22 results (0,15739 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

ANTON KESSEL GMBH Laptop/Equipment Trolley, With Laptop Compartment, Grey/Blue

ANTON KESSEL GMBH Laptop/Equipment Trolley, With Laptop Compartment, Grey/Blue

Laptop/equipment trolley, with laptop compartment, grey/blue. Supplied = assembled. Overall width = 600 mm. Overall depth = 470 mm. Overall height = 1115 mm. Frame material = sheet steel, powder coated. Frame colour = light grey RAL 7035, gentian blue RAL 5010. Wheel fittings = 4 swivel castors 2 with wheel stops. Fittings = keyboard shelf. Feature = mobile. Cable management = available as accessories. Product type = laboratory/equipment trolleys. With keyboard shelf and laptop compartment. Ideal for inventory, as a mobile office, goods receipt, order picking, etc. Extremely manoeuvrable due to 4 swivel castors - also ideal for narrow aisles. Sturdy, attractive steel construction. Powder coated in light grey RAL 7035/gentian blue RAL 5010. Work surface width x depth 600 x 365 mm. Integrated push handle. Including separate keyboard shelf. Lower storage shelf width x depth 600 x 470 mm. 4 swivel castors 100 mm, 2 with wheel stops. Lockable laptop compartment (WxDxH 495 x 290 x 65 mm) under the worktop. Welded in place.

GBP 1139.99
1

ANTON KESSEL GMBH Laptop/Equipment Trolley, With Laptop Compartment, Additional Shelf, Grey/Blue

ANTON KESSEL GMBH Laptop/Equipment Trolley, With Laptop Compartment, Additional Shelf, Grey/Blue

Laptop/equipment trolley, with laptop compartment, additional shelf, grey/blue. Supplied = assembled. Overall width = 600 mm. Overall depth = 470 mm. Overall height = 1115 mm. Frame material = sheet steel, powder coated. Frame colour = light grey RAL 7035, gentian blue RAL 5010. Wheel fittings = 4 swivel castors 2 with wheel stops. Fittings = keyboard shelf. Feature = mobile. Cable management = available as accessories. Product type = laboratory/equipment trolleys. With keyboard shelf, laptop compartment and shelf incl. book rests. Ideal for inventory, as a mobile office, goods receipt, order picking, etc. Extremely manoeuvrable due to 4 swivel castors - also ideal for narrow aisles. Sturdy, attractive steel construction. Powder coated in light grey RAL 7035/gentian blue RAL 5010. Work surface width x depth 600 x 365 mm. Integrated push handle. Including separate keyboard shelf. Lower storage shelf width x depth 600 x 470 mm. 4 swivel castors 100 mm, 2 with wheel stops. Lockable laptop compartment under the worktop. Shelf with book rests. Both parts are welded in place.

GBP 1329.99
1

ANTON KESSEL GMBH Laptop/Equipment Trolley, With Laptop Compartment, Suspension File Drawer, Grey/Blue

ANTON KESSEL GMBH Laptop/Equipment Trolley, With Laptop Compartment, Suspension File Drawer, Grey/Blue

Laptop/equipment trolley, with laptop compartment, suspension file drawer, grey/blue. Supplied = assembled. Overall width = 600 mm. Overall depth = 470 mm. Overall height = 1115 mm. Frame material = sheet steel, powder coated. Frame colour = light grey RAL 7035, gentian blue RAL 5010. Wheel fittings = 4 swivel castors 2 with wheel stops. Fittings = keyboard shelf. Feature = mobile. Cable management = available as accessories. Product type = laboratory/equipment trolleys. With keyboard shelf, laptop compartment and suspension file frame. Ideal for inventory, as a mobile office, goods receipt, order picking, etc. Extremely manoeuvrable due to 4 swivel castors - also ideal for narrow aisles. Sturdy, attractive steel construction. Powder coated in light grey RAL 7035/gentian blue RAL 5010. Work surface width x depth 600 x 365 mm. Integrated push handle. Including separate keyboard shelf. Lower storage shelf width x depth 600 x 470 mm. 4 swivel castors 100 mm, 2 with wheel stops. Lockable laptop compartment under the worktop (W x D x H 495 x 290 x 65 mm) Suspension file frame for A4. Both parts are welded in place.

