mcb.dk | Få success online

Advanced MXP-528 MxPro 5 Modem Card 24V

Advanced MXP-528 MxPro 5 Modem Card 24VThe MXP-528 is a Modem Card 24V which has been designed for use with the MxPro 5 system.

GBP 416.38

1

Advanced MxPro 5 MXP-528F Modem Card - 24V Fitted

Advanced MxPro 5 MXP-528F Modem Card - 24V FittedThe MXP-528F is a Modem Card 24V which has been designed for use with the MxPro 5 system.

GBP 416.38

1

Advanced LL-PG-01 Lifeline Vibrating Pager Unit with Out of Range enabled

Advanced LL-PG-01 Lifeline Vibrating Pager Unit with Out of Range enabledModern fire systems can be spread over huge areas covering densely populated buildings and valuable assets such as server rooms with expensive extinguishant release systems in place. By reacting quickly fire system managers and operators can save time and money reduce false alarms and cancel or facilitate evacuation.Once connected to a fire system via the standard ESPA protocol LifeLine will instantly transmit detailed information on the total system and individual panel and device conditions to personal pagers. Information can be issued on a range of triggers including alarms pre-alarms or device faults. LifeLine uses its own radio network which can be reliably configured for coverage and does not rely on third party networks such as SMS text or email.Key FeaturesStandard two-line alphanumeric pagerHand held battery operatedProgrammed to work with LifeLine to BS requirementsOut of range alert featureIn alarm condition messages sent every 10s until mainpanel alarm is resetCannot be accidentallyswitched offTone vibrate

GBP 285.53

1

Advanced LL-PG-02 Lifeline Engineering Pager

Advanced LL-PG-02 Lifeline Engineering PagerModern fire systems canbe spread over huge areas covering densely populated buildings and valuable assets such as server rooms with expensive extinguishant release systems in place. By reacting quickly fire system managers and operators can save time and money reduce false alarms and cancel or facilitate evacuation.Once connected to a fire system via the standard ESPA protocol LifeLine will instantly transmit detailed information on the total system and individual panel and device conditions to personal pagers. Information can be issued on a range of triggers including alarms pre-alarms or device faults. LifeLine uses its own radio network which can be reliably configured for coverage and does not rely on third party networks such as SMS textor email.Key FeaturesStandard two-line alphanumeric pagerHand held battery operatedProgrammed to work with LifeLine to BS requirementsOut of range alert featureIn alarm condition messages sent every 10s until mainpanel alarm is resetCannot be accidentallyswitched offTone vibrate

GBP 285.53

1

Advanced LL-PG Lifeline Vibrating Pager Unit

Advanced LL-PG Lifeline Vibrating Pager UnitModern fire systems can be spread over huge areas covering densely populated buildings and valuable assets such as server rooms with expensive extinguishant release systems in place. By reacting quickly fire system managers and operators can save time and money reduce false alarms and cancel or facilitate evacuation.Once connected to a fire system via the standard ESPA protocol LifeLine will instantly transmit detailed information on the total system and individual panel and device conditions to personal pagers. Information can be issued on a range of triggers including alarms pre-alarms or device faults. LifeLine uses its own radio network which can be reliably configured for coverage and does not rely on third party networks such as SMS text or email.Key FeaturesStandard two-line alphanumeric pagerHand held battery operatedProgrammed to work with LifeLine to BS requirementsOut of range alert featureIn alarm condition messages sent every 10s until mainpanel alarm is resetCannot be accidentallyswitched offTone vibrate

GBP 285.53

1

Advanced MxPro5 23-PSU250 Power Supply for Commander 12Vdc 2.5A

Advanced MxPro5 23-PSU250 Power Supply for Commander 12Vdc 2.5AA 12V Regulated Power Supply Unit for the Advanced MxPro5 Commander 12VDC 2.5A.The Advanced Commander is a powerful IP based solution for customers requiring protocol translation between their Advanced Fire Control Equipment and a Building Management System BMS.

