56 results (0,12753 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Specific Metallic RAL, Design Options: JPC3 - X rear, Double doorbars and c

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Specific Metallic RAL, Design Options: JPC3 - X rear, Double doorbars and c

This Design utilizes two solid bent sections with gusseting as opposed to a welded joint ‘X’ in the door bars, this has an increased side impact resistance against a welded joint and greater aesthetic appearance, this cage also now utilize gusseting in the Centre ‘X’ and A Pillar Supports which again increases the resistance against side impacts and rolls. This cage follows the Motorsport UK Blue Book Specifications and has an approximate weight of 48KG Variations and additional bracing are available on request. These are available powder coated in a range of colours! Fully Motorsport UK compliant! The cage will come with sufficient reinforcement plates to be welded into the shell. Fitting available! These are made to order so please allow up to 10 working days for dispatch!

GBP 1423.80
1

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Specific RAL, Design Options: JPC1.5 (single diagonal, harness bar and sing

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Specific RAL, Design Options: JPC1.5 (single diagonal, harness bar and sing

This Design utilizes two solid bent sections with gusseting as opposed to a welded joint ‘X’ in the door bars, this has an increased side impact resistance against a welded joint and greater aesthetic appearance, this cage also now utilize gusseting in the Centre ‘X’ and A Pillar Supports which again increases the resistance against side impacts and rolls. This cage follows the Motorsport UK Blue Book Specifications and has an approximate weight of 48KG Variations and additional bracing are available on request. These are available powder coated in a range of colours! Fully Motorsport UK compliant! The cage will come with sufficient reinforcement plates to be welded into the shell. Fitting available! These are made to order so please allow up to 10 working days for dispatch!

GBP 995.40
1

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Unpainted, Design Options: JPC4 - With A Pillar Supports)

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Unpainted, Design Options: JPC4 - With A Pillar Supports)

This Design utilizes two solid bent sections with gusseting as opposed to a welded joint ‘X’ in the door bars, this has an increased side impact resistance against a welded joint and greater aesthetic appearance, this cage also now utilize gusseting in the Centre ‘X’ and A Pillar Supports which again increases the resistance against side impacts and rolls. This cage follows the Motorsport UK Blue Book Specifications and has an approximate weight of 48KG Variations and additional bracing are available on request. These are available powder coated in a range of colours! Fully Motorsport UK compliant! The cage will come with sufficient reinforcement plates to be welded into the shell. Fitting available! These are made to order so please allow up to 10 working days for dispatch!

GBP 1260.00
1

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Specific RAL, Design Options: JPC2 - Single Doorbars, X Rear)

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Specific RAL, Design Options: JPC2 - Single Doorbars, X Rear)

This Design utilizes two solid bent sections with gusseting as opposed to a welded joint ‘X’ in the door bars, this has an increased side impact resistance against a welded joint and greater aesthetic appearance, this cage also now utilize gusseting in the Centre ‘X’ and A Pillar Supports which again increases the resistance against side impacts and rolls. This cage follows the Motorsport UK Blue Book Specifications and has an approximate weight of 48KG Variations and additional bracing are available on request. These are available powder coated in a range of colours! Fully Motorsport UK compliant! The cage will come with sufficient reinforcement plates to be welded into the shell. Fitting available! These are made to order so please allow up to 10 working days for dispatch!

GBP 1121.40
1

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Specific Metallic RAL, Design Options: JPC2 - Single Doorbars, X Rear)

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Specific Metallic RAL, Design Options: JPC2 - Single Doorbars, X Rear)

This Design utilizes two solid bent sections with gusseting as opposed to a welded joint ‘X’ in the door bars, this has an increased side impact resistance against a welded joint and greater aesthetic appearance, this cage also now utilize gusseting in the Centre ‘X’ and A Pillar Supports which again increases the resistance against side impacts and rolls. This cage follows the Motorsport UK Blue Book Specifications and has an approximate weight of 48KG Variations and additional bracing are available on request. These are available powder coated in a range of colours! Fully Motorsport UK compliant! The cage will come with sufficient reinforcement plates to be welded into the shell. Fitting available! These are made to order so please allow up to 10 working days for dispatch!

