5 results (0,12332 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

220x90mm - Double Airbrick with Grille - GPVC220

220x90mm - Double Airbrick with Grille - GPVC220

Double Airbrick with Grille - Double Airbrick Adaptor to fit 204mmx60mm or 220x90mm ducting systems - Comes with pre-fitted with two brown or white airbrick grilles - Specially designed to provide 90% free area supply and extract air vent in accordance with 2010 Domestic Ventilation Compliance Guide - Can be used in a bathroom, kitchen, ulility or part of whole house ducting systems Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems Is designed to be low profile to fit inside ceilings, floor slabs, or to be concealed above kitchen wall units. It is best utilised as part of a ducting system for high powered cooker hood extractors and whole house ventilation systems, such as heat recovery systems or mechanical ventilation systems in offices, houses, and apartments. KEY FEATURES: UK Manufactured Easy to install and durable, just push-fit duct and fittings together Compatible with most other manufactures Extensive range of fittings, outlets, and grilles available Max / Min Temperature: +60c / -15c. DW/154 and meets UL94HB Flammability standard Suitable to use in compliance with Part F Building Regulations. Sap Appendix Q Compliant Airflow performance independently tested by BSRIA or BRE. Compatibility Can be used as part in 204x60mm or220x90mm ductwork systems with suppliers such as Verplas(VKC5733G), Vent Axia(449224), Manrose (60977). Performance Solid Rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or Aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend You provide greater mechanical strength to a joint by using a combination of Plastic Ducting Sealant and Aluminium Duct Sealing Tape Apply Duct sealant to the male fitting Push together Apply Aluminium Duct Sealing Tape over joint

GBP 11.20
1

Rectangular Self Seal Coupling Duct to Duct

Rectangular Self Seal Coupling Duct to Duct

Rectangular Self Seal Coupling Duct to Duct Prouct Part Number 204x60mm Duct to Duct Coupling - VSS204DD 220x90mm Duct to Duct Coupling - VSSC220DD Description  204x60mm Self Seal Conn Duct to Duct - VSSC204DD Used to connect 204x60mm ducting to a 204x60mm ducting Zero air leakage No tape or sealant required Quick and easy to install Duct to fitting also available - VSSC204DF 22X90mm Self Seal Conn Duct to Duct - VSSC220DD Used to connect 220x90mm ducting to a 220x90mm fitting Zero air leakage No tape or sealant required Quick and easy to install Duct to fitting also available - VSSC220DF Our PVC ducting range is UK manufactured with high quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your Ventilation system, Kitchen extractor fan, bathroom fan or In-Line Extract Fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems Performance Solid Rigid ducting systems are suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible pvc or Aluminium duct. Suitable to use in compliance with Part F Building Regulations. Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping PVC duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations

GBP 9.73
1

Short Round to Rectangular Adaptor Female

Short Round to Rectangular Adaptor Female

110x54mm - Short Round to Rectangular Adaptor Female Product part Number Short Round Female Adaptor - AS110100 Description Adaptor for 100mm round female spigot to 110mm x 54mm rectangular duct pipe Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans It can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Performance Solid Rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend You provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping PVC duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm Rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations Available Sizes 110x54mm rectangular to 100mm

GBP 2.96
1

Rectangular Self Seal Coupling Duct to Fitting

Rectangular Self Seal Coupling Duct to Fitting

Rectangular Self Seal Coupling Duct to Fitting Product Part Number 204x60mm Duct to Fitting Coupling - VSSC204DF 220x90mm Duct to Fitting Coupling - VSSC220DF 204X60 Self Seal Conn Duct to Fitting - VSSC204DF Used to connect 204X60 mm ducting to a 204X60mm fitting Zero air leakage No tape or sealant required Quick and easy to install Duct to duct fitting also available - VSSC204DD 220X90mm Self Seal Conn Duct to Fitting - VSSC220DF Used to connect 220x90mm ducting to a 220x90mm fitting Zero air leakage No tape or sealant required Quick and easy to install Duct to duct fitting also available - VSSC220DD Description Our PVC ducting range is UK manufactured with high quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your Ventilation system, Kitchen extractor fan, bathroom fan or In-Line Extract Fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems. Performance Solid Rigid ducting systems are suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible pvc or Aluminium duct. Suitable to use in compliance with Part F Building Regulations. Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping PVC duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations

GBP 8.27
1

Verplas 125mm - PVC Self Seal Connector Duct to Fitting

Verplas 125mm - PVC Self Seal Connector Duct to Fitting

Verplas 125mm - PVC Self Seal Connector Duct to Fitting Product Part Number 125mm - PVC Self Seal Connector duct to fitting - VSSC125PF Description Used to connect 125mm ducting to 125mm fitting Zero air leakage No tape or sealant required Quick and easy to instal Duct to duct also available - VSSC125PP Top Quality UK Manufactured duct to duct connectors  Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your Ventilation system, Kitchen extractor fan, bathroom fan or In-Line Extract Fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems Performance Solid Rigid ducting systems are suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible pvc or Aluminium duct. Suitable to use in compliance with Part F Building Regulations. Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping PVC duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations Sizes Self Seal duct to fitting is available in 125mm if you require larger ductwork we recommend you use Metal Spiral ducting and fittings due to superior strength

GBP 10.13
1