mcb.dk | Få success online

Kennedy Castors 5X2 TPR 2 X Fix, 2XSWIV, Full Brake: Ken Pro

Replacement Castors to suit Kennedy, Senator and Yamoto cabinets and chests.

GBP 59.99

1

Kennedy H&G Extension Socket 4MTI/S x 5MT Outside

Extension Sockets A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.

GBP 69.99

1

Kennedy H&G Extension Socket 5MTI/S x 4MT Outside

Extension Sockets A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.

GBP 69.99

1

Kennedy H&G Extension Socket 3MTI/S x 4MT Outside

Extension Sockets A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.

GBP 46.99

1

Kennedy H&G Drill Sleeve 5MT Inside x 6MT Outside

Morse Taper Drill Sleeves are a range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally conforming to ISO 238 BS 1660 : 2. Features and Benefits Manufactured from high quality steel and case hardened all over Fully hardened and ground internally and externally Standards ISO 238 BS 1660: 2

GBP 52.99

1

Kennedy H&G Drill Sleeve 4MT Inside x 6MT Outside

Morse Taper Drill Sleeves are a range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally conforming to ISO 238 BS 1660 : 2. Features and Benefits Manufactured from high quality steel and case hardened all over Fully hardened and ground internally and externally Standards ISO 238 BS 1660: 2

GBP 49.99

1

Kennedy 24.0 x 450mm SDS-Plus Hammer Drill Bit

Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. Features and Benefits High performance drill bits that withstand extreme heat generation Ensures maximum performance combined with wear resistance Standards Met Manufactured to DIN 8035 Notes For all hammer drills with SDS, SDS Plus system

GBP 51.99

1

Kennedy 205 P20/P30 Brazed Tool

Kennedy Brazed Tip Turning & Boring Tools are manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards. P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.

GBP 45.99

1

Kennedy 177 P20/P30 Brazed Tool

Kennedy Brazed Tip Turning & Boring Tools are manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards. P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.

GBP 44.99

1

Kennedy 176 P20/P30 Brazed Tool

Kennedy Brazed Tip Turning & Boring Tools are manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards. P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.

GBP 44.99

1

Kennedy 2146 P20/P30 Brazed Tool

Kennedy Brazed Tip Turning & Boring Tools are manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards. P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.

GBP 44.99

1

Kennedy 204 P20/P30 Brazed Tool

Kennedy Brazed Tip Turning & Boring Tools are manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards. P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.

GBP 45.99

1

Kennedy 116 P20/P30 Brazed Tool

Kennedy Brazed Tip Turning & Boring Tools are manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards. P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.

GBP 50.99

1

Kennedy Plastic Valve 1/4" Turn 1/4" NPT Male 1/4" Bore

ValvesThread fittings fully compatible with BSPT. In-line check valves stop fluid drip when flow stops, keeping hose full and reducing initial dry cutting.Can be used with coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable. Manufactured from Acetal - non-conductive and chemical resistant. Available with 1/4, 1/2 and 3/4 bore. Hose is blue, all other fittings are orange. Threaded fittings are fully compatible with BSPT.

GBP 50.99

1

Kennedy EJE Soft Scroll Jaws 5" (3-SET)

To Suit Pratt Burnard Chucks For Standard, Super Precision, Griptru, All steel (type 78), Pratt Burnard old type (Inch) and Hardinge chucks.

GBP 84.99

1

Kennedy EJC Soft Scroll Jaws 4" (3-SET)

To Suit Pratt Burnard Chucks For Standard, Super Precision, Griptru, All steel (type 78), Pratt Burnard old type (Inch) and Hardinge chucks.

GBP 82.99

1

Kennedy EJB Soft Scroll Jaws 3.1/4" (3-SET)

To Suit Pratt Burnard Chucks For Standard, Super Precision, Griptru, All steel (type 78), Pratt Burnard old type (Inch) and Hardinge chucks.

GBP 79.99

1

Kennedy 150mm (Set of 10) Zinc Stencil Figures

These number stencil sets all contain 10 pieces, with numbers 0-9, in varying sizes depending on your selection. The stencils are manufactured from hard-wearing quality steel (except for products KEN-561-1500K and KEN-561-2000K which are manufactured from xinc) with precision cut letters for a clean sharp image. Suitable for use with all paints and marking compounds for marking packing cases with shipping details, loading/work bay walls for identification, car park spaces and countless other applications. Features and Benefits Each number is waterproof and resistant to corrosion for overall product longevity All sets contain numbers 0-9 for a wide scope of use All stencils are manufactured from steel (except KEN-561-1500K and KEN-561-2000K which are manufactured from zinc) for durability Available in a range of sizes to suit your exact needs Typical Applications Industrial Warehousing DIY

