64 results (0,12626 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Allied Machine and Engineering 60316H-20CM GEN3SYS S/S Holder

Allied Machine and Engineering 60316H-20CM GEN3SYS S/S Holder

Example from the 16 Series GEN3SYS Holder range Features and Benefits Diameter Range: 12.00mm to 32.00mm. Drill Depth: Available in 3 x , 5 x and 7 x . The unique geometry of the GEN3SYS Drilling System enables excellent chip control. The GEN3SYS High Penetration Drilling System out penetrates by up to 20% faster than other competitive drilling products. The GEN3SYS High Penetration Drilling System has a highly precise locating pad for absolute repeatability and reductions in TIR. The proprietary AM200 coating increases tool life up to 25% above competitors premium coatings. GEN3SYS Replaceable Tip Drilling System is backed by our highly experienced technical staff. The unique design of the GEN3SYS High Penetration Drilling System increases hole quality, surface finish, and true position when compared to other competitive products. The helical margin design of the GEN3SYS enables maximum durability and Stability when cutting forces are applied.

GBP 249.99
1

Allied Machine and Engineering 60716S-20FM GEN3SYS S/S Holder

Allied Machine and Engineering 60716S-20FM GEN3SYS S/S Holder

Example from the 16 Series GEN3SYS Holder range Features and Benefits Diameter Range: 12.00mm to 32.00mm. Drill Depth: Available in 3 x , 5 x and 7 x . The unique geometry of the GEN3SYS Drilling System enables excellent chip control. The GEN3SYS High Penetration Drilling System out penetrates by up to 20% faster than other competitive drilling products. The GEN3SYS High Penetration Drilling System has a highly precise locating pad for absolute repeatability and reductions in TIR. The proprietary AM200 coating increases tool life up to 25% above competitors premium coatings. GEN3SYS Replaceable Tip Drilling System is backed by our highly experienced technical staff. The unique design of the GEN3SYS High Penetration Drilling System increases hole quality, surface finish, and true position when compared to other competitive products. The helical margin design of the GEN3SYS enables maximum durability and Stability when cutting forces are applied.

GBP 299.99
1

Allied Machine and Engineering 60520H-20FM GEN3SYS S/S Holder

Allied Machine and Engineering 60520H-20FM GEN3SYS S/S Holder

The unique geometry of the GEN3SYS Drilling System enables excellent chip control The GEN3SYS High Penetration Drilling System out penetrates by up to 20% faster than other competitive drilling products. The GEN3SYS High Penetration Drilling System has a highly precise locating pad for absolute repeat ability and reductions in TIR. The proprietary AM200 coating increases tool life up to 25% above competitors premium coatings. GEN3SYS Replaceable Tip Drilling System is backed by our highly experienced technical staff The unique design of the GEN3SYS High Penetration Drilling System increases hole quality, surface finish, and true position when compared to other competitive products The helical margin design of the GEN3SYS enables maximum durability and stability when cutting forces are applied Diameter Range 20.00mm to 22.00mm Style: Helical (Machining Centre) Shank diameter: 25mm Shank length: 53.0mm Drill depth: 110.0mm Flat Body length: 144.1mm Overall length: 197.2mm Pipe tap: 1/8"

GBP 209.99
1

Allied Machine and Engineering 60716H-20CM GEN3SYS S/S Holder

Allied Machine and Engineering 60716H-20CM GEN3SYS S/S Holder

Example from the 16 Series GEN3SYS Holder range Features and Benefits Diameter Range: 12.00mm to 32.00mm. Drill Depth: Available in 3 x , 5 x and 7 x . The unique geometry of the GEN3SYS Drilling System enables excellent chip control. The GEN3SYS High Penetration Drilling System out penetrates by up to 20% faster than other competitive drilling products. The GEN3SYS High Penetration Drilling System has a highly precise locating pad for absolute repeatability and reductions in TIR. The proprietary AM200 coating increases tool life up to 25% above competitors premium coatings. GEN3SYS Replaceable Tip Drilling System is backed by our highly experienced technical staff. The unique design of the GEN3SYS High Penetration Drilling System increases hole quality, surface finish, and true position when compared to other competitive products. The helical margin design of the GEN3SYS enables maximum durability and Stability when cutting forces are applied.

