138 results (0,14183 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Fireclass FC64 AC Repeater Panel 557.200.707FC

Fireclass FC64 AC Repeater Panel 557.200.707FC

Fireclass FC64 AC Repeater Panel 557.200.707FCThe FireClass range of repeaters are designed for use with the FireClass 32 64 and 240 panel ranges. There is a dedicated a.c. model available for the FireClass32 panel and both a.c. and d.c. versions available for the FireClass64 and FireClass240 systems.The d.c. repeater is supplied in a compact and stylish housing ideal for use where space is limited or aesthetics are important. The repeater has an identical backlit LCD display as per the main panel and complements the system by offering full user control. Up to 7 repeaters can be connected to the repeater terminals via the remote bus.Key FeaturesCompatible with FireClass Panels Designed for use with FireClass 32 64 and 240 panel rangesAC and DC Versions Available in both AC and DC models for flexibility in different system setupsCompact and Stylish Housing Ideal for installations where space is limited or aesthetics are a priorityFull User Control Features an identical backlit LCD display as the main panel for seamless operationSupports Multiple Repeaters Connect up to 7 repeaters via the remote bus for expanded system coverageEnhanced System Integration Complements the main fire panel providing additional monitoring and control points

GBP 1069.85
1

Carrier PS48VDC480W-DIN 100-240V AC Input 48VDC 480W Power Supply With DIN Rail Mount

Carrier PS48VDC480W-DIN 100-240V AC Input 48VDC 480W Power Supply With DIN Rail Mount

Carrier PS48VDC480W-DIN 100-240V AC Input 48VDC 480W Power Supply With DIN Rail MountCarrier Fire Securitys wide range of power supplies provide solutions for all the majority of various applications. Available in wall format with adaptors Carrier Fire Security supplies can be used with all major power plugs. Solutions include both in wall and power brick configurations. Switching supplies include advanced technology and power savings meeting Level V 5 International Efficiency in compliance with California Energy Commission Energy Star and the EU Code of Conduct for external power supplies. Supplies can be mixed and matched to a variety of Carrier Fire Security products to meet installation requirements.Key Features48VDC Din-Rail power supplies AC Input 100240V AC - 5060Hz.High efficiency and Low power dissipationBuilt-in active PFC function PF0.93Over load protections Short CircuitOverloadOver Voltage Over temperatureCooling by Free Air convectionCan be installed on DIN Rail TS-357.5 or 3515UL 508 industrial control equipment approvedEN61000-6-2 EN50082-2 industrial immunity levelBuilt-in DC OK Relay contact100 full load burn-in tested2 year warranty

GBP 493.19
1

Klaxon TCB-0018 EXD Sounder 100-240v AC

Klaxon TCB-0018 EXD Sounder 100-240v AC

Klaxon EXD Sounder 100-240v AC - TCB-0018The EXD Sounder has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. The unit incorporates a three stage alarm option with sixty three tones to choose from which includes four tones that can be recorded or customised by the installer. All tones can be pre-set during installation.The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments. The design allows for termination inside the enclosure. The sounder is supplied with a mounting bracket as standard.Key FeaturesApproved by ATEX and CQST IMETRO and IECEXPendingATEX II 2G Exd IIC T4 - T6 incorporating IIA IIBZones 12 Zones 2122 PendingConforms to EN IEC 60079-0 EN IEC 60079-1 and EN54Volume controlDustproof Weatherproof

