83 Resultaten (0,66196 seconden)

Toon alle filters

Merk

Verkoper

Prijs (EUR)

Toon alles

Reset filter

Producten
Van
Winkels

Danfoss Icon Master Controller OTA 24V with 10 channels - 088U1141

Danfoss Icon Master Controller OTA 24V with 10 channels - 088U1141

Danfoss Icon Master Controller 24V with 10 channels. Underfloor heating control for the Danfoss Icon series with 10 outputs for thermal actuators. Up to 10 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

EUR 304.01
1

Danfoss Icon Master Controller OTA 24v with 15 channels - 088U1142

Danfoss Icon Master Controller OTA 24v with 15 channels - 088U1142

Danfoss Icon Master Controller 24V with 15 channels. Underfloor heating control for the Danfoss Icon series with 15 outputs for thermal actuators. Up to 15 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

EUR 278.01
1

Danfoss floor heating manifold 12+12 SSM with flowmeter - 088U0762

Danfoss floor heating manifold 12+12 SSM with flowmeter - 088U0762

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

EUR 692.22
1

Danfoss floor heating manifold 11+11 SSM with flowmeter - 088U0761

Danfoss floor heating manifold 11+11 SSM with flowmeter - 088U0761

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

EUR 638.24
1

Danfoss ab-qm 4.0 balancing and control valve dn15 hf with outside thread - 003Z8202

Danfoss ab-qm 4.0 balancing and control valve dn15 hf with outside thread - 003Z8202

Danfoss AB-QM is a Pressure Independent Control Valve (PICV) that combines high accuracy with market-leading ease of use. AB-QM's design is fully geared to ensure that your projects meet your schedule and budget, while providing the most efficient HVAC system. Pressure-independent valves are control valves that have an automatic balancing function. A built-in pressure regulator maintains a constant differential pressure across the control valve, ensuring full authority and automatic flow limitation. By combining two functions in one, regulation and automatic water balance, PICVs from Danfoss offer a cost-effective solution to the challenges that far-sighted designers of HVAC systems face.

EUR 175.41
1