249 resultater (0,21131 sekunder)

Vis alle filtre

Merke

Farge

Vis alle

Butikk

Pris (EUR)

Vis alle

Nullstill filter

Produkter
Fra
Butikker

Schneider Electric Zelio socket with push-in spring clamps for RXG relays with 2 contact sets - Komponenter for switchboxes og skap

Schneider Electric Zelio socket with push-in spring clamps for RXG relays with 2 contact sets - Komponenter for switchboxes og skap

Zelio RXG are a series of plug-in relays with a width of only 16 mm and robust faston connectors which is compatible with similar relays from other vendors. The relays are available with 1 C/O contact with 10A or 2 C/O contacts with 5A maximum load and it is possible to get them with or without lockable testbutton and status LED.A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.The sockets RGZExxxx has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RGZE08P is a socket with separate push-in terminals that fits with RXG relays with 2 C/O contacts.The socket has a width of 16 mm and protection modules can be inserted directly next to the supply terminals.The integrated holding clip protect the relay from falling out when inserted into the socket.The socket has push-in terminals for easy wiring without the use of any tool and optimum protection against vibrations.The RGZE08P fits all RXG2xxx plug-in relays with 2 C/O contacts.Additional marking of the socket can be done with the RSZL300 legend which is easily mounted on the sockets.Each terminal have room for 2 wires with a wire size between 0,5..1,5 mm2 and there is a integrated test point built into the socket.For connecting more than one socket to the same supply, the RSZS02 jumper is inserted next to the A2 terminal and it works across the ranges.The socket is marked with both NEMA and IEC markings.

NOK 112.00
1

Schneider Electric 2co separate terminalsocket with clamp - Komponenter for switchboxes og skap

Schneider Electric 2co separate terminalsocket with clamp - Komponenter for switchboxes og skap

Zelio RXG are a series of plug-in relays with a width of only 16 mm and robust faston connectors which is compatible with similar relays from other vendors. The relays are available with 1 C/O contact with 10A or 2 C/O contacts with 5A maximum load and it is possible to get them with or without lockable testbutton and status LED.A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.The sockets RGZE1S35M and RGZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RGZE1S48M is a socket with separate terminals that fits with RXG relays with 2 C/O contacts.The socket has a width of 16 mm and protection modules can be inserted directly next to the supply terminals.The integrated holding clip protect the relay from falling out when inserted into the socket.The RGZE1S48M fits all RXG2xxx plug-in relays with 2 C/O contacts.Additional marking of the socket can be done with the RSZL300 legend

NOK 108.00
1

Schneider Electric Harmony potentiometer complete with 10 kohm built-in xb4bd9 - Trykknapper Signalenheter

Schneider Electric Harmony potentiometer complete with 10 kohm built-in xb4bd9 - Trykknapper Signalenheter

Complete potentiometers for Harmony pushbuttons in metal or plastic.The potentiometers have an accurracy of +/- 10% with a linear resistance through the scale.It is made with Cermet technology which ensures a very high stability despite temperature changes.The new potentiometers are available in the following sizes:- 1 kOhm- 10 kOhm- 100 kOhm- 4,7 kOhm- 47 kOhm- 470 kOhmFor Altivar variable speed drives either 4,7 or 10 kOhm potentiometers are recommended

NOK 703.00
1

Schneider Electric Harmony potentiometer complete with 10 kohm built-in xb5ad9 - Trykknapper Signalenheter

Schneider Electric Harmony potentiometer complete with 10 kohm built-in xb5ad9 - Trykknapper Signalenheter

Complete potentiometers for Harmony pushbuttons in metal or plastic.The potentiometers have an accurracy of +/- 10% with a linear resistance through the scale.It is made with Cermet technology which ensures a very high stability despite temperature changes.The new potentiometers are available in the following sizes:- 1 kOhm- 10 kOhm- 100 kOhm- 4,7 kOhm- 47 kOhm- 470 kOhmFor Altivar variable speed drives either 4,7 or 10 kOhm potentiometers are recommended

NOK 854.00
1

Schneider Electric Zelio rsb plug-in relay premounted in socket with varistor and legend 1 c/o 12a contact and 230vac supply - Komponenter for

Schneider Electric Zelio rsb plug-in relay premounted in socket with varistor and legend 1 c/o 12a contact and 230vac supply - Komponenter for