GBP 975.95
1

Fireclass 557.200.956FC FC8AS 80 Zone AC Repeater

Fireclass 557.200.956FC FC8AS 80 Zone AC Repeater

Fireclass 557.200.956FC FC8AS 80 Zone AC RepeaterThe FC700 FireClass range of repeaters include both AC and DC powered models with the option for single or multiple zonal displays. The FC8AS repeater is designed to match the performance and style of the FC708D 80 zone control panel however it can be used with any FireClass FC700 detection panel.The FC700 FC1DS FireClass fully functional Repeater is designed for applications where full functionality is required in a compact discrete and architecturally attractive package. The FC700 FC1D2 Display Only Repeater offers basic functionality and overview of the system status of the FireClass fire detection system. The optional matching slim-line 40 way and 80-way zonal LED displays are available.FC700 FireClass panels and repeaters feature an advanced TFT colour touchscreen user interface that is ergonomically engineered specifically for fire alarm control. It is designed for operation with or without gloves and provides easy-to-use intuitive and flexible user controls including keyless log-on using RFID tags coded for different access levels.Up to seven FC700 touch screen repeaters can be connected to each FC700 control panel. Each repeater gives full user control and functionality interfacing with the control panel using an Ethernet connection. The FC700 FireClass repeaters uses a direct network connection local network WiFi wireless or VPN with a maximum distance between the panel and the network point or repeater and network point of 100 m.Key Features8.4 TFT colour touch screen multilingual user interface - architecturally attractive and fully programmableErgonomic Icon Display - Simple to operate user interface eliminates operator errorsTouch sensitive status LEDs provide event summaryInformation - Instant access to detailed event informationContext sensitive help and on-screen operator instructions - reduces the need for user trainingUser configurable on-screen site maps - No need for additional site plansProgrammable graphic quiescent display - Opportunity for customer brandingComprehensive point management and disable functions - Gives the user full control and reduces service and maintenance effortSelectively view or print from the extensive 10000 event log using dynamic filters Effective event diagnostics to quickly resolve site investigationsKeyless log-on using RFID tags - Identifies and logs user actionsFlush mount kit available

GBP 1526.54
1

CST AC-HB-DFCLL-X DeafCall Transmitter

CST AC-HB-DFCLL-X DeafCall Transmitter

CST AC-HB-DFCLL-X DeafCallTransmitterTheAC-HB-DFCLL-X is a DeafCall Transmitter for use with the DeafCall paging system.DeafCall paging system is the perfect solution for alerting individuals who have hearing impairments when a fire alarm has been activated ensuring they have time to take appropriate action. DeafCall also fully complies with the requirements of the Equality Act 2010 and British Standard BS 5839 EN 54-4.DeafCall provides critical alerts for deaf and hard-of-hearing people on your premises enabling you to alert them in the event of a fire security breach or other critical situation.Currently used in over 1000 locations in the UK DeafCall is a reliable easy-to-use and cost-effective solution to ensure you are putting the safety of your staff first whilst also fulfilling your statutory requirements.Please note This system connects directly to the fire alarm panel via a clean closed contact.Key FeaturesA powerful 4W transmitter8 contact inputsSerial IP2 relay inputs8 outputsChannel checkHigh reliabilityLong rangeBattery back-up for 24 hour coverage. This includes a low battery audible alarm which alerts the fire panel

GBP 2361.15
1

Klaxon Syrex EXD Buzzer ATEX 230v AC - TCA-0001 17-970220

Klaxon Syrex EXD Buzzer ATEX 230v AC - TCA-0001 17-970220

Klaxon Syrex Exd Buzzer ATEX 230v AC - TCA-0001 17-970220The Exd Buzzer is an explosion proof buzzer designed for use in hazardous areas where a distinctive signal is required. Certified to ATEX II 2G Exd e IIC T6 it is suitable for use in Zone 1 and Zone 2 areas. Producing a tone with low frequency it cuts through background noise more effectively than many other devices of a similar output. Mounted in a rugged reinforced polyester case and weatherproof to IP66 it is suitable for use in the most arduous conditions.Key FeaturesRated for Category 2 use formerly Zone 1 2ATEX approvedII 2G Exd e IIC T6Heavy duty buzzerWeatherproof to IP66Rugged construction