GBP 1199.99
1

ANTON KESSEL GMBH Add-on Drawer Unit For Electrically Height Adjustable LIFT Work Tables - WxD 570 X 615mm - Height 600mm, 3 Drawers (180mm High)

ANTON KESSEL GMBH Add-on Drawer Unit For Electrically Height Adjustable LIFT Work Tables - WxD 570 X 615mm - Height 600mm, 3 Drawers (180mm High)

Add-on drawer unit for electrically height adjustable LIFT work tables, WxD 570 x 615 mm, height 600 mm, 3 drawers (180 mm high) Supplied = assembled. Height = 600 mm. Width = 570 mm. Depth = 615 mm. Max. drawer load = 100 kg. Number of drawers = 3 pcs. Drawer height = 3x180 mm. Drawer extension = 100% extendable. Body colour = light grey RAL 7035. Front colour = gentian blue RAL 5010. Drawer guide = differential guide rail. Lock type = central locking (replaceable cylinder) Internal drawer dimensions = 410x540 mm. Additional storage space. High max. load: 100 kg max. drawer load. 100% full extension - 100% utilisation. Aluminium grip rails which can be labelled. The add-on drawer unit is an ideal extension option for all work tables e.g. in the LIFT series. The add-on drawer unit is easy to bolt in place under the respective worktop (min. 40 mm thick) Internal drawer dimensions width x depth 410 x 540 mm, max. drawer load 100 kg with evenly distributed load, full extension with individual pull out stop. Central locking and 2 keys (DOM replaceable cylinder) Sturdy, powder coated steel construction in light grey RAL 7035/gentian blue RAL 5010.

GBP 1449.99
1

ANTON KESSEL GMBH Add-on Drawer Unit For Electrically Height Adjustable LIFT Work Tables - WxD 570 X 615mm - Height 420mm, 3 Drawers (90/180mm High)

ANTON KESSEL GMBH Add-on Drawer Unit For Electrically Height Adjustable LIFT Work Tables - WxD 570 X 615mm - Height 420mm, 3 Drawers (90/180mm High)

Add-on drawer unit for electrically height adjustable LIFT work tables, WxD 570 x 615 mm, height 420 mm, 3 drawers (90/180 mm high) Supplied = assembled. Height = 420 mm. Width = 570 mm. Depth = 615 mm. Max. drawer load = 100 kg. Number of drawers = 3 pcs. Drawer height = 2x90, 1x180 mm. Drawer extension = 100% extendable. Body colour = light grey RAL 7035. Front colour = gentian blue RAL 5010. Drawer guide = differential guide rail. Lock type = central locking (replaceable cylinder) Internal drawer dimensions = 410x540 mm. Additional storage space. High max. load: 100 kg max. drawer load. 100% full extension - 100% utilisation. Aluminium grip rails which can be labelled. The add-on drawer unit is an ideal extension option for all work tables e.g. in the LIFT series. The add-on drawer unit is easy to bolt in place under the respective worktop (min. 40 mm thick) Internal drawer dimensions width x depth 410 x 540 mm, max. drawer load 100 kg with evenly distributed load, full extension with individual pull out stop. Central locking and 2 keys (DOM replaceable cylinder) Sturdy, powder coated steel construction in light grey RAL 7035/gentian blue RAL 5010.

GBP 1299.99
1

ANTON KESSEL GMBH Add-on Drawer Unit For Electrically Height Adjustable LIFT Work Tables - WxD 570 X 615mm - Height 420mm, 3 Drawers (90/120/150mm

ANTON KESSEL GMBH Add-on Drawer Unit For Electrically Height Adjustable LIFT Work Tables - WxD 570 X 615mm - Height 420mm, 3 Drawers (90/120/150mm

Add-on drawer unit for electrically height adjustable LIFT work tables, WxD 570 x 615 mm, height 420 mm, 3 drawers (90/120/150 mm high) Supplied = assembled. Height = 420 mm. Width = 570 mm. Depth = 615 mm. Max. drawer load = 100 kg. Number of drawers = 3 pcs. Drawer height = 1x90, 1x120, 1x150 mm. Drawer extension = 100% extendable. Body colour = light grey RAL 7035. Front colour = gentian blue RAL 5010. Drawer guide = differential guide rail. Lock type = central locking (replaceable cylinder) Internal drawer dimensions = 410x540 mm. Additional storage space. High max. load: 100 kg max. drawer load. 100% full extension - 100% utilisation. Aluminium grip rails which can be labelled. The add-on drawer unit is an ideal extension option for all work tables e.g. in the LIFT series. The add-on drawer unit is easy to bolt in place under the respective worktop (min. 40 mm thick) Internal drawer dimensions width x depth 410 x 540 mm, max. drawer load 100 kg with evenly distributed load, full extension with individual pull out stop. Central locking and 2 keys (DOM replaceable cylinder) Sturdy, powder coated steel construction in light grey RAL 7035/gentian blue RAL 5010.