GBP 1171.80
1

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Unpainted, Design Options: JPC2 - Single Doorbars, X Rear)

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Unpainted, Design Options: JPC2 - Single Doorbars, X Rear)

This Design utilizes two solid bent sections with gusseting as opposed to a welded joint ‘X’ in the door bars, this has an increased side impact resistance against a welded joint and greater aesthetic appearance, this cage also now utilize gusseting in the Centre ‘X’ and A Pillar Supports which again increases the resistance against side impacts and rolls. This cage follows the Motorsport UK Blue Book Specifications and has an approximate weight of 48KG Variations and additional bracing are available on request. These are available powder coated in a range of colours! Fully Motorsport UK compliant! The cage will come with sufficient reinforcement plates to be welded into the shell. Fitting available! These are made to order so please allow up to 10 working days for dispatch!

GBP 882.00
1

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Specific RAL, Design Options: JPC3 - X rear, Double doorbars and centre bra

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Specific RAL, Design Options: JPC3 - X rear, Double doorbars and centre bra

This Design utilizes two solid bent sections with gusseting as opposed to a welded joint ‘X’ in the door bars, this has an increased side impact resistance against a welded joint and greater aesthetic appearance, this cage also now utilize gusseting in the Centre ‘X’ and A Pillar Supports which again increases the resistance against side impacts and rolls. This cage follows the Motorsport UK Blue Book Specifications and has an approximate weight of 48KG Variations and additional bracing are available on request. These are available powder coated in a range of colours! Fully Motorsport UK compliant! The cage will come with sufficient reinforcement plates to be welded into the shell. Fitting available! These are made to order so please allow up to 10 working days for dispatch!

GBP 1373.40
1

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Unpainted, Design Options: JPC1.5 (single diagonal, harness bar and single

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Unpainted, Design Options: JPC1.5 (single diagonal, harness bar and single

This Design utilizes two solid bent sections with gusseting as opposed to a welded joint ‘X’ in the door bars, this has an increased side impact resistance against a welded joint and greater aesthetic appearance, this cage also now utilize gusseting in the Centre ‘X’ and A Pillar Supports which again increases the resistance against side impacts and rolls. This cage follows the Motorsport UK Blue Book Specifications and has an approximate weight of 48KG Variations and additional bracing are available on request. These are available powder coated in a range of colours! Fully Motorsport UK compliant! The cage will come with sufficient reinforcement plates to be welded into the shell. Fitting available! These are made to order so please allow up to 10 working days for dispatch!

GBP 756.00
1

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Specific RAL, Design Options: JPC4 - With A Pillar Supports)

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Specific RAL, Design Options: JPC4 - With A Pillar Supports)

This Design utilizes two solid bent sections with gusseting as opposed to a welded joint ‘X’ in the door bars, this has an increased side impact resistance against a welded joint and greater aesthetic appearance, this cage also now utilize gusseting in the Centre ‘X’ and A Pillar Supports which again increases the resistance against side impacts and rolls. This cage follows the Motorsport UK Blue Book Specifications and has an approximate weight of 48KG Variations and additional bracing are available on request. These are available powder coated in a range of colours! Fully Motorsport UK compliant! The cage will come with sufficient reinforcement plates to be welded into the shell. Fitting available! These are made to order so please allow up to 10 working days for dispatch!

GBP 1499.40
1

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Unpainted, Design Options: JPC3 - X rear, Double doorbars and centre brace)

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Unpainted, Design Options: JPC3 - X rear, Double doorbars and centre brace)

This Design utilizes two solid bent sections with gusseting as opposed to a welded joint ‘X’ in the door bars, this has an increased side impact resistance against a welded joint and greater aesthetic appearance, this cage also now utilize gusseting in the Centre ‘X’ and A Pillar Supports which again increases the resistance against side impacts and rolls. This cage follows the Motorsport UK Blue Book Specifications and has an approximate weight of 48KG Variations and additional bracing are available on request. These are available powder coated in a range of colours! Fully Motorsport UK compliant! The cage will come with sufficient reinforcement plates to be welded into the shell. Fitting available! These are made to order so please allow up to 10 working days for dispatch!