GBP 1685.24
1

Klaxon Syrex EXD Buzzer ATEX 110v AC - TCA-0069 17-970235

Klaxon Syrex EXD Buzzer ATEX 110v AC - TCA-0069 17-970235

Klaxon Syrex Exd Buzzer ATEX 110v AC - TCA-0069 17-970235The Exd Buzzer is an explosion proof buzzer designed for use in hazardous areas where a distinctive signal is required. Certified to ATEX II 2G Exd e IIC T6 it is suitable for use in Zone 1 and Zone 2 areas. Producing a tone with low frequency it cuts through background noise more effectively than many other devices of a similar output. Mounted in a rugged reinforced polyester case and weatherproof to IP66 it is suitable for use in the most arduous conditions.Key FeaturesRated for Category 2 use formerly Zone 1 2ATEX approvedII 2G Exd e IIC T6Heavy duty buzzerWeatherproof to IP66Rugged construction

GBP 1685.24
1

CST AC-HB-PROLP-X AlarmCall Lite

CST AC-HB-PROLP-X AlarmCall Lite

CST AC-HB-PROLP-X AlarmCall LiteAlarmCall Lite AC-HB-PROLP-X is ideal for all sizes of premises and affordable to proprietors of smaller establishments and properties. The system provides up to 500mW of power output from a neat wall-mounted enclosure attached to an external dipole aerial. It has the option of fused spur power supply or three-pin socket.An LED indicates its power and transmission status. It can transmit messages as long as 20 characters to POCSAG compatible personal pagers.AlarmCall Paging Systems is the cost-effective monitoring systems that provide a real alternative to haemorrhaging money through reacting to false alarms. Based on a sophisticated paging system AlarmCall Paging System immediately notifies the designated fire marshals exactly where the fire alarm has been activated. They then have a short time agreed with the local Fire Service in which to establish the validity of the alarm prior to it reaching the Call Out status. Working as a team one marshal will go to the source of the alarm whilst the other goes on standby next to the central alarm panel. If as in the case of 90 of fire alarms the call is false the marshals can communicate via phone or two-way radio and the Call Out can be aborted.Apart from schools AlarmCall can form an important part of retail communication solutions as well as being of use to those working in the hospitality industry. False alarms can be disastrous if they happen at the busiest shopping time or over a lunch break driving customers away and resulting in a loss of revenue. By using AlarmCall to deal with any potential false alarms in a time and efficient manner you can prevent the alarm from going off and keep your customers happy. AlarmCall can also be used in industrial premises where a false alarm would have a serious impact on productivity and output. Because the AlarmCall system pinpoints the location of the alert it can be especially useful in large buildings and can help managers coordinate any evacuation safely should the alarm prove to be genuine. AlarmCall can be of great benefit to businesses and schools alike by saving time improving safety and preventing lost revenue due to false alarms.ConfigurableTheAC-HB-PROLP-XAlarmCall Lite can be configured and cloned through serial commands.Alarm Call Lite OptionsWith the purchase of a license the following features are availableIncrease of output power from 500mW to 4W.Support for additional protocols other than the default WT ProtocolAntenna mismatch detection.Store and forward repeater operation.Key FeaturesIncrease productivity emergency responsiveness and eliminate false alarms and unnecessary evacuations by delivering fire and safety security and operational critical messaging instantlyTrusted by household names all over the UK - including ASDA Ocado and AmazonThe only critical messaging solution to broadcast alerts simultaneously via pagers two-way radios and SMSCommunicates with all common fire alarm panel protocolsFully monitored and battery backed up giving you 24 hours of uninterrupted service in the event of power failureA powerful 4W transmitter4 contact inputsSerial to EasyCall or Gen2 softwareChannel checkSerial Scope protocol