GBP 1299.99
1

ANTON KESSEL GMBH Add-on Drawer Unit For Electrically Height Adjustable LIFT Work Tables - WxD 570 X 615mm - Height 600mm, 3 Drawers (90/360mm High)

ANTON KESSEL GMBH Add-on Drawer Unit For Electrically Height Adjustable LIFT Work Tables - WxD 570 X 615mm - Height 600mm, 3 Drawers (90/360mm High)

Add-on drawer unit for electrically height adjustable LIFT work tables, WxD 570 x 615 mm, height 600 mm, 3 drawers (90/360 mm high) Supplied = assembled. Height = 600 mm. Width = 570 mm. Depth = 615 mm. Max. drawer load = 100 kg. Number of drawers = 3 pcs. Drawer height = 2x90, 1x360 mm. Drawer extension = 100% extendable. Body colour = light grey RAL 7035. Front colour = gentian blue RAL 5010. Drawer guide = differential guide rail. Lock type = central locking (replaceable cylinder) Internal drawer dimensions = 410x540 mm. Additional storage space. High max. load: 100 kg max. drawer load. 100% full extension - 100% utilisation. Aluminium grip rails which can be labelled. The add-on drawer unit is an ideal extension option for all work tables e.g. in the LIFT series. The add-on drawer unit is easy to bolt in place under the respective worktop (min. 40 mm thick) Internal drawer dimensions width x depth 410 x 540 mm, max. drawer load 100 kg with evenly distributed load, full extension with individual pull out stop. Central locking and 2 keys (DOM replaceable cylinder) Sturdy, powder coated steel construction in light grey RAL 7035/gentian blue RAL 5010.

GBP 1399.99
1

ANTON KESSEL GMBH Add-on Drawer Unit For Electrically Height Adjustable LIFT Work Tables - WxD 570 X 615mm - Height 600mm, 2 Drawers (180/360mm High)

ANTON KESSEL GMBH Add-on Drawer Unit For Electrically Height Adjustable LIFT Work Tables - WxD 570 X 615mm - Height 600mm, 2 Drawers (180/360mm High)

Add-on drawer unit for electrically height adjustable LIFT work tables, WxD 570 x 615 mm, height 600 mm, 2 drawers (180/360 mm high) Supplied = assembled. Height = 600 mm. Width = 570 mm. Depth = 615 mm. Max. drawer load = 100 kg. Number of drawers = 2 pcs. Drawer height = 1x180, 1x360 mm. Drawer extension = 100% extendable. Body colour = light grey RAL 7035. Front colour = gentian blue RAL 5010. Drawer guide = differential guide rail. Lock type = central locking (replaceable cylinder) Internal drawer dimensions = 410x540 mm. Additional storage space. High max. load: 100 kg max. drawer load. 100% full extension - 100% utilisation. Aluminium grip rails which can be labelled. The add-on drawer unit is an ideal extension option for all work tables e.g. in the LIFT series. The add-on drawer unit is easy to bolt in place under the respective worktop (min. 40 mm thick) Internal drawer dimensions width x depth 410 x 540 mm, max. drawer load 100 kg with evenly distributed load, full extension with individual pull out stop. Central locking and 2 keys (DOM replaceable cylinder) Sturdy, powder coated steel construction in light grey RAL 7035/gentian blue RAL 5010.

GBP 1199.99
1

ANTON KESSEL GMBH Add-on Drawer Unit For Electrically Height Adjustable LIFT Work Tables - WxD 570 X 615mm - Height 330mm, 3 Drawers

ANTON KESSEL GMBH Add-on Drawer Unit For Electrically Height Adjustable LIFT Work Tables - WxD 570 X 615mm - Height 330mm, 3 Drawers

Add-on drawer unit for electrically height adjustable LIFT work tables, WxD 570 x 615 mm, height 330 mm, 3 drawers. Supplied = assembled. Height = 330 mm. Width = 570 mm. Depth = 615 mm. Max. drawer load = 100 kg. Number of drawers = 3 pcs. Drawer height = 60/90/120 mm. Drawer extension = 100% extendable. Body colour = light grey RAL 7035. Front colour = gentian blue RAL 5010. Drawer guide = differential guide rail. Lock type = central locking (replaceable cylinder) Internal drawer dimensions = 410x540 mm. Additional storage space. High max. load: 100 kg max. drawer load. 100% full extension - 100% utilisation. Aluminium grip rails which can be labelled. The add-on drawer unit is an ideal extension option for all work tables e.g. in the LIFT series. The add-on drawer unit is easy to bolt in place under the respective worktop (min. 40 mm thick) Internal drawer dimensions width x depth 410 x 540 mm, max. drawer load 100 kg with evenly distributed load, full extension with individual pull out stop. Central locking and 2 keys (DOM replaceable cylinder) Sturdy, powder coated steel construction in light grey RAL 7035/gentian blue RAL 5010.

