mcb.dk | Få success online

Apollo Orbis I.S. Timesaver Base ORB-MB-50018-APO

Apollo Orbis I.S. Timesaver Base ORB-MB-50018-APOThe Orbis IS TimeSaver Base is a completely new design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure.It is important that the Orbis I.S. detectors be installed in such a way that all terminals and connections are protected to at least IP20 when the detector is in the base. Special care must be taken with the rear of the mounting base where live metal parts may be accessible. Flush mounting of the base on a flat surface will provide the required degree of protection.Key FeaturesGrouped terminals to make wiring easyTwo fixing centresLED alignment markDetector locking mechanism

GBP 8.21

1

Apollo Orbis Intrinsically Safe CR Heat Detector with Flashing LED ORB-HT-51154-APO

Apollo Orbis Intrinsically Safe CR Heat Detector with Flashing LED ORB-HT-51154-APOThe Orbis IS Heat Detector monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The Orbis IS range incorporates seven heat detector classes to suit a wide range of operating conditions.InstallationIt is important that the Orbis I.S. detectors be installed in such a way that all terminals and connections are protected to at least IP20 when the detector is in the base. Special care must be taken with the rear of the mounting base where live metal parts may be accessible. Flush mounting of the base on a flat surface will provide the required degree of protection.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under normal conditionsReduced incidences of false alarmsIncreased reliability of detection

GBP 79.37

1

Apollo Orbis Intrinsically Safe CS Heat Detector with Flashing LED ORB-HT-51156-APO

Apollo Orbis Intrinsically Safe CS Heat Detector with Flashing LED ORB-HT-51156-APOThe Orbis IS Heat Detector monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The Orbis IS range incorporates seven heat detector classes to suit a wide range of operating conditions.InstallationIt is important that the Orbis I.S. detectors be installed in such a way that all terminals and connections are protected to at least IP20 when the detector is in the base. Special care must be taken with the rear of the mounting base where live metal parts may be accessible. Flush mounting of the base on a flat surface will provide the required degree of protection.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under normal conditionsReduced incidences of false alarmsIncreased reliability of detection

GBP 79.37

1

Apollo Orbis Intrinsically Safe A2S Heat Detector with Flashing LED ORB-HT-51148-APO

Apollo Orbis Intrinsically Safe A2S Heat Detector with Flashing LED ORB-HT-51148-APOThe Orbis IS Heat Detector monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The Orbis IS range incorporates seven heat detector classes to suit a wide range of operating conditions.InstallationIt is important that the Orbis I.S. detectors be installed in such a way that all terminals and connections are protected to at least IP20 when the detector is in the base. Special care must be taken with the rear of the mounting base where live metal parts may be accessible. Flush mounting of the base on a flat surface will provide the required degree of protection.Key FeaturesTimeSaver BasePatented FasTest enabling functional testing in four secondsDirtAlert indicates limit of drift compensationTolerates extreme operating conditions -40C to 70 CFalse alarm reductionFlashing LED option

GBP 77.36

1

Apollo Orbis Intrinsically Safe BR Heat Detector with Flashing LED ORB-HT-51150-APO

Apollo Orbis Intrinsically Safe BR Heat Detector with Flashing LED ORB-HT-51150-APOThe Orbis IS Heat Detector monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The Orbis IS range incorporates seven heat detector classes to suit a wide range of operating conditions.InstallationIt is important that the Orbis I.S. detectors be installed in such a way that all terminals and connections are protected to at least IP20 when the detector is in the base. Special care must be taken with the rear of the mounting base where live metal parts may be accessible. Flush mounting of the base on a flat surface will provide the required degree of protection.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under normal conditionsReduced incidences of false alarmsIncreased reliability of detection

GBP 79.37

1

Apollo Orbis Intrinsically Safe BS Heat Detector with Flashing LED ORB-HT-51152-APO

Apollo Orbis Intrinsically Safe BS Heat Detector with Flashing LED ORB-HT-51152-APOThe Orbis IS Heat Detector monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The Orbis IS range incorporates seven heat detector classes to suit a wide range of operating conditions.InstallationIt is important that the Orbis I.S. detectors be installed in such a way that all terminals and connections are protected to at least IP20 when the detector is in the base. Special care must be taken with the rear of the mounting base where live metal parts may be accessible. Flush mounting of the base on a flat surface will provide the required degree of protection.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under normal conditionsReduced incidences of false alarmsIncreased reliability of detection

GBP 79.37

1

Apollo DIN Rail Interface Enclosure 29600-239

Apollo DIN Rail Interface Enclosure - 29600-239The enclosures can be used for housing intrinsically safe IS barriers or DIN-rail mounted interfaces. The enclosures have a frosted polycarbonate lid through which LEDs can be viewed. A multi-purpose label that features a section for use with IS systems is supplied. For non-IS systems the part referring to IS can simply be removed.When using these enclosures with intrinsically safe systems it is important that segregation be provided between the IS and non-IS circuits. A distance of at least 50mm must be preserved between live conducting parts of IS and other circuits. If the enclosure is used as part of an IS circuit then it must always be installed inside the safe area. Never install these enclosures in the hazardous area.The smaller enclosure is suitable for one analogue addressable or two conventional IS circuits or up to four DIN-rail interfaces.Key FeaturesAllows multiple Interfaces to be housed togetherIP67 Rated