GBP 886.55
1

Klaxon SWG-0036 GP6 Siren 400v AC 60hz ATEX

Klaxon SWG-0036 GP6 Siren 400v AC 60hz ATEX

Klaxon SWG-0036 GP6 Siren 400v AC 60hz ATEXThe GP range of conventional motor-powered sirens provide a basic solution to address wide area mass alert signalling for all industrial civil commercial and environmental requirements. The products are of simple rugged construction and provide a low frequency traditional air raid sound.Key Features475Hz constant tone signal for the GP6 GP10 sirensRoughly omni-directional sound coverage which peaks in the direction of the front stator face400Vac - 10 50Hz 3 phase nominal power supply requirementOperating temperature range for the standard GP6 GP10 units of -20 to 60 degrees CCast aluminium steel constructionEnvironmental rating of IP55If the power supply to the sirens is pulsed to enable the siren to produce a wail tone then the maximum run time of the siren is reduced from continuous for constant tone to 15 minutesControl units can be supplied to enable the siren to produce the wail tone signal with associated control switchesIf mounted in a climate where icing can occur the unit should be fitted with thermostatically controlled heatersThe Motor windings are tropicalized as standardAnti-condensation heaters for the motor can be supplied

GBP 5826.79
1

Klaxon Syrex Exd Bell ATEX 230v AC - TCA-0002 17-970232

Klaxon Syrex Exd Bell ATEX 230v AC - TCA-0002 17-970232

Klaxon Syrex Exd Bell ATEX 230v AC - TCA-0002 17-970232The Exd Bell is designed for use in Zone 1 and 2 areas and for areas requiring a high degree of weatherproof protection. IP66 rated and certified to ATEX II 2G Exd e IIC T6 it can be used in almost any environment. With a sound output of up to 105dB it provides a clear signal which stands out against background noise.A telephone ringing version is also available. The housing is manufactured from glass fibre reinforced polyester with stainless steel fittings designed to cope in arduous conditions. In addition all DC versions are equipped with a non-wearing electronic contact breaker which gives a long and reliable life.Key FeaturesRated for Category 2 use formerly Zone 1 2ATEX approvedII 2G Exd e IIC T6Clear audible signal designed to penetrate background noiseWeatherproof to IP66Rugged constructionChoice of voltages

GBP 1787.38
1

Notifier Honeywell ABT-DMS Zone Microphone

Notifier Honeywell ABT-DMS Zone Microphone

Notifier Honeywell ABT-DMS Zone MicrophoneABT-DMS can only be used for purposes not related to evacuation alarm. Zone microphone is equipped with intercom function which provides two-way communication between the zone microphones.ABT-DMS has 4 local audio inputs on board and 1 audio output which allows for further system extension. Communication with control units takes place via Ethernet 10100BASE -TX 1 LAN port.DetailsFour non-symmetrical audio inputs 18 stereo jack connectorBuilt-in speakerStereo jack sockets for Headset Audio outImplemented intercom functionExtension up to five 20-button modulesPower supply via POE or locally 48 VDC

GBP 1976.45
1

Klaxon EXD Beacon 10J Xenon Red Lens 100-240v AC TCB-0008

Klaxon EXD Beacon 10J Xenon Red Lens 100-240v AC TCB-0008

Klaxon EXD Beacon 10J Xenon Red Lens 100-240v AC TCB-0008The EXD Beacon range has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. These beacons have a choice of two types of light source either Xenon strobe with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings.The design allows for termination inside the enclosure. The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.Key FeaturesApproved by ATEX and CQST IMETRO and IECEX PendingATEX II 2G Exd IIC T4 - T6 incorporating IIA IIBZones 12 Zones 2122 PendingConforms to EN IEC 60079-0 EN IEC 60079-1 and EN54360 degree light output around the vertical axisDustproof Weatherproof

GBP 962.77
1

Klaxon EXD Beacon Red 10W LED Lens 100-240v AC - TCB-0016

Klaxon EXD Beacon Red 10W LED Lens 100-240v AC - TCB-0016

Klaxon EXD Beacon Red 10W LED Lens 100-240v AC - TCB-0016The EXD Beacon range has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. These beacons have a choice of two types of light source either Xenon strobe with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings.The design allows for termination inside the enclosure. The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.Key FeaturesApproved by ATEX and CQST IMETRO and IECEX PendingATEX II 2G Exd IIC T4 - T6 incorporating IIA IIBZones 12 Zones 2122 PendingConforms to EN IEC 60079-0 EN IEC 60079-1 and EN54360 degree light output around the vertical axisDustproof Weatherproof