GBP 1199.99
1

ANTON KESSEL GMBH Add-on Drawer Unit For Electrically Height Adjustable LIFT Work Tables - WxD 570 X 615mm - Height 330mm, 2 Drawers

ANTON KESSEL GMBH Add-on Drawer Unit For Electrically Height Adjustable LIFT Work Tables - WxD 570 X 615mm - Height 330mm, 2 Drawers

Add-on drawer unit for electrically height adjustable LIFT work tables, WxD 570 x 615 mm, height 330 mm, 2 drawers. Supplied = assembled. Height = 330 mm. Width = 570 mm. Depth = 615 mm. Max. drawer load = 100 kg. Number of drawers = 2 pcs. Drawer height = 90/180 mm. Drawer extension = 100% extendable. Body colour = light grey RAL 7035. Front colour = gentian blue RAL 5010. Drawer guide = differential guide rail. Lock type = central locking (replaceable cylinder) Internal drawer dimensions = 410x540 mm. Additional storage space. High max. load: 100 kg max. drawer load. 100% full extension - 100% utilisation. Aluminium grip rails which can be labelled. The add-on drawer unit is an ideal extension option for all work tables e.g. in the LIFT series. The add-on drawer unit is easy to bolt in place under the respective worktop (min. 40 mm thick) Internal drawer dimensions width x depth 410 x 540 mm, max. drawer load 100 kg with evenly distributed load, full extension with individual pull out stop. Central locking and 2 keys (DOM replaceable cylinder) Sturdy, powder coated steel construction in light grey RAL 7035/gentian blue RAL 5010.

GBP 999.99
1

ANTON KESSEL GMBH Mobile Drawer Unit, HxWxD 575 X 570 X 615mm, 3 Drawers, 2 X 90/1 X 180mm High

ANTON KESSEL GMBH Mobile Drawer Unit, HxWxD 575 X 570 X 615mm, 3 Drawers, 2 X 90/1 X 180mm High

Mobile drawer unit, HxWxD 575 x 570 x 615 mm, 3 drawers, 2 x 90/1 x 180 mm high. Supplied = pre-assembled, final assembly by customer. Overall width = 570 mm. Overall height = 575 mm. Overall depth = 615 mm. Number of drawers = 3 pcs. Drawer height = 2x90, 1x180 mm. Body colour = light grey RAL 7035. Drawer colour = gentian blue RAL 5010. Drawer extension = 100% extendable. Max. drawer load = 100 kg. Drawer width = 410 mm. Drawer depth = 540 mm. Drawer guide = differential guide rail. Wheel fittings = 4 swivel castors 2 with wheel stops. Lock type = central locking. Compact and easy to manoeuvre. Durable and robust. 100% full extension - 100% utilisation. The mobile drawer unit is a compact and manoeuvrable workshop aid. Due to its overall height of 570 mm, it ideally fits under height adjustable work tables operated by electric motors from the LIFT series. Internal drawer dimensions 410 x 540 mm, max. drawer load 100 kg with evenly distributed load, full extension with individual pull out stops. Sturdy, powder coated steel construction in light grey RAL 7035/gentian blue RAL 5010. Housing features a practical storage tray at the top including non-slip matting. Central locking and 2 keys (DOM replaceable cylinder) 2 swivel castors with wheel stops + 2 fixed castors, 125 mm.

GBP 1339.99
1

ANTON KESSEL GMBH Mobile Drawer Unit, HxWxD 575 X 570 X 615mm, 3 Drawers, 3 X 120mm High

ANTON KESSEL GMBH Mobile Drawer Unit, HxWxD 575 X 570 X 615mm, 3 Drawers, 3 X 120mm High

Mobile drawer unit, HxWxD 575 x 570 x 615 mm, 3 drawers, 3 x 120 mm high. Supplied = pre-assembled, final assembly by customer. Overall width = 570 mm. Overall height = 575 mm. Overall depth = 615 mm. Number of drawers = 3 pcs. Drawer height = 3x120 mm. Body colour = light grey RAL 7035. Drawer colour = gentian blue RAL 5010. Drawer extension = 100% extendable. Max. drawer load = 100 kg. Drawer width = 410 mm. Drawer depth = 540 mm. Drawer guide = differential guide rail. Wheel fittings = 4 swivel castors 2 with wheel stops. Lock type = central locking. Compact and easy to manoeuvre. Durable and robust. 100% full extension - 100% utilisation. The mobile drawer unit is a compact and manoeuvrable workshop aid. Due to its overall height of 570 mm, it ideally fits under height adjustable work tables operated by electric motors from the LIFT series. Internal drawer dimensions 410 x 540 mm, max. drawer load 100 kg with evenly distributed load, full extension with individual pull out stops. Sturdy, powder coated steel construction in light grey RAL 7035/gentian blue RAL 5010. Housing features a practical storage tray at the top including non-slip matting. Central locking and 2 keys (DOM replaceable cylinder) 2 swivel castors with wheel stops + 2 fixed castors, 125 mm.

