mcb.dk | Få success online

AXELENT X-Protect Crash Protection Barrier to Push Out and Push In Length 1770 mm

X-Protect crash protection barrier, to push out and push in, length 1770 mm. Supplied = flat pack. Type of mounting = to push out and push in. Overall length = 1770 mm. Overall width = 100 mm. Overall height = 220 mm. Colour = zinc yellow RAL 1018. Material = polypropylene. Weight = 6.63 kg. Place of use = indoor use. Easy assembly by pushing out and in. Modular and flexible due to different lengths. Sustainable and environmentally friendly - all parts are recyclable. X-Protect is a range of unsurpassed modular crash protection barrier systems with few system components and integrated damping. X-Protect adapts to your workplace and allows quick modification, or repair and replacement, of existing barriers. Use the Low crash protection barrier as impact protection installed close to the ground. It is ideal for keeping lightweight vehicles out or defining storage areas. Thanks to our modular planks and crash protection bollards, damaged or worn parts can be replaced at component level. This is easy to do by pushing them out and in.

GBP 339.99

1

AXELENT X-Protect Crash Protection Barrier to Push Out and Push In Length 1270 mm

X-Protect crash protection barrier, to push out and push in, length 1270 mm. Supplied = flat pack. Type of mounting = to push out and push in. Overall length = 1270 mm. Overall width = 100 mm. Overall height = 220 mm. Colour = zinc yellow RAL 1018. Material = polypropylene. Weight = 6.63 kg. Place of use = indoor use. Easy assembly by pushing out and in. Modular and flexible due to different lengths. Sustainable and environmentally friendly - all parts are recyclable. X-Protect is a range of unsurpassed modular crash protection barrier systems with few system components and integrated damping. X-Protect adapts to your workplace and allows quick modification, or repair and replacement, of existing barriers. Use the Low crash protection barrier as impact protection installed close to the ground. It is ideal for keeping lightweight vehicles out or defining storage areas. Thanks to our modular planks and crash protection bollards, damaged or worn parts can be replaced at component level. This is easy to do by pushing them out and in.

GBP 239.99

1

AXELENT X-Protect Crash Protection Bollard Connection Kit for Bolting In Place Length 2300 mm

X-Protect crash protection bollard connection kit, for bolting in place, length 2300 mm. Supplied = flat pack. Type of mounting = for screw connection. Overall length = 2300 mm. Overall width = 85 mm. Overall height = 50 mm. Colour = graphite black RAL 9011. Material = steel. Weight = 2.92 kg. Place of use = indoor use. Can be combined with the X-Guard system. Modular and flexible. X-Protect is a range of unsurpassed modular crash protection barrier systems with few system components and integrated damping. X-Protect adapts to your workplace and allows quick modification, or repair and replacement, of existing barriers. If you have installed Axelent's X-Guard machinery protection system, it is easy to combine the X-Protect range with it. The connecting bollard is available in three heights to match our most common related wall element products. Starting with the bollard, you can then select any configuration of X-Protect that you like.

GBP 399.99

1

AXELENT X-Protect Crash Protection Bollard Connection Kit for Bolting In Place Length 2000 mm

X-Protect crash protection bollard connection kit, for bolting in place, length 2000 mm. Supplied = flat pack. Type of mounting = for screw connection. Overall length = 2000 mm. Overall width = 85 mm. Overall height = 50 mm. Colour = graphite black RAL 9011. Material = steel. Weight = 2.68 kg. Place of use = indoor use. Can be combined with the X-Guard system. Modular and flexible. X-Protect is a range of unsurpassed modular crash protection barrier systems with few system components and integrated damping. X-Protect adapts to your workplace and allows quick modification, or repair and replacement, of existing barriers. If you have installed Axelent's X-Guard machinery protection system, it is easy to combine the X-Protect range with it. The connecting bollard is available in three heights to match our most common related wall element products. Starting with the bollard, you can then select any configuration of X-Protect that you like.

GBP 369.99

1

AXELENT X-Protect Crash Protection Bollard Floor Anchoring Height 350 mm

X-Protect crash protection bollard, floor anchoring, height 350 mm. Supplied = flat pack. Type of mounting = fixed anchor M10x106. Overall length = 200 mm. Overall width = 200 mm. Overall height = 350 mm. Colour = zinc yellow RAL 1018, graphite black RAL 9011. Material = polypropylene. Weight = 30.84 kg. Place of use = indoor use. Easy assembly and non-marking anchoring system. Striking, highly visible black and yellow colour scheme. Sustainable and environmentally friendly - all parts are recyclable. X-Protect is a range of unsurpassed modular crash protection barrier systems with few system components and integrated damping. X-Protect adapts to your workplace and allows quick modification, or repair and replacement, of existing barriers. Use the X-Protect bollard to protect doors, free standing corners and machinery.