GBP 918.26
1

Klaxon TCB-0004 EXD Beacon 5J Xenon Red Lens 100-240v AC

Klaxon TCB-0004 EXD Beacon 5J Xenon Red Lens 100-240v AC

Klaxon EXD Beacon 5J Xenon Red Lens 100-240v AC TCB-0004The EXD Beacon range has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. These beacons have a choice of two types of light source either Xenon strobe with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings.The design allows for termination inside the enclosure. The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.Key FeaturesApproved by ATEX and CQST IMETRO and IECEX PendingATEX II 2G Exd IIC T4 - T6 incorporating IIA IIBZones 12 Zones 2122 PendingConforms to EN IEC 60079-0 EN IEC 60079-1 and EN54360 degree light output around the vertical axisDustproof Weatherproof

GBP 962.77
1

Klaxon EXD Beacon 20J Xenon Amber Lens 100-240v AC TCB-0010

Klaxon EXD Beacon 20J Xenon Amber Lens 100-240v AC TCB-0010

Klaxon EXD Beacon 20J Xenon Amber Lens 100-240v AC TCB-0010The EXD Beacon range has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. These beacons have a choice of two types of light source either Xenon strobe with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings.The design allows for termination inside the enclosure. The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.Key FeaturesApproved by ATEX and CQST IMETRO and IECEX PendingATEX II 2G Exd IIC T4 - T6 incorporating IIA IIBZones 12 Zones 2122 PendingConforms to EN IEC 60079-0 EN IEC 60079-1 and EN54360 degree light output around the vertical axisDustproof Weatherproof

GBP 990.66
1

Klaxon EXD Beacon 10J Xenon Amber Lens 100-240v AC TCB-0006

Klaxon EXD Beacon 10J Xenon Amber Lens 100-240v AC TCB-0006

Klaxon EXD Beacon 10J Xenon Amber Lens 100-240v AC TCB-0006The EXD Beacon range has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. These beacons have a choice of two types of light source either Xenon strobe with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings.The design allows for termination inside the enclosure. The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.Key FeaturesApproved by ATEX and CQST IMETRO and IECEX PendingATEX II 2G Exd IIC T4 - T6 incorporating IIA IIBZones 12 Zones 2122 PendingConforms to EN IEC 60079-0 EN IEC 60079-1 and EN54360 degree light output around the vertical axisDustproof Weatherproof

GBP 962.77
1

Klaxon TCB-0002 EXD Beacon 5J Xenon Amber Lens 100-240v AC

Klaxon TCB-0002 EXD Beacon 5J Xenon Amber Lens 100-240v AC

Klaxon EXD Beacon 5J Xenon Amber Lens 100-240v AC TCB-0002The EXD Beacon range has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. These beacons have a choice of two types of light source either Xenon strobe with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings.The design allows for termination inside the enclosure. The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.Key FeaturesApproved by ATEX and CQST IMETRO and IECEX PendingATEX II 2G Exd IIC T4 - T6 incorporating IIA IIBZones 12 Zones 2122 PendingConforms to EN IEC 60079-0 EN IEC 60079-1 and EN54360 degree light output around the vertical axisDustproof Weatherproof

GBP 962.77
1

International Gas Detectors TOC-750-150B TOCSIN 750 Control Panel - 5AH Battery Backup - Colour Touch Screen HMI 110230V AC 5060HZ 150W

International Gas Detectors TOC-750-150B TOCSIN 750 Control Panel - 5AH Battery Backup - Colour Touch Screen HMI 110230V AC 5060HZ 150W

