37 results (0,13197 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Advanced Lux Intelligent Pulse Light Unit with 250mm Cable LXP-302

Advanced Lux Intelligent Pulse Light Unit with 250mm Cable LXP-302

Advanced Lux Intelligent Pulse Light Unit with 250mm Cable LXP-302The Pulse light units are a range of addressable modules designed for use with the Lux Intelligent emergency lighting test panel. The modules provide the ability to make a standard emergency luminaire into an addressable luminaire that can be automatically tested and monitored by the Lux Intelligent panel twenty-four hours a day and three hundred and sixty-five days a year. All the modules are loop powered which means even if the local power fails where the luminaires or devices are installed the panel will still be able to monitor their condition. They do not use any power from any batteries installed with the luminaires.The Lxp-302 modules provide control and monitoring of the luminaire AC mains power battery condition and lamp status giving actual battery voltage and light level measurements at the control panel. The Lxp-304 module purely monitors the lamp status reporting an actual light level. This device is specifically designed for central battery and static inverter installations. Both the Lxp-302 and Lxp-304 modules can be configured to monitor a luminaire operating as either a maintained or non-maintained luminaire.Key FeaturesAllows standard emergency luminaire to be used as an addressable luminaireAllows the monitoring of critical parametersEnables the automatic testing of emergency luminairesFully supports all the features of the Lux Intelligent panels

GBP 107.72
1

Advanced Lux Intelligent Pulse Light Unit with 1000mm Cable LXP-302L

Advanced Lux Intelligent Pulse Light Unit with 1000mm Cable LXP-302L

Advanced Lux Intelligent Pulse Light Unit with 1000mm Cable LXP-302LThe Pulse light units are a range of addressable modules designed for use with the Lux Intelligent emergency lighting test panel. The modules provide the ability to make a standard emergency luminaire into an addressable luminaire that can be automatically tested and monitored by the Lux Intelligent panel twenty-four hours a day and three hundred and sixty-five days a year. All the modules are loop powered which means even if the local power fails where the luminaires or devices are installed the panel will still be able to monitor their condition. They do not use any power from any batteries installed with the luminaires.The Lxp-302 modules provide control and monitoring of the luminaire AC mains power battery condition and lamp status giving actual battery voltage and light level measurements at the control panel. The Lxp-304 module purely monitors the lamp status reporting an actual light level. This device is specifically designed for central battery and static inverter installations. Both the Lxp-302 and Lxp-304 modules can be configured to monitor a luminaire operating as either a maintained or non-maintained luminaire.Key FeaturesAllows standard emergency luminaire to be used as an addressable luminaireAllows the monitoring of critical parametersEnables the automatic testing of emergency luminairesFully supports all the features of the Lux Intelligent panels

GBP 111.12
1

Advanced ExGo EXP-003-003 Hold Switch Brass Trim Cover Plate

Advanced ExGo EXP-003-003 Hold Switch Brass Trim Cover Plate

Advanced ExGo EXP-003-003 Hold Switch Brass Trim Cover PlateThe Hold and Abort Switch Modules compliment the ExGo extinguishing and suppression control panels.The modules comply with the requirementsof BS7273-1.The switches are easy to wire and multiple units can easily be daisy-chained together on an input circuit.A range of finishes are available - white stainless steel and brass trims.Alternatively the unit can be supplied in an IP65 rated enclosure.The standard units can be surface mounted or semi-flush mounted onto standard 3 electrical boxes. The IP65 unit is surface mounted.All units are provided with an end of line resistor Reol.Compatible with the ExGo gas extinguishing panel and remote status indicator panel input circuits.Key FeaturesRange of finishes availableSurface or flush mountIP65 optionComplies with BS7273-1 requirementsStandard units available in white plastic finish

GBP 105.14
1

Advanced ExGo EXP-004-065 Abort Switch - IP65 Plastic Enclosure

Advanced ExGo EXP-004-065 Abort Switch - IP65 Plastic Enclosure

Advanced ExGo EXP-004-065 Abort Switch IP65 Plastic EnclosureThe Hold and Abort Switch Modules complement the ExGo extinguishing and suppression control panels.The modules comply with the requirementsof BS7273-1.The switches are easy to wire and multiple units can easily be daisy-chained together on an input circuit.A range of finishes are available - white stainless steel and brass trims.Alternatively the unit can be supplied in an IP65 rated enclosure.The standard units can be surface mounted or semi-flush mounted onto standard 3 electrical boxes. The IP65 unit is surface mounted.All units are provided with an end of line resistor Reol.Compatible with the ExGo gas extinguishing panel and remote status indicator panel input circuits.Key FeaturesRange of finishes availableSurface or flush mountIP65 optionComplies with BS7273-1 requirementsStandard units available in white plastic finish