GBP 299.99
1

Allied Machine and Engineering 60516H-20FM GEN3SYS S/S Holder

Allied Machine and Engineering 60516H-20FM GEN3SYS S/S Holder

Example from the 16 Series GEN3SYS Holder range Features and Benefits Diameter Range: 12.00mm to 32.00mm. Drill Depth: Available in 3 x , 5 x and 7 x . The unique geometry of the GEN3SYS Drilling System enables excellent chip control. The GEN3SYS High Penetration Drilling System out penetrates by up to 20% faster than other competitive drilling products. The GEN3SYS High Penetration Drilling System has a highly precise locating pad for absolute repeatability and reductions in TIR. The proprietary AM200 coating increases tool life up to 25% above competitors premium coatings. GEN3SYS Replaceable Tip Drilling System is backed by our highly experienced technical staff. The unique design of the GEN3SYS High Penetration Drilling System increases hole quality, surface finish, and true position when compared to other competitive products. The helical margin design of the GEN3SYS enables maximum durability and Stability when cutting forces are applied.

GBP 269.99
1

Allied Machine and Engineering 60516H-20CM GEN3SYS S/S Holder

Allied Machine and Engineering 60516H-20CM GEN3SYS S/S Holder

Example from the 16 Series GEN3SYS Holder range Features and Benefits Diameter Range: 12.00mm to 32.00mm. Drill Depth: Available in 3 x , 5 x and 7 x . The unique geometry of the GEN3SYS Drilling System enables excellent chip control. The GEN3SYS High Penetration Drilling System out penetrates by up to 20% faster than other competitive drilling products. The GEN3SYS High Penetration Drilling System has a highly precise locating pad for absolute repeatability and reductions in TIR. The proprietary AM200 coating increases tool life up to 25% above competitors premium coatings. GEN3SYS Replaceable Tip Drilling System is backed by our highly experienced technical staff. The unique design of the GEN3SYS High Penetration Drilling System increases hole quality, surface finish, and true position when compared to other competitive products. The helical margin design of the GEN3SYS enables maximum durability and Stability when cutting forces are applied.

GBP 269.99
1

Allied Machine and Engineering 60316H-20FM GEN3SYS S/S Holder

Allied Machine and Engineering 60316H-20FM GEN3SYS S/S Holder

Example from the 16 Series GEN3SYS Holder range Features and Benefits Diameter Range: 12.00mm to 32.00mm. Drill Depth: Available in 3 x , 5 x and 7 x . The unique geometry of the GEN3SYS Drilling System enables excellent chip control. The GEN3SYS High Penetration Drilling System out penetrates by up to 20% faster than other competitive drilling products. The GEN3SYS High Penetration Drilling System has a highly precise locating pad for absolute repeatability and reductions in TIR. The proprietary AM200 coating increases tool life up to 25% above competitors premium coatings. GEN3SYS Replaceable Tip Drilling System is backed by our highly experienced technical staff. The unique design of the GEN3SYS High Penetration Drilling System increases hole quality, surface finish, and true position when compared to other competitive products. The helical margin design of the GEN3SYS enables maximum durability and Stability when cutting forces are applied.

GBP 249.99
1

2x Allied Machine and Engineering 38.00mm 3 Series TA Pro Carbide M Geometry AM460 Insert

2x Allied Machine and Engineering 38.00mm 3 Series TA Pro Carbide M Geometry AM460 Insert

These T-A spade drills inserts are an excellent choice for general purpose drilling. The design provides fast penetration rates that produce good hole size and finish. The drills' standard geometry combines highly efficient and stable cutting action to minimize power consumption. Each drill is recommended for use with most steels including 4150, cast irons, high-temperature alloys, and aluminium alloys. Features and Benefits Insert design offers substantial increases in penetration rates and tool life and improves centering, drill stability, and chip formation Provides smoother breakout on through hole applications Carbide construction is suitable for machining a wide range of materials