GBP 102.76

1

Apollo AlarmSense Manual Call Point 55100-894APO

Apollo 55100-894APO AlarmSense Manual Call PointThe AlarmSense Manual Call Point is compliant with EN 54-11. It is different from other conventional call points in that it can be detected as an operated call point rather than a detector that has changed to the alarm state.Electrical ConsiderationsThe AlarmSense Manual Call Point is designed to operate with AlarmSense compatible control panels.Operating PrinciplesWhen activated the AlarmSense Manual Call Point introduces a load onto the line which is detected by the fire alarm control panel. The control panel then increases the line voltage which activates sounders the manual call point load is then removed.Mechanical ConstructionThe component parts of the call point are moulded in a robust fire retardant polycarbonate.Product InformationThe AlarmSense Manual Call Point is different from other conventional call points in that it can be detected as an operated call point rather than a detector that has changed to the alarm state.Key FeaturesRed LED to signal alarm

GBP 29.06

1

Apollo Orbis I.S Multisensor with Flashing LED ORB-OH-53028-APO

Apollo Orbis I.S Multisensor with Flashing LED ORB-OH-53028-APOThe Orbis IS Multi-sensor Smoke Detector benefits from the same false alarm technology as the Optical Smoke Detector with the addition of a heat sensing element.InstallationIt is important that the Orbis I.S. detectors be installed in such a way that all terminals and connections are protected to at least IP20 when the detector is in the base. Special care must be taken with the rear of the mounting base where live metal parts may be accessible. Flush mounting of the base on a flat surface will provide the required degree of protection.The conduit box available from Apollo part no. 45681-204 is also acceptable for mounting I.S. bases. Apollo also supply a range of deckhead mounting boxes. For more information please refer to PP1089 bases and accessories brochure.Key FeaturesReduces false alarmsSensitive to fast burning flaming firesImproved sensitivity to black smokeCompensation for slow changes in sensitivityAlgorithms for reliability of alarm

GBP 101.82

1

Apollo Orbis Intrinsically Safe A1S Heat Detector with Flashing LED ORB-HT-51158-APO

Apollo Orbis Intrinsically Safe A1S Heat Detector with Flashing LED ORB-HT-51158-APOThe Orbis IS Heat Detector monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The Orbis IS range incorporates seven heat detector classes to suit a wide range of operating conditions.InstallationIt is important that the Orbis I.S. detectors be installed in such a way that all terminals and connections are protected to at least IP20 when the detector is in the base. Special care must be taken with the rear of the mounting base where live metal parts may be accessible.Flush mounting of the base on a flat surface will provide the required degree of protection. The conduit box available from Apollo part no. 45681-204 is also acceptable for mounting I.S. bases. Apollo also supply a range of deckhead mounting boxes.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under normal conditionsReduced incidences of false alarmsIncreased reliability of detection

GBP 77.36

1

Apollo Blank XPert Card for XPander Wireless Range - White 29600-413

Apollo Blank XPert Card for XPander Wireless Range - White 29600-413The 29600-413 is a spare singular blank XPERT card in white which has been designed for use with the XPander range. XPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop.XPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key FeaturesSimplifies and speeds up installation and commissioningAddress remains the same no matter how often detectors are replacedUses patented proven technologyFlexibility to create any address

GBP 0.20

1

Apollo Weatherproof Red Multi-Tone Open-Area Sounder Visual Indicator without Isolator 55000-296APO

Please note This product is currently on an extended leadtime and will be available from June 2024. Pleasecontact usfor further information.Apollo Weatherproof Red Multi-Tone Open-Area Sounder Visual Indicator without Isolator 55000-296APOThe Weatherproof Multi-Tone Open-Area Sounder Visual Indicator is designed for use in outdoor open areas and can be connected to any Discovery or XP95 system. The sounder visual indicator complements Apollos intelligent and integrated base sounders as well as the Multi-Tone Open-Area Sounder.The Multi-tone Open-Area Alarm Devices responds to their own individual address set with a DIL switch. They can also respond to a Group Address which allows multiple sounders to be controlled simultaneously. A group address may be any spare address between 112 and 126 and is selected by means of a 4 segment DIL switch.An Alarm Device under group address control must have an individual address between 1 and 111 otherwise a fault value of 4 is transmitted. Alarm Devices not using the group address facility may be addressed at any address 1126.The Weatherproof Multi-Tone Open-Area Sounder Visual Indicator is designed for use in outdoor open areas and can be connected to any Discovery or XP95 system. The sounder visual indicator complements Apollos intelligent and integrated base sounders as well as the Multi-Tone Open-Area Sounder.Key FeaturesChoice of tones on standard device Apollo Slow Whoop and DINIP66 ratedTwo Volume settings 92dBA and 100dBASynchronisation of alert and evacuate tonesIndividual and group addressing

