167 results (0,14468 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Advanced MxPro5 MXP-544 P-BUS 8-Way Relay Card

Advanced MxPro5 MXP-544 P-BUS 8-Way Relay Card

Advanced MxPro5 MXP-544 P-BUS 8-Way Relay CardThe MXP-544 Peripheral 8-Way Relay Card is an internal module intended for use with the Mx-5000 range of fire alarm control panels.Each card provides 8 configurable relay outputs 2 x FORM C 6 x FORM A. Up to 16 cards may be connected to a panel allowing for an extra 128 relay outputs SELV.The MXP-544 is configured using a positive action sequence involving the on-board push button and LED indicators.This allows the module to be safely configuredinspected while adding an extra reporting capability not previously available to peripheral modules. Cards are protocol independent.Key FeaturesPowered from CIE on local PSUProvides 8 configurable relay outputsUp to 16 cards can be connected to the peripheral bus 128 relays

GBP 318.44
1

Advanced MxPro5 MXP-544F P-BUS 8-Way Relay Card Fitted

Advanced MxPro5 MXP-544F P-BUS 8-Way Relay Card Fitted

Advanced MxPro 5 MXP-544F P-BUS 8-Way Relay Card FittedThe MXP-544 Peripheral 8-Way Relay Card is an internal module intended for use with the Mx-5000 range of fire alarm control panels.Each card provides 8 configurable relay outputs 2 x FORM C 6 x FORM A. Up to 16 cards may be connected to a panel allowing for an extra 128 relay outputs SELV.The MXP-544 is configured using a positive action sequence involving the on-board push button and LED indicators.This allows the module to be safely configuredinspected while adding an extra reporting capability not previously available to peripheral modules. Cards are protocol independent.Key FeaturesPowered from CIE on local PSUProvides 8 configurable relay outputsUp to 16 cards can be connected to the peripheral bus 128 relays

GBP 318.44
1

Advanced MxPro 5 MXP-537 P-BUS 10-Way Switch Input Card

Advanced MxPro 5 MXP-537 P-BUS 10-Way Switch Input Card

Advanced MxPro 5 MXP-537 P-BUS 10-Way Switch Input CardThe Programmable 10 Way Input Card is an optional peripheral unit that provides ten individually programmable monitored switch inputs. Up to 16 cards can be connected to an MxPro 5 series panel providing a maximum of up to 160 additional monitored inputs. Each input is fully programmable using the powerful dynamic cause-and-effect rules. The unit is available as either a printed circuit card only or as a boxed unit.Applications LimitationsEN54-18 approved switch monitor circuit.Key FeaturesEach input is monitored for open and short circuit.Each input is individually programmable for Fire Fault Alarm etc.Up to 16 cards can be connected providing a total of 160 additional switch inputs.Easily configured via PC-NET-0033 year warranty as standard

GBP 407.75
1

Advanced MxPro 5 MXP-536 P-BUS 8 Way Conventional Zone Card

Advanced MxPro 5 MXP-536 P-BUS 8 Way Conventional Zone Card

Advanced MxPro 5 MXP-536 P-BUS 8 Way Conventional Zone CardThe Programmable 8-Zone Monitor Card is an optional peripheral unit that provides eight individually programmable zone monitor circuits compliant with BSEN54- 18 1998 Clause 7.8. Up to 16 cards can be connected to a multi-loop panel providing a maximum of up to 128 additional zone monitor circuits. Each zone is fully programmable using the powerful dynamic cause-and-effect rules. The unit is available as either a printed circuit card only.Applications LimitationsEN54-18 compliant zone monitor circuit.Key Features8 zone circuits - each zone is monitored for open and short circuitEach zone is individually programmable with the available dynamic cause-and-effect rulesUp to 16 cards can be connected giving a total of 128 additional zone monitors1 relay output for reset128 zone monitor circuits per panelEasily configured via PC-NET-0033 year warranty as standard