Zelio RSB are a series of compact plug-in relays with a width of only 16 mm.The relays are available with 1 C/O with either 12 and 16A or 2 C/O contacts with 8A maximum load.It is possible to insert a protection module (diode, varistor or RC-circuit) into the relay socket if needed.The sockets RSZE1S35M and RSZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RSB1A120P7PV is a complete plug-in relay mounted into a RSZE1S35M socket with a maintaining clamp, which secure that the relay stays in the socket even in an environment with vibrations.The socket has a varistor interserted for protection against voltage spikes generated by coils in the panel.The varistor module has also a build-in LED for indication of supply to the relay.RSB1A120P7PV has a 1 C/O AgNI contact with a maximum load of 12A.The relay has a lifetime of 100.000 cycles (depending on load).Supply voltage to the RSB1A120P7PV is 230 VAC and average coil co

NOK 275.00
1

Schneider Electric Zelio rsb plug-in relay premounted in socket with varistor and legend 2 c/o 8a contacts and 230vac supply - Komponenter for

Schneider Electric Zelio rsb plug-in relay premounted in socket with varistor and legend 2 c/o 8a contacts and 230vac supply - Komponenter for

Zelio RSB are a series of compact plug-in relays with a width of only 16 mm.The relays are available with 1 C/O with either 12 and 16A or 2 C/O contacts with 8A maximum load.It is possible to insert a protection module (diode, varistor or RC-circuit) into the relay socket if needed.The sockets RSZE1S35M and RSZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RSB2A080P7PV is a complete plug-in relay mounted into a RSZE1S48M socket with a maintaining clamp, which secure that the relay stays in the socket even in an environment with vibrations.The socket has a varistor interserted for protection against voltage spikes generated by coils in the panel.The varistor module has also a build-in LED for indication of supply to the relay.RSB2A080P7PV has 2 C/O AgNI contacts with a maximum load of 8A.The relay has a lifetime of 100.000 cycles (depending on load).Supply voltage to the RSB2A080P7PV is 230 VAC and average coil cons

NOK 303.00
1

Schneider Electric Zelio rsb plug-in relay premounted in socket with varistor and legend 1 c/o 16a contact and 230vac supply - Komponenter for

Schneider Electric Zelio rsb plug-in relay premounted in socket with varistor and legend 1 c/o 16a contact and 230vac supply - Komponenter for

Zelio RSB are a series of compact plug-in relays with a width of only 16 mm.The relays are available with 1 C/O with either 12 and 16A or 2 C/O contacts with 8A maximum load.It is possible to insert a protection module (diode, varistor or RC-circuit) into the relay socket if needed.The sockets RSZE1S35M and RSZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RSB1A160P7PV is a complete plug-in relay mounted into a RSZE1S48M socket with a maintaining clamp, which secure that the relay stays in the socket even in an environment with vibrations.The socket has a varistor interserted for protection against voltage spikes generated by coils in the panel.The varistor module has also a build-in LED for indication of supply to the relay.RSB1A160P7PV has a 1 C/O AgNI contact with a maximum load of 16A.The relay has a lifetime of 100.000 cycles (depending on load).Supply voltage to the RSB1A160P7PV is 230 VAC and average coil co

NOK 363.00
1

Schneider Electric Zelio rsb plug-in relay premounted in socket with diode and legend 1 c/o 12a contact and 24vdc supply - Komponenter for switchboxes

Schneider Electric Zelio rsb plug-in relay premounted in socket with diode and legend 1 c/o 12a contact and 24vdc supply - Komponenter for switchboxes

Zelio RSB are a series of compact plug-in relays with a width of only 16 mm.The relays are available with 1 C/O with either 12 and 16A or 2 C/O contacts with 8A maximum load.It is possible to insert a protection module (diode, varistor or RC-circuit) into the relay socket if needed.The sockets RSZE1S35M and RSZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RSB1A120BDPV is a complete plug-in relay mounted into a RSZE1S35M socket with a maintaining clamp, which secure that the relay stays in the socket even in an environment with vibrations.The socket has a blocking diode for protection against reversed polarity.The diode module has also a build-in LED for indication of supply to the relay.RSB1A120BDPV has a 1 C/O AgNI contact with a maximum load of 12A.The relay has a lifetime of 100.000 cycles (depending on load).Supply voltage to the RSB1A120BDPV is 24 VDC and average coil consumption is 0,45W.Minimum switching c

NOK 234.00
1

Schneider Electric Zelio rsb plug-in relay premounted in socket with diode and legend 2 c/o 8a contacts and 12vdc supply - Komponenter for switchboxes

Schneider Electric Zelio rsb plug-in relay premounted in socket with diode and legend 2 c/o 8a contacts and 12vdc supply - Komponenter for switchboxes

