mcb.dk | Få success online

Rota-Tip straight 12.7 mm diameter

Solid Carbide replaceable blades. Tool body remains in place when changing blades, thus reducing down-time. Straight cutters have blades with two or four cutting edges, allowing them to be rotated and locked in identical positions. 1/2 inch shank tools are ideal for use in production applications. Clear economical advantage over conventional brazed tip tooling. The single blade can be rotated 180 degrees to give double the life of a conventional tool. Refs. RT

EUR 99.34

1

Rota-Tip straight 12.7 mm diameter

Solid Carbide replaceable blades. Tool body remains in place when changing blades, thus reducing down-time. Straight cutters have blades with two or four cutting edges, allowing them to be rotated and locked in identical positions. 1/2 inch shank tools are ideal for use in production applications. Clear economical advantage over conventional brazed tip tooling. The single blade can be rotated 180 degrees to give double the life of a conventional tool. Ideally

EUR 111.80

1

Trimming Cutter 15.9 mm diameter

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. A 3mm approximate overlap should be left before copy profiling. When using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.

EUR 35.60

1

Trimming cutter 9.5 mm diameter

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter.

EUR 33.11

1

Two flute cutter 10 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

EUR 33.47

1

Two flute cutter 2 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

EUR 31.33

1

Two flute cutter 5 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

EUR 31.33

1

Two flute cutter 10 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

EUR 44.10

1

Two flute cutter 18 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip.

EUR 71.21

1

Two flute cutter 12.7 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Ideal for cutting kitchen worktops.

EUR 57.67

1

Two flute cutter 8 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

EUR 33.11

1

Two flute cutter 6.3 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

EUR 29.20

1

Two flute cutter 12.7 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

EUR 33.61

1

Two flute cutter 6 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

EUR 37.32

1

Two flute cutter 6.3 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

EUR 32.04

1

Two flute cutter 12.7 mm diameter

TCT extra long cutter. Two flutes give a clean finish to cut edges. Use only on professional routers with 80mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into base.

EUR 43.58

1

Two flute cutter 12 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

EUR 33.47

1

Two flute cutter 9 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

EUR 34.88

2

Two flute cutter 25 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip.

EUR 56.26

1

Two flute cutter 12.7 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Short shank for Makita 3600B and 3612BR, Ryobi and Hitachi routers. Ideal for cutting kitchen worktops.

EUR 46.85

1

Two flute cutter 12 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

EUR 36.98

1

Two flute cutter 22 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip.

EUR 39.88

1

Two flute cutter 6 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

EUR 32.30

1

Two flute cutter 9 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

EUR 33.11

1

Two flute cutter 18 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip.

EUR 50.41

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)

Rota-Tip straight 12.7 mm diameter

Rota-Tip straight 12.7 mm diameter

Trimming Cutter 15.9 mm diameter

Trimming cutter 9.5 mm diameter

Two flute cutter 10 mm diameter

Two flute cutter 2 mm diameter

Two flute cutter 5 mm diameter

Two flute cutter 10 mm diameter

Two flute cutter 18 mm diameter

Two flute cutter 12.7 mm diameter

Two flute cutter 8 mm diameter

Two flute cutter 6.3 mm diameter

Two flute cutter 12.7 mm diameter

Two flute cutter 6 mm diameter

Two flute cutter 6.3 mm diameter

Two flute cutter 12.7 mm diameter

Two flute cutter 12 mm diameter

Two flute cutter 9 mm diameter

Two flute cutter 25 mm diameter

Two flute cutter 12.7 mm diameter

Two flute cutter 12 mm diameter

Two flute cutter 22 mm diameter

Two flute cutter 6 mm diameter

Two flute cutter 9 mm diameter

Two flute cutter 18 mm diameter

Powered by Cobiro