GBP 399.99

1

AXELENT X-STORE 2.0 Partition System, Wall Section, Height 1100mm, Width 1500mm

X-STORE 2.0 partition system, wall section, height 1100 mm, width 1500 mm. Supplied = pre-assembled, final assembly by customer. Section height = 1100 mm. Section width = 1500 mm. Colour = papyrus white RAL 9018. Mesh size = 60x50 mm. Finish = powder coated. Frame profile = 19x19 mm. Frame material = rectangular steel pipe. Stiffening profile = 15x15 mm. Material of mesh = steel. Thickness of wire = horizontal 2.5 mm, vertical 3.0 mm. Floor clearance = 100 mm. Product type = machine protective fencing partition systems. Modular concept - height and width can be adapted. Safety fence can be structured to reach the ceiling. Disassembly of one wall section without affecting other sections. Quick and easy fastening of the wall sections. The X-STORE 2.0 partition system was developed to ensure easy and safe access to storage areas. The option of fastening wall sections and uprights separately are one of the advantages. Only one type of upright, also for assembly in corner areas, is needed to realise a safety fence project. Easy to adapt: the wall elements of the X-Store 2.0 system are available in two heights and various widths Uprights and extension elements allow your industrial and warehouse partitions to be adapted exactly to your requirements. An adjustable balancing sheet rounds off the system. Frame and mesh Phosphate coated/powder coated in papyrus white RAL 9018. Powder coated uprights (for indoor use) Combination with a door package The wide range of locking mechanisms, locks and doors of the market-tested Axelent X-GUARD CLASSIC safety fence series provide ideal door solutions. When ordering doors kits, the required X-Guard Classic door panel elements and the corresponding locking mechanisms must be included in your order. For the correct installation of an add-on door kit, the door upright KK no. 650208 and the bracket KK no. 650210 for connecting an X-Store 2.0 element to the door support are required.

GBP 249.99

1

AXELENT X-STORE 2.0 Partition System, Wall Section, Height 2200mm, Width 250mm

X-STORE 2.0 partition system, wall section, height 2200 mm, width 250 mm. Supplied = pre-assembled, final assembly by customer. Section height = 2200 mm. Section width = 250 mm. Colour = papyrus white RAL 9018. Mesh size = 60x50 mm. Finish = powder coated. Frame profile = 19x19 mm. Frame material = rectangular steel pipe. Stiffening profile = 15x15 mm. Material of mesh = steel. Thickness of wire = horizontal 2.5 mm, vertical 3.0 mm. Floor clearance = 100 mm. Product type = machine protective fencing partition systems. Modular concept - height and width can be adapted. Safety fence can be structured to reach the ceiling. Disassembly of one wall section without affecting other sections. Quick and easy fastening of the wall sections. The X-STORE 2.0 partition system was developed to ensure easy and safe access to storage areas. The option of fastening wall sections and uprights separately are one of the advantages. Only one type of upright, also for assembly in corner areas, is needed to realise a safety fence project. Easy to adapt: the wall elements of the X-Store 2.0 system are available in two heights and various widths Uprights and extension elements allow your industrial and warehouse partitions to be adapted exactly to your requirements. An adjustable balancing sheet rounds off the system. Frame and mesh Phosphate coated/powder coated in papyrus white RAL 9018. Powder coated uprights (for indoor use) Combination with a door package The wide range of locking mechanisms, locks and doors of the market-tested Axelent X-GUARD CLASSIC safety fence series provide ideal door solutions. When ordering doors kits, the required X-Guard Classic door panel elements and the corresponding locking mechanisms must be included in your order. For the correct installation of an add-on door kit, the door upright KK no. 650208 and the bracket KK no. 650210 for connecting an X-Store 2.0 element to the door support are required.

