37 results (0,17597 seconds)

Show all filters

Brand

Colour

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Netlighting Knightsbridge Ambar Twin Tilt Square Downlight White - AMA2TSW

Netlighting Knightsbridge Ambar Twin Tilt Square Downlight White - AMA2TSW

Knightsbridge Ambar Twin Tilt Square Downlight White - AMA2TSW | Description: Ambar is a sleek architectural range of downlights designed for residential, commercial, and hospitality applications that demand quality. The heads are fully adjustable, allowing for directional aiming. The single, twin, tri, and quad options allow the user to direct light where it is required; an example could be a corner table requiring a single fixture, or a dining table requiring a quad fixture, with lamps aimed at different areas of the table providing uniform architectural lighting effects - the possibilities are endless. The complete range is compatible with Knightsbridge GU10 light sources, with dimmable, non-dimmable, and SmartKnight options, boasting a wide array of colour temperatures and controllable parameters. Installers will find the fast-fix tool-free termination system a breeze, with the intuitive loop-in/loop-out functionality ensuring a rapid second fix. Knightsbridge is committed to brighter future, and as such, Ambar products are packaged in FSC approved packaging. - Choice of white or brushed chrome finish - Square edge design - Fully adjustable heads allow for directional aiming - Drop down lamp holder allows for rapid lamp installation and maintenance - Tool-free cable termination for rapid second fix - Compatible with Knightsbridge range of fire hoods* *check size and specific fire rating compliance with the relevant fire hood technical and installation data. | Features: Finish: White, Material: Aluminium, IP Rating: IP20, Length: 17.5cm, Width: 9.2cm, Projection: 0.3cm, Lamp Type: GU10, Bulb Included: No, Dimmable: Yes, Weight: 0.27kg, Wattage (max) : 2x10W

GBP 39.99
1

Netlighting Bulkhead with Clear Prismatic Diffuser and Aluminium Base 230V IP65 100W

Netlighting Bulkhead with Clear Prismatic Diffuser and Aluminium Base 230V IP65 100W

Bulkhead with Clear Prismatic Diffuser and Aluminium Base 230V IP65 100W | Description: 230V IP65 100W B22 Bulkhead - Aluminium base and clear prismatic cover- E27 lampholder (lamp not included) - Dimmable subject to lamp | Features: Finish: Grey Material: Aluminium Material: Polycarbonate IP Rating: IP65 Width (cm): 1.5 Length (cm): 24 Projection (cm): 11 Lamp Type: E27 Dimmable: Yes With Dimmable Bulbs Wattage (max): 100 Bulb Included: No Weight (kg): 0.6

GBP 33.99
1

Netlighting Knightsbridge Sena - 230V IP20 E27 Wall Spotlight - SE1W

Netlighting Knightsbridge Sena - 230V IP20 E27 Wall Spotlight - SE1W

Knightsbridge SENA - 230V IP20 E27 Wall Spotlight - SE1W | Description: SENA wall and ceiling pendants, forms part of Knightsbridge's new living, decorative range. Sena lines consist of wall light, 3 and 5 light semi flush pendants, in a beautiful smooth matt black and brushed gold finish. Ideal to use with exposed, decorative filament lamps to create a stylish and modern look and feel to most roomset. Single IP20 E27 wall light, suitable to be mounted with lamp facing upwards or downwards to create the desired look. - Smooth matt black and brushed gold finish - Dimmable subject to lamp 60W max. E27 (*lamp not included) | Features: Finish: Matt Black & Brushed Gold, Material: Pressed steel, IP Rating: IP20, Height: 12.5cm, Projection: 11.8cm, Lamp Type: E27, Bulb Included: No, Dimmable: Yes, Weight: 0.18kg, Wattage (max) : 60W

GBP 34.99
1

Netlighting Studio 1 Light Pendant Chrome Plate, E27

Netlighting Studio 1 Light Pendant Chrome Plate, E27

Studio 1 Light Pendant Chrome Plate, E27 | Description: Create that cool urban look with this industrial pendant. Simple in construction with a single smooth chrome plated lamp holder suspended from height adjustable black fabric flex. | Features: Finish: Chrome Plate, Material: Steel, IP Rating: IP20, Min Height (cm) : 22, Max Height (cm) : 162, Diameter (cm) : 10, No. of Lights: 1, Lamp Type: E27, Lumens: 700, Dimmable: Dimmable, Wattage (max) : 60W, Class: 2 (Double Insulated)

GBP 36.99
1

Netlighting LED Fire Rated Downlight Round Insulation Guard/GU10 Holder Satin Nickel IP65

Netlighting LED Fire Rated Downlight Round Insulation Guard/GU10 Holder Satin Nickel IP65