GBP 467.81
1

Advanced MxPro 5 MXP-538 P-BUS 16-Way Switch Form Factor Module

Advanced MxPro 5 MXP-538 P-BUS 16-Way Switch Form Factor Module

Advanced MxPro 5 MXP-538 P-BUS 16-Way Switch Form Factor ModuleThe 16-way Switch 48 LED Card is an expansion peripheral that offers 16 inputs and 48 outputs that can be configured via the Advanced PC Config Tool. This additional PCB provides a cost effective solution to providing 16 individually programmable push buttons for controlling fire alarm equipment.Up to 16 cards can be connected to a MxPro 5 series panel providing a maximum of 256 push buttons and 768 LED outputs. Each LED output can be individually assigned to an output group to provide full support for dynamic zoning and to indicate when the buttons have been activated.ApplicationsIdeal for any application where a number of programmable push button switches are required for evacuation and plant control.Key Features16 configurable push buttons48 Programmable LEDs 3 x LEDs per push button red green yellowConfigurable buzzerFast input responseUp to 16 switch plates for each control panel

GBP 374.58
1

Advanced MxPro 5 MXP-539 P-BUS Mimic Driver Card 16 Inputs amp 48 Outputs

Advanced MxPro 5 MXP-539 P-BUS Mimic Driver Card 16 Inputs amp 48 Outputs

Advanced MxPro 5 MXP-539 P-BUS Mimic Driver Card 16 Inputs 48 OutputsThe 16-way Switch 48 LED Card is an expansion peripheral that offers 16 inputs and 48 outputs that can be configured via the Advanced PC Config Tool. This additional PCB provides a cost effective solution to providing 16 individually programmable push buttons for controlling fire alarm equipment.Up to 16 cards can be connected to an MxPro 5 series panel providing a maximum of 256 push buttons and 768 LED outputs. Each LED output can be individually assigned to an output group to provide full support for dynamic zoning and to indicate when the buttons have been activated.ApplicationsIdeal for any application where a number of programmable push button switches are required for evacuation and plant control.Key Features6 configurable clean-contact inputs48 programmable LED driver outputsConfigurable buzzerFast input responseUp to 16 switch plates for each control panelNo network interface required

GBP 330.30
1

Advanced MX-5404AE 1-4 Loop Fire Panel - 4 Loop Cards - Extended CoreProtocol

Advanced MX-5404AE 1-4 Loop Fire Panel - 4 Loop Cards - Extended CoreProtocol

Advanced MX-5404AE 1-4 Loop Fire Panel - 4 Loop Cards - Extended CoreProtocolThe MxPro 5 series is fully expandable from 1 to 4 loops and supplied with 4 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 System LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select and click programming aid for engineer configuration and end-user operation.Compatible with AdvancedLive UKI only which is the fire panel monitoring solution that enables secure easy real-time management of an Advanced fire system. Powerful cause-and-effect programming and enhanced trace diagnostics make the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable onsite via the onboard alphanumeric keypad or PC-NeT-022 configuration software.Key FeaturesConnectivity to AdvancedLive UKI only Ethernet connection on-board20 programmable Zonal 25 System LEDs.Apollo Argus Vega Hochiki Nittan Evolution protocol support.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware.Dedicated USB RS232 serial port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and Onboard Scope facility for ease of commissioning and fault finding.The graphical display can be configured to operate with virtually any language or character set and allow the installers logo to be applied using the Logo application software.Integral P-Bus for system expansion via available option cards.Advanced networking peer-to-peer system with up to 2000 zonesProgrammable push buttonsRack-mount optionsGlobal compliance3-year warrantyFully programmableInstallers logo application