GBP 55.99

1

Kennedy 200mm (Set of 10) Zinc Stencil Figures

These number stencil sets all contain 10 pieces, with numbers 0-9, in varying sizes depending on your selection. The stencils are manufactured from hard-wearing quality steel (except for products KEN-561-1500K and KEN-561-2000K which are manufactured from xinc) with precision cut letters for a clean sharp image. Suitable for use with all paints and marking compounds for marking packing cases with shipping details, loading/work bay walls for identification, car park spaces and countless other applications. Features and Benefits Each number is waterproof and resistant to corrosion for overall product longevity All sets contain numbers 0-9 for a wide scope of use All stencils are manufactured from steel (except KEN-561-1500K and KEN-561-2000K which are manufactured from zinc) for durability Available in a range of sizes to suit your exact needs Typical Applications Industrial Warehousing DIY

GBP 84.99

1

Kennedy Open Ended, Spigot End Spanner, 16mm Spigot, 26mm

These open ended spigot ends are designed for attaching to spanners. All products have a 16mm bore and are designed to suit metric spanners. All spigot ends are manufactured from durable chrome vanadium steel. Features and Benefits Available to suit a variety of metric spanner sizes to suit your requirements Easy to attach to a suitable spanner for ease of use Manufactured from chrome vanadium steel for durability Typical Applications Automotive Construction Plumbing

GBP 45.99

1

Kennedy TTS018 Standard Rigid Head TIG Torch 350DC/250AC - Water Cooled x 3.8 MTR Cable

Whether water or air cooled, all Kennedy Tig torches are lightweight and durable. They come supplied with a 12.5ft (3.8m) cable, and silicon rubber rigid or flexible head mouldings for greater heat resistance.

GBP 65.99

1

Kennedy No.8 25 x 20mm L/H HSS Butt Welded Lathe Tool

Manufactured from top quality sintered steels. For use on a wide range of applications from roughing to finishing. Manufactured to BS1296:Part 3:1978. For all dimensional and technical specifications please refer to our catalogue.

GBP 49.99

1

5x Kennedy Flexible Backing Pad Quick Release 178mm M14X2.0

Suitable for use with all portable and air disc sanders. Recommended for use with York abrasive discs. Features and Benefits Flexible yet durable construction High quality backing pads Helps with easy sanding of awkward and uneven shapes

GBP 64.95

1

20x Kennedy 5/8X2" Inch Plain Dowel Pin

Hardened and precision ground. Conform with DIN 6325. Inch: Sizes 1/16 and 1/8 are manufactured from non-hardened silver steel, 3/16 and above are high quality case hardened mild steel. Tolerances: All sizes = +0.001 +0.003.

GBP 75.80

1

100x Kennedy 5/16X2" Inch Plain Dowel Pin

Hardened and precision ground. Conform with DIN 6325. Inch: Sizes 1/16 and 1/8 are manufactured from non-hardened silver steel, 3/16 and above are high quality case hardened mild steel. Tolerances: All sizes = +0.001 +0.003.

GBP 46.00

1

DIGITAL MARKETING

Brand

Colour

Size

Merchant

Price (EUR)

Kennedy Castors 5X2 TPR 2 X Fix, 2XSWIV, Full Brake: Ken Pro

Kennedy H&G Extension Socket 4MTI/S x 5MT Outside

Kennedy H&G Extension Socket 5MTI/S x 4MT Outside

Kennedy H&G Extension Socket 3MTI/S x 4MT Outside

Kennedy H&G Drill Sleeve 5MT Inside x 6MT Outside

Kennedy H&G Drill Sleeve 4MT Inside x 6MT Outside

Kennedy 24.0 x 450mm SDS-Plus Hammer Drill Bit

Kennedy 205 P20/P30 Brazed Tool

Kennedy 177 P20/P30 Brazed Tool

Kennedy 176 P20/P30 Brazed Tool

Kennedy 2146 P20/P30 Brazed Tool

Kennedy 204 P20/P30 Brazed Tool

Kennedy 116 P20/P30 Brazed Tool

Kennedy Plastic Valve 1/4" Turn 1/4" NPT Male 1/4" Bore

Kennedy EJE Soft Scroll Jaws 5" (3-SET)

Kennedy EJC Soft Scroll Jaws 4" (3-SET)

Kennedy EJB Soft Scroll Jaws 3.1/4" (3-SET)

Kennedy 150mm (Set of 10) Zinc Stencil Figures

Kennedy 200mm (Set of 10) Zinc Stencil Figures

Kennedy Open Ended, Spigot End Spanner, 16mm Spigot, 26mm

Kennedy TTS018 Standard Rigid Head TIG Torch 350DC/250AC - Water Cooled x 3.8 MTR Cable

Kennedy No.8 25 x 20mm L/H HSS Butt Welded Lathe Tool

5x Kennedy Flexible Backing Pad Quick Release 178mm M14X2.0

20x Kennedy 5/8X2" Inch Plain Dowel Pin

100x Kennedy 5/16X2" Inch Plain Dowel Pin

Powered by Cobiro