LED Fire Rated Downlight Round Insulation Guard/GU10 Holder Satin Nickel IP65 | Description: Discontinued - Fire Rated Downlight Round Satin Nickel with Insulation Guard and GU10 Holder Satin Nickel - This Fire Rated Downlight is a safe and attractive fitting for a GU10 or MR16 LED lamp. The fully open design does not conceal your lamp in a large metal canister, which can trap some of the heat it generates, lowering lamp lifetime and performance. Lamps installed in this fitting run at up to 10 degrees C cooler than a typical can-style fire rated downlight from leading LED brands - this can extend the lifetime of your lamps. As well being very tough thanks to its steel construction, This is also a highly aesthetic choice for Fire Rated lighting. The 1mm blend-in bezel is up to 10 times thinner than typical IP65 rated downlights and fits almost flush with your ceiling, so the downlight looks discreet and pleasing in any setting. This downlight is fire rated to 30, 60 and 90 minutes in compliance with BS476 Part 21:1987, Air Tightness compliant with Part C and Part L and Resistance to Sound compliant with Part E. Shown with Real Colour GU10 LED lamp (sold separately) | Features: Finish: Satin Nickel, Material: Steel, Depth (cm) : 8.3, Diameter (cm) : 11, Cut-out Diameter (cm) : 7.0-10.0, Lamp Type: GU10

GBP 24.99
1

Netlighting LED Fire Rated Downlight Round Satin Nickel GU10 Holder Satin Nickel IP65

Netlighting LED Fire Rated Downlight Round Satin Nickel GU10 Holder Satin Nickel IP65

LED Fire Rated Downlight Round Satin Nickel GU10 Holder Satin Nickel IP65 | Description: Discontinued - Fire Rated Downlight Round Satin Nickel with GU10 Holder Satin Nickel - This Fire Rated Downlight is a safe and attractive fitting for a GU10 or MR16 LED lamp. The fully open design does not conceal your lamp in a large metal canister, which can trap some of the heat it generates, lowering lamp lifetime and performance. Lamps installed in this fitting run at up to 10 degrees C cooler than a typical can-style fire rated downlight from leading LED brands - this can extend the lifetime of your lamps. As well being very tough thanks to its steel construction, This is also a highly aesthetic choice for Fire Rated lighting. The 1mm blend-in bezel is up to 10 times thinner than typical IP65 rated downlights and fits almost flush with your ceiling, so the downlight looks discreet and pleasing in any setting. This downlight is fire rated to 30, 60 and 90 minutes in compliance with BS476 Part 21:1987, Air Tightness compliant with Part C and Part L and Resistance to Sound compliant with Part E. Shown with Real Colour GU10 LED lamp (sold separately) | Features: Finish: Satin Nickel, Material: Steel, Depth (cm) : 3.8, Diameter (cm) : 11, Cut-out Diameter (cm) : 7.0-10.0, Lamp Type: GU10

GBP 23.99
1

Netlighting LED Fire Rated Downlight Round White Insulation Guard/GU10 Holder Matt White IP65

Netlighting LED Fire Rated Downlight Round White Insulation Guard/GU10 Holder Matt White IP65

LED Fire Rated Downlight Round White Insulation Guard/GU10 Holder Matt White IP65 | Description: Discontinued - Fire Rated Downlight Round White with Insulation Guard and GU10 Holder Matt White - This Fire Rated Downlight is a safe and attractive fitting for a GU10 or MR16 LED lamp. The fully open design does not conceal your lamp in a large metal canister, which can trap some of the heat it generates, lowering lamp lifetime and performance. Lamps installed in this fitting run at up to 10 degrees C cooler than a typical can-style fire rated downlight from leading LED brands - this can extend the lifetime of your lamps. As well being very tough thanks to its steel construction, This is also a highly aesthetic choice for Fire Rated lighting. The 1mm blend-in bezel is up to 10 times thinner than typical IP65 rated downlights, has a high quality powder coating and fits almost flush with your ceiling, so the downlight looks discreet and pleasing in any setting. This downlight is fire rated to 30, 60 and 90 minutes in compliance with BS476 Part 21:1987, Air Tightness compliant with Part C and Part L and Resistance to Sound compliant with Part E. Shown with Real Colour GU10 LED lamp (sold separately) | Features: Finish: Matt White, Material: Steel, Depth (cm) : 8.3, Diameter (cm) : 11, Cut-out Diameter (cm) : 7.0-10.0, Lamp Type: GU10

GBP 24.99
1

Netlighting LED IP65 Fire Rated Downlight Recessed Spotlight GU10 Holder Matt White IP65

Netlighting LED IP65 Fire Rated Downlight Recessed Spotlight GU10 Holder Matt White IP65

LED IP65 Fire Rated Downlight Recessed Spotlight GU10 Holder Matt White IP65 | Description: IP65 Fire Rated Downlight with GU10 Holder Matt White - This Fire Rated Downlight is a safe and attractive fitting for a GU10 or MR16 LED lamp. The fully open design does not conceal your lamp in a large metal canister, which can trap some of the heat it generates, lowering lamp lifetime and performance. Lamps installed in this fitting run at up to 10 degrees C cooler than a typical can-style fire rated downlight from leading LED brands - this can extend the lifetime of your lamps. As well being very tough thanks to its steel construction, This is also a highly aesthetic choice for Fire Rated lighting. The 1mm blend-in bezel is up to 10 times thinner than typical IP65 rated downlights, has a high quality powder coating and fits almost flush with your ceiling, so the downlight looks discreet and pleasing in any setting. This downlight is fire rated to 30, 60 and 90 minutes in compliance with BS476 Part 21:1987, Air Tightness compliant with Part C and Part L and Resistance to Sound compliant with Part E. Shown with Real Colour GU10 LED lamp (sold separately) | Features: Finish: Matt White, Material: Steel, IP Rating: IP65, Depth (cm) : 3.9, Diameter (cm) : 8.5, Cut-out Diameter (cm) : 7, Lamp Type: GU10