GBP 321.24

1

Advanced Remote Status Indicator LCD LED Indicators with Release Button Mode Select Key Switch EX-3031

Advanced Remote Status Indicator LCD LED Indicators with Release Button Mode Select Key Switch EX-3031The Ex Remote Status Indicators are available in two formats a basic display only with optional key switches or a manual release version with optional keyswitch for automaticmanual mode. The Ex-extinguishing system detects a fire in the same manner as a fire alarm system but in addition to sounding alarms it also controls the release of an extinguishing agent.The extinguishing agent can take many forms from CO through to specialist gasses developed solely for extinguishing purposes. The agent is released into the atmosphere in the area where a fire has been detected reducing the density of oxygen in the atmosphere around the fire thus extinguishing the fire. The Ex-extinguishing system is used primarily in areas of significant valuestrategic importance to businesses e.g. computer suites telecom switch-rooms thus providing a cost effective solution to protect your work place.Key FeaturesSmall and compactRS485 network portOptional manual release or display onlySurface mount or semi-flush optionUp to 7 remote status indicators per one ExGo 1 loop panel3 year warranty as standardKey switch option for mode select or enable controlsMultiple languagesProgrammable inputs outputs

GBP 264.70

1

Advanced Remote Status Indicator Panel with LCD and LED Indicators EX-3020

Advanced Remote Status Indicator Panel with LCD and LED Indicators EX-3020The Remote Status Indicators are available in two formats a basic display only with optional key switches or a manual release version with optional key-switch for automaticmanual mode. The Ex-Extinguishing system detects a fire in the same manner as a fire alarm system but in addition to sounding alarms it also controls the release of an extinguishing agent. The extinguishing agent can take many forms from CO through to specialist gasses developed solely for extinguishing purposes.The agent is released into the atmosphere in the area where a fire has been detected reducing the density of oxygen in the atmosphere around the fire thus extinguishing the fire. The Ex-Extinguishing system is used primarily in areas of significant valuestrategic importance to businesses e.g. computer suites telecom switch-rooms thus providing a cost effective solution to protect your work place.Key FeaturesRS485 Network PortSmall and CompactOptional Manual Release or Display OnlySurface Mount or Semi Flush OptionUp to 7 Remote Status Indicators per one Ex-3001 Panel3 Year Warranty as standardKey Switch Option for mode select or enable controlsMultiple LanguagesSlide In Labels

GBP 205.06

1

Advanced Remote Status Indicator LCD LED Indicators with Mode Select Key Switch EX-3021

Advanced Remote Status Indicator LCD LED Indicators with Mode Select Key Switch EX-3021The Ex Remote Status Indicators are available in two formats a basic display only with optional key switches or a manual release version with optional keyswitch for automaticmanual mode. The Ex-extinguishing system detects a fire in the same manner as a fire alarm system but in addition to sounding alarms it also controls the release of an extinguishing agent.The extinguishing agent can take many forms from CO through to specialist gasses developed solely for extinguishing purposes. The agent is released into the atmosphere in the area where a fire has been detected reducing the density of oxygen in the atmosphere around the fire thus extinguishing the fire. The Ex-extinguishing system is used primarily in areas of significant valuestrategic importance to businesses e.g. computer suites telecom switch-rooms thus providing a cost effective solution to protect your work place.Key FeaturesSmall and compactRS485 network portOptional manual release or display onlySurface mount or semi-flush optionUp to 7 remote status indicators per one ExGo 1 loop panel3 year warranty as standardKey switch option for mode select or enable controlsMultiple languagesProgrammable inputs outputs

GBP 229.76

1

Advanced Ex-3030 Remote Status Indicator Panel with LCD LED and Manual Release Button