GBP 1071.00
1

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Specific Metallic RAL, Design Options: JPC4 - With A Pillar Supports)

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Specific Metallic RAL, Design Options: JPC4 - With A Pillar Supports)

This Design utilizes two solid bent sections with gusseting as opposed to a welded joint ‘X’ in the door bars, this has an increased side impact resistance against a welded joint and greater aesthetic appearance, this cage also now utilize gusseting in the Centre ‘X’ and A Pillar Supports which again increases the resistance against side impacts and rolls. This cage follows the Motorsport UK Blue Book Specifications and has an approximate weight of 48KG Variations and additional bracing are available on request. These are available powder coated in a range of colours! Fully Motorsport UK compliant! The cage will come with sufficient reinforcement plates to be welded into the shell. Fitting available! These are made to order so please allow up to 10 working days for dispatch!

GBP 1549.80
1

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Design Options: JPC3 - X rear, Double doorbars and centre brace)

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Design Options: JPC3 - X rear, Double doorbars and centre brace)

This Design utilizes two solid bent sections with gusseting as opposed to a welded joint ‘X’ in the door bars, this has an increased side impact resistance against a welded joint and greater aesthetic appearance, this cage also now utilize gusseting in the Centre ‘X’ and A Pillar Supports which again increases the resistance against side impacts and rolls. This cage follows the Motorsport UK Blue Book Specifications and has an approximate weight of 48KG Variations and additional bracing are available on request. These are available powder coated in a range of colours! Fully Motorsport UK compliant! The cage will come with sufficient reinforcement plates to be welded into the shell. Fitting available! These are made to order so please allow up to 10 working days for dispatch!

GBP 1197.00
1

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Design Options: JPC4 - With A Pillar Supports)

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Design Options: JPC4 - With A Pillar Supports)

This Design utilizes two solid bent sections with gusseting as opposed to a welded joint ‘X’ in the door bars, this has an increased side impact resistance against a welded joint and greater aesthetic appearance, this cage also now utilize gusseting in the Centre ‘X’ and A Pillar Supports which again increases the resistance against side impacts and rolls. This cage follows the Motorsport UK Blue Book Specifications and has an approximate weight of 48KG Variations and additional bracing are available on request. These are available powder coated in a range of colours! Fully Motorsport UK compliant! The cage will come with sufficient reinforcement plates to be welded into the shell. Fitting available! These are made to order so please allow up to 10 working days for dispatch!

GBP 1386.00
1

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Design Options: JPC2 - Single Doorbars, X Rear)

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Design Options: JPC2 - Single Doorbars, X Rear)

This Design utilizes two solid bent sections with gusseting as opposed to a welded joint ‘X’ in the door bars, this has an increased side impact resistance against a welded joint and greater aesthetic appearance, this cage also now utilize gusseting in the Centre ‘X’ and A Pillar Supports which again increases the resistance against side impacts and rolls. This cage follows the Motorsport UK Blue Book Specifications and has an approximate weight of 48KG Variations and additional bracing are available on request. These are available powder coated in a range of colours! Fully Motorsport UK compliant! The cage will come with sufficient reinforcement plates to be welded into the shell. Fitting available! These are made to order so please allow up to 10 working days for dispatch!

GBP 1008.00
1

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Specific Metallic RAL, Design Options: JPC1.5 (single diagonal, harness bar

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Colour: Specific Metallic RAL, Design Options: JPC1.5 (single diagonal, harness bar

This Design utilizes two solid bent sections with gusseting as opposed to a welded joint ‘X’ in the door bars, this has an increased side impact resistance against a welded joint and greater aesthetic appearance, this cage also now utilize gusseting in the Centre ‘X’ and A Pillar Supports which again increases the resistance against side impacts and rolls. This cage follows the Motorsport UK Blue Book Specifications and has an approximate weight of 48KG Variations and additional bracing are available on request. These are available powder coated in a range of colours! Fully Motorsport UK compliant! The cage will come with sufficient reinforcement plates to be welded into the shell. Fitting available! These are made to order so please allow up to 10 working days for dispatch!

GBP 1045.80
1

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Design Options: JPC1.5 (single diagonal, harness bar and single doorbars))

Vauxhall Corsa E / D VXR Bolt in Multipoint Competition Roll Cage (Design Options: JPC1.5 (single diagonal, harness bar and single doorbars))

This Design utilizes two solid bent sections with gusseting as opposed to a welded joint ‘X’ in the door bars, this has an increased side impact resistance against a welded joint and greater aesthetic appearance, this cage also now utilize gusseting in the Centre ‘X’ and A Pillar Supports which again increases the resistance against side impacts and rolls. This cage follows the Motorsport UK Blue Book Specifications and has an approximate weight of 48KG Variations and additional bracing are available on request. These are available powder coated in a range of colours! Fully Motorsport UK compliant! The cage will come with sufficient reinforcement plates to be welded into the shell. Fitting available! These are made to order so please allow up to 10 working days for dispatch!