GBP 21.99
1

Netlighting Twin Bar Spotlight - Chrome, 230V GU10

Netlighting Twin Bar Spotlight - Chrome, 230V GU10

Twin Bar Spotlight - Chrome, 230V GU10 | Description: Twin GU10 chrome finish spotlight fitting with adjustable directional heads. Suitable for both wall or ceiling. Ideal for domestic and commercial use. Compatible with most GU10 LED and halogen retrofit lamps. Dimmable subject to lamp. | Features: Finish: Chrome, Material: Steel, IP Rating: IP20, Diameter (cm) : 32, Length (cm) : 36.6, Projection (cm) : 13.5, No. of Lights: 2, Lamp Type: GU10, Dimmable: Yes With Dimmable Bulbs, Wattage (max) : 2 x 50, Bulb Included: No, Weight (kg) : 0.524

GBP 33.99
1

Netlighting Cast Recessed Downlight Tilt 50W Matt White Paint

Netlighting Cast Recessed Downlight Tilt 50W Matt White Paint

Cast Recessed Downlight Tilt 50W Matt White Paint | Description: A new fixed and adjustable recessed downlight featuring an anti-glare baffle with minimal bezel. Baffle downlights reduce glare by having the light source set back within the downlight structure, which avoids direct human eye contact. Can be used with either GU10 LED lamp or the Pacto LED Module. The Baffle downlight has a choice of finishes available in either fixed or tilt versions. | Features: Finish: Matt White Paint, Material: Die Cast Aluminium Alloy, Height (cm) : 3.6, Diameter (cm) : 9.4, Projection (cm) : 0.2, Lamp Type: GU10 reflector, Wattage: 50W, Bulb Included: No, Dimmable

GBP 35.99
1

Netlighting Lightweight Stainless Steel Adjustable Wall Light, 230V IP65 GU10 35W

Netlighting Lightweight Stainless Steel Adjustable Wall Light, 230V IP65 GU10 35W

Lightweight Stainless Steel Adjustable Wall Light, 230V IP65 GU10 35W | Description: IP65 35W GU10 Stainless Steel Grade 304 Mains Single Adjustable Wall Light. GU10 35W lamp (not supplied with fitting) Electrical termination via 10 Amp internal connector block at base. Light 1mm gauge. Surface mounted wall light. Dimmable | Features: Finish: Stainless Steel, Material: 304 Stainless Steel, IP Rating: IP65, Diameter (cm) : 60, Projection (cm) : 15.5, No. of Lights: 1, Lamp Type: GU10, Dimmable: Yes With Dimmable Bulbs, Wattage (max) : 35, Bulb Included: No, Weight (kg) : 0.52, Number of Lights: 1 & 2 Light, Voltage: 230: 15: 1

GBP 27.99
1

Netlighting Knightsbridge Dipa Twin Tilt Square Anti-Glare Downlight White - DIC2TSW

Netlighting Knightsbridge Dipa Twin Tilt Square Anti-Glare Downlight White - DIC2TSW

Knightsbridge Dipa Twin Tilt Square Anti-Glare Downlight White - DIC2TSW | Description: Dipa is designed for residential, commercial, and hospitality applications that require discrete, low glare lighting. The options include fixed and tilt, in a white or black finish with either a single or a twin lamp (supplied separately) These configurable options, combined with Dipa's unique design, give the freedom to create cutting edge architectural schemes. The complete range is compatible with Knightsbridge GU10 light sources, with dimmable, non-dimmable, and SmartKnight options, boasting a wide array of colour temperatures and controllable parameters. Installers will find the fast-fix tool-free termination system a breeze, with the intuitive loop-in/loop-out functionality ensuring a rapid second fix. Knightsbridge is committed to brighter future, and as such, Dipa products are packaged in FSC approved packaging. - Choice of white or black finish - Unique anti-glare design - Fixed and tilt options - Drop down lamp holder allows for rapid lamp installation and maintenance - Tool-free cable termination for rapid second fix - Compatible with Knightsbridge range of fire hoods* *check size and specific fire rating compliance with the relevant fire hood technical and installation data. | Features: Finish: White, Material: Die-cast aluminium, IP Rating: IP20, Length: 18.5cm, Width: 9.3cm, Projection: 0.3cm, Lamp Type: GU10, Bulb Included: No, Dimmable: Yes, Weight: 0.2kg, Wattage (max) : 2x10W

GBP 41.99
1