mcb.dk | Få success online

Sealey API11 Shelf for APIBP1500

Single shelf that can be positioned at various heights on back panel. Compatible with APIBP1500. Width: 1440mm.

EUR 76.94

1

Sealey API13 Shelf for APIBP2100

Single shelf that can be positioned at various heights on back panel. Compatible with Model No. APIPB2100 Back Panel Assembly. Width: 2040mm.

EUR 96.94

1

Sealey API12 Shelf for APIBP1800

Single shelf that can be positioned at various heights on back panel. Compatible with Model No. APIPB1800 Back Panel Assembly. Width: 1720mm.

EUR 84.88

1

Sealey AP24ACC2 Side Shelf & Roll Holder for AP24 Series Tool Chests

Easy fix shelf with raised edge and paper roll holder. Ideal for small components, helping to prevent the loss of parts and keeping work area tidy. Roll holder underneath shelf for easy-access to paper when required. For paper roll see page 1320.

EUR 63.00

1

Sealey RE97XCKIT Specialist Push & Pull Ram Set

Comprehensive set of mini, midi and maxi sized push and pull rams. Suitable for many applications including workshop, agricultural, industrial and construction where lifting, pushing, positioning, bending and holding of heavy loads may be required. Supplied in steel storage case.Use in conjunction with Hydraulic Pump and Hose (not included) from RE83 and RE97 Series Body Repair Kits, see XXX page. Set features:• High flow quick connecting couplers with dust caps on all components.• Unique ram and cylinder bearings absorb eccentric load stresses in order to protect the cylinder against abrasion, over-extension and jamming.• Chromed rams with polyurethane seals and wipers provide longer service life.• Selected rams fitted with heavy-duty return spring.

EUR 710.20

1

Sealey OFCA50 Adaptor for Oil Filter Crusher Ø50 x 115mm

Adaptors allow OFC1 to be used with a wide range of bench and floor presses having Ø50mm or Ø60mm rams.

EUR 18.13

1

Sealey OFC1 Oil Filter Crushing Unit

Used in conjunction with a press, this unit crushes filters up to Ø115mm and removes most of the oil and sludge, which drains into a suitable container (not included). Crushing filters minimizes the cost of disposal of hazardous waste by volume. Supplied with ram extension to allow 2-stage crushing of large filters without repositioning press table. Suitable for Ø38mm(1.5") press rams. Optional adaptors enable use with Ø50mm and Ø60mm rams.

EUR 188.64

1

Sealey API5659 Mobile Industrial Cabinet 1 Shelf Locker

Industrial quality single shelf cabinet suitable for storing larger items. Fitted with a safety locking catch to prevent inadvertent opening. Fits perfectly underneath workbenches in this range. Features four Ø60mm wheels, two locking castors and two fixed to allow unit to be taken to the work area. Fitted high quality lock with two coded keys.

EUR 478.57

1

Sealey AP6150GS Racking Unit 5 Shelf 150kg Capacity Per Level

Galvanized steel frame with five MDF shelves. 150kg Capacity per level giving a maximum capacity of 750kg per rack. No nuts and bolts for easy assembly. Clips together in minutes. 2-Piece uprights allow use as a single bay rack or split into two separate shelf systems or workstations.

EUR 89.80

1

Sealey AP6350GS Racking Unit 5 Shelf 350kg Capacity Per Level

Galvanized steel frame with five MDF shelves. 350kg Capacity per level giving a maximum capacity of 1750kg per rack. No nuts and bolts for easy assembly. Clips together in minutes. 2-Piece uprights allow use as a single bay rack or split into two separate shelf systems or workstations.

EUR 131.10

1

Sealey SC02 Floor Cabinet 4 Shelf plus Hanging Rail 2 Door

Featuring two large doors, three half shelves, one full shelf, clothes hanger and divided base storage. Added security provided by cylinder lock, supplied with two keys. All steel construction, stabilized by an inner cross member. Supplied flat-packed to save freight cost, simple assembly required.

EUR 520.40

1

Sealey API1103B Industrial Cabinet/Workstation 5 Drawer & 1 Shelf Locker

Industrial quality five drawer and single shelf, freestanding locker cabinet. All drawers run on heavy-duty drawer slides with load bearing of up to 100kg. Each drawer fitted with fixed dividers running front to back and supplied with cross dividers for personalized storage layout. Fitted with two high quality locks and supplied with four coded keys.

EUR 1450.00

1

Sealey APICCOMBO1 Industrial Mobile Storage System with Shelf

Industrial quality mobile storage system for use in the garage or workshop environment. Supplied with six panels; three louvred panels, to accept storage bins, and three perforated panels which can be used with Sealey TTS Series clips for tool storage. These can be mounted in any configuration, allowing the user to customise the design to suit their needs. It also includes a single shelf, which can be mounted at various heights. Four heavy-duty castors, of which two are fitted with toe locks, give smooth manoeuvrability around the workplace.