Advanced Ex-3030 Remote Status Indicator Panel with LCD LED and Manual Release ButtonThe Remote Status Indicators are available in two formats a basic display only with optional key switches or a manual release version with optional key-switch for automaticmanual mode. The Ex-Extinguishing system detects a fire in the same manner as a fire alarm system but in addition to sounding alarms it also controls the release of an extinguishing agent. The extinguishing agent can take many forms from CO through to specialist gasses developed solely for extinguishing purposes.The agent is released into the atmosphere in the area where a fire has been detected reducing the density of oxygen in the atmosphere around the fire thus extinguishing the fire. The Ex-Extinguishing system is used primarily in areas of significant valuestrategic importance to businesses e.g. computer suites telecom switch-rooms thus providing a cost effective solution to protect your work place.FeaturesRS485 Network PortSmall and CompactOptional Manual Release or Display OnlySurface Mount or Semi Flush OptionUp to 7 Remote Status Indicators per one Ex-3001 Panel3 Year Warranty as standardKey Switch Option for mode select or enable controlsMultiple LanguagesSlide In Labels

GBP 242.87

1

Advanced MxPro 4 MXS-051 Spare 24v 5A EN54-4 PSU amp Battery Charger Card

Advanced MxPro 4 MXS-051 Spare 24v 5A EN54-4 PSU Battery Charger CardThe 1.5A 3.0A and 5.0A power supply units can be used for any fire alarm system which specifies EN54-4 power supply equipment. Suited for almost any application the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.Applications LimitationsFor any fire alarm system which specifies EN54-4 power supplies e.g. BS5839 code of practice.Key FeaturesHigh efficiency switched mode power suppliesBoxed or unboxedApproved EN54-4Compact 1.5A 3.0A and 5.0A versionsPower and fault indication3 year warranty

GBP 384.89

1

Advanced MxPro 4 MXS-050 Spare 24v 3A EN54-4 PSU amp Battery Charger Card

Advanced MxPro 4 MXS-050 Spare 24v 3A EN54-4 PSU Battery Charger CardThe 1.5A 3.0A and 5.0A power supply units can be used for any fire alarm system which specifies EN54-4 power supply equipment. Suited for almost any application the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.Applications LimitationsFor any fire alarm system which specifies EN54-4 power supplies e.g. BS5839 code of practice.Key FeaturesHigh efficiency switched mode power suppliesBoxed or unboxedApproved EN54-4Compact 1.5A 3.0A and 5.0A versionsPower and fault indication3 year warranty

GBP 223.64

1

Advanced MxPro5 MXP-503F Network Card - Standard Fitted

Advanced MxPro5 MXP-503F Network Card - Standard FittedThe Ad-NeT network system allows all MxPro 5 series control panels remote terminals and network peripherals to be connected together using standard fire resistant two-core cable. It provides both the benefits of distributed intelligence and reduced installation costs whilst catering for the smallest two-panel network through to the largest 200 panel wide area networked system.The network operates as a true peer-to peer system allowing information from any input or output device to be passed over the network and displayed on any MxPro 5 control panel or remote terminal as required.Simply adding and connecting a network card allows any MxPro 5 control panel or remote terminal to be networked. All other nodes on the Ad-NeT system will be instantly aware of a panel as soon as it is given a valid network node address allowing additional panels to be added at any time. All panels incorporate a network analyser providing valuable diagnostic and status information and also have the facility to prevent the transmission of fires or faults during commissioning.For more complex systems the Windows based PC-NeT Mx configuration software allows sector based programming for Mute Silence Resound and Reset control keys as well as investigation delays group disablement and test instructions. All panels within the same sector will share common controls and each panel or remote terminal can also be programmed to show specific network information on a zonal basis. For cause and effect any input device can be programmed to operate any output device on any panel.Key FeaturesLarge Ad-NeT 200 Panel NetworkUp to 1.5Km between Control PanelsWindows based PC setupNetwork Systems share up to 1000 zonesNetwork Analysis from Control Panel