GBP 882.00
1

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC2 - Single Doorbars, X Rear)

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC2 - Single Doorbars, X Rear)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1121.40
1

Mini R56 Bolt In Multipoint Competition Roll Cage (Colour: Specific Metallic RAL, Design Options: JPC3 - X rear, Double doorbars and centre brace)

Mini R56 Bolt In Multipoint Competition Roll Cage (Colour: Specific Metallic RAL, Design Options: JPC3 - X rear, Double doorbars and centre brace)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1423.80
1

Peugeot 205 Full Competition Roll Cage – MSUK Approved (Design Options: JPC4.5 - JPC4 with Diagonal roof, Colour: Unpainted)

Peugeot 205 Full Competition Roll Cage – MSUK Approved (Design Options: JPC4.5 - JPC4 with Diagonal roof, Colour: Unpainted)

🔧 Peugeot 205 Full Competition Roll Cage – MSUK-Approved for Motorsport! Take your Peugeot 205 to full competition spec with our MSUK-compliant Full Roll Cage. Designed for serious motorsport applications, this cage provides maximum driver protection, chassis rigidity, and track-ready durability. Whether you’re competing in rally, hill climbs, sprints, or circuit racing, this precision-built roll cage meets the highest safety standards. ✔ MSUK Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Fully designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Powder-Coated Finish – Choose from a range of colours ✔ Fitting Available – Professional installation service upon request 💡 Need a half cage instead? Check out our Peugeot 205 Rear Half Roll Cage for a lighter alternative. 🔹 Choose Your Roll Cage Configuration We offer six competition-ready designs, allowing you to select the ideal balance of weight, reinforcement, and safety for your motorsport needs. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Reinforces side impact protection ✔ Diagonal Rear Brace – Improves chassis strength ✔ Harness Bar – Provides a secure mounting point 📌 JPC2 – Enhanced Chassis Stiffness ✔ Single Door Bars – Maintains accessibility ✔ X-Rear Brace – Adds superior rear reinforcement ✔ Harness Bars – Ensures a secure harness mounting point 📌 JPC3 – Maximum Side Impact Protection ✔ Double Door Bars – Increases side protection for both driver & co-driver ✔ X-Rear Brace – Reduces chassis flex ✔ Harness Bars – Provides compliant harness mounting 📌 JPC4 – Ultimate Strength for Competition ✔ Double Door Bars – Extra impact protection ✔ X-Rear Brace – Enhanced rigidity for motorsport conditions ✔ Harness Bars – Secure mounting for safety harnesses ✔ A-Pillar Supports – Reinforces front impact zones 📌 JPC4.5 – Increased Roof & Chassis Stability ✔ Double Door Bars & X-Rear Brace – Maximum protection ✔ Harness Bars & A-Pillar Supports – Extra chassis support ✔ Diagonal Roof Brace – Enhances rollover protection 📌 JPC5 – Full Competition Spec with X-Roof Bracing ✔ Double Door Bars & X-Rear Brace – Ultimate roll-over protection ✔ Harness Bars & A-Pillar Supports – Superior chassis reinforcement ✔ X-Roof Bracing – The strongest roof support for extreme motorsport conditions 💡 Not sure which configuration suits your needs? Contact us for expert advice or refer to our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Peugeot 205 Full Roll Cage is engineered using motorsport-grade steel, designed to increase chassis rigidity while improving driver safety in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a perfect fit every time ✔ High-Strength Steel – Built to exceed motorsport safety standards ✔ Mounting Plates Included – Supplied with MSUK-spec weld-in plates 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide Our Peugeot 205 Full Roll Cage is designed for straightforward installation with MSUK-approved weld-in mounting plates. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove all trim & clean mounting areas 2️⃣ Weld the MSUK mounting plates to ensure secure cage installation 3️⃣ Fit the roll cage sections together – Align all components c

GBP 1360.80
1

Peugeot 205 Full Competition Roll Cage – MSUK Approved (Design Options: JPC2 - Single Doorbars, X Rear, Colour: Unpainted)

Peugeot 205 Full Competition Roll Cage – MSUK Approved (Design Options: JPC2 - Single Doorbars, X Rear, Colour: Unpainted)

