position from triggering a call. Typically positioned across and overamattress, directly underneath the bedsheet. Measures 80cm x 10cm and is supplied with a 2m lead and normally closed right angled jack plug.

GBP 199.95
1

3x C-TEC APQL 6.35mm (1/4) Line Level Plate

3x C-TEC APQL 6.35mm (1/4) Line Level Plate

Accepts 6.35mm (1/4) jack feeds from audio equipment such as stage or church mixing desks, etc. Part of C-TECs patented Outreach Plate audio input extension system (see key features section below for details). Compatible with C-TECs entire range of PDA102, 200E, Pro-Rangeand ML1 induction loop amplifiers. Can be connected to any third-party audio or induction loop amplifier using an APV 24V 250mA power supply. Mounts on a 25mm standard UK single gang back box.

GBP 209.97
1

12x C-TEC 1.8m (6ft) Tail Call Lead

12x C-TEC 1.8m (6ft) Tail Call Lead

A short 1.8mtail call lead for use with C-TECs Quantec and 800 Series Call Systems. Allows usersto remotely generate Standard calls from armchairs, beds, etc. Comprises a pear-shaped call push, 1.8m (6ft) trailing lead and a 6.35mm remote jack plug. Easily connects to the 6.35mmremote socket on compatible Quantec and 800 Series call points. Activating the pear push or removing the tail call lead from a call points remote socket will generate a Standard call.

GBP 203.88
1

10x C-TEC 4.2m (14ft) Tail Call Lead

10x C-TEC 4.2m (14ft) Tail Call Lead

A long 4.2m tail call lead for use with C-TECs Quantec and 800 Series Call Systems. Allows usersto remotely generate Standard calls from armchairs, beds, etc. Comprises a pear-shaped call push, 4.2m(14ft) trailing lead and a 6.35mm remote jack plug. Easily connects to the 6.35mmremote socket on compatible Quantec and 800 Series call points. Activating the pear push or removing the tail call lead from a call points remote socket will generate a Standard call.

GBP 199.90
1

2x C-TEC Floor Pressure Mat

2x C-TEC Floor Pressure Mat

A durable 90cm x 60cm (3ft x 2ft) floor pressure mat c/w 2m lead and 6.35mm jack plug. Designed to trigger a Standard call on a Quantec or 800 Series Call System when foot pressure is detected. Typically located alongside a bed toalert staff to the prospect of a wandering patient in nursing homes, etc. Can also be used in low-level access control applications. Tough, durable grey PVC finish with a non-slip rubber base. Simple and reliable operation Easily connects to the 6.35mmremote socket on compatible Quantec and 800 Series call points.

GBP 239.98
1

6x C-TEC Standard Call Point, Button Reset c/w Remote Socket

6x C-TEC Standard Call Point, Button Reset c/w Remote Socket

An attractively designed button-operated call/reset point capable of generating Standard calls on an 800 Series Call System. Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device. Red reassurance LED confirms a call has been made. Onboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas). Mounts on a standard UK 25mm single gang flush or surface back box.

GBP 179.94
1

4x C-TEC Emergency Call Point, Button Reset c/w Remote Socket

4x C-TEC Emergency Call Point, Button Reset c/w Remote Socket

An attractively designed button-operated call/reset point capable of generating Standard and Emergency calls on an 800 Series Call System. Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device. Red reassurance LED confirms a call has been made. Onboard reset button cancels Standard and Emergency calls made from the NC802DEB-1/2 and Standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas). Mounts on a standard UK 25mm single gang flush or surface back box.

GBP 211.96
1

C-TEC 200m2 Lecture Room Hearing Loop Kit

C-TEC 200m2 Lecture Room Hearing Loop Kit

Includes a PDA200E hearingloop amplifier, AMT tie/desk microphone, AML lectern microphone, 2 x APJ 3.5mm jack input plates, 2 x 6m Belden cable. Ideal for creatinga high quality induction loop system for a Lecture room. Wall-mountable PDA200E amplifier capable of driving a perimeter loop of up to 200m2. Internal drive, level and metal compensation controls. Two balanced / unbalanced line level inputs, one 100V line input and one microphone input with 12V phantom power for electret microphones. Full compatibility with the Outreach plate audio input extension system. Fully compliant withBS EN 60118-4 when correctly installed. Loop cable not included our LOOP2W 1mm2 cable is suitable for most applications. If in doubt contact our technical department for advice.

GBP 559.99
1