GBP 2685.85
1

Advanced MX-5403AE 1-4 Loop Fire Panel - 3 Loop Cards - Extended CoreProtocol

Advanced MX-5403AE 1-4 Loop Fire Panel - 3 Loop Cards - Extended CoreProtocol

Advanced MX-5404AE 1-4 Loop Fire Panel - 4 Loop Cards - Extended CoreProtocolThe MxPro 5 series is fully expandable from 1 to 4 loops and supplied with 4 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 System LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select and click programming aid for engineer configuration and end-user operation.Compatible with AdvancedLive UKI only which is the fire panel monitoring solution that enables secure easy real-time management of an Advanced fire system. Powerful cause-and-effect programming and enhanced trace diagnostics make the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable onsite via the onboard alphanumeric keypad or PC-NeT-022 configuration software.Key FeaturesConnectivity to AdvancedLive UKI only Ethernet connection on-board20 programmable Zonal 25 System LEDs.Apollo Argus Vega Hochiki Nittan Evolution protocol support.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware.Dedicated USB RS232 serial port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and Onboard Scope facility for ease of commissioning and fault finding.The graphical display can be configured to operate with virtually any language or character set and allow the installers logo to be applied using the Logo application software.Integral P-Bus for system expansion via available option cards.Advanced networking peer-to-peer system with up to 2000 zonesProgrammable push buttonsRack-mount optionsGlobal compliance3-year warrantyFully programmableInstallers logo application

GBP 2494.21
1

Advanced MxPro5 MX-5101D 1-Loop Fire Panel in Large-Deep Enclosure

Advanced MxPro5 MX-5101D 1-Loop Fire Panel in Large-Deep Enclosure

Advanced MxPro5 MX-5101D 1-Loop Fire Panel in Large-Deep EnclosureThe MxPro5 series control panels are supplied with a single loop driver card 2 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software.An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro5 series fire panels. The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored.Simply adding a network card allows the panel to communicate with any other MxPro5 fire panel remote terminal or network peripheral such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable zonal 25 System LEDsApollo Argus Vega Hochiki Nittan Evolution protocol supportAdvanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardwareDedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn LoopDetection and On-board Scope facilityGraphical display configurable for virtually any languageRobust removable equipment chassis with plug-in connectors for simple fixing and cable terminationIntegral P-Bus for system expansion via available option cardsAd-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1225.43
1

Advanced MxPro5 MX-5101L 1-Loop Fire Panel in Large Enclosure

Advanced MxPro5 MX-5101L 1-Loop Fire Panel in Large Enclosure

Advanced MxPro5 MX-5101L 1-Loop Fire Panel in Large EnclosureThe MxPro5 series control panels are supplied with a single loop driver card 2 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software.An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro5 series fire panels. The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored.Simply adding a network card allows the panel to communicate with any other MxPro5 fire panel remote terminal or network peripheral such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable zonal 25 System LEDsApollo Argus Vega Hochiki Nittan Evolution protocol supportAdvanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardwareDedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn LoopDetection and On-board Scope facilityGraphical display configurable for virtually any languageRobust removable equipment chassis with plug-in connectors for simple fixing and cable terminationIntegral P-Bus for system expansion via available option cardsAd-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1166.66
1

Advanced MxPro5 MX-5101NL 1-Loop Fire Panel in Large Enclosure Nittan Evolution Protocol

Advanced MxPro5 MX-5101NL 1-Loop Fire Panel in Large Enclosure Nittan Evolution Protocol

Advanced MxPro5 MX-5101NL 1-Loop Fire Panel in Large Enclosure Nittan Evolution ProtocolThe MxPro5 series control panels are supplied with a single loop driver card 2 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software.An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro5 series fire panels. The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored.Simply adding a network card allows the panel to communicate with any other MxPro5 fire panel remote terminal or network peripheral such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable zonal 25 System LEDsApollo Argus Vega Hochiki Nittan Evolution protocol supportAdvanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardwareDedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn LoopDetection and On-board Scope facilityGraphical display configurable for virtually any languageRobust removable equipment chassis with plug-in connectors for simple fixing and cable terminationIntegral P-Bus for system expansion via available option cardsAd-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1166.66
1

Advanced MxPro5 MX-5101ND 1-Loop Fire Panel in Large-Deep Enclosure Nittan Evolution Protocol

Advanced MxPro5 MX-5101ND 1-Loop Fire Panel in Large-Deep Enclosure Nittan Evolution Protocol