🔧 Peugeot 205 Full Competition Roll Cage – MSUK-Approved for Motorsport! Take your Peugeot 205 to full competition spec with our MSUK-compliant Full Roll Cage. Designed for serious motorsport applications, this cage provides maximum driver protection, chassis rigidity, and track-ready durability. Whether you’re competing in rally, hill climbs, sprints, or circuit racing, this precision-built roll cage meets the highest safety standards. ✔ MSUK Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Fully designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Powder-Coated Finish – Choose from a range of colours ✔ Fitting Available – Professional installation service upon request 💡 Need a half cage instead? Check out our Peugeot 205 Rear Half Roll Cage for a lighter alternative. 🔹 Choose Your Roll Cage Configuration We offer six competition-ready designs, allowing you to select the ideal balance of weight, reinforcement, and safety for your motorsport needs. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Reinforces side impact protection ✔ Diagonal Rear Brace – Improves chassis strength ✔ Harness Bar – Provides a secure mounting point 📌 JPC2 – Enhanced Chassis Stiffness ✔ Single Door Bars – Maintains accessibility ✔ X-Rear Brace – Adds superior rear reinforcement ✔ Harness Bars – Ensures a secure harness mounting point 📌 JPC3 – Maximum Side Impact Protection ✔ Double Door Bars – Increases side protection for both driver & co-driver ✔ X-Rear Brace – Reduces chassis flex ✔ Harness Bars – Provides compliant harness mounting 📌 JPC4 – Ultimate Strength for Competition ✔ Double Door Bars – Extra impact protection ✔ X-Rear Brace – Enhanced rigidity for motorsport conditions ✔ Harness Bars – Secure mounting for safety harnesses ✔ A-Pillar Supports – Reinforces front impact zones 📌 JPC4.5 – Increased Roof & Chassis Stability ✔ Double Door Bars & X-Rear Brace – Maximum protection ✔ Harness Bars & A-Pillar Supports – Extra chassis support ✔ Diagonal Roof Brace – Enhances rollover protection 📌 JPC5 – Full Competition Spec with X-Roof Bracing ✔ Double Door Bars & X-Rear Brace – Ultimate roll-over protection ✔ Harness Bars & A-Pillar Supports – Superior chassis reinforcement ✔ X-Roof Bracing – The strongest roof support for extreme motorsport conditions 💡 Not sure which configuration suits your needs? Contact us for expert advice or refer to our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Peugeot 205 Full Roll Cage is engineered using motorsport-grade steel, designed to increase chassis rigidity while improving driver safety in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a perfect fit every time ✔ High-Strength Steel – Built to exceed motorsport safety standards ✔ Mounting Plates Included – Supplied with MSUK-spec weld-in plates 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide Our Peugeot 205 Full Roll Cage is designed for straightforward installation with MSUK-approved weld-in mounting plates. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove all trim & clean mounting areas 2️⃣ Weld the MSUK mounting plates to ensure secure cage installation 3️⃣ Fit the roll cage sections together – Align all components c

GBP 882.00
1

Mini R56 Bolt In Multipoint Competition Roll Cage (Colour: Specific Metallic RAL, Design Options: JPC5 - JPC4 with X roof)

Mini R56 Bolt In Multipoint Competition Roll Cage (Colour: Specific Metallic RAL, Design Options: JPC5 - JPC4 with X roof)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1713.60
1

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC1.5 (single diagonal, harness bar and single doorbars))

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC1.5 (single diagonal, harness bar and single doorbars))

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1045.80
1

Mini R56 Bolt In Multipoint Competition Roll Cage (Colour: Unpainted, Design Options: JPC4 - With A Pillar Supports)

Mini R56 Bolt In Multipoint Competition Roll Cage (Colour: Unpainted, Design Options: JPC4 - With A Pillar Supports)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1260.00
1

Mini R56 Bolt In Multipoint Competition Roll Cage (Colour: Unpainted, Design Options: JPC2 - Single Doorbars, X Rear)

Mini R56 Bolt In Multipoint Competition Roll Cage (Colour: Unpainted, Design Options: JPC2 - Single Doorbars, X Rear)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 882.00
1

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC4.5 - JPC4 with Diagonal roof)

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC4.5 - JPC4 with Diagonal roof)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1486.80
1