15 results (0,13081 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Allied Machine and Engineering 21.5mm 1 Series TiCN Coated Carbide Insert

Allied Machine and Engineering 21.5mm 1 Series TiCN Coated Carbide Insert

These T-A spade drills inserts are an excellent choice for general purpose drilling. The design provides fast penetration rates that produce good hole size and finish. The drills' standard geometry combines highly efficient and stable cutting action to minimize power consumption. Each drill is recommended for use with most steels including 4150, cast irons, high-temperature alloys, and aluminium alloys. Features and Benefits Insert design offers substantial increases in penetration rates and tool life and improves centering, drill stability, and chip formation Provides smoother breakout on through hole applications Super cobalt construction is suitable for machining a wide range of materials

GBP 40.99
1

Allied Machine and Engineering 151N-22.5 22.50mm 5% CO TiCN Coat Insert

Allied Machine and Engineering 151N-22.5 22.50mm 5% CO TiCN Coat Insert

These T-A spade drills inserts are an excellent choice for general purpose drilling. The design provides fast penetration rates that produce good hole size and finish. The drills' standard geometry combines highly efficient and stable cutting action to minimize power consumption. Each drill is recommended for use with most steels including 4150, cast irons, high-temperature alloys, and aluminium alloys. Features and Benefits Insert design offers substantial increases in penetration rates and tool life and improves centering, drill stability, and chip formation Provides smoother breakout on through hole applications Super cobalt construction is suitable for machining a wide range of materials

GBP 40.99
1

Allied Machine and Engineering 15ZN-11.5 11.50mm 5% CO TiCN Coat Insert

Allied Machine and Engineering 15ZN-11.5 11.50mm 5% CO TiCN Coat Insert

These T-A spade drills inserts are an excellent choice for general purpose drilling. The design provides fast penetration rates that produce good hole size and finish. The drills' standard geometry combines highly efficient and stable cutting action to minimize power consumption. Each drill is recommended for use with most steels including 4150, cast irons, high-temperature alloys, and aluminium alloys. Features and Benefits Insert design offers substantial increases in penetration rates and tool life and improves centering, drill stability, and chip formation Provides smoother breakout on through hole applications Super cobalt construction is suitable for machining a wide range of materials

GBP 32.99
1

Allied Machine and Engineering 151N-23.5 23.50mm 5% CO TiCN Coat Insert

Allied Machine and Engineering 151N-23.5 23.50mm 5% CO TiCN Coat Insert

These T-A spade drills inserts are an excellent choice for general purpose drilling. The design provides fast penetration rates that produce good hole size and finish. The drills' standard geometry combines highly efficient and stable cutting action to minimize power consumption. Each drill is recommended for use with most steels including 4150, cast irons, high-temperature alloys, and aluminium alloys. Features and Benefits Insert design offers substantial increases in penetration rates and tool life and improves centering, drill stability, and chip formation Provides smoother breakout on through hole applications Super cobalt construction is suitable for machining a wide range of materials

GBP 40.99
1

Allied Machine and Engineering 15ZN-12.5 12.50mm 5% CO TiCN Coat Insert

Allied Machine and Engineering 15ZN-12.5 12.50mm 5% CO TiCN Coat Insert

These T-A spade drills inserts are an excellent choice for general purpose drilling. The design provides fast penetration rates that produce good hole size and finish. The drills' standard geometry combines highly efficient and stable cutting action to minimize power consumption. Each drill is recommended for use with most steels including 4150, cast irons, high-temperature alloys, and aluminium alloys. Features and Benefits Insert design offers substantial increases in penetration rates and tool life and improves centering, drill stability, and chip formation Provides smoother breakout on through hole applications Super cobalt construction is suitable for machining a wide range of materials

GBP 32.99
1

Allied Machine and Engineering 18YN-.390 9.92mm 8% CO TiCN Coat Insert

Allied Machine and Engineering 18YN-.390 9.92mm 8% CO TiCN Coat Insert

18YN T-A Original Drill Inserts HSS - TiCN Coated HSS - Premium Cobalt Suited for rigid machining applications, used for drilling exotic and high alloy materials, or general use when surface speed needs to be increased. For material hardness up to 400 BHN 139kg. TiCN Coating Excellent choice for wear resistance over low surface speeds High hardness/wear resistance Maximum working temperature 400C Hardness HV 3500 Colour: blue/grey

GBP 37.99
1

Allied Machine and Engineering 18YN-11 11.00mm 8% CO TiCN Coat Insert

Allied Machine and Engineering 18YN-11 11.00mm 8% CO TiCN Coat Insert

18YN T-A Original Drill Inserts HSS - TiCN Coated HSS - Premium Cobalt Suited for rigid machining applications, used for drilling exotic and high alloy materials, or general use when surface speed needs to be increased. For material hardness up to 400 BHN 139kg. TiCN Coating Excellent choice for wear resistance over low surface speeds High hardness/wear resistance Maximum working temperature 400C Hardness HV 3500 Colour: blue/grey

GBP 37.99
1

Allied Machine and Engineering 18YN-10.5 10.50mm 8% CO TiCN Coat Insert

Allied Machine and Engineering 18YN-10.5 10.50mm 8% CO TiCN Coat Insert

18YN T-A Original Drill Inserts HSS - TiCN Coated HSS - Premium Cobalt Suited for rigid machining applications, used for drilling exotic and high alloy materials, or general use when surface speed needs to be increased. For material hardness up to 400 BHN 139kg. TiCN Coating Excellent choice for wear resistance over low surface speeds High hardness/wear resistance Maximum working temperature 400C Hardness HV 3500 Colour: blue/grey