Zelio RSB are a series of compact plug-in relays with a width of only 16 mm.The relays are available with 1 C/O with either 12 and 16A or 2 C/O contacts with 8A maximum load.It is possible to insert a protection module (diode, varistor or RC-circuit) into the relay socket if needed.The sockets RSZE1S35M and RSZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RSB2A080JDPV is a complete plug-in relay mounted into a RSZE1S48M socket with a maintaining clamp, which secure that the relay stays in the socket even in an environment with vibrations.The socket has a blocking diode for protection against reversed polarity.The diode module has also a build-in LED for indication of supply to the relay.RSB2A080JDPV has 2 C/O AgNI contact with a maximum load of 8A.The relay has a lifetime of 100.000 cycles (depending on load).Supply voltage to the RSB2A080JDPV is 12 VDC and average coil consumption is 0,45W.Minimum switching curr

NOK 559.00
1

Schneider Electric Zelio rsb plug-in relay premounted in socket with diode and legend 1 c/o 16a contact and 24vdc supply - Komponenter for switchboxes

Schneider Electric Zelio rsb plug-in relay premounted in socket with diode and legend 1 c/o 16a contact and 24vdc supply - Komponenter for switchboxes

Zelio RSB are a series of compact plug-in relays with a width of only 16 mm.The relays are available with 1 C/O with either 12 and 16A or 2 C/O contacts with 8A maximum load.It is possible to insert a protection module (diode, varistor or RC-circuit) into the relay socket if needed.The sockets RSZE1S35M and RSZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RSB1A160BDPV is a complete plug-in relay mounted into a RSZE1S48M socket with a maintaining clamp, which secure that the relay stays in the socket even in an environment with vibrations.The socket has a blocking diode for protection against reversed polarity.The diode module has also a build-in LED for indication of supply to the relay.RSB1A160BDPV has a 1 C/O AgNI contact with a maximum load of 16A.The relay has a lifetime of 100.000 cycles (depending on load).Supply voltage to the RSB1A160BDPV is 24 VDC and average coil consumption is 0,45W.Minimum switching c

NOK 307.00
1

Schneider Electric Zelio rsb plug-in relay premounted in socket with diode and legend 2 c/o 8a contacts and 24vdc supply - Komponenter for switchboxes

Schneider Electric Zelio rsb plug-in relay premounted in socket with diode and legend 2 c/o 8a contacts and 24vdc supply - Komponenter for switchboxes

Zelio RSB are a series of compact plug-in relays with a width of only 16 mm.The relays are available with 1 C/O with either 12 and 16A or 2 C/O contacts with 8A maximum load.It is possible to insert a protection module (diode, varistor or RC-circuit) into the relay socket if needed.The sockets RSZE1S35M and RSZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RSB2A080BDPV is a complete plug-in relay mounted into a RSZE1S48M socket with a maintaining clamp, which secure that the relay stays in the socket even in an environment with vibrations.The socket has a blocking diode for protection against reversed polarity.The diode module has also a build-in LED for indication of supply to the relay.RSB2A080BDPV has 2 C/O AgNI contact with a maximum load of 8A.The relay has a lifetime of 100.000 cycles (depending on load).Supply voltage to the RSB2A080BDPV is 24 VDC and average coil consumption is 0,45W.Minimum switching curr

NOK 251.00
1

Schneider Electric Socket with screw terminals 12-24v ac/dc - Komponenter for switchboxes og skap

Schneider Electric Socket with screw terminals 12-24v ac/dc - Komponenter for switchboxes og skap

Zelio RSL Slim relays are the most compact socket relays in the Zelio range.With a width of only 6,2 mm. it saves valuable space on the DIN-rail of a panel.The RSL relays are available as either as a complete unit or as a separate relay and socket.The build-in protection circuit protects against reversed polarity and power surges from other equipment in the panel.A green LED on the front indicates if the there is supply to the relay.The RSLZVA1 socket fits the RSL1AB4JD, RSL1AB4BD, RSL1GB4JD and RSL1GB4BD relays.Supply voltage can be either 12V AC/DC or 24V AC/DCThe socket has screw terminals for wires between 0,2..2,5 mm in core diameter.It is possible to connect up to 20 pcs. RSLZVA1 sockets with the RSLZ2 jumper.Marking of the socket can be done with the RSLZ5 legend.