GBP 1339.99
1

ANTON KESSEL GMBH Mobile Drawer Unit, HxWxD 575 X 570 X 615mm, 3 Drawers, 1 X 90/1 X 120/1 X 150mm High

ANTON KESSEL GMBH Mobile Drawer Unit, HxWxD 575 X 570 X 615mm, 3 Drawers, 1 X 90/1 X 120/1 X 150mm High

Mobile drawer unit, HxWxD 575 x 570 x 615 mm, 3 drawers, 1 x 90/1 x 120/1 x 150 mm high. Supplied = pre-assembled, final assembly by customer. Overall width = 570 mm. Overall height = 575 mm. Overall depth = 615 mm. Number of drawers = 3 pcs. Drawer height = 1x90, 1x120, 1x150 mm. Body colour = light grey RAL 7035. Drawer colour = gentian blue RAL 5010. Drawer extension = 100% extendable. Max. drawer load = 100 kg. Drawer width = 410 mm. Drawer depth = 540 mm. Drawer guide = differential guide rail. Wheel fittings = 4 swivel castors 2 with wheel stops. Lock type = central locking. Compact and easy to manoeuvre. Durable and robust. 100% full extension - 100% utilisation. The mobile drawer unit is a compact and manoeuvrable workshop aid. Due to its overall height of 570 mm, it ideally fits under height adjustable work tables operated by electric motors from the LIFT series. Internal drawer dimensions 410 x 540 mm, max. drawer load 100 kg with evenly distributed load, full extension with individual pull out stops. Sturdy, powder coated steel construction in light grey RAL 7035/gentian blue RAL 5010. Housing features a practical storage tray at the top including non-slip matting. Central locking and 2 keys (DOM replaceable cylinder) 2 swivel castors with wheel stops + 2 fixed castors, 125 mm.

GBP 1339.99
1

ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Plastic Coated Worktop, Width 1500mm

ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Plastic Coated Worktop, Width 1500mm

Electrically height adjustable work table, plastic coated worktop, width 1500 mm. Supplied = assembled. Worktop width = 1500 mm. Worktop depth = 800 mm. Type of worktop = plastic laminate (HPL) Panel thickness = 40 mm. Height adjustment range = 740 - 1140 mm. Frame material = steel, powder coated. Static distributed load = 600 kg. Frame design = lifting column with rear panel board. Frame colour = light grey RAL 7035. Height adjustment using an electric motor from 740 - 1140 mm at the touch of a button. High max. load of up to 900 kg. Ergonomic work even when alternating between standing and sitting. Four working heights can be programmed. Also ideal for workstations used in shifts. Ideal leg room and space for a mobile drawer unit under the worktop. Height adjustable by means of telescopic lift system operated by an electric motor. Height adjustment range 740 - 1140 mm. The working height can be adjusted continuously using the control panel. In addition, 4 preset working heights can be programmed. Lifting capacity per lifting column 300 kg. Total lifting capacity approx. 830 kg with evenly distributed load (900 kg lifting force minus the weight of the worktop) The two lifting columns are connected by the worktop and rear panel, thereby guaranteeing a secure and stable footing. The rear panel replaces the cross beams usually fitted in the centre between the lifting columns - the entire space between the feet can be utilised. The U-shaped rear panel in light grey RAL 7035 features good reinforcement due to additional angled profiles, and is also able to be used as a side panel when two benches are installed back to back. The tabletop depth of 800 mm provides a large work surface. This makes the table suitable as a basis for ergonomically designed system workstations with workbench add-ons. Plastic coated worktop. Delivered assembled - ready for immediate use.

GBP 5199.99
1

ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Plastic Coated Worktop, Width 2800mm

ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Plastic Coated Worktop, Width 2800mm

Electrically height adjustable work table, plastic coated worktop, width 2800 mm. Supplied = assembled. Worktop width = 2800 mm. Worktop depth = 800 mm. Type of worktop = plastic laminate (HPL) Panel thickness = 40 mm. Height adjustment range = 740 - 1140 mm. Frame material = steel, powder coated. Static distributed load = 900 kg. Frame design = lifting column with rear panel board. Frame colour = light grey RAL 7035. Height adjustment using an electric motor from 740 - 1140 mm at the touch of a button. High max. load of up to 900 kg. Ergonomic work even when alternating between standing and sitting. Four working heights can be programmed. Also ideal for workstations used in shifts. Ideal leg room and space for a mobile drawer unit under the worktop. Height adjustable by means of telescopic lift system operated by an electric motor. Height adjustment range 740 - 1140 mm. The working height can be adjusted continuously using the control panel. In addition, 4 preset working heights can be programmed. Lifting capacity per lifting column 300 kg. Total lifting capacity approx. 830 kg with evenly distributed load (900 kg lifting force minus the weight of the worktop) The two lifting columns are connected by the worktop and rear panel, thereby guaranteeing a secure and stable footing. The rear panel replaces the cross beams usually fitted in the centre between the lifting columns - the entire space between the feet can be utilised. The U-shaped rear panel in light grey RAL 7035 features good reinforcement due to additional angled profiles, and is also able to be used as a side panel when two benches are installed back to back. The tabletop depth of 800 mm provides a large work surface. This makes the table suitable as a basis for ergonomically designed system workstations with workbench add-ons. Plastic coated worktop. Delivered assembled - ready for immediate use.