GBP 174.34

1

Apollo XPander Sounder Beacon and Optical Smoke Detector XPA-CB-14020-APO

Apollo XPander Sounder Beacon and Optical Smoke DetectorXPA-CB-14020-APOXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.OperationXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones including the Apollo tone and a self test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch. Individual parts may be ordered separately.Key Featuresmodern stylingloop-powered interface operating on 868MHzwireless addresses seen by control panel as normal addressesradio base with wireless circuitry and battery compartmentchamber designed to inhibit dirt penetration and thus reduce false alarmsautomatic drift compensation with DirtAlert warningalgorithms for transient alarm rejectionFasTest reduces time taken to test detectors remote test facility3-5 years battery life

GBP 370.69

1

Apollo XPander Red Sounder with Mounting Base - XPA-CB-14001-APO

Apollo XPander Red Sounder with Mounting Base - XPA-CB-14001-APOThe XPander Sounder and Sounder Base is a wireless and designed to be used with XPander detectors and manual call points.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.OperationXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones including the Apollo tone and a self test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch. Individual parts may be ordered separately.Key Features WirelessBi-directional monitored radio platformChoice of 32 selectable tonesAudible self-test availableOutput is between 92 and 106dBA at 1m - dependent on tone setting

GBP 237.64

1

Apollo XPander Sounder Beacon and A1R Heat Detector XPA-CB-14021-APO

Apollo XPander Sounder Beacon and A1R Heat DetectorXPA-CB-14021-APOXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves.The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.OperationXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones including the Apollo tone and a self test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch. Individual parts may be ordered separately.Key Featuresmodern stylingloop-powered interface operating on 868MHzwireless addresses seen by control panel as normal addressesradio base with wireless circuitry and battery compartmentchamber designed to inhibit dirt penetration and thus reduce false alarmsautomatic drift compensation with DirtAlert warningalgorithms for transient alarm rejectionFasTest reduces time taken to test detectorsremote test facility3-5 years battery life

GBP 372.43

1

Apollo XPander Sounder Beacon and CS Heat Detector XPA-CB-14022-APO

Apollo XPander Sounder Beacon and CS Heat DetectorXPA-CB-14022-APOXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves.The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.OperationXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones including the Apollo tone and a self test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch. Individual parts may be ordered separately.Key Featuresmodern stylingloop-powered interface operating on 868MHzwireless addresses seen by control panel as normal addressesradio base with wireless circuitry and battery compartmentchamber designed to inhibit dirt penetration and thus reduce false alarmsautomatic drift compensation with DirtAlert warningalgorithms for transient alarm rejectionFasTest reduces time taken to test detectorsremote test facility3-5 years battery life

GBP 372.43

1

Apollo XPander White Sounder with Mounting Base XPA-CB-14002-APO

Apollo XPander White Sounder with Mounting Base XPA-CB-14002-APOThe XPander Sounder and Sounder Base is wireless and designed to be used with XPander detectors and manual call points.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.OperationXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones including the Apollo tone and a self test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch. Individual parts may be ordered separately.Key Featuresmodern stylingloop-powered interface operating on 868MHzwireless addresses seen by control panel as normal addressesradio base with wireless circuitry and battery compartmentchamber designed to inhibit dirt penetration and thus reduce false alarmsautomatic drift compensation with DirtAlert warningalgorithms for transient alarm rejectionFasTest reduces time taken to test detectorsremote test facility3-5 years battery life

GBP 240.92

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)

Apollo Orbis I.S. Timesaver Base ORB-MB-50018-APO

Apollo Orbis Intrinsically Safe CR Heat Detector with Flashing LED ORB-HT-51154-APO

Apollo Orbis Intrinsically Safe CS Heat Detector with Flashing LED ORB-HT-51156-APO

Apollo Orbis Intrinsically Safe A2S Heat Detector with Flashing LED ORB-HT-51148-APO

Apollo Orbis Intrinsically Safe BR Heat Detector with Flashing LED ORB-HT-51150-APO

Apollo Orbis Intrinsically Safe BS Heat Detector with Flashing LED ORB-HT-51152-APO

Apollo DIN Rail Interface Enclosure 29600-239

Apollo AlarmSense Manual Call Point 55100-894APO

Apollo Orbis I.S Multisensor with Flashing LED ORB-OH-53028-APO

Apollo Orbis Intrinsically Safe A1S Heat Detector with Flashing LED ORB-HT-51158-APO

Apollo Blank XPert Card for XPander Wireless Range - White 29600-413

Apollo Weatherproof Red Multi-Tone Open-Area Sounder Visual Indicator without Isolator 55000-296APO

Apollo XPander Sounder Beacon and Optical Smoke Detector XPA-CB-14020-APO

Apollo XPander Red Sounder with Mounting Base - XPA-CB-14001-APO

Apollo XPander Sounder Beacon and A1R Heat Detector XPA-CB-14021-APO

Apollo XPander Sounder Beacon and CS Heat Detector XPA-CB-14022-APO

Apollo XPander White Sounder with Mounting Base XPA-CB-14002-APO

Powered by Cobiro