GBP 37.99
1

Allied Machine and Engineering 18YN-0012 9.53mm 8% CO TiCN Coat Insert

Allied Machine and Engineering 18YN-0012 9.53mm 8% CO TiCN Coat Insert

18YN T-A Original Drill Inserts HSS - TiCN Coated HSS - Premium Cobalt Suited for rigid machining applications, used for drilling exotic and high alloy materials, or general use when surface speed needs to be increased. For material hardness up to 400 BHN 139kg. TiCN Coating Excellent choice for wear resistance over low surface speeds High hardness/wear resistance Maximum working temperature 400C Hardness HV 3500 Colour: blue/grey

GBP 37.99
1

Allied Machine and Engineering 18YN-10 10.00mm 8% CO TiCN Coat Insert

Allied Machine and Engineering 18YN-10 10.00mm 8% CO TiCN Coat Insert

18YN T-A Original Drill Inserts HSS - TiCN Coated HSS - Premium Cobalt Suited for rigid machining applications, used for drilling exotic and high alloy materials, or general use when surface speed needs to be increased. For material hardness up to 400 BHN 139kg. TiCN Coating Excellent choice for wear resistance over low surface speeds High hardness/wear resistance Maximum working temperature 400C Hardness HV 3500 Colour: blue/grey

GBP 37.99
1

Allied Machine and Engineering 18YN-10.8 10.80mm 8% CO TiCN Coat Insert

Allied Machine and Engineering 18YN-10.8 10.80mm 8% CO TiCN Coat Insert

18YN T-A Original Drill Inserts HSS - TiCN Coated HSS - Premium Cobalt Suited for rigid machining applications, used for drilling exotic and high alloy materials, or general use when surface speed needs to be increased. For material hardness up to 400 BHN 139kg. TiCN Coating Excellent choice for wear resistance over low surface speeds High hardness/wear resistance Maximum working temperature 400C Hardness HV 3500 Colour: blue/grey

GBP 37.99
1

Allied Machine and Engineering 18YN-.421 10.72mm 8% CO TiCN Coat Insert

Allied Machine and Engineering 18YN-.421 10.72mm 8% CO TiCN Coat Insert

18YN T-A Original Drill Inserts HSS - TiCN Coated HSS - Premium Cobalt Suited for rigid machining applications, used for drilling exotic and high alloy materials, or general use when surface speed needs to be increased. For material hardness up to 400 BHN 139kg. TiCN Coating Excellent choice for wear resistance over low surface speeds High hardness/wear resistance Maximum working temperature 400C Hardness HV 3500 Colour: blue/grey

GBP 37.99
1

Allied Machine and Engineering 151A-17.55 17.55mm 1 Series T-A Original Drill Inserts Super Cobalt - TiAlN Coated

Allied Machine and Engineering 151A-17.55 17.55mm 1 Series T-A Original Drill Inserts Super Cobalt - TiAlN Coated

151A 1 Series Inserts To Suit T-A Replaceable Insert Drilling SystemSuitable for good to rigid machining applications and drilling high alloy and exotic materials. Material hardness up to 350 BHN 121kgFeatures Diameter Range 17.53 to 24.38mm Grade: HSS Super Cobalt TiAlN Coated for wear resistance over high surface speeds,excellent oxidation resistance Maximum working temperature 800CNOTE - 1.5 series inserts fit into both 1 and 1.5 series holders. However, 1 series inserts ONLY fit into 1 series holder

GBP 39.99
1

Allied Machine and Engineering 151A-20.5 20.50MM CPM-T15 1 Series T-a Original Drill Inserts Super Cobalt - TiAlN Coated

Allied Machine and Engineering 151A-20.5 20.50MM CPM-T15 1 Series T-a Original Drill Inserts Super Cobalt - TiAlN Coated

151A 1 Series Inserts To Suit T-A Replaceable Insert Drilling SystemSuitable for good to rigid machining applications and drilling high alloy and exotic materials. Material hardness up to 350 BHN 121kgFeatures Diameter Range 17.53 to 24.38mm Grade: HSS Super Cobalt TiAlN Coated for wear resistance over high surface speeds,excellent oxidation resistance Maximum working temperature 800CNOTE - 1.5 series inserts fit into both 1 and 1.5 series holders. However, 1 series inserts ONLY fit into 1 series holder

GBP 40.99
1

Allied Machine and Engineering 151A-23.7 23.70mm CPM-T15 1.5 Series T-A Original Drill Inserts Super Cobalt - TiAlN Coated

Allied Machine and Engineering 151A-23.7 23.70mm CPM-T15 1.5 Series T-A Original Drill Inserts Super Cobalt - TiAlN Coated

151A 1 Series Inserts To Suit T-A Replaceable Insert Drilling SystemSuitable for good to rigid machining applications and drilling high alloy and exotic materials. Material hardness up to 350 BHN 121kgFeatures Diameter Range 17.53 to 24.38mm Grade: HSS Super Cobalt TiAlN Coated for wear resistance over high surface speeds,excellent oxidation resistance Maximum working temperature 800CNOTE - 1.5 series inserts fit into both 1 and 1.5 series holders. However, 1 series inserts ONLY fit into 1 series holder

GBP 39.99
1