GBP 234.06

1

Advanced MxPro 45 EN54 5A Power Supply Unit amp Battery Charger MXP-551

Advanced MxPro 45 EN54 5A Power Supply Unit Battery ChargerMXP-551The Advanced 1.5A 3.0A and 5.0A power supply units can be used for any fire alarm system which specifies EN54-4 power supply equipment. Suited for almost any application the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.PSE and charger or PSE only options on the 3.0A and 5.0A versions. A Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages current measurements to compatible control panel modules.ApplicationsFor any fire alarm system which specifies EN54-4 power supplies e.g. BS5839 code of practice. These power supply units can be used in any fire alarm installation requiring a 24Volt supply for operation.Key FeaturesA range of power supply equipment with power output options to suit most applications.Universal AC input on the 3.0A and 5.0A versionsHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versions

GBP 330.84

1

Advanced MxPro 45 MXP-551D EN54 5A Power Supply Unit amp Battery Charger with Deep Enclosure

Advanced MxPro 45MXP-551DEN54 5A Power Supply Unit Battery Charger with Deep EnclosureThe Advanced 1.5A 3.0A and 5.0A power supply units can be used for any fire alarm system which specifies EN54-4 power supply equipment. Suited for almost any application the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities. PSE and charger or PSE only options on the 3.0A and 5.0A versions.A Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages current measurements to compatible control panel modules.ApplicationsFor any fire alarm system which specifies EN54-4 power supplies e.g. BS5839 code of practice. These power supply units can be used in any fire alarm installation requiring a 24Volt supply for operation.Key FeaturesA range of power supply equipment with power output options to suit most applications.Universal AC input on the 3.0A and 5.0A versionsHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versions

GBP 357.69

1

Advanced MxPro 45 EN54 3A Power Supply Unit amp Battery Charger MXP-550

Advanced MxPro45 EN54 3A Power Supply Unit Battery ChargerMXP-550The Advanced 1.5A 3.0A and 5.0A power supply units can be used for any fire alarm system which specifies EN54-4 power supply equipment. Suited for almost any application the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.PSE and charger or PSE only options on the 3.0A and 5.0A versions. A Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages current measurements to compatible control panel modules.ApplicationsFor any fire alarm system which specifies EN54-4 power supplies e.g. BS5839 code of practice. These power supply units can be used in any fire alarm installation requiring a 24Volt supply for operation.Key FeaturesA range of power supply equipment with power output options to suit most applications.Universal AC input on the 3.0A and 5.0A versionsHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versions

GBP 211.20

1

Advanced MxPro 45 MXP-549 EN54 1.5A Power Supply Unit amp Battery Charger

Advanced MxPro 45 MXP-549 EN54 1.5A Power Supply Unit Battery ChargerThe Advanced 1.5A 3.0A and 5.0A power supply units can be used for any fire alarm system which specifies EN54-4 power supply equipment. Suited for almost any application the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.PSE and charger or PSE only options on the 3.0A and 5.0A versions. A Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages current measurements to compatible control panel modules.ApplicationsFor any fire alarm system which specifies EN54-4 power supplies e.g. BS5839 code of practice. These power supply units can be used in any fire alarm installation requiring a 24Volt supply for operation.Key FeaturesA range of power supply equipment with power output options to suit most applications.Universal AC input on the 3.0A and 5.0A versionsHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versions

GBP 191.96

1

Advanced MxPro 45 MXP-550D EN54 3A Power Supply Unit amp Battery Charger with Deep Enclosure

Advanced MxPro 45 MXP-550D EN54 3A Power Supply Unit Battery Charger with Deep EnclosureThe Advanced 1.5A 3.0A and 5.0A power supply units can be used for any fire alarm system which specifies EN54-4 power supply equipment. Suited for almost any application the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.PSE and charger or PSE only options on the 3.0A and 5.0A versions. A Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages current measurements to compatible control panel modules.ApplicationsFor any fire alarm system which specifies EN54-4 power supplies e.g. BS5839 code of practice. These power supply units can be used in any fire alarm installation requiring a 24Volt supply for operation.Key FeaturesA range of power supply equipment with power output options to suit most applications.Universal AC input on the 3.0A and 5.0A versionsHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versions

