32 results (0,17682 seconds)

Show all filters

Brand

Show all

Colour

Show all

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

3M Scotch Low Adhesion Masking Tape 1104, Beige, 24 mm x 50 m

3M Scotch Low Adhesion Masking Tape 1104, Beige, 24 mm x 50 m

Specially formulated low tack adhesive properties. Reliable paint masking, especially for eg pre-painted or 2-tone projects. Less aggressive bond ideal for delicate surfaces. Perfect for lacquered or coated surfaces. Use for masking anodised metals or high-energy surfaces. Particularly repositionable. Features and Benefits Low-tack adhesive ensures easy repositioning Perfect for two-tone paint projects Ideal for delicate surfaces

GBP 2.79
1

Everbuild Industrial Superglue GP 2 0GM

Everbuild Industrial Superglue GP 2 0GM

Medium viscosity formula fills gaps to 0.1mm. Perfect for use on surfaces where a fast set is required. Bonds non porous surfaces eg. most plastics, metals, glass, PVCu, rubber and EPDM. Features and Benefits Medium viscosity, industrial grade superglue Ideal for use on surfaces where fast set is required, industrial grade superglue will fill gaps up to 0.1mm and will bond non porous surfaces such as plastic and metal Notes Viscosity at 25c - 100cps. Set time 5 to 15 seconds

GBP 1.49
1

Parweld 2.4mm A32 Mild Steel TIG Rods 5kg

Parweld 2.4mm A32 Mild Steel TIG Rods 5kg

KEY FEATURES TIG/GTAW rod for high temperature creep resistant 1.25%Cr-0.5%Mo ferritic steel. These steels are used for creep resisting applications up to ~550C. Typical applications in power generation plant include steam piping, turbines and boilers; the alloy also finds applications in the chemical and petro-chemical industries. The wire has low levels of tramp elements (eg. Sn, As, Sb & P) providing a low Bruscato (X) Factor for temper embrittlement resistant applications. STANDARDS EN ISO 21952-B: W55 1CM A5.28: ER80S-B5

GBP 0.00
1

Parweld 1.0mm A32 Mild Steel TIG Rods 5kg

Parweld 1.0mm A32 Mild Steel TIG Rods 5kg

KEY FEATURES TIG/GTAW rod for high temperature creep resistant 1.25%Cr-0.5%Mo ferritic steel. These steels are used for creep resisting applications up to ~550C. Typical applications in power generation plant include steam piping, turbines and boilers; the alloy also finds applications in the chemical and petro-chemical industries. The wire has low levels of tramp elements (eg. Sn, As, Sb & P) providing a low Bruscato (X) Factor for temper embrittlement resistant applications. STANDARDS EN ISO 21952-B: W55 1CM A5.28: ER80S-B2

GBP 0.00
1

Parweld 1.6mm A33 Mild Steel TIG Rods 5kg

Parweld 1.6mm A33 Mild Steel TIG Rods 5kg

KEY FEATURES TIG/GTAW rod for high temperature creep resistant 2.25%Cr-1%Mo ferritic steel. These steels are used for creep resisting applications up to 600C. Typical applications in power generation plant include steam piping, turbines and boilers; the alloy also finds applications in the chemical and petro-chemical industries. The wire has low levels of tramp elements (eg. Sn, As, Sb & P) providing a low Bruscato (X) Factor for temper embrittlement resistant aqpplications. STANDARDS EN ISO 21952-B: W62 2C1M AWS A5.28: ER90S-B5

GBP 0.00
1

Parweld 1.2mm A32 Mild Steel TIG Rods 5kg

Parweld 1.2mm A32 Mild Steel TIG Rods 5kg

KEY FEATURES TIG/GTAW rod for high temperature creep resistant 1.25%Cr-0.5%Mo ferritic steel. These steels are used for creep resisting applications up to ~550C. Typical applications in power generation plant include steam piping, turbines and boilers; the alloy also finds applications in the chemical and petro-chemical industries. The wire has low levels of tramp elements (eg. Sn, As, Sb & P) providing a low Bruscato (X) Factor for temper embrittlement resistant applications. STANDARDS EN ISO 21952-B: W55 1CM A5.28: ER80S-B3

