13 results (0,12316 seconds)

Show all filters

Brand

Colour

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

3M Vinyl Tape 471 Red 50 mm x 33 M

3M Vinyl Tape 471 Red 50 mm x 33 M

Maintains its colour when exposed to abrasion, wear and many solvents Unique stretch properties enable tape to remain stretched to conform to uneven surfaces without lifting and retracting Ideal for use on curved and irregular surfaces Easy to apply, excellent holding strength on many surfaces Available in many distinctive colours (yellow, white, red, black, brown, green, orange, purple, blue and transparent) Available in a wide variety of vivid colours and sizes Suggested Applications Lane and safety marking Marking of equipment pitch points or gears for warning purposes Colour code piping, tools, instruments, etc. Protect parts, equipment or products from abrasion

GBP 39.99
1

3M Segmented Conspicuity Vehicle Markings 957S-72 Red 51 mm x 50 M

3M Segmented Conspicuity Vehicle Markings 957S-72 Red 51 mm x 50 M

Fewer accidents mean less downtime, less contracts missed and savings on repair costs Improve corporate image through being more proactive about safety Protect your company against potential legal action related to third party safety UN-ECE104 Class C approved PVC free product construction with solvent free adhesive technology Thinner and more flexible due to single layer construction No dirt and water penetration at edges Suggested Applications ECE104 is a regulation that establishes guidelines for the use of retro-reflective safety markings on the rear and sides of heavy goods vehicles operating throughout Europe. It requires that homologated retroreflective markings be applied to rigid, curtain and tanker vehicles with a mass over 7.5 tonnes or trailers that have a mass over 3.5 tonnes. The reflective material must carry the E-mark which means the tape meets the minimum requirements of the regulation. The reflective markings must be 'Class RA2' or 'microprismatic' (e.g. 3M Diamond Grade DG reflective sheeting) in the case of rear markings and 'high visibility fluorescent or non fluorescent yellow reflective' in the case of side markings. Red or yellow markings must be used for the rear of the vehicle, as close as practicable to the edge of the vehicle. Yellow or white markings may be used for the side of vehicles, covering at least 80 per cent of its length.

GBP 179.99
1

3M Conspicuity Markings 943-72 Red Ece Mark 50.8 mm x 50 M

3M Conspicuity Markings 943-72 Red Ece Mark 50.8 mm x 50 M

Fewer accidents mean less downtime, less contracts missed and savings on repair costsImprove corporate image through being more proactive about safetyProtect your company against potential legal action related to third party safetyPVC free product construction with solvent free adhesive technologyEasy to remove linerSuperior day and nighttime brightnessRetains reflectivity when totally wet by rain or when viewed at wide entrance anglesSuggested Applications

GBP 89.99
1

3M SFTW-202A Heat Shrink Tubing Red 38.0/19.0 mm 50 M Roll

3M SFTW-202A Heat Shrink Tubing Red 38.0/19.0 mm 50 M Roll

3M heat shrink tubing offers a reliable performance for electrical splices, connections, and terminations of up to 600V applications. This 3M Heat shrink tube is designed to be easy and quick to identify. The split resistant and flame retardant is used as a shrink fit for electrical insulation over cable terminations and splices. The 3M heat shrink is lightweight wire harness covering, wire marking, wire bundling, component packaging and fire-resistant covering. Features and Benefits These heat shrink tubes offers shrink-fit protection and strain relief against wires, terminals and connections and solder joints. Made from durable and flexible polyolefin Withstand temperatures of -55 to 135 degrees C. These heat shrink tubes offers flame-retardant rates for 600V applications Typical applications Suitable for a wide range of applications including lightweight wire-harness covering, wire marking, wire bundling and component packagingStandards K16/99085, IEC60684-2-212 type A tested, VDE certified and is RoHS 2011/65/EU Compliant UL Listed, BWB certificate K16/99085, IEC60684-2-212 type A tested, VDE certified

GBP 369.99
1

3M General Purpose Vinyl Tape 764i, Red, 50 mm x 33 m, 0.13 mm

3M General Purpose Vinyl Tape 764i, Red, 50 mm x 33 m, 0.13 mm

Suitable for all non-critical applications, including colour coding, bundling and safety marking, these non-corrosive, flexible vinyl tapes are ideal for protecting parts, equipment, and products from abrasions. Features and Benefits Maintains vivid colour over time for long-lasting quality Can be applied by hand or with a floor applicator Ideal for marking applications in light traffic areas Typical Applications Industrial use

GBP 5.19
1

3M Lane and Safety Marking Tape 471F, Red, 50 mm x 33 m, 0.14 mm

3M Lane and Safety Marking Tape 471F, Red, 50 mm x 33 m, 0.14 mm

3M Vinyl Tape 471 is commonly used for marking hazard areas and aisles. A cost effective alternative to paint, the vivid range of colours available are ideal for colour-coding and decorating in a range of settings. Features and Benefits Maintains vivid colour even when exposed to abrasion and solvents Rubber adhesive provides excellent holding strength on many surfaces Allows fast and easy application to a variety of surfaces Easy removal with no adhesive transfer makes cleanups efficient Available in many distinctive colours (yellow,red, white green, and blue) Typical Applications Marking aisles and corridors in a range of settings Highlighting safety hazards on walls, stairs, and pipes Masking for paint applications Surface protection

GBP 40.99
1

3M SFTW-202A Heat Shrink Tubing Poly Olefin Red 12.7/6.4 mm 50 M Roll

3M SFTW-202A Heat Shrink Tubing Poly Olefin Red 12.7/6.4 mm 50 M Roll

3M heat shrink tubing offers a reliable performance for electrical splices, connections, and terminations of up to 600V applications. This 3M Heat shrink tube is designed to be easy and quick to identify. The split resistant and flame retardant is used as a shrink fit for electrical insulation over cable terminations and splices. The 3M heat shrink is lightweight wire harness covering, wire marking, wire bundling, component packaging and fire-resistant covering. Features and Benefits These heat shrink tubes offers shrink-fit protection and strain relief against wires, terminals and connections and solder joints. Made from durable and flexible polyolefin Withstand temperatures of -55 to 135 degrees C. These heat shrink tubes offers flame-retardant rates for 600V applications Typical applications Suitable for a wide range of applications including lightweight wire-harness covering, wire marking, wire bundling and component packagingStandards K16/99085, IEC60684-2-212 type A tested, VDE certified and is RoHS 2011/65/EU Compliant UL Listed, BWB certificate K16/99085, IEC60684-2-212 type A tested, VDE certified

GBP 4.99
1

3M Circuit Plating Tape 1280 Red 50 8 mm x 65 8 M x 0 091 Mm

3M Circuit Plating Tape 1280 Red 50 8 mm x 65 8 M x 0 091 Mm

Low stretch polyester film for machine, as well as hand applicationSolvent clean up of the board is recommended to facilitate subsequent solderingPolyester backing reduces stretch and recovery of tape and associated uneven stop-off lineThick adhesive coating reduces undercutting because adhesive helps block out solutions between fingersPolyethylene tape core instead of cardboardSuggested ApplicationsUse for masking of many printed wiring boards during solder stripping and precious metal plating of fingersSplice silicone treated papers

GBP 63.99
1