International Gas Detectors TOC-750-150B TOCSIN 750 Control Panel - 5AH Battery Backup - Colour Touch Screen HMI 110230V AC 5060HZ 150WKey FeaturesThe latest addressable technology from International Gas Detectors.Communication over PowerOnly uses 2 Core Cable for Power and Communication.Polarity Independent.Typical System is 40 Faster to Install with Fewer ConnectionsImproved reliabilityImproved connectivity to external systemsRe-use Existing Cabling When Updating ATEX and Safe Area Gas DetectorsUSB For Backup and Data CollectionEthernet ConnectivityFull Event Monitoring Time Date Stamped Rs485 BMS Connectivity

GBP 1946.70
1

International Gas Detectors TOC-750-150 TOCSIN 750 Control Panel - No Battery Backup - Colour Touch Screen HMI 110230V AC 5060HZ 150W

International Gas Detectors TOC-750-150 TOCSIN 750 Control Panel - No Battery Backup - Colour Touch Screen HMI 110230V AC 5060HZ 150W

International Gas Detectors TOC-750-150 TOCSIN 750 Control Panel - No Battery Backup - Colour Touch Screen HMI 110230V AC 5060HZ 150WKey FeaturesThe latest addressable technology from International Gas Detectors.Communication over PowerOnly uses 2 Core Cable for Power and Communication.Polarity Independent.Typical System is 40 Faster to Install with Fewer ConnectionsImproved reliabilityImproved connectivity to external systemsRe-use Existing Cabling When Updating ATEX and Safe Area Gas DetectorsUSB For Backup and Data CollectionEthernet ConnectivityFull Event Monitoring Time Date Stamped Rs485 BMS Connectivity

GBP 1812.87
1

International Gas Detectors TOC-750-300 TOCSIN 750 Control Panel - No Battery Backup - Colour Touch Screen HMI 110230V AC 5060HZ 300W

International Gas Detectors TOC-750-300 TOCSIN 750 Control Panel - No Battery Backup - Colour Touch Screen HMI 110230V AC 5060HZ 300W

International Gas Detectors TOC-750-300 TOCSIN 750 Control Panel - No Battery Backup - Colour Touch Screen HMI 110230V AC 5060HZ 300WKey FeaturesThe latest addressable technology from International Gas Detectors.Communication over PowerOnly uses 2 Core Cable for Power and Communication.Polarity Independent.Typical System is 40 Faster to Install with Fewer ConnectionsImproved reliabilityImproved connectivity to external systemsRe-use Existing Cabling When Updating ATEX and Safe Area Gas DetectorsUSB For Backup and Data CollectionEthernet ConnectivityFull Event Monitoring Time Date Stamped Rs485 BMS Connectivity

GBP 1978.34
1

International Gas Detectors TOC-635-50 System Controller - 110230V AC 5060Hz 50W

International Gas Detectors TOC-635-50 System Controller - 110230V AC 5060Hz 50W

International Gas Detectors TOC-635-50 System Controller - 110230V AC 5060Hz 50WThe TOC-635 gas detection control panel is a small format economical controller for up to 1-8 or 1-32 detectorsdevices. It is ideally suited for small to medium size applications. The system features IGDs ground-breaking 2-Wire Addressable technology for easy installations. In addition the system features automatic 1-click system setup for faster and error-free commissioning. The system will automatically setup detector alarm levels and control panel outputs within a matter of minutes.Simple cost-effective and reliable. gas detection control panel.Key FeaturesThe latest addressable technology from International Gas Detectors.Only uses 2 Core Cable for Power and Communication.Polarity Independent.Typical System is 40 Faster to Install with Fewer Connections Bluetooth For Backup setup and Data CollectionImproved Connectivity to External systemsRe-use Existing Cabling When UpdatingATEX and Safe Area Gas DetectorsBluetooth For Backup setup and Data CollectionFull Event Monitoring Time Date StampedEach Detector Node Has its Own IO Points for Ultimate Flexibility

GBP 735.75
1