GBP 109.73
1

Advanced ESLB Spare EasySafe Low Voltage Downlighter First Fix Base Pack of 5

Advanced ESLB Spare EasySafe Low Voltage Downlighter First Fix Base Pack of 5

Advanced ESLB Spare EasySafe Low Voltage Downlighter First Fix Base Pack of 5The ESLB is a pack of spare bases for the EasySafe Low Voltage Downlighters.EasySafe products are designed to work with LuxIntelligent Advanceds emergency light testing system. Powered directly from the LuxIntelligent panel Advanceds EasySafe devices require no local power supply and are compatible with any existing LuxIntelligent luminaires and exit signs enabling the easy installation of devices onto existing wiring to form one intelligent emergency lighting system.The low-voltage lights offer quick and easy fitting and service with a simple twist and click installation onto a first-fix base. EasySafe has been designed to offer true scalability with just one LuxIntelligent panel supporting up to 400 EasySafe devices alongside an additional 1592 locally-powered devices.Key FeaturesPack of 5

GBP 97.01
1

Advanced ExGo EXP-003-002 Hold Switch Stainless Steel Trim Cover Plate

Advanced ExGo EXP-003-002 Hold Switch Stainless Steel Trim Cover Plate

Advanced ExGo EXP-003-002 Hold Switch Stainless Steel Trim Cover PlateThe Hold and Abort Switch Modules compliment the ExGo extinguishing and suppression control panels.The modules comply with the requirementsof BS7273-1.The switches are easy to wire and multiple units can easily be daisy-chained together on an input circuit.A range of finishes are available - white stainless steel and brass trims.Alternatively the unit can be supplied in an IP65 rated enclosure.The standard units can be surface mounted or semi-flush mounted onto standard 3 electrical boxes. The IP65 unit is surface mounted.All units are provided with an end of line resistor Reol.Compatible with the ExGo gas extinguishing panel and remote status indicator panel input circuits.Key FeaturesRange of finishes availableSurface or flush mountIP65 optionComplies with BS7273-1 requirementsStandard units available in white plastic finish

GBP 105.14
1

Advanced ExGo EXP-003-065 Hold Switch IP65 Plastic Enclosure

Advanced ExGo EXP-003-065 Hold Switch IP65 Plastic Enclosure

Advanced ExGo EXP-003-065 Hold Switch IP65 Plastic EnclosureThe Hold and Abort Switch Modules compliment the ExGo extinguishing and suppression control panels.The modules comply with the requirementsof BS7273-1.The switches are easy to wire and multiple units can easily be daisy-chained together on an input circuit.A range of finishes are available - white stainless steel and brass trims.Alternatively the unit can be supplied in an IP65 rated enclosure.The standard units can be surface mounted or semi-flush mounted onto standard 3 electrical boxes. The IP65 unit is surface mounted.All units are provided with an end of line resistor Reol.Compatible with the ExGo gas extinguishing panel and remote status indicator panel input circuits.Key FeaturesRange of finishes availableSurface or flush mountIP65 optionComplies with BS7273-1 requirementsStandard units available in white plastic finish

GBP 109.73
1

Advanced ESLBP Spare EasySafe Low Voltage Downlighter Battery Pack Pack of 5

Advanced ESLBP Spare EasySafe Low Voltage Downlighter Battery Pack Pack of 5

Advanced ESLBP Spare EasySafe Low Voltage Downlighter Battery Pack Pack of 5The ESLBP is a pack of spare batteries for the EasySafe Low Voltage Downlighters.EasySafe products are designed to work with LuxIntelligent Advanceds emergency light testing system. Powered directly from the LuxIntelligent panel Advanceds EasySafe devices require no local power supply and are compatible with any existing LuxIntelligent luminaires and exit signs enabling the easy installation of devices onto existing wiring to form one intelligent emergency lighting system.The low-voltage lights offer quick and easy fitting and service with a simple twist and click installation onto a first-fix base. EasySafe has been designed to offer true scalability with just one LuxIntelligent panel supporting up to 400 EasySafe devices alongside an additional 1592 locally-powered devices.Key FeaturesPack of 5