Advanced MxPro5 MX-5101ND 1-Loop Fire Panel in Large-Deep Enclosure Nittan Evolution ProtocolThe MxPro5 series control panels are supplied with a single loop driver card 2 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software.An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro5 series fire panels. The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored.Simply adding a network card allows the panel to communicate with any other MxPro5 fire panel remote terminal or network peripheral such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable zonal 25 System LEDsApollo Argus Vega Hochiki Nittan Evolution protocol supportAdvanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardwareDedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn LoopDetection and On-board Scope facilityGraphical display configurable for virtually any languageRobust removable equipment chassis with plug-in connectors for simple fixing and cable terminationIntegral P-Bus for system expansion via available option cardsAd-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1225.43
1

Advanced MX-5101A 1 Loop MxPro5 Fire Control Panel - Small Core Protocol

Advanced MX-5101A 1 Loop MxPro5 Fire Control Panel - Small Core Protocol

Advanced MX-5101A 1 Loop MxPro5 Fire Control Panel - Small Core ProtocolThe MxPro 5 series control panels are supplied with a single loop driver card 2 on board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. The panel is fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software. An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels.The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored. Simply adding a network card allows the panel to communicate with any other MxPro 5 fire panel remote terminal or network periferal such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable Zonal 25 System LEDs.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing fullEN54 compliance without additional hardware.Dedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and On-board Scope facility.Graphical display configurable for virtually any language.Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination.Integral P-Bus for system expansion via available option cards.Ad-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1051.96
1

Advanced MX-5101AM 1 Loop MxPro5 Fire Control Panel - Medium Core Protocol

Advanced MX-5101AM 1 Loop MxPro5 Fire Control Panel - Medium Core Protocol

Advanced MX-5101AM 1 Loop MxPro5 Fire Control Panel - Medium Core ProtocolThe MxPro 5 series control panels are supplied with a single loop driver card 2 on board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. The panel is fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software. An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels.The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored. Simply adding a network card allows the panel to communicate with any other MxPro 5 fire panel remote terminal or network periferal such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable Zonal 25 System LEDs.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing fullEN54 compliance without additional hardware.Dedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and On-board Scope facility.Graphical display configurable for virtually any language.Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination.Integral P-Bus for system expansion via available option cards.Ad-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1109.32
1

Advanced MxPro5 MX-5101NM 1-Loop Fire Panel in Medium Enclosure Nittan Evolution Protocol

Advanced MxPro5 MX-5101NM 1-Loop Fire Panel in Medium Enclosure Nittan Evolution Protocol

Advanced MxPro5 MX-5101NM 1-Loop Fire Panel in Medium Enclosure Nittan Evolution ProtocolThe MxPro5 series control panels are supplied with a single loop driver card 2 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software.An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro5 series fire panels. The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored.Simply adding a network card allows the panel to communicate with any other MxPro5 fire panel remote terminal or network peripheral such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable zonal 25 System LEDsApollo Argus Vega Hochiki Nittan Evolution protocol supportAdvanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardwareDedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn LoopDetection and On-board Scope facilityGraphical display configurable for virtually any languageRobust removable equipment chassis with plug-in connectors for simple fixing and cable terminationIntegral P-Bus for system expansion via available option cardsAd-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1109.32
1

Advanced MxPro5 MX-5101M 1-Loop Fire Panel in Medium Enclosure

Advanced MxPro5 MX-5101M 1-Loop Fire Panel in Medium Enclosure

Advanced MxPro5 MX-5101M 1-Loop Fire Panel in Medium EnclosureThe MxPro5 series control panels are supplied with a single loop driver card 2 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software.An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro5 series fire panels. The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored.Simply adding a network card allows the panel to communicate with any other MxPro5 fire panel remote terminal or network peripheral such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable zonal 25 System LEDsApollo Argus Vega Hochiki Nittan Evolution protocol supportAdvanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardwareDedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn LoopDetection and On-board Scope facilityGraphical display configurable for virtually any languageRobust removable equipment chassis with plug-in connectors for simple fixing and cable terminationIntegral P-Bus for system expansion via available option cardsAd-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1109.32
1