NOK 168.00
1

Schneider Electric Digital time switch with weekly program - Komponenter for switchboxes og skap

Schneider Electric Digital time switch with weekly program - Komponenter for switchboxes og skap

Digital time switch with weekly program. Programming is carried out on the device. Brief instructions in the storage compartment For installation on TH35 DIN rails as per EN 60715Functions: 56 memory locations ON/OFF switching times Switch preselection ON/OFF permanent switching Manual switching Holiday program Toggling summer time/winter time: -automatic, can be deactivated, toggle rules for Europe,USA and other countries are already saved, customised toggle rules or toggling on a fixeddate can be selected PIN codingNominal voltage:230 AC, -15%/+10%, 50/60 HzMax. switching capacity:16 A, 250 V AC, cos phi=1,10 A, 250 V AC, cos phi=0.6Min. switching capacity:10 mA, 230 V AC,100 mA, 24 V AC/DCContact: Dry contactStandby power: 2 W: 200 WShortest switching time: 1 sConnections: Screw terminals, rigid/flexible 2x0.5 - 2.5 mm2, with end sleeve max.1x2.5 mm2Operating elements: 4 buttons for menu navigationAccuracy: 0.25 s/day (25 °C)Power reserve: 10 yearsIP protection rating: IP 20Insulation class: Class IIOvervoltage category: Class IIIAmbient temperature: -30 °C to +55 °CTransportation temperature: -30 °C to +70 °CStorage temperature: -30 °C to +70 °COperating humidity: 90% RH, no condensingTransportation humidity: 90% RH, no condensingStorage humidity: 90% RH, no condensingWeight: 114g (CCT15440 & CCT15441), 130g (CCT15442 & CCT15443)Dimension: 92.6 x 45 x 66.7 mm (Length x Width x Height)Device width: approx. 45 mm

NOK 1278.00
1

Schneider Electric Enclosure terminal block - Switchboxes og skap

Schneider Electric Enclosure terminal block - Switchboxes og skap

Cover terminal block 3x6/25 + 21x1,5/4, extra accessory for Pragma covers for terminal clamps, green Product description: Cover terminal block 3x6/25 + 21x1,5/4, extra accessory for Pragma covers for terminal clamps. The entire Pragma range is designed for small and medium sized installations, such as distribution boards or floor switchboards from 63A up to 160A. Surface or flush mounting of panel covers in the large range consists of 13, 18 or 24 module width panels with 1 to 6 rows and 1 to 3 rows of interface panels. The whole range can be associated/mounted horizontally or vertically. Easy installation and large cable routing area The cover shapes are rounded and are manta and user friendly. Easy installation: covers with ample space on the side and between DIN rails, individual boards adapted to multiposition rails, removable frame, customization with quick-connect terminal blocks, board assembly and installation has never been so simple. Panel combinations can be made horizontally and vertically. Robustness of components: Pragma covers are designed for long installation time and durability. Components in specific Schneider Electric Technoplastic for the whole range, metal parts for the larger 24 module covers, double-hung door, ensure maximum solidity for a long time. Modern design, styling and maintenance, successful integration in small, medium and large buildings as well as service sector, transparent plastic in the door of the cover with the possibility of customization and new finishes: Opal/white or transparent glass pane, titanium, white or metallic grey frame. It can also be customized for the end customer: company logo, artistic illustration and more...

NOK 269.00
1

Schneider Electric Digital time switch with weekly program - Komponenter for switchboxes og skap

Schneider Electric Digital time switch with weekly program - Komponenter for switchboxes og skap

Digital time switch with weekly program. Programming is carried out on the device or using the smartphone app Acti9 Light andTime Switch via Bluetooth stick. The Bluetooth stick is also used as a memory stick Programming can also be carried out on a PC using the CCT15860 programming kit External input per channel as extension unit Brief instructions in the storage compartment For installation on TH35 DIN rails as per EN 60715Functions: 84 memory locations Memory stick ON/OFF switching times Impulse program Cycle program Switch preselection Holiday program Integrated operating hours counter (reset option, service function for monitoring maintenanceintervals) 2 random programs Display lighting (can be switched off) Toggling summer time/winter time: -automatic, can be deactivated, toggle rules for Europe,USA and other countries are already saved, customised toggle rules or toggling on a fixeddate can be selected PIN coding

NOK 1983.00
1

Schneider Electric Logic style socket separated termination - Komponenter for switchboxes og skap

Schneider Electric Logic style socket separated termination - Komponenter for switchboxes og skap

Zelio RXM are a series of industrial plug-in relays, designed for both simple and complex automation systems.The relays are available with 2 C/O (12A), 3 C/O (10A) or 4 C/O (6A) contacts and it is possible to get them with lockable testbutton and status LED.A special 4 C/O version with gold plated contacts for low energy switching is also available.A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.The sockets are availble with either mixed terminals or with seperate terminals depending on the prefered solution.RXZE2S111M is a relay socket for mounting on a DIN-rail with separate terminals and compatible with RXM plug-in relays with 3 C/O contacts.In the bottom of the socket are the terminals for the coil supply and in the top are all the terminals for the contacts.The width of the socket are 27 mm and it is possible to insert protection modules next to the supply terminals.The socket comes without a maintaining clamp but the RXZR335

NOK 97.00
1