GBP 6999.99
1

ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Plastic Coated Worktop, Width 2000mm

ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Plastic Coated Worktop, Width 2000mm

Electrically height adjustable work table, plastic coated worktop, width 2000 mm. Supplied = assembled. Worktop width = 2000 mm. Worktop depth = 800 mm. Type of worktop = plastic laminate (HPL) Panel thickness = 40 mm. Height adjustment range = 740 - 1140 mm. Frame material = steel, powder coated. Static distributed load = 600 kg. Frame design = lifting column with rear panel board. Frame colour = light grey RAL 7035. Height adjustment using an electric motor from 740 - 1140 mm at the touch of a button. High max. load of up to 900 kg. Ergonomic work even when alternating between standing and sitting. Four working heights can be programmed. Also ideal for workstations used in shifts. Ideal leg room and space for a mobile drawer unit under the worktop. Height adjustable by means of telescopic lift system operated by an electric motor. Height adjustment range 740 - 1140 mm. The working height can be adjusted continuously using the control panel. In addition, 4 preset working heights can be programmed. Lifting capacity per lifting column 300 kg. Total lifting capacity approx. 830 kg with evenly distributed load (900 kg lifting force minus the weight of the worktop) The two lifting columns are connected by the worktop and rear panel, thereby guaranteeing a secure and stable footing. The rear panel replaces the cross beams usually fitted in the centre between the lifting columns - the entire space between the feet can be utilised. The U-shaped rear panel in light grey RAL 7035 features good reinforcement due to additional angled profiles, and is also able to be used as a side panel when two benches are installed back to back. The tabletop depth of 800 mm provides a large work surface. This makes the table suitable as a basis for ergonomically designed system workstations with workbench add-ons. Plastic coated worktop. Delivered assembled - ready for immediate use.

GBP 5199.99
1

ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Solid Beech Worktop, Width 1500mm

ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Solid Beech Worktop, Width 1500mm

Electrically height adjustable work table, solid beech worktop, width 1500 mm. Supplied = assembled. Worktop width = 1500 mm. Worktop depth = 800 mm. Type of worktop = solid beech wooden panel. Panel thickness = 40 mm. Height adjustment range = 740 - 1140 mm. Frame material = steel, powder coated. Static distributed load = 600 kg. Frame design = lifting column with rear panel board. Frame colour = light grey RAL 7035. Height adjustment using an electric motor from 740 - 1140 mm at the touch of a button. High max. load of up to 900 kg. Ergonomic work even when alternating between standing and sitting. Four working heights can be programmed. Also ideal for workstations used in shifts. Ideal leg room and space for a mobile drawer unit under the worktop. Height adjustable by means of telescopic lift system operated by an electric motor. Height adjustment range 740 - 1140 mm. The working height can be adjusted continuously using the control panel. In addition, 4 preset working heights can be programmed. Lifting capacity per lifting column 300 kg. Total lifting capacity approx. 830 kg with evenly distributed load (900 kg lifting force minus the weight of the worktop) The two lifting columns are connected by the worktop and rear panel, thereby guaranteeing a secure and stable footing. The rear panel replaces the cross beams usually fitted in the centre between the lifting columns - the entire space between the feet can be utilised. The U-shaped rear panel in light grey RAL 7035 features good reinforcement due to additional angled profiles, and is also able to be used as a side panel when two benches are installed back to back. The tabletop depth of 800 mm provides a large work surface. This makes the table suitable as a basis for ergonomically designed system workstations with workbench add-ons. Solid beech worktop, 40 mm thick: Particularly robust and non-warping due to lengthwise, glued wood construction. Wood from certified, sustainable forestry operations. Delivered assembled - ready for immediate use.