EUR 714.95

1

Sealey API1103A Industrial Mobile Workstation 5 Drawer & 1 Shelf Locker

Industrial quality five drawer and single shelf, mobile locker cabinet. Perforated rear panel ideal for hanging frequently used tools so they are at hand when needed. All drawers run on heavy-duty drawer slides with load bearing of up to 100kg. Each drawer fitted with fixed dividers running front to back and then supplied with cross dividers for personalised storage layout. Fitted with four Ø60mm wheels two locking castors and two fixed to allow unit to be taken to the work area. Fitted with two high quality locks and supplied with four coded keys.

EUR 1650.00

1

Sealey RE97XS05 Push Ram - Short 5tonne

Extremely short closed height makes these rams suitable for use where there is almost no clearance at the lift point. Suitable for use with Sealey Hydraulic Repair Kits and other brands. High flow quick connecting coupler with dust cap. Unique ram and cylinder bearings absorb eccentric load stresses in order to protect the cylinder against abrasion, over-extension and jamming. Chromed ram with polyurethane seals and wipers provide longer service life.

EUR 83.60

1

Sealey CX104 Trolley 2-Level Heavy-Duty with Lockable Top

Garage or workshop trolley with an 80kg capacity per shelf. Upper shelf has liner and lockable top, lower shelf may be installed base down or base up to give either tool and component security or unobstructed access. Fitted with four wheels, two fixed and two locking castors.

EUR 213.70

1

Sealey CX1042D Trolley 2-Level Heavy-Duty with Lockable Top & 2 Drawers

Garage or workshop trolley with an 80kg capacity per shelf. Upper shelf has liner and lockable top, lower shelf may be installed base down or base up to give either tool and component security or unobstructed access. Two lockable drawers with ball bearing slides and liners, give additional tool security. Four large castors, two fitted with a brake.

EUR 421.00

1

Sealey APRB1152 Cross Beam 1150mm - Pair 900kg Capacity

Designed to take a chipboard shelf.

EUR 81.00

1

Sealey AP12600 Workstation 1.2m with Drawers

Boltless designed frame makes the unit easy to assemble, with minimal tools being required. Pegboard rear panel with hooks for convenient tool storage. Two half drawers, with ball-bearing slides, full size shelf below MDF worktop and 230mm shelf above pegboard.

EUR 315.00

1

Sealey CX308 Workshop Trolley 3-Level

Composite garage workshop trolley with a 30kg capacity per shelf. Walls on only three sides of shelf allow easy-access when adding or removing items to and from trolley. Four large castors, two locking. Can also be used as a janitorial trolley.

EUR 116.00

1

Sealey SM19 Parts Cleaning Tank

Heavy-duty one-piece tank. Fully sealed electric motor with magnetic drive pump unit. Lid features self-latching fusible link which automatically snaps lid shut in the event of a fire. Includes removable shelf and small parts basket. Flexible metal nozzle directs solvent over work. Supplied with workshop stand with integral storage shelf.

EUR 268.23

1

Sealey CX314 Folding Workshop Trolley 3-Level

Folding composite garage workshop trolley with a 25kg capacity per shelf. Walls on all four sides to stop items from sliding off the trolley. Four large castors, two locking. Can also be used as a janitorial trolley. Folds up in seconds for easy storage when not in use. Shelf Size: 595 x 370mm (W x D).

EUR 126.00

1

Sealey CX313 Workshop Trolley 3-Level Composite with Parts Storage

Composite garage workshop trolley featuring aluminium corner posts with a 30kg capacity per shelf. Each shelf features three compartments with removable dividers, seven tool holder slots, four additional compartments for small fixings and two cup/can holders. These features allow for all of your tools and equipment to be on-hand and easily accessed. Quick and easy to assemble, with four swivel castors, two featuring brakes.

EUR 135.00

1

Sealey API2103 Industrial 3-Level Workshop Trolley

Industrial quality workshop trolley, ideal for use in any garage or workshop environment. Two deep-walled shelves give tool and component security. Adjustable legs on trolley allow the user to set at their desired height. Worktop is installed by placing the top shelf base up, creating a sturdy work surface. Optionally, install the top shelf base down to allow extra storage. Features four swivel castors, two of which have toe locks.

EUR 383.20

1

Sealey AP1520 Woodworking Bench 1.52m

Made from birchwood with a varnished finish. Features tool well, shelf, tool drawer, front and end vices, four metal bench stops and four wooden board jacks.

EUR 272.16

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)