mcb.dk | Få success online

Monument 2647Z Plastic Pipe Cutter 60mm MON2647

Monument Plastic Pipe Cutter effective on PVC, polybutylene, MDP, polyethylene, HEP20, plastic overflow pipe, plastic electrical conduit, supertube, mini trunking, rubber hose, pneumatic pipe and electrical sleeving. Simply place the cutter over the pipe to be cut and gently twist while you depress the handles to get a good clean cut.

GBP 74.99

1

Monument Autocut Copper Pipe Cutter (Twin Pack) MON17151721

The Monument Autocut Copper Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel. This set contains 1 x 1715C Autocut Copper Pipe Cutter 15mm 1 x 1721V Autocut Copper Pipe Cutter 21mm

GBP 43.99

1

Monument 1739Y Autocut Easyslice Kit 15mm & 22mm MON1739

The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel. Made in Britain.

GBP 59.99

1

Monument 1512L Pipe Dry Testing Kit MON1512

Monument Pipe Dry Testing Kit is ideal for dry testing pipework during and after installation. The 1512 has an easy to read triple scale bar in psi and kPa scales and is suitable for water, air, gas and petroleum oil pipes up to 4 bar, and for testing combi systems. Can be left on test, while flooring is laid to reveal any nail damage. It can also test hot and cold supplies separately to ensure pipes are not crossed. The Monument 1512 is fitted with a Schrader Valve and 15 mm push-fit fitting for quick and easy assembly and has a rubber boot for added protection.

GBP 46.99

1

2030B Olive Cutting Tool 15mm MON2030B

The Monument Olive Cutting Tool is designed to remove an olive from copper pipe without damaging the pipe and without producing swarf/debris. NOTE DO NOT attempt to remove stainless steel olives with this tool. Made in Britain.

GBP 54.99

1

Monument 2030B Olive Removing Tool

These Olive Removal Tools from Monument Tools were designed to remove an olive from a copper pipe without causing damage to the pipe or producing swarf. Features and Benefits Carbo nitrided carbon steel cutting blades Specifically designed to remove copper and brass olives Warning Do not attempt to remove stainless steel olives with this tool

GBP 53.99

1

Monument 2036T Olive Puller 15/22mm MON2036

The Monument 2036T Olive Puller is ideal for removing olives from copper piping without damaging the attached pipe. Suitable for 15mm and 22mm copper pipe. This puller simply utilises the compression fitting locking nut to remove the olive from the tube. With all the major parts of the tool turned from brass, this olive puller provides a quick and reliable remedy to removing most olives. Made in Britain.

GBP 45.99

1

Monument Plumber's Drain Down Hose 15m MON2404

The Monument Drain Down Hose is designed to lay flat when draining down a central heating system. Unlike standard hose pipe, when uncoiled the hose lays flat, allowing water to flow with gravity. Complete with a hose clip to affix to the drain off cock. The silicone rubber hose can be coiled neatly with hook & loop fasteners for storing/transporting. Specification Length 15m Internal diameter 12mm Outside diameter 19mm

GBP 56.99

1

Monument 174Z Air Testing U-Gauge Kit MON174

Monument Air Testing U-Gauge Kit containing all the items (except testing plugs) needed to carry out an air test to 100mm (4in) water gauge pressure on any size of drain or pipe. The kit is housed in a display box with full instructions. Contains 1 x U-Gauge 1 x Hand Bellows Pump 1 x 1/2in BSP Nipple Cap 1 x 1in BSP Nipple Cap 1 x Y-Piece 3 x 600mm lengths of Rubber Hose

GBP 53.99

1

Monument Pro Air Bag 100mm (4in) MON2290

The Monument Air Bag is a durable, quality, flexible drain plug for plugging drains and pipes. Fitted with peripheral ribs that give a better seal and grip on the tube or pipe being repaired or replaced. It has a long feed hose that is fitted with a Schrader valve to quickly release the pressure. For use with Monument drain testing equipment. Inflate with MON1308 pump. Specification Size 100mm (4in) Maximum Inflation Pressure 0.59 bar / 8.5 psi

GBP 59.99

1

Monument 460U Tap Reseating Tool 1/2 in & 3/4 in BS1010 MON460

Monument Tap Reseating Tool 1/2in & 3/4in re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top. For taps with recessed threads in the body, use the parallel bush series. Cutters are case hardened. The feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits old series 1/2in and 3/4in BS1010 flat seats. Complete with 17, 19, 20 and 25mm (11/16in, 3/4in, 13/16in, 1in) flat cutters and 2 tapered cones.

GBP 52.99

1

Monument 455E Tap Reseating Tool 1/2in & 3/4in BS5412 BS1010 MON455

Monument Tap Reseating Tool 1/2in & 3/4in re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Parallel bushes for use where the internal thread will not allow the entry of tapered cones. For taps with recessed threads in the body, use the parallel brush series. Cutters are case hardened and the feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits 1/2in and 3/4in BS1010 new series and BS5412 Flat and Bevelled seats. Complete with 17, 19, 20, 25 mm (11/16in 3/4in 13/16in 1in) flat cutters and 11/16in, 13/16in (17,20mm) Bevelled Cutters. Two double bushes.

GBP 62.99

1

DIGITAL MARKETING

Brand

Size

Merchant

Price (EUR)