GBP 5299.99
1

ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Worktop With Universal Lining, Width 1500mm

ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Worktop With Universal Lining, Width 1500mm

Electrically height adjustable work table, worktop with universal lining, width 1500 mm. Supplied = assembled. Worktop width = 1500 mm. Worktop depth = 800 mm. Type of worktop = worktop with universal cover. Panel thickness = 40 mm. Height adjustment range = 740 - 1140 mm. Frame material = steel, powder coated. Static distributed load = 600 kg. Frame design = lifting column with rear panel board. Frame colour = light grey RAL 7035. Height adjustment using an electric motor from 740 - 1140 mm at the touch of a button. High max. load of up to 900 kg. Ergonomic work even when alternating between standing and sitting. Four working heights can be programmed. Also ideal for workstations used in shifts. Ideal leg room and space for a mobile drawer unit under the worktop. Height adjustable by means of telescopic lift system operated by an electric motor. Height adjustment range 740 - 1140 mm. The working height can be adjusted continuously using the control panel. In addition, 4 preset working heights can be programmed. Lifting capacity per lifting column 300 kg. Total lifting capacity approx. 830 kg with evenly distributed load (900 kg lifting force minus the weight of the worktop) The two lifting columns are connected by the worktop and rear panel, thereby guaranteeing a secure and stable footing. The rear panel replaces the cross beams usually fitted in the centre between the lifting columns - the entire space between the feet can be utilised. The U-shaped rear panel in light grey RAL 7035 features good reinforcement due to additional angled profiles, and is also able to be used as a side panel when two benches are installed back to back. The tabletop depth of 800 mm provides a large work surface. This makes the table suitable as a basis for ergonomically designed system workstations with workbench add-ons. Universal worktop, 40 mm thick: Worktop with an abrasion resistant, antistatic coating. Resistant to brief exposure to weak acids and alkalis and temperatures up to approx. 250 C. Resistant to prolonged exposure to grease and oil. ABS edging. Delivered assembled - ready for immediate use.

GBP 5499.99
1

ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Solid Beech Worktop, Width 2800mm

ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Solid Beech Worktop, Width 2800mm

Electrically height adjustable work table, solid beech worktop, width 2800 mm. Supplied = assembled. Worktop width = 2800 mm. Worktop depth = 800 mm. Type of worktop = solid beech wooden panel. Panel thickness = 40 mm. Height adjustment range = 740 - 1140 mm. Frame material = steel, powder coated. Static distributed load = 900 kg. Frame design = lifting column with rear panel board. Frame colour = light grey RAL 7035. Height adjustment using an electric motor from 740 - 1140 mm at the touch of a button. High max. load of up to 900 kg. Ergonomic work even when alternating between standing and sitting. Four working heights can be programmed. Also ideal for workstations used in shifts. Ideal leg room and space for a mobile drawer unit under the worktop. Height adjustable by means of telescopic lift system operated by an electric motor. Height adjustment range 740 - 1140 mm. The working height can be adjusted continuously using the control panel. In addition, 4 preset working heights can be programmed. Lifting capacity per lifting column 300 kg. Total lifting capacity approx. 830 kg with evenly distributed load (900 kg lifting force minus the weight of the worktop) The two lifting columns are connected by the worktop and rear panel, thereby guaranteeing a secure and stable footing. The rear panel replaces the cross beams usually fitted in the centre between the lifting columns - the entire space between the feet can be utilised. The U-shaped rear panel in light grey RAL 7035 features good reinforcement due to additional angled profiles, and is also able to be used as a side panel when two benches are installed back to back. The tabletop depth of 800 mm provides a large work surface. This makes the table suitable as a basis for ergonomically designed system workstations with workbench add-ons. Solid beech worktop, 40 mm thick: Particularly robust and non-warping due to lengthwise, glued wood construction. Wood from certified, sustainable forestry operations. Delivered assembled - ready for immediate use.

GBP 7299.99
1

ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Solid Beech Worktop, Width 2000mm

ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Solid Beech Worktop, Width 2000mm

Electrically height adjustable work table, solid beech worktop, width 2000 mm. Supplied = assembled. Worktop width = 2000 mm. Worktop depth = 800 mm. Type of worktop = solid beech wooden panel. Panel thickness = 40 mm. Height adjustment range = 740 - 1140 mm. Frame material = steel, powder coated. Static distributed load = 600 kg. Frame design = lifting column with rear panel board. Frame colour = light grey RAL 7035. Height adjustment using an electric motor from 740 - 1140 mm at the touch of a button. High max. load of up to 900 kg. Ergonomic work even when alternating between standing and sitting. Four working heights can be programmed. Also ideal for workstations used in shifts. Ideal leg room and space for a mobile drawer unit under the worktop. Height adjustable by means of telescopic lift system operated by an electric motor. Height adjustment range 740 - 1140 mm. The working height can be adjusted continuously using the control panel. In addition, 4 preset working heights can be programmed. Lifting capacity per lifting column 300 kg. Total lifting capacity approx. 830 kg with evenly distributed load (900 kg lifting force minus the weight of the worktop) The two lifting columns are connected by the worktop and rear panel, thereby guaranteeing a secure and stable footing. The rear panel replaces the cross beams usually fitted in the centre between the lifting columns - the entire space between the feet can be utilised. The U-shaped rear panel in light grey RAL 7035 features good reinforcement due to additional angled profiles, and is also able to be used as a side panel when two benches are installed back to back. The tabletop depth of 800 mm provides a large work surface. This makes the table suitable as a basis for ergonomically designed system workstations with workbench add-ons. Solid beech worktop, 40 mm thick: Particularly robust and non-warping due to lengthwise, glued wood construction. Wood from certified, sustainable forestry operations. Delivered assembled - ready for immediate use.