Advanced MxPro5 MX-5101NR 19quot Rack Mount FACP Nittan Evolution Protocol

Advanced MxPro5 MX-5101NR 19quot Rack Mount FACP Nittan Evolution Protocol

Advanced MxPro5 MX-5101NR 19 Rack Mount FACP Nittan Evolution ProtocolThe MxPro5 series control panels are supplied with a single loop driver card 2 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software.An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro5 series fire panels. The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored.Simply adding a network card allows the panel to communicate with any other MxPro5 fire panel remote terminal or network peripheral such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable zonal 25 System LEDsApollo Argus Vega Hochiki Nittan Evolution protocol supportAdvanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardwareDedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn LoopDetection and On-board Scope facilityGraphical display configurable for virtually any languageRobust removable equipment chassis with plug-in connectors for simple fixing and cable terminationIntegral P-Bus for system expansion via available option cardsAd-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1072.80
1

Advanced MxPro5 MX-5101R 1-Loop 19quot Rack Mount FACP

Advanced MxPro5 MX-5101R 1-Loop 19quot Rack Mount FACP

Advanced MxPro5 MX-5101R 1-Loop 19 Rack Mount FACPThe MxPro5 series control panels are supplied with a single loop driver card 2 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software.An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro5 series fire panels. The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored.Simply adding a network card allows the panel to communicate with any other MxPro5 fire panel remote terminal or network peripheral such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable zonal 25 System LEDsApollo Argus Vega Hochiki Nittan Evolution protocol supportAdvanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardwareDedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn LoopDetection and On-board Scope facilityGraphical display configurable for virtually any languageRobust removable equipment chassis with plug-in connectors for simple fixing and cable terminationIntegral P-Bus for system expansion via available option cardsAd-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1072.80
1

Advanced MX-5201AD 1-2 Loop MxPro5 Fire Control Panel With 1 Loop Card - Deep Core Protocol

Advanced MX-5201AD 1-2 Loop MxPro5 Fire Control Panel With 1 Loop Card - Deep Core Protocol

Advanced MX-5201AD 1-2 Loop MxPro5 Fire Control Panel With 1 Loop Card - Deep Core ProtocolThe MxPro 5 series control panels are supplied with a single loop driver card 2 on board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. The panel is fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software. An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels.The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored. Simply adding a network card allows the panel to communicate with any other MxPro 5 fire panel remote terminal or network periferal such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable Zonal 25 System LEDs.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing fullEN54 compliance without additional hardware.Dedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and On-board Scope facility.Graphical display configurable for virtually any language.Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination.Integral P-Bus for system expansion via available option cards.Ad-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13Please note The image is for illustrative purposes only.

GBP 1467.46
1

Advanced MX-5402A 1-4 Loop MxPro5 Fire Control Panel With 2 Loop Cards - Large Core Protocol

Advanced MX-5402A 1-4 Loop MxPro5 Fire Control Panel With 2 Loop Cards - Large Core Protocol

Advanced MX-5402A 1-4 Loop MxPro5 Fire Control Panel With 2 Loop Cards - Large Core ProtocolThe MxPro 5 series control panels are supplied with a single loop driver card 2 on board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. The panel is fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software. An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels.The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored. Simply adding a network card allows the panel to communicate with any other MxPro 5 fire panel remote terminal or network periferal such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable Zonal 25 System LEDs.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing fullEN54 compliance without additional hardware.Dedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and On-board Scope facility.Graphical display configurable for virtually any language.Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination.Integral P-Bus for system expansion via available option cards.Ad-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13Please note The image is for illustrative purposes only.