GBP 0.00
1

Parweld 3.0mm A32 Mild Steel TIG Rods 5kg

Parweld 3.0mm A32 Mild Steel TIG Rods 5kg

KEY FEATURES TIG/GTAW rod for high temperature creep resistant 1.25%Cr-0.5%Mo ferritic steel. These steels are used for creep resisting applications up to ~550C. Typical applications in power generation plant include steam piping, turbines and boilers; the alloy also finds applications in the chemical and petro-chemical industries. The wire has low levels of tramp elements (eg. Sn, As, Sb & P) providing a low Bruscato (X) Factor for temper embrittlement resistant applications. STANDARDS EN ISO 21952-B: W55 1CM A5.28: ER80S-B6

GBP 0.00
1

Parweld 3.2mm A33 Mild Steel TIG Rods 5kg

Parweld 3.2mm A33 Mild Steel TIG Rods 5kg

KEY FEATURES TIG/GTAW rod for high temperature creep resistant 2.25%Cr-1%Mo ferritic steel. These steels are used for creep resisting applications up to 600C. Typical applications in power generation plant include steam piping, turbines and boilers; the alloy also finds applications in the chemical and petro-chemical industries. The wire has low levels of tramp elements (eg. Sn, As, Sb & P) providing a low Bruscato (X) Factor for temper embrittlement resistant aqpplications. STANDARDS EN ISO 21952-B: W62 2C1M AWS A5.28: ER90S-B7

GBP 0.00
1

Parweld 2.4mm A33 Mild Steel TIG Rods 5kg

Parweld 2.4mm A33 Mild Steel TIG Rods 5kg

KEY FEATURES TIG/GTAW rod for high temperature creep resistant 2.25%Cr-1%Mo ferritic steel. These steels are used for creep resisting applications up to 600C. Typical applications in power generation plant include steam piping, turbines and boilers; the alloy also finds applications in the chemical and petro-chemical industries. The wire has low levels of tramp elements (eg. Sn, As, Sb & P) providing a low Bruscato (X) Factor for temper embrittlement resistant aqpplications. STANDARDS EN ISO 21952-B: W62 2C1M AWS A5.28: ER90S-B6

GBP 0.00
1

Parweld 1.6mm A32 Mild Steel TIG Rods 5kg

Parweld 1.6mm A32 Mild Steel TIG Rods 5kg

KEY FEATURES TIG/GTAW rod for high temperature creep resistant 1.25%Cr-0.5%Mo ferritic steel. These steels are used for creep resisting applications up to ~550C. Typical applications in power generation plant include steam piping, turbines and boilers; the alloy also finds applications in the chemical and petro-chemical industries. The wire has low levels of tramp elements (eg. Sn, As, Sb & P) providing a low Bruscato (X) Factor for temper embrittlement resistant applications. STANDARDS EN ISO 21952-B: W55 1CM A5.28: ER80S-B4

GBP 0.00
1

Deb Swarfega Original 4.5 Litre Jar 4 x 4.5 Litre

Deb Swarfega Original 4.5 Litre Jar 4 x 4.5 Litre

The Swarfega Rapid Hand Cleaner 'Original' contains the original green gel and quickly removes ingrained oil, grease and many oil based paints . Features & benefits of Swarfega Rapid Hand Cleaner 'Original' Added conditioner with a new fresh order Leaves hands feeling smooth and fresh Original green gel rapid hand cleaner Quickly removes ingrained oil, grease and many oil based paints Can also be used to clean up oil and grease marks on surfaces eg carpets, upholstery and clothing Locations of use: Heavy Industrial General & Light Industrial Vehicle Maintenance/Repair

GBP 0.00
1

Parweld HF600 MIG Wire 0.8MM

Parweld HF600 MIG Wire 0.8MM

KEY FEATURES MIG/GMAW wire for hardfacing applications. The wire is predominantly used for applications requiring good abrasion resisitance such as mixers, crushers and earth moving equipment but deposits will withstand moderate impact. With final deposit hardness being nominally 60HRC the weld metal can only be ground. If very thick build-ups are required it is suggested that lower hardness wires (eg. ED-A 35) be used as a buffer layer. STANDARDS EN ISO 14700: S Fe8 AWS A5.21: ERFe3 Note: Image is for illustrative purposes only and may differ from the actual product

GBP 0.00
1

Parweld HF600 MIG Wire 1.0MM

Parweld HF600 MIG Wire 1.0MM

KEY FEATURES MIG/GMAW wire for hardfacing applications. The wire is predominantly used for applications requiring good abrasion resisitance such as mixers, crushers and earth moving equipment but deposits will withstand moderate impact. With final deposit hardness being nominally 60HRC the weld metal can only be ground. If very thick build-ups are required it is suggested that lower hardness wires (eg. ED-A 35) be used as a buffer layer. STANDARDS EN ISO 14700: S Fe8 AWS A5.21: ERFe4 Note: Image is for illustrative purposes only and may differ from the actual product