GBP 5499.99
1

ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Worktop With Universal Lining, Width 2800mm

ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Worktop With Universal Lining, Width 2800mm

Electrically height adjustable work table, worktop with universal lining, width 2800 mm. Supplied = assembled. Worktop width = 2800 mm. Worktop depth = 800 mm. Type of worktop = worktop with universal cover. Panel thickness = 40 mm. Height adjustment range = 740 - 1140 mm. Frame material = steel, powder coated. Static distributed load = 900 kg. Frame design = lifting column with rear panel board. Frame colour = light grey RAL 7035. Height adjustment using an electric motor from 740 - 1140 mm at the touch of a button. High max. load of up to 900 kg. Ergonomic work even when alternating between standing and sitting. Four working heights can be programmed. Also ideal for workstations used in shifts. Ideal leg room and space for a mobile drawer unit under the worktop. Height adjustable by means of telescopic lift system operated by an electric motor. Height adjustment range 740 - 1140 mm. The working height can be adjusted continuously using the control panel. In addition, 4 preset working heights can be programmed. Lifting capacity per lifting column 300 kg. Total lifting capacity approx. 830 kg with evenly distributed load (900 kg lifting force minus the weight of the worktop) The two lifting columns are connected by the worktop and rear panel, thereby guaranteeing a secure and stable footing. The rear panel replaces the cross beams usually fitted in the centre between the lifting columns - the entire space between the feet can be utilised. The U-shaped rear panel in light grey RAL 7035 features good reinforcement due to additional angled profiles, and is also able to be used as a side panel when two benches are installed back to back. The tabletop depth of 800 mm provides a large work surface. This makes the table suitable as a basis for ergonomically designed system workstations with workbench add-ons. Universal worktop, 40 mm thick: Worktop with an abrasion resistant, antistatic coating. Resistant to brief exposure to weak acids and alkalis and temperatures up to approx. 250 C. Resistant to prolonged exposure to grease and oil. ABS edging. Delivered assembled - ready for immediate use.

GBP 7199.99
1

ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Worktop With Universal Lining, Width 2000mm

ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Worktop With Universal Lining, Width 2000mm

Electrically height adjustable work table, worktop with universal lining, width 2000 mm. Supplied = assembled. Worktop width = 2000 mm. Worktop depth = 800 mm. Type of worktop = worktop with universal cover. Panel thickness = 40 mm. Height adjustment range = 740 - 1140 mm. Frame material = steel, powder coated. Static distributed load = 600 kg. Frame design = lifting column with rear panel board. Frame colour = light grey RAL 7035. Height adjustment using an electric motor from 740 - 1140 mm at the touch of a button. High max. load of up to 900 kg. Ergonomic work even when alternating between standing and sitting. Four working heights can be programmed. Also ideal for workstations used in shifts. Ideal leg room and space for a mobile drawer unit under the worktop. Height adjustable by means of telescopic lift system operated by an electric motor. Height adjustment range 740 - 1140 mm. The working height can be adjusted continuously using the control panel. In addition, 4 preset working heights can be programmed. Lifting capacity per lifting column 300 kg. Total lifting capacity approx. 830 kg with evenly distributed load (900 kg lifting force minus the weight of the worktop) The two lifting columns are connected by the worktop and rear panel, thereby guaranteeing a secure and stable footing. The rear panel replaces the cross beams usually fitted in the centre between the lifting columns - the entire space between the feet can be utilised. The U-shaped rear panel in light grey RAL 7035 features good reinforcement due to additional angled profiles, and is also able to be used as a side panel when two benches are installed back to back. The tabletop depth of 800 mm provides a large work surface. This makes the table suitable as a basis for ergonomically designed system workstations with workbench add-ons. Universal worktop, 40 mm thick: Worktop with an abrasion resistant, antistatic coating. Resistant to brief exposure to weak acids and alkalis and temperatures up to approx. 250 C. Resistant to prolonged exposure to grease and oil. ABS edging. Delivered assembled - ready for immediate use.

GBP 5199.99
1