GBP 251.47

1

Advanced Lux Intelligent TLEDNM3P Twin-LED 3-Hour Non-Maintained Emergency Addressable Projector Luminaire

Advanced Lux Intelligent TLEDNM3P Twin-LED 3-Hour Non-Maintained Emergency Addressable Projector LuminaireThe Twin-LED projector luminaire provides a simple and efficient means of creating a high level of emergency illumination across a given area.The luminaire utilises a unique lens system offering a high degree of optical control resulting in high intensity beam patterns across a working plane.OperationThe standard luminaire mode of operation is as a Non-maintained emergency unit. In the event of a power failure the units will switch to emergency operation immediately making them ideal for high risk areas. They will operate the projectors for three hours or the return of power.The two 3-Watt LED projector heads are powered by integral Nickel Cadmium NiCd rechargeable batteries that fully comply with the requirements of BSEN 60598-2-22.The emergency function fully supports all the features of the Lux Intelligent test system.InstallationThe projector heads can be remotely mounted away from the control box. The construction of the control box also allows for the mounting of the unit with the projectors on the underside. The luminaire has 20mm knock-outs in one end at the back for ease of cable entry.Key FeaturesIdeal for high risk processesEnergy efficient LED solutionComplies with BS EN 60598-2-22Full photometry availableWall mounted at 2.5M can be spaced at 25 Metres achieving 1 Lux centre lineFully compatible with Lux Intelligent test system

GBP 401.98

1

Advanced MXP-503 Standard Network Card MxPro5

Advanced MXP-503 Standard Network Card MxPro5The Ad-NeT network system allows all MxPro5 series control panels remote terminals and network peripherals to be connected together using standard fire resistant two-core cable. It provides both the benefits of distributed intelligence and reduced installation costs whilst catering for the smallest two-panel network through to the largest 200 panel wide area networked system.The network operates as a true peer-to peer system allowing information from any input or output device to be passed over the network and displayed on any MxPro5 control panel or remote terminal as required.Simply adding and connecting a network card allows any MxPro5 control panel or remote terminal to be networked. All other nodes on the Ad-NeT system will be instantly aware of a panel as soon as it is given a valid network node address allowing additional panels to be added at any time. All panels incorporate a network analyser providing valuable diagnostic and status information and also have the facility to prevent the transmission of fires or faults during commissioning.For more complex systems the Windows based PC-NeT Mx configuration software allows sector-based programming for Mute Silence Resound and Reset control keys as well as investigation delays group disablement and test instructions. All panels within the same sector will share common controls and each panel or remote terminal can also be programmed to show specific network information on a zonal basis. For cause and effect any input device can be programmed to operate any output device on any panel.Key FeaturesLarge Ad-NeT 200 Panel NetworkUp to 1.5Km between Control PanelsWindows based PC setupNetwork Systems share up to 1000 zonesNetwork Analysis from Control PanelStandard NetworkThe maximum total cable length is 1.5km. The maximum number of network nodes is 32 50 with signal bufferFault Tolerant NetworkThe maximum cable length is 1.5km between each node and the maximum total loop length is 20km. Each network card has in-built diagnostics and is fully monitored for both short and open circuit faults between nodes. The network is capable of withstanding a single fault between nodes without loss of communications to any single panel. The maximum number of network nodes is 200.