GBP 0.00
1

Parweld HF600 MIG Wire 1.2MM

Parweld HF600 MIG Wire 1.2MM

KEY FEATURES MIG/GMAW wire for hardfacing applications. The wire is predominantly used for applications requiring good abrasion resisitance such as mixers, crushers and earth moving equipment but deposits will withstand moderate impact. With final deposit hardness being nominally 60HRC the weld metal can only be ground. If very thick build-ups are required it is suggested that lower hardness wires (eg. ED-A 35) be used as a buffer layer. STANDARDS EN ISO 14700: S Fe8 AWS A5.21: ERFe5 Note: Image is for illustrative purposes only and may differ from the actual product

GBP 0.00
1

Parweld HF600 MIG Wire 1.6MM

Parweld HF600 MIG Wire 1.6MM

KEY FEATURES MIG/GMAW wire for hardfacing applications. The wire is predominantly used for applications requiring good abrasion resisitance such as mixers, crushers and earth moving equipment but deposits will withstand moderate impact. With final deposit hardness being nominally 60HRC the weld metal can only be ground. If very thick build-ups are required it is suggested that lower hardness wires (eg. ED-A 35) be used as a buffer layer. STANDARDS EN ISO 14700: S Fe8 AWS A5.21: ERFe6 Note: Image is for illustrative purposes only and may differ from the actual product

GBP 0.00
1

Imex Ripper RB01 Longhorn Adjustable Head Wrecking Bar

Imex Ripper RB01 Longhorn Adjustable Head Wrecking Bar

Ripper RB01 Longhorn Adjustable Head Wrecking Bar The Longhorn is a heavy-duty demolition bar with 180-degree indexing head for multiple demolition and rip out uses. The indexing head gives it unique benefits over standard deck lifters/demolition bars. With 15 lock positions that enable the user to select the best position for maximum leverage and access. Sharp, pointed forks on the head for piercing materials and driving between gaps (eg. decking). Nail puller also on the head for removing nails and screws. Suited to many applications: removing tiles, skirting, architraves, taking up flooring, pulling out nails etc. Features: Heavy-duty, steel tubular, 1.1m handle for maximum leverage, long life and durability 15 lock positions Sharp, pointed forks Nail puller on the head Specification: Total length: 1140mm Head width: 120mm Space between forks: 75mm

GBP 0.00
1

Self Write EAV & ELV Vibration Tags Red Front

Self Write EAV & ELV Vibration Tags Red Front

Rigid hand arm vibration warning tabs provide a convenient user friendly method of labelling tools with the relevant vibration data. Using the original traffic light system, tools can be tagged according to vibration levels and usage time, for example a high vibration tool would require a red tag. The tags are durable and flexible; has UV-resistant properties and are extremely resistant to the elements. All designs are permanently laser etched into the plastic surface to make them easily read and long lasting. Designs can either be template layouts for completion with an indelible marker (self-write) or available with a range of pre-printed vibration data. Vibration Level Specific Hand arm vibration warning tags printed with vibration magnitude from 2.5m/s2 to 15m/s2 in 0.5m/s2 increments. Eg. 2.5, 3, 3.5 etc. The tags are also printed with the corresponding usage times in Points per Hour, EAV and ELV format.

GBP 1.53
1

Hand Arm Warning Vibration Tags Green Front

Hand Arm Warning Vibration Tags Green Front

Rigid hand arm vibration warning tabs provide a convenient user friendly method of labelling tools with the relevant vibration data. Using the original traffic light system, tools can be tagged according to vibration levels and usage time, for example a high vibration tool would require a red tag. The tags are durable and flexible; has UV-resistant properties and are extremely resistant to the elements. All designs are permanently laser etched into the plastic surface to make them easily read and long lasting. Designs can either be template layouts for completion with an indelible marker (self-write) or available with a range of pre-printed vibration data. Vibration Level Specific Hand arm vibration warning tags printed with vibration magnitude from 2.5m/s2 to 15m/s2 in 0.5m/s2 increments. Eg. 2.5, 3, 3.5 etc. The tags are also printed with the corresponding usage times in Points per Hour, EAV and ELV format.

GBP 1.54
1