GBP 209.99

1

AXELENT X-STORE 2.0 Partition System, Wall Section, Height 2200mm, Width 700mm

X-STORE 2.0 partition system, wall section, height 2200 mm, width 700 mm. Supplied = pre-assembled, final assembly by customer. Section height = 2200 mm. Section width = 700 mm. Colour = papyrus white RAL 9018. Mesh size = 60x50 mm. Finish = powder coated. Frame profile = 19x19 mm. Frame material = rectangular steel pipe. Stiffening profile = 15x15 mm. Material of mesh = steel. Thickness of wire = horizontal 2.5 mm, vertical 3.0 mm. Floor clearance = 100 mm. Product type = machine protective fencing partition systems. Modular concept - height and width can be adapted. Safety fence can be structured to reach the ceiling. Disassembly of one wall section without affecting other sections. Quick and easy fastening of the wall sections. The X-STORE 2.0 partition system was developed to ensure easy and safe access to storage areas. The option of fastening wall sections and uprights separately are one of the advantages. Only one type of upright, also for assembly in corner areas, is needed to realise a safety fence project. Easy to adapt: the wall elements of the X-Store 2.0 system are available in two heights and various widths Uprights and extension elements allow your industrial and warehouse partitions to be adapted exactly to your requirements. An adjustable balancing sheet rounds off the system. Frame and mesh Phosphate coated/powder coated in papyrus white RAL 9018. Powder coated uprights (for indoor use) Combination with a door package The wide range of locking mechanisms, locks and doors of the market-tested Axelent X-GUARD CLASSIC safety fence series provide ideal door solutions. When ordering doors kits, the required X-Guard Classic door panel elements and the corresponding locking mechanisms must be included in your order. For the correct installation of an add-on door kit, the door upright KK no. 650208 and the bracket KK no. 650210 for connecting an X-Store 2.0 element to the door support are required.

GBP 249.99

1

AXELENT X-STORE 2.0 Partition System, Wall Section, Height 2200mm, Width 1500mm

X-STORE 2.0 partition system, wall section, height 2200 mm, width 1500 mm. Supplied = pre-assembled, final assembly by customer. Section height = 2200 mm. Section width = 1500 mm. Colour = papyrus white RAL 9018. Mesh size = 60x50 mm. Finish = powder coated. Frame profile = 19x19 mm. Frame material = rectangular steel pipe. Stiffening profile = 15x15 mm. Material of mesh = steel. Thickness of wire = horizontal 2.5 mm, vertical 3.0 mm. Floor clearance = 100 mm. Product type = machine protective fencing partition systems. Modular concept - height and width can be adapted. Safety fence can be structured to reach the ceiling. Disassembly of one wall section without affecting other sections. Quick and easy fastening of the wall sections. The X-STORE 2.0 partition system was developed to ensure easy and safe access to storage areas. The option of fastening wall sections and uprights separately are one of the advantages. Only one type of upright, also for assembly in corner areas, is needed to realise a safety fence project. Easy to adapt: the wall elements of the X-Store 2.0 system are available in two heights and various widths Uprights and extension elements allow your industrial and warehouse partitions to be adapted exactly to your requirements. An adjustable balancing sheet rounds off the system. Frame and mesh Phosphate coated/powder coated in papyrus white RAL 9018. Powder coated uprights (for indoor use) Combination with a door package The wide range of locking mechanisms, locks and doors of the market-tested Axelent X-GUARD CLASSIC safety fence series provide ideal door solutions. When ordering doors kits, the required X-Guard Classic door panel elements and the corresponding locking mechanisms must be included in your order. For the correct installation of an add-on door kit, the door upright KK no. 650208 and the bracket KK no. 650210 for connecting an X-Store 2.0 element to the door support are required.

GBP 259.99

1

AXELENT X-STORE 2.0 Partition System, Wall Section, Height 2200mm, Width 1000mm

X-STORE 2.0 partition system, wall section, height 2200 mm, width 1000 mm. Supplied = pre-assembled, final assembly by customer. Section height = 2200 mm. Section width = 1000 mm. Colour = papyrus white RAL 9018. Mesh size = 60x50 mm. Finish = powder coated. Frame profile = 19x19 mm. Frame material = rectangular steel pipe. Stiffening profile = 15x15 mm. Material of mesh = steel. Thickness of wire = horizontal 2.5 mm, vertical 3.0 mm. Floor clearance = 100 mm. Product type = machine protective fencing partition systems. Modular concept - height and width can be adapted. Safety fence can be structured to reach the ceiling. Disassembly of one wall section without affecting other sections. Quick and easy fastening of the wall sections. The X-STORE 2.0 partition system was developed to ensure easy and safe access to storage areas. The option of fastening wall sections and uprights separately are one of the advantages. Only one type of upright, also for assembly in corner areas, is needed to realise a safety fence project. Easy to adapt: the wall elements of the X-Store 2.0 system are available in two heights and various widths Uprights and extension elements allow your industrial and warehouse partitions to be adapted exactly to your requirements. An adjustable balancing sheet rounds off the system. Frame and mesh Phosphate coated/powder coated in papyrus white RAL 9018. Powder coated uprights (for indoor use) Combination with a door package The wide range of locking mechanisms, locks and doors of the market-tested Axelent X-GUARD CLASSIC safety fence series provide ideal door solutions. When ordering doors kits, the required X-Guard Classic door panel elements and the corresponding locking mechanisms must be included in your order. For the correct installation of an add-on door kit, the door upright KK no. 650208 and the bracket KK no. 650210 for connecting an X-Store 2.0 element to the door support are required.