GBP 234.06

1

Advanced Lux Intelligent PLED230 Mains Only PANEL-LED Recessed LED Luminaire

Advanced Lux Intelligent PLED230 Mains Only PANEL-LED Recessed LED LuminaireThe Panel-LED is the latest in LED reliability and low energy lighting applications. The Panel-LED is only 12mm thick and drops in to a standard 600mm square tile opening in exposed -T ceilings. They provide an aesthetically pleasing high output uniform light source with a colour temperature of 4500K White. The front face of the Panel LED operates with an even luminance distribution and provides glare free illumination on the working plane.The Panel-LED luminaires are driven by 230Volt 50 Hertz small electronic drivers which are power factor corrected. They can be supplied as standard mains only luminaires and are also available as full emergency units. Dimming controls are also an option. The emergency option fully supports all the features of the Lux Intelligent test system and complies fully with all applicable requirements of EN60598.2.22.OperationThe Panel-LED is supplied with all the standard emergency equipment housed within a galvanised remote metal housing. In the event of a power failure the luminaire continues to operate for a further 3 hours from the Nickel-Metal Hydride batteries. Maintained versions can be used for standard mains lighting and will automatically provide emergency lighting in the event of a loss of normal mains supply.InstallationThe Panel-LED drops in to a standard 600mm square tile opening in exposed T ceilings. The luminaire is also available with dimming control options.Key FeaturesLow energy high light outputLong life LEDs 50000 hoursSimple installation in to suspended ceilingsFully complies with all aspects of EN60598.2.22Fully compatible with Lux Intelligent test system

GBP 425.22

1

Advanced RLEDNM3PHO Mor-LED IP65 High Output Bulkhead Surface Mount Non-Maintained Addressable

Advanced RLEDNM3PHO Mor-LED IP65 High Output Bulkhead Surface Mount Non-Maintained AddressableThe Mor-LED High Output bulkhead is a robust IP65-rated polycarbonate base and polycarbonate fresnel lens. Mor-LED High Output luminaires provide 800 lumen output as standard with the fresnel lens creating cost effective opportunities to minimise the number of luminaires required within an installation.Mor-LED luminaires can be surface mounted or semi-recessed and are ideal for exterior and industrial applications where higher illuminance levels are required.The luminaire provides 800 lumens and the lens generates a wide intensity distribution ideal for providing good luminance on an escape route. The Mor-LED fully supports all features of the LuxIntelligent test system and complies fully with all the relevant requirements of EN60598.2.22.OperationThe Mor-LED is supplied with integral maintained emergency lighting control gear. The non-maintained operation is achieved by excluding the switched live supply. The self-contained variants offer 3-hour emergency lighting duration from integral nickel cadmium batteries. The luminaires can be used for standard switched mains lighting but will automatically provide emergency lighting in the event of a loss of local mains supply. They are ideal for low-maintenance applications offering 4 to 5 years of maintenance-free operation and provide an excellent solution to anywhere with a high lux requirement such as 50 lux in an emergency in a treatment room.Key Features Fully compatible with LuxIntelligent test system High output 800 Lumens Long-life LEDs 50000 hours IP65-rated bulkhead Low power consumption Suitable for use in cold stores down to -20C Fully complies with all aspects of EN60598.2.22 Lens can be fitted with 100mm high self-adhesive signs Suitable for 50 lux minimum requirements like treatment rooms

GBP 320.03

1

Advanced MXP-051 5A EN54-4 PSU amp Charger Utility Enc. - 17Ah Battery Capacity

Advanced MXP-051 5A EN54-4 PSU Charger Utility Enc. - 17Ah Battery CapacityThe Advanced 1.5A 3.0A and 5.0A Power Supply Units can be used for any fire alarm system installation that specifies EN54-4 Power Supply Equipment.Suited for almost any application except for CIE in separate cabinet the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.Key FeaturesA range of power supply equipment with power output options to suit most applicationsAll models monitor the battery internal series resistanceWide AC Input range on the 3.0A and 5.0A versionsPSE and Charger or PSE only options on the 3.0A and 5.0A versionsA Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages to compatible control panel modulesA Remote battery sensing option is provided on the 3.0A and 5.0A versions

GBP 349.56

1

Advanced MXP-050-001 3A EN54-4 PSU amp Charger Utility Enc. - 7Ah Battery Capacity