GBP 148.16
1

Advanced ExGo EXP-004-002 Abort Switch Stainless Steel Trim Cover Plate

Advanced ExGo EXP-004-002 Abort Switch Stainless Steel Trim Cover Plate

Advanced ExGo EXP-004-002 Abort Switch Stainless Steel Trim Cover PlateThe Hold and Abort Switch Modules compliment the ExGo extinguishing and suppression control panels.The modules comply with the requirementsof BS7273-1.The switches are easy to wire and multiple units can easily be daisy-chained together on an input circuit.A range of finishes are available - white stainless steel and brass trims.Alternatively the unit can be supplied in an IP65 rated enclosure.The standard units can be surface mounted or semi-flush mounted onto standard 3 electrical boxes. The IP65 unit is surface mounted.All units are provided with an end of line resistor Reol.Compatible with the ExGo gas extinguishing panel and remote status indicator panel input circuits.Key FeaturesRange of finishes availableSurface or flush mountIP65 optionComplies with BS7273-1 requirementsStandard units available in white plastic finish

GBP 105.14
1

Advanced MxPro 5 MXP-517F 2-Pos Key Switch Untrapped Fitted

Advanced MxPro 5 MXP-517F 2-Pos Key Switch Untrapped Fitted

Advanced MxPro 5 MXP-517F 2-Pos Key Switch Untrapped FittedThe MxPro 5control panel range supportsdirect installation of up to 8 individual key switches.Key FeaturesEnabledisable controlsGroup isolate to disable IO across networkFor use to startenable a class changeTrapped and un-trapped key switches availableControl of multi-sensordevice sensitivity mode changeSimple to install and configureTrapped and Un-trapped key switches

GBP 98.59
1

Advanced 20-VMC100-ADV Single Relay Powered Output Module With Built In Isolator

Advanced 20-VMC100-ADV Single Relay Powered Output Module With Built In Isolator

Advanced 20-VMC100-ADV Single Relay Powered Output Module With Built In IsolatorThe single output module is loop powered designed around a fully digital protocol and provides control by activating equipment for DDA compliance such as vibrating pillows. The output channel is monitored and will detect open and short circuit conditions.The unit provides a fast and secure response and incorporates a bidirectional short circuit isolator. Connections are made using plug-in terminal blocks which will accept conductors up to 2.5mm.The unit is supplied fixed to a plate which is suitable for wall mounting. Standard 25mm or deep 47mm mounting boxes are available.Key FeaturesShort circuit isolators in each device to the requirements of EN54- 17Auto addressing capability by the control panel or manually using a handheld programmerDigital checking of double addressLine quality informationBicolour red green LED driven by the control panel

GBP 131.62
1

Advanced ExGo Abort Switch Brass Trim Cover Plate EXP-004-003

Advanced ExGo Abort Switch Brass Trim Cover Plate EXP-004-003

Advanced ExGo Abort Switch Brass Trim Cover Plate EXP-004-003The Hold and Abort Switch Modules compliment the ExGo extinguishing and suppression control panels. The modules comply with the requirementsof BS7273-1.The switches are easy to wire and multiple units can easily be daisy-chained together on an input circuit.A range of finishes are available - white stainless steel and brass trims.Alternatively the unit can be supplied in an IP65 rated enclosure. The standard units can be surface mounted or semi-flush mounted onto standard 3 electrical boxes.The IP65 unit is surface mounted. All units are provided with an end of line resistor Roel. Compatible with the ExGo gas extinguishing panel and remote status indicator panel input circuits.Key FeaturesRange of finishes availableSurface or flush mountIP65 optionComplies with BS7273-1 requirementsStandard units available in white plastic finish

GBP 105.14
1

Advanced Dynamix Tools PC-NET-003 MxPro4amp5 Configuration Software amp Lead

Advanced Dynamix Tools PC-NET-003 MxPro4amp5 Configuration Software amp Lead

Advanced Dynamix Tools PC-NET-003 MxPro45 Configuration Software LeadPC-NeT-003 allows the configuration of the MxPro45 series fire panels and is equipped with the latest programming options expected from a modern fire control panel.Key FeaturesAllows full configuration of the MxPro45 panels and networkUser friendly Windows based softwareVirtual panel displaySupports remote diagnosticsAssistants menu to check your design and configurationPanel branding via electronic logoService Tool for predicting false alarms and providing customised end user reports