GBP 239.99

1

AXELENT X-STORE 2.0 Partition System, Wall Section, Height 2200mm, Width 400mm

X-STORE 2.0 partition system, wall section, height 2200 mm, width 400 mm. Supplied = pre-assembled, final assembly by customer. Section height = 2200 mm. Section width = 400 mm. Colour = papyrus white RAL 9018. Mesh size = 60x50 mm. Finish = powder coated. Frame profile = 19x19 mm. Frame material = rectangular steel pipe. Stiffening profile = 15x15 mm. Material of mesh = steel. Thickness of wire = horizontal 2.5 mm, vertical 3.0 mm. Floor clearance = 100 mm. Product type = machine protective fencing partition systems. Modular concept - height and width can be adapted. Safety fence can be structured to reach the ceiling. Disassembly of one wall section without affecting other sections. Quick and easy fastening of the wall sections. The X-STORE 2.0 partition system was developed to ensure easy and safe access to storage areas. The option of fastening wall sections and uprights separately are one of the advantages. Only one type of upright, also for assembly in corner areas, is needed to realise a safety fence project. Easy to adapt: the wall elements of the X-Store 2.0 system are available in two heights and various widths Uprights and extension elements allow your industrial and warehouse partitions to be adapted exactly to your requirements. An adjustable balancing sheet rounds off the system. Frame and mesh Phosphate coated/powder coated in papyrus white RAL 9018. Powder coated uprights (for indoor use) Combination with a door package The wide range of locking mechanisms, locks and doors of the market-tested Axelent X-GUARD CLASSIC safety fence series provide ideal door solutions. When ordering doors kits, the required X-Guard Classic door panel elements and the corresponding locking mechanisms must be included in your order. For the correct installation of an add-on door kit, the door upright KK no. 650208 and the bracket KK no. 650210 for connecting an X-Store 2.0 element to the door support are required.

GBP 219.99

1

AXELENT X-STORE 2.0 Partition System, Wall Section, Height 2200mm, Width 1200mm

X-STORE 2.0 partition system, wall section, height 2200 mm, width 1200 mm. Supplied = pre-assembled, final assembly by customer. Section height = 2200 mm. Section width = 1200 mm. Colour = papyrus white RAL 9018. Mesh size = 60x50 mm. Finish = powder coated. Frame profile = 19x19 mm. Frame material = rectangular steel pipe. Stiffening profile = 15x15 mm. Material of mesh = steel. Thickness of wire = horizontal 2.5 mm, vertical 3.0 mm. Floor clearance = 100 mm. Product type = machine protective fencing partition systems. Modular concept - height and width can be adapted. Safety fence can be structured to reach the ceiling. Disassembly of one wall section without affecting other sections. Quick and easy fastening of the wall sections. The X-STORE 2.0 partition system was developed to ensure easy and safe access to storage areas. The option of fastening wall sections and uprights separately are one of the advantages. Only one type of upright, also for assembly in corner areas, is needed to realise a safety fence project. Easy to adapt: the wall elements of the X-Store 2.0 system are available in two heights and various widths Uprights and extension elements allow your industrial and warehouse partitions to be adapted exactly to your requirements. An adjustable balancing sheet rounds off the system. Frame and mesh Phosphate coated/powder coated in papyrus white RAL 9018. Powder coated uprights (for indoor use) Combination with a door package The wide range of locking mechanisms, locks and doors of the market-tested Axelent X-GUARD CLASSIC safety fence series provide ideal door solutions. When ordering doors kits, the required X-Guard Classic door panel elements and the corresponding locking mechanisms must be included in your order. For the correct installation of an add-on door kit, the door upright KK no. 650208 and the bracket KK no. 650210 for connecting an X-Store 2.0 element to the door support are required.

GBP 259.99

1

DIGITAL MARKETING

Brand

Colour

Merchant

Price (EUR)