Advanced MXP-050-001 3A EN54-4 PSU Charger Utility Enc. - 7Ah Battery CapacityThe Advanced 1.5A 3.0A and 5.0A Power Supply Units can be used for any fire alarm system installation that specifies EN54-4 Power Supply Equipment.Suited for almost any application except for CIE in separate cabinet the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.Key FeaturesA range of power supply equipment with power output options to suit most applicationsAll models monitor the battery internal series resistanceWide AC Input range on the 3.0A and 5.0A versionsPSE and Charger or PSE only options on the 3.0A and 5.0A versionsA Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages to compatible control panel modulesA Remote battery sensing option is provided on the 3.0A and 5.0A versions

GBP 231.37

1

Advanced MXP-050-002 3A EN54-4 PSU amp Charger Utility Enc. - 17Ah Battery Capacity

Advanced MXP-050-002 3A EN54-4 PSU Charger Utility Enc. - 17Ah Battery CapacityThe Advanced 1.5A 3.0A and 5.0A Power Supply Units can be used for any fire alarm system installation that specifies EN54-4 Power Supply Equipment.Suited for almost any application except for CIE in separate cabinet the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.Key FeaturesA range of power supply equipment with power output options to suit most applicationsAll models monitor the battery internal series resistanceWide AC Input range on the 3.0A and 5.0A versionsPSE and Charger or PSE only options on the 3.0A and 5.0A versionsA Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages to compatible control panel modulesA Remote battery sensing option is provided on the 3.0A and 5.0A versions

GBP 284.19

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)

Advanced MXP-528 MxPro 5 Modem Card 24V

Advanced MxPro 5 MXP-528F Modem Card - 24V Fitted

Advanced LL-PG-01 Lifeline Vibrating Pager Unit with Out of Range enabled

Advanced LL-PG-02 Lifeline Engineering Pager

Advanced LL-PG Lifeline Vibrating Pager Unit

Advanced MxPro5 23-PSU250 Power Supply for Commander 12Vdc 2.5A

Advanced Remote Status Indicator LCD LED Indicators with Release Button Mode Select Key Switch EX-3031

Advanced Remote Status Indicator Panel with LCD and LED Indicators EX-3020

Advanced Remote Status Indicator LCD LED Indicators with Mode Select Key Switch EX-3021

Advanced Ex-3030 Remote Status Indicator Panel with LCD LED and Manual Release Button

Advanced MxPro 4 MXS-051 Spare 24v 5A EN54-4 PSU amp Battery Charger Card

Advanced MxPro 4 MXS-050 Spare 24v 3A EN54-4 PSU amp Battery Charger Card

Advanced MxPro5 MXP-503F Network Card - Standard Fitted

Advanced MxPro 45 EN54 5A Power Supply Unit amp Battery Charger MXP-551

Advanced MxPro 45 MXP-551D EN54 5A Power Supply Unit amp Battery Charger with Deep Enclosure

Advanced MxPro 45 EN54 3A Power Supply Unit amp Battery Charger MXP-550

Advanced MxPro 45 MXP-549 EN54 1.5A Power Supply Unit amp Battery Charger

Advanced MxPro 45 MXP-550D EN54 3A Power Supply Unit amp Battery Charger with Deep Enclosure

Advanced Lux Intelligent TLEDNM3P Twin-LED 3-Hour Non-Maintained Emergency Addressable Projector Luminaire

Advanced MXP-503 Standard Network Card MxPro5

Advanced Lux Intelligent PLED230 Mains Only PANEL-LED Recessed LED Luminaire

Advanced RLEDNM3PHO Mor-LED IP65 High Output Bulkhead Surface Mount Non-Maintained Addressable

Advanced MXP-051 5A EN54-4 PSU amp Charger Utility Enc. - 17Ah Battery Capacity

Advanced MXP-050-001 3A EN54-4 PSU amp Charger Utility Enc. - 7Ah Battery Capacity

Advanced MXP-050-002 3A EN54-4 PSU amp Charger Utility Enc. - 17Ah Battery Capacity

Powered by Cobiro