GBP 2095.55
1

Advanced MxPro5 MX-5101VD 1 Loop Fire Panel in Large-Deep Enclosure Argus Vega Protocol

Advanced MxPro5 MX-5101VD 1 Loop Fire Panel in Large-Deep Enclosure Argus Vega Protocol

Advanced MxPro5 MX-5101VD 1 Loop Fire Panel in Large-Deep Enclosure Argus Vega ProtocolThe MxPro5 series control panels are supplied with a single loop driver card 2 on board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. The panel is fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software. An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels.The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored. Simply adding a network card allows the panel to communicate with any other MxPro 5 fire panel remote terminal or network periferal such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable zonal 25 System LEDs.Apollo Argus Vega Hochiki Nittan Evolution protocol support.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing fullEN54 compliance without additional hardware.Dedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and On-board Scope facility.Graphical display configurable for virtually any language.Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination.Integral P-Bus for system expansion via available option cards.Ad-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1225.43
1

Advanced MX-5403A 1-4 Loop MxPro5 Fire Control Panel With 3 Loop Cards - Large Core Protocol

Advanced MX-5403A 1-4 Loop MxPro5 Fire Control Panel With 3 Loop Cards - Large Core Protocol

Advanced MX-5403A 1-4 Loop MxPro5 Fire Control Panel With 3 Loop Cards - Large Core ProtocolThe MxPro 5 series control panels are supplied with a single loop driver card 2 on board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. The panel is fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software. An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels.The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored. Simply adding a network card allows the panel to communicate with any other MxPro 5 fire panel remote terminal or network periferal such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable Zonal 25 System LEDs.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing fullEN54 compliance without additional hardware.Dedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and On-board Scope facility.Graphical display configurable for virtually any language.Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination.Integral P-Bus for system expansion via available option cards.Ad-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13Please note The image is for illustrative purposes only.

GBP 2287.19
1

Advanced MxPro5 MX-5101VR 1 Loop 19quot Rack Mount FACP Argus Vega Protocol

Advanced MxPro5 MX-5101VR 1 Loop 19quot Rack Mount FACP Argus Vega Protocol

Advanced MxPro5 MX-5101VR 1 Loop 19 Rack Mount FACP Argus Vega ProtocolThe MxPro5 series control panels are supplied with a single loop driver card 2 on board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. The panel is fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software. An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels.The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored. Simply adding a network card allows the panel to communicate with any other MxPro 5 fire panel remote terminal or network periferal such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable zonal 25 System LEDs.Apollo Argus Vega Hochiki Nittan Evolution protocol support.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing fullEN54 compliance without additional hardware.Dedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and On-board Scope facility.Graphical display configurable for virtually any language.Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination.Integral P-Bus for system expansion via available option cards.Ad-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1072.80
1

Advanced MX-5404D 1-4 Loop Fire Panel With 4 Loop Card - Deep Enclosure - Apollo Hochiki Protocol

Advanced MX-5404D 1-4 Loop Fire Panel With 4 Loop Card - Deep Enclosure - Apollo Hochiki Protocol

Advanced MX-5404D 1-4 Loop Fire Panel With 4 Loop Card - Deep Enclosure - Apollo Hochiki ProtocolThe MxPro 5 series is fully expandable from 1 to 4 loops and supplied with 4 on-board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 System LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select and click programming aid for engineer configuration and end-user operation.Powerful cause-and-effect programming and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable onsite via the on-board alphanumeric keypad or PC-NeT configuration software.PC Software An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels. The suite incorporates a number of different programmes to include a configuration service logo and virtual panel tool to allow the flexibility of the equipment to be fully explored.NetworkSimply adding a network card allows the panel to communicate with any other MxPro 5MxPro 4 fire panel remote terminal or network peripheral such as ipGateway or BMSgraphical interface. The network operates as a true peer-to-peer system and can be configured in a fault-tolerant loop or radial format.Key Features20 programmable Zonal 25 System LEDs.Apollo Argus Vega Hochiki Nittan Evolution protocol support.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware.Dedicated USB RS232 serial port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and On-board Scope facility for ease of commissioning and fault finding.The graphical display can be configured to operate with virtually any language or character set and allow the installers logo to be applied using the Logo application software.Integral P-Bus for system expansion via available option cards.Ad-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 2536.19
1