GBP 126.66
1

Advanced Dynamix PC-NET-015 MxPro 5 Service Tool Software

Advanced Dynamix PC-NET-015 MxPro 5 Service Tool Software

Advanced Dynamix PC-NET-015 MxPro 5 Service Tool SoftwarePC-Net-015 is a windows based PC application allowing the retrieval of analogue values panel meter readings and event logs from the Mx control equipment in order to provide customised reports service and maintenance as well as the end user.End users are presented with site maps buttons text and images to easily monitor navigate and control the fire alarm equipment installed on-site.Simple control buttons permit the user to EnableDisable field devices and can also provide a means for SilenceReset functionality. Analogue values can also be obtained from all field devices via the menu selections.The software also includes an extensive History Log to monitor all activations received and can be easily analysed using the extensive search methods available.The software provides a cost-effective solution for all types of installation and is suitable for use with single panel to multi-site applications.Key FeaturesStandard Windows based PC applicationAd-NeT Network CompatibleWindows providing Graphics Text or Event ListUser friendly ConfigurationEvent and Alarm HistoryZoom GraphicSymbol Control

GBP 102.99
1

Advanced Sounder Splitter Card - MXS-021

Advanced Sounder Splitter Card - MXS-021

Advanced Sounder Splitter Card - MXS-021The Mxs-021 Sounder Circuit Splitter is a peripheral unit for use with all MxPro4 range of control Panels. This additional unit takes a standard sounder circuit from either a control panel or other panel based sounder circuit controller and multiplies to provide up to 4 monitored outputs. In operation the additional outputs follow the output they are connected to. The circuits are fully monitored for open and short circuit and will take an independent supply to provide up to 1A per circuit.Key Features4 Monitored Outputs3 Year Warranty as standardUp to 1 Amp per circuitCost effective against ancillary hardwareCompatibilityThe Sounder Splitter Cardis compatible with all MxPro 4 controlpanels.LimitationsThe 4-way sounder splitter card can be supplied as a PCB only for mounting. When supplied fitted in this format the load at the outputs from the splitter will be limited to the sounder output loading of the input circuit from which it is driven.All 4 outputs on the sounder splitter card will operate in tandem and follow the output of the sounder circuit to which the card is connected.

GBP 163.18
1

Advanced MxPro 5 MXP-519F 2-Pos Key Switch - Mom Trapped Fitted

Advanced MxPro 5 MXP-519F 2-Pos Key Switch - Mom Trapped Fitted

Advanced MxPro 5 MXP-519F 2-Pos Key Switch - Mom Trapped FittedTheMxPro 5control panel range supportsdirect installation of up to 8 individual key switches.ApplicationsThe MxPro 5 1 loop permits 1 key-switch to be fitted but the MxPro 5 2 4 loop control panels allow a maximum of 8.Key FeaturesEnabledisable controlsGroup isolate to disable IO across networkFor use to startenable a class changeTrapped and un-trapped key switches availableControl of multi-sensordevice sensitivity mode changeSimple to install and configureTrapped and Un-trapped key switches

GBP 98.59
1

Advanced MxPro 5 MXP-515F 3-Position Key Switch - Trapped Requires 2 Inputs

Advanced MxPro 5 MXP-515F 3-Position Key Switch - Trapped Requires 2 Inputs

Advanced MxPro 5 MXP-515F 3-Position Key Switch - Trapped Requires 2 InputsThe MxPro 5control panel range supportsdirect installation of up to 8 individual key switches.ApplicationsThe MxPro 5 1 loop permits 1 key-switch to be fitted but the MxPro 5 2 4 loop control panels allow a maximum of 8.Key FeaturesEnabledisable controlsGroup isolate to disable IO across networkFor use to startenable a class changeTrapped and un-trapped key switches availableControl of multi-sensordevice sensitivity mode changeSimple to install and configureTrapped and Un-trapped key switches

GBP 98.59
1

Advanced MxPro5 MXP-515TF 3-Pos Key Switch Key-free in centre position only Fitted

Advanced MxPro5 MXP-515TF 3-Pos Key Switch Key-free in centre position only Fitted

Advanced MxPro5 MXP-515TF 3 -Pos Key Switch Key-free in centre position only FittedThe MxPro5 control panel range supports direct installation of up to 8 individual key switches.ApplicationsThe MxPro5 1 loop permits 1 key-switch to be fitted but the MxPro5 2 4 loop control panels allow a maximum of 8.Key FeaturesEnabledisable controlsGroup isolate to disable IO across networkFor use to startenable a class changeTrapped and un-trapped key switches availableControl of multi-sensordevice sensitivity mode changeSimple to install and configureTrapped and Un-Trapped key switchesCan be used with all MxPro5 series control panels

GBP 98.59
1