GBP 285.98
1

Allied Machine and Engineering 24015H-003IS060 Holder

Allied Machine and Engineering 24015H-003IS060 Holder

Series 1 T-A Standard Length - Taper Shank Holders - Helical Flute The T-A Structural Steel system has a range of dedicated inserts and tool holders, which are designed to provide a highly effective solution for the most demanding of applications. Dedicated body diameters to increase rigidity Easily adapted to all major structural steel machines Side and rear coolant for easy adaption A dedicated range of insert grades and geometries for all bolt hole applications Series 0-3 (inclusive) holders and inserts HSS Super Cobalt inserts also available in GEN2 T-A Carbide C1/K35

GBP 249.99
1

Allied Machine and Engineering 24015H-004IS056 Holder

Allied Machine and Engineering 24015H-004IS056 Holder

Series 1 T-A Standard Length - Taper Shank Holders - Helical Flute The T-A Structural Steel system has a range of dedicated inserts and tool holders, which are designed to provide a highly effective solution for the most demanding of applications. Dedicated body diameters to increase rigidity Easily adapted to all major structural steel machines Side and rear coolant for easy adaption A dedicated range of insert grades and geometries for all bolt hole applications Series 0-3 (inclusive) holders and inserts HSS Super Cobalt inserts also available in GEN2 T-A Carbide C1/K35

GBP 259.99
1

Allied Machine and Engineering 24010H-004IS045 Holder

Allied Machine and Engineering 24010H-004IS045 Holder

Series 1 T-A Standard Length - Taper Shank Holders - Helical Flute The T-A Structural Steel system has a range of dedicated inserts and tool holders, which are designed to provide a highly effective solution for the most demanding of applications. Dedicated body diameters to increase rigidity Easily adapted to all major structural steel machines Side and rear coolant for easy adaption A dedicated range of insert grades and geometries for all bolt hole applications Series 0-3 (inclusive) holders and inserts HSS Super Cobalt inserts also available in GEN2 T-A Carbide C1/K35

GBP 259.99
1

Allied Machine and Engineering 24010H-003IS045 Holder

Allied Machine and Engineering 24010H-003IS045 Holder

Series 1 T-A Standard Length - Taper Shank Holders - Helical Flute The T-A Structural Steel system has a range of dedicated inserts and tool holders, which are designed to provide a highly effective solution for the most demanding of applications. Dedicated body diameters to increase rigidity Easily adapted to all major structural steel machines Side and rear coolant for easy adaption A dedicated range of insert grades and geometries for all bolt hole applications Series 0-3 (inclusive) holders and inserts HSS Super Cobalt inserts also available in GEN2 T-A Carbide C1/K35

GBP 249.99
1

Allied Machine and Engineering 24015H-004IS060 Holder

Allied Machine and Engineering 24015H-004IS060 Holder

Series 1 T-A Standard Length - Taper Shank Holders - Helical Flute The T-A Structural Steel system has a range of dedicated inserts and tool holders, which are designed to provide a highly effective solution for the most demanding of applications. Dedicated body diameters to increase rigidity Easily adapted to all major structural steel machines Side and rear coolant for easy adaption A dedicated range of insert grades and geometries for all bolt hole applications Series 0-3 (inclusive) holders and inserts HSS Super Cobalt inserts also available in GEN2 T-A Carbide C1/K35

GBP 259.99
1

Allied Machine and Engineering 24015H-003IS056 Holder

Allied Machine and Engineering 24015H-003IS056 Holder

Series 1 T-A Standard Length - Taper Shank Holders - Helical Flute The T-A Structural Steel system has a range of dedicated inserts and tool holders, which are designed to provide a highly effective solution for the most demanding of applications. Dedicated body diameters to increase rigidity Easily adapted to all major structural steel machines Side and rear coolant for easy adaption A dedicated range of insert grades and geometries for all bolt hole applications Series 0-3 (inclusive) holders and inserts HSS Super Cobalt inserts also available in GEN2 T-A Carbide